TCP Syslog output for routers and switches

I am installing a Log Correlation Server at a Customer site whom is very heavy Cisco.
I have a 3825 at their Border, ASA boxes on both sides of the DMZ, and 40 + cisco Switches in the Infrastructure routing between Production VLAN's.
One of the features fo the Logging Server is the ability to accept TCP connections for Syslog.
Does this functionality also exist on the 3825 Router? How about a 3550 switch? Or a 4500 switch?
Thanks

It exist on all of those product.
www.linuxhomenetworking.com/cisco-hn/syslog-cisco.htm
This link give a quick overview but you will find how to configure syslog in the product documentation.
Please rate all helpful post

Similar Messages

Syslog for router and switch

Hi all,
Any one help me to configure router and switch log on windows server. I dont have any idea please send me link or guide to configure syslog server on windows. For PPTP vpn users also.

Hi,
Are you asking, "How do I set up my Windows server as a Syslog Server"... in order to receive messages from your routers and switches?
If so, I'd suggest a google search on syslog server - locate and download the software there, and it should have a configuration guide with it.
Was this the information you were looking for?
Curtis

Ask the Expert: Packet Capture Capabilities of Cisco Routers and Switches

With Rahul Rammanohar
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about packet capture capabilities of Cisco routers and switches.
In May 2013, we created a video that included packet capture capabilities across multiple Cisco routers and switches. For each product, we began with a discussion about the theory of the capabilities, followed by an explanation of the commands, and we concluded with a demo on real devices. In this Ask the Expert event, you’re encouraged to ask questions about the packet capture capabilities of these Cisco devices:
•       7600/6500: mini protocol analyzer (MPA), ELAM, and Netdr
•       ASR9k: network processor capture
•       7200/ISRs: embedded packet capture
•       Cisco Nexus 7K, 5K, and 3K: Ethanalyzer
•       Cisco Nexus 7K: ELAM
•       CRS: show captured packets
•       ASR1K: embedded packet capture
More Information
Blog URL: Packet Capture Capabilities of Cisco Routers and Switches
Watch the Video: https://supportforums.cisco.com/videos/6226
Hitesh Kumar is a customer support engineer in the High-Touch Technical Services team at Cisco specializing in routing protocols. He has been supporting major service providers and enterprise customers in routing, Multiprotocol Label Switching (MPLS), multicast, and Layer 2 VPN (L2VPN) issues on routing platforms for more than three years. He has more than six years of experience in the IT industry and holds a CCIE certification (number 38757) in service.
Rahul Rammanohar is a technical leader with the High-Touch Technical Support Team in India. He handles escalations in the area of routing protocols and large-scale architectures for devices running Cisco IOS, IOS-XR, and IOS-XE Software. He has been supporting major service providers and large enterprise customers for routing, MPLS, multicast, and L2VPN issues on all routing platforms. He has more than 13 years of experience and holds a CCIE certification (number 13015) in routing/switching and service provider.
Remember to use the rating system to let Hitesh and Rahul know if you have received an adequate response.
Because of the volume expected during this event, Hitesh and Rahul might not be able to answer each question. Remember that you can continue the conversation in the Service Provider, sub-community forum shortly after the event. This event lasts through November 1, 2013. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hello Erick
    Thanks for the topology. The trigger will be different for labelled packet as you would need to mention the values of labels too in the trigger.
     Below are two examples of one or two labels being used, it depends on where you are capturing the packet in mplsvpn scenario which will decide teh number of labels being imposed on the packet.
Trigger for one label. (if the router on which you are capturing the packet PHP is being performed)
VPN label - 5678
Source Address - 111.111.111.111
Destination Address - 123.123.123.123
show platform capture elam trigger dbus others if data = 0 0 0 0x88470162 0xE0000000 0 0 0x00006F6F 0x6F6F 7B7B 0x7B7B0000 [ 0 0 0 0xffffffff 0xf0000000 0 0 0x0000ffff 0xffffffff 0xffff0000 ]
Trigger for two labels. (for other core routers)
IGP label - 1234
VPN label - 5678
Source Address - 111.111.111.111
Destination Address - 123.123.123.123
show platform capture elam trigger dbus others if data = 0 0 0 0x8847004D 0x20000162 0xE0000000 0 0 0x00006F6F 0x6F6F7B7B 0x7B7B0000 [ 0 0 0 0xffffffff 0xf000ffff 0xf0000000 0 0 0x0000ffff 0xffffffff 0xffff0000 ]
    You can check the labels being used (by using show ip cef <> details) and covert their values to hex and change the trigger accordingly.
     I have changed the colors for better understanding. If you notice carefully in the trigger the values for ip address, labels have just been converted to their respective hex values which could be replaced.
     Please let me know if this helps.
Thanks & Regards
Hitesh & Rahul

SNMP MIB to configure the routers and switches

I have snmp write community string configured on all routers and switches. I am looking for a SNMP MIB to configure a command to Cisco routers and switches using SNMPSET option. Can some one point me in right direction for SNMP MIB values to write commands on routers and switches ?

Hi,
there are many, many mibs. Depends on what you are interested about, use search function on CCO. This is voip forum, there is another for network management.

VLAN Support at routers and switches

is there a table with howmany VLANs each of cisco routers and switches can support.
its not always written at the product data sheet.

hi
Do find the details for 1800 ISR series router..
802.1Q VLAN
A total of eight VLANs can be configured to segment a network and offer additional security and separation of network traffic.
VLAN Support
802.1Q VLAN supported on all 10/100BASE-T ports
VLAN Configured
8 VLANs
Wireless VLANs
16
7400 series has reached EOL/EOS status hence i couldnt find any datasheet for that model..
regds

Switch Sign For Flow and Switch Type for Flow

Hi Can any one Please make me clear at least with 3 examples how to understand Switch Sign for Flow and Switch Type for Flow
and also the good example with Balance Recurring Account Types

Hi Chennai,
Consider an account "Fixed-Assets" supported by movement analysis in Custom1, as follows:
ClosingBalance
OpeningBalance
Additions
Disposals
If you mark the Custom1 member Disposals as SwitchSignForFlow, you will enter positive values in Disposals but HFM will subtract from the other two members to calculate the Closing Balance. You may use this functionality if your client prefers to see all values as positive on the reports.
Using the same example, you might recognize that while Closing and Opening balances are of balance type (they provide a snapshot of the account at a specific instant meaning that you see the same number whether you view the YTD or Periodic values of the account), Additions and Disposals are movements, which means that they accumulate during the same year starting from a zero balance on 1/1/201X and therefore you will see different numbers depending on viewing the YTD or Periodic values of the account. In order to provide with this behavior you have to mark both Additions and Disposals with SwitchTypeForFlow. If you don't they will behave as the underlying account (the Fixed-Assets account) and like the other two Custom1 members, Opening and Closing balance members.
As for the BalanceReccuring, an account of this type behaves like a normal Balance account, but once you input a number in an intermediate period (say June), the same number will be copied to all following periods (July-December) until you override the numbers by explicitly inputting new values. With a normal balance account, all following periods will be empty.
--Kostas

Slow network speed after connecting to routers and switch

Hello
The following is my test setup I have running at my house for some practice and leaning
Some reason the PC1 which is a laptop is getting very horrid internet / download speeds, and I am trying to narrow down why.
Example, on my main desktop that is connected right to the Arris Cable modem / router I get around 34Mbps down. But the laptop that is connected in the topology above, is getting 0.06 Mbps down
I am not sure if there are settings that need to be checked on the routers or what could cause this, I am figuring the traffic is bogging at some place.
Thanks

Update on some things I have tried
As I am not sure the cause, I have been reading and trying different things, last thing was to set the interfaces to Duplex Full
I did this on both the Ethernet ports on the routers, and both of the Fast Ethernet ports being used on the switch, but has not changed the speed that PC1 is getting.
Also turned on CEF on both routers

Power consumption for router and switch

I have a linksys EZSX88W switch which I checked power consumption of 70ma idle. It's supplied by the adapter which has an output of 1000ma. Not sure what the consumption when switch is being used. I also have an WRT54GS but haven't checked consumption yet, but it's powered by the same 1000ma adapter. In an effort to save energy-that -GREEN FEELING- I was thinking of using on power adapter to power bothe the router and switch. Has anyone tried this yet?? Also if I posted this in the wrong area I hope the moderator will move the post.
thanks

So you are thinking of Powering on both the Devices using a single Power Adapter? Well never tried to make both the devices use a single power adapter. As far as i think its not possible. But if you still wish, you can give a try and check if that works for you or not.

Restrict Output for Fax and Print in Sales Order

Hi,
I am having a sales order output with two output types - Fax and Print. I need to restrict one page "Terms & Conditions" to be printed only once when I select the output type as FAX. But if the output type is PRINT, I have to print the page "Terms & Conditions" after every page i.e in even numbers since it is getting printed on both sides of the paper.
Can anyone help me on this.
Thanks in Advance.

Hi,
For pages->Conditions->write condition for ,when it should trigger.
output type eq Printer.
Regards,
Shiva Kumar

Time and date are set incorrectly on the routers and switches

I've just noticed that the date and time on all my Cat4006's, Cat3548's and Cat6000 were grossly incorrect. I was wondering if this would contribute to problems I am having on the network. Does the switches/routers check the timestamp on the packets it's passing and/or append or add thereto?

Date and time set on routers and swithces will not affect your user data traffic.
Keeping Date and time synchronized across network devies will help if you are troubleshooting your network.
If you need to keep date and time synchronized across all the network devices, use NTP (Network Time Protocol)

MainStage 2: Separate outputs for vocals and MIDI synths?

I'm using a firewire interface with 8 outputs, 8 inputs, and midi input. Can I run vocals through the audio inputs, through MainStage, then send the vocal signal to a different output (for going to a PA) than the MIDI audio signals (for going to my amp)?

Hi
Yep
Simply rout ethe appropriate channels out through the correct output pairs on your audio interface
CCT

How to disable output for Delivery and shipment

Hi experts
I would like to disable the output for the delivery and shipment. Please let me know any code logic or function module for this.
Thanks and regards,
Jayakumar Mani.

Hi,
Use the requirement routine in transaction code NACE -> Procedures.
Regards
Vinod

Achieving Redundancy with Cisco Routers and Switches

I have two 2600 routers connected to two different ISP and in turn these are connected back to our head office to a 3560 series switch.Iam trying to set up the different connections such that if one ISP connection fails the other one takes over immeadiately.I know i could use HSRP for redundancy but the problem iam facing is the two routers are in different subnets, so it may not be possible to use HSRP in this case.I could be wrong but any help will be appreciated.

Hi,
some questions to ask you
1- 3550 is working as L3 or L2
if L3 than you can use static route pointing to two different router.if L2 than use secondary address in ethernet infaces of router and run HSRP but for this you need to match vlan.
2- if intervlan is configured on router's than it will be very easy.
HTH if not write here

Dual monitor use audio output for movie and other for MBP

is it possible im watching a movie on one and wated to answer factime call or watch youtube on my mbp and just screamed out my tv speakers.....i want fual monitoring but separate audio any help?

Other alternatives include
I know on mackbooks I've seen firewire used as an input for a Weiss Dac if you're into two channel audio. Do any reiceivers take firewire as an input for hometheater? Has anyone tested Firewire outputs on their W series? I'm told that firewire is sometimes preferable to USB, I'm not sure why this would be, can USB support passthrough of DTS encoded signals?
In the case that firewire works and you Do not have a firewire source, maybe something like this would be of value It converts firewire to digital coaxial s/pdif and allows passthrough of DTS and AC3.
http://www.m-audio.com/images/global/manuals/FireWire-Audiophile_Manual.pdf
As I'm into audio the critical thing here (and what you're paying for when you purchase blue-ray, is maintaining the digital information from the disk in an unconverted form. You want a direct bit pass through, and you want as little jitter introduced to the signal as possible. You most certainly don't want the sound card getting in the way, Digtital to Analog converting and then reverse packaging it up and putting it out over the soundcard digital out. My problem is I'm not familiar enough with computer audio to know how exactly the sounds is transmitted from your blue ray drive to the digital interface you've chosen.
Anyone know why USB digital out would not be a prefered method?
Moderator note; comment removed which contravened forum rules

How can I move my wife's account under my apple ID to a new Apple ID for her and switch to family sharing?

I have 4 devices under my apple ID. 1 iPAD is used by my wife and has her own mail account setup. With family sharing, I would like to move that account to an Apple ID of her own and add her to the family list. How do I do that?

Hello Godde
Lets start with checking out the articles below for setting up Family Sharing and more information about Apple ID’s. I will say that you will not be able to transfer any purchases to a different Apple ID, but you can rename the Apple ID. If you want to use Family Sharing, then you will need to just create a new iCloud account and then follow the steps in the second article to start sharing content between you to.
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
Sharing purchased content with Family Sharing
http://support.apple.com/kb/HT201085
Regards,
-Norm G.

TCP Syslog output for routers and switches

Similar Messages

Maybe you are looking for