TCS is configured as per the standards but not working

Hi Experts,
I have configured TCS as per the standdard Practice which assigned in the customer master record.
But not trggerring while doing FI Invoice.
Thanks Regards,
Dude

Hi Expert,
Check the below configuration steps:
1.    Define Withholding Tax key (206C)
2.    Define Withholding Tax type
3.    Create the access sequence for withholding for TCS in SD (Copy the existing access sequence J1AW and create the new access sequence)
4.    Create condition types corresponding to Tax collected at Source in SD
5.    Assign withholding tax types to SD condition types
6.    Define withholding tax codes
7.    Assign GL accounts for withholding tax types
8.    Add TCS conditions in pricing procedure (assign TCS conditions in pricing procedure as a statistical conditions)
9.  We will need to define a new condition type and add this to the pricing procedure to post to the FI. This condition type will be manual and can be manually filled at the time of creation of sales order. This can also be copied from the statistical TCS condition types in the pricing procedure
Regards,
GK
SAP

Similar Messages

  • Display Driver for TPC-2006 trying as per web soultion but not working

    Hi friendz
        Hope u all doing great. Actually we working on project for waste water treatment plant. Here its supplied with NI PAC and Touch panel 2006. Now the issue is in touch panel 2006 the displays are not clear and my client not happy with it.When i try yur web solution for Display Driver for TPC-2006 downloaded files are not running in touch panel, but for your information since i dont have card reader in my work bench computer i copied the file in different way dont know whether its correct r wrong. Steps i did was
    - Downloaded files into my desktop computer first
     - Then Inserted blank Compact Flash (CF) into touch panel.
    -  Through activesync synchronized flies between desktop and touch panel.
    - Copied downloaded files into compact flash.
    - Power off touch panel and power on no change.
    If the steps gone through correct means why files not running any other solution. If wrong is there any other way coz i dont hv card reader rite now.
    Pravin Jayapaul
    Application Engineer

    Pravin,
    Did you get the following warning when you tried to activesync the files to your touchpanel? 
    That's the reason why you should transfer the files over with a card reader. Also, make sure your CF card is at least 256MB in size. 
    Message Edited by mishkin on 03-28-2009 01:55 PM
    Misha
    Attachments:
    warning.png ‏4 KB

  • Enahcement transported successfully in the prd but not working

    Hi,
    I am facing a wiered problem where I have created an implicit enhacement in a class , it works absolutely fine in the dev and is moved to PRD, the tyrasnport is successfull and the enhacement is active but changes are not reflecting on the screen.
    Please let me know why this is behaving like this.
    Thanks
    Pooja

    Hi
    Marcin is right. To know how to check it, go the version managament for these objects and check what is the last request in development enviroment.
    Regards
    Eduardo

  • Start routine: only once per teh load but not once per data packet

    Hi,
    I would like to execute some code in start routine (in update rules) only once per the load but not once per the data packet.
    How can I implement this.
    Regards,

    I once had that same requirement, but in a datasource in R3. I'm not sure if the same solution would work in BW, though. I used a memory id to keep the variable value between packets:
    DATA: ... n_globalvar TYPE n ...
    then I added...
    IMPORT n_globalvar FROM MEMORY ID 'ZMEMID01'.
    ...at the start of the routine to retrieve to the variable the value from the memory id.
    At the end of the code, I exported the variable back to the same memory id...
    EXPORT n_globalvar to MEMORY ID 'ZMEMID01'.

  • Firefox does not open, but instead gives the error message, "Failed to read the configuration file." It has worked in the past, but not now.

    Firefox does not open, but instead gives the error message, "Failed to read the configuration file." It has worked in the past, but not now.
    I REINSTALL 10 TIMES SO DON'T TELL ME THAT!!!
    I'm piss because i need firefox working again so i can finish reseaching my speech in 5 days.

    Which files do you have in the defaults\pref folder in the Firefox program folder?
    *(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
    *(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
    See also "Other solutions":
    *http://kb.mozillazine.org/Preferences_not_saved
    Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 22.0: http://www.mozilla.org/en-US/firefox/all.html
    Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
    *Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
    *(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • I have an ipad  and a iphone 5, when i start find mi iphone from the ipad or in the iphone only display the iphone, but not mi ipad it displays with conection, ubication not avaliable, i configure the same apple id in bot devices, and a diferent apple id

    i have an ipad  and a iphone 5, when i start find mi iphone from the ipad or in the iphone only display the iphone, but not mi ipad it displays with conection, ubication not avaliable, i configure the same apple id in bot devices, and a diferent apple id, can help me?

    IOS: using facetime http://support.apple.com/kb/ht4319
    using an ipad will use the email address since you can't make a phone call.  see the link.
    Your basically calling/emailing yourself that's why your getting a busy signal.

  • HT202643 OK so I rolled back to Java 1.6 per the instructions but!!!

    OK so I rolled back to Java 1.6 per the instructions but now the Java icon doesn't work in system pref's anymore. Not sure if that will cause a problem but it would be nice if that button worked again. Is there a fix for this?

    Thanks for the heads up Kappy.  Do you know how to remove the button from Sys Pref's? The newer version of Java was saved per the instructions so I guess the Icon will come back if necessary when I upgrade again. I rolled back for PhpStorm IDE which doesn't seem to like the most recent version of Java from Oracle.

  • How do I set upmy Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time.  I can use one or the other, but not both.

    how do I set up my Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time.  I can use one or the other, but not both.  From systems Preferences I must select one or the other.  I want both to work all the time.

    Hi,
    I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
    1. DS: 0FI_AP_4  replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
    2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
    3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
    4. Load the same to a InfoCube (0FIAP_C03).
    Hope this helps.
    Thanks.
    Nazeer

  • My movies and music videos won't show up on screen, I can hear the sound but not see the video how do I fix this?

    My movies and music videos won't show up on my computer screen, I can hear the sound but not see the video how do I fix this? I'm not sure what to do as far as turning my purchased movie into DVD goes either. I just want to put the movie onto a DVD disc but my itunes won't even show that I have a blank disc in the drive, I'm not sure what is wrong or how to fix this, any help at all would be much appreciated.

    Hi @anthony7722 ,
    Thank you for your query, I will do my best to help!
    I grasp that you uninstalled the Intel graphic driver and the catalyst control.  You reinstalled the Intel driver and now you can view and hear videos on the Internet but you are unable to set the resolution as high as previously.
    When I checked the specifications for your notebook I see that you have switchable graphics.
    Here are two links that I believe will help.
    Overview of Switchable Graphics or Dual GPUs
    Switchable Graphics on Notebooks Configured with Intel and ATI GPUs
    Here is a link to HP Pavilion dv7-6150eb Entertainment Notebook PC Drivers
    Please try this process.
    1. Download the chipset driver, and both graphic drivers and save them  but do not install them yet
    2, Delete the chipset driver and install the updated one.
    3. restart your notebook
    4.Delete the Intel driver and install the updated one
    5. restart your notebook
    6. Delete the AMD driver and install the updated driver. 
    You should now have a Catalyst Control Center.
    This should now allow you to use the higher graphic card which should support the higher resolution.
    I hope this helped.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • I can only backup the datafiles but not the control files and SPFiles

    Hello, all,
    I am using the Oracle 10g on a linux server which runs redhat 9. I want to backup the whole database to the disk, but not the flash recovery area. It is /rawdata. I will show how I configure the backup part in EM. Is there anything wrong?
    1. the ARCHIVELOG is on
    2. under Administration, in the All Initialization Parameters, I remove the string value of “log_archive_dest_1”. After that, I go to the SPFile and remove the string value of “log_archive_dest_1”
    3. configure backup settings and policies. The Disk Backup Location field is set to /rawdata. Select Image Copy for Disk Backup type. Test Disk backup is successful.
    4. go to Policy page. Select “Automatically backup the control file and server parameter file (SPFile) with every backup and database structural change.) input /rawdata into the filed: Autobackup Disk Location
    Select “Optimize the whole database backup by skipping unchanged files such as read-only and offline datafiles that have been backed up”
    Select “Retain backups that are necessary for a recovery to any time whin the specified number of days (point-in-time recovery)
    Accept the default of 31days
    5. go to Schedul Backup
    6. select customized from the backup Strategy drop-down menu. Select the Whole Database
    7. in the Options page, select “Full backup” in the Backup Type section. Select “Online Backup” in the Backup Mode section. Select “back up all archived logs on disk” in the Advanced section.
    8. in the Setting page, select “Disk”
    9. in the Schedule page, accept the default job name and description. Select Immediately to execute the job immediately.
    10. just submit the job.
    After several minutes, the job is failed while the Prebackup and Postbackup are succeeded. The log says:
    Recovery Manager: Release 10.1.0.2.0 - Production
    Copyright (c) 1995, 2004, Oracle. All rights reserved.
    RMAN>
    connected to target database: ORCL10G (DBID=770753237)
    using target database controlfile instead of recovery catalog
    RMAN>
    Starting backup at 11-OCT-06
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid=268 devtype=DISK
    channel ORA_DISK_1: starting datafile copy
    input datafile fno=00001 name=+DATADG/orcl10g/system01.dbf
    output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSTEM_FNO-1_68hvin50 tag=BACKUP_ORCL10G_000_101106111844 recid=108 stamp=603544772
    channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:45
    channel ORA_DISK_1: starting datafile copy
    input datafile fno=00003 name=+DATADG/orcl10g/sysaux01.dbf
    output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSAUX_FNO-3_69hvin6d tag=BACKUP_ORCL10G_000_101106111844 recid=109 stamp=603544813
    channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:35
    channel ORA_DISK_1: starting datafile copy
    input datafile fno=00005 name=+DATADG/orcl10g/example01.dbf
    output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-EXAMPLE_FNO-5_6ahvin7g tag=BACKUP_ORCL10G_000_101106111844 recid=110 stamp=603544829
    channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:15
    channel ORA_DISK_1: starting datafile copy
    input datafile fno=00002 name=+DATADG/orcl10g/undotbs01.dbf
    output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-UNDOTBS1_FNO-2_6bhvin7v tag=BACKUP_ORCL10G_000_101106111844 recid=111 stamp=603544835
    channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:08
    channel ORA_DISK_1: starting datafile copy
    input datafile fno=00004 name=+DATADG/orcl10g/users01.dbf
    output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-USERS_FNO-4_6chvin87 tag=BACKUP_ORCL10G_000_101106111844 recid=112 stamp=603544841
    channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:03
    Finished backup at 11-OCT-06
    Starting Control File and SPFILE Autobackup at 11-OCT-06
    piece handle=/rawdata/c-770753237-20061011-05 comment=NONE
    Finished Control File and SPFILE Autobackup at 11-OCT-06
    RMAN>
    Starting backup at 11-OCT-06
    current log archived
    using channel ORA_DISK_1
    archived log /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_cqhvf270 not found or out of sync with catalog
    trying alternate file for archivelog thread 1, sequence 1062
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of backup command at 10/11/2006 11:20:54
    RMAN-06059: expected archived log not found, lost of archived log compromises recoverability
    ORA-19625: error identifying file /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_puhkv41f
    ORA-27037: unable to obtain file status
    Linux Error: 2: No such file or directory
    Additional information: 3
    RMAN>
    Recovery Manager complete.
    It seems the system tries to find a file “arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_cqhvf270” in /rawdata. I just can not understand.
    What should I do? Any advice is highly appreciated!
    Qian

    the string value in the field of 'log_archive_dest_1" under "All Initialization parameters" is "LOCATION=+DATADG/orcl10g/". The same value was in the field under SPFile.
    I reset these values and tried to backup the whole database. The same error appeared. The log says:
    Recovery Manager: Release 10.1.0.2.0 - Production
    Copyright (c) 1995, 2004, Oracle. All rights reserved.
    RMAN>
    connected to target database: ORCL10G (DBID=770753237)
    using target database controlfile instead of recovery catalog
    RMAN>
    Starting backup at 11-OCT-06
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid=245 devtype=DISK
    channel ORA_DISK_1: starting datafile copy
    input datafile fno=00001 name=+DATADG/orcl10g/system01.dbf
    output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSTEM_FNO-1_6ghvj9rd tag=BACKUP_ORCL10G_000_101106043753 recid=114 stamp=603563922
    channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:45
    channel ORA_DISK_1: starting datafile copy
    input datafile fno=00003 name=+DATADG/orcl10g/sysaux01.dbf
    output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSAUX_FNO-3_6hhvj9sq tag=BACKUP_ORCL10G_000_101106043753 recid=115 stamp=603563963
    channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:35
    channel ORA_DISK_1: starting datafile copy
    input datafile fno=00005 name=+DATADG/orcl10g/example01.dbf
    output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-EXAMPLE_FNO-5_6ihvj9tu tag=BACKUP_ORCL10G_000_101106043753 recid=116 stamp=603563977
    channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:15
    channel ORA_DISK_1: starting datafile copy
    input datafile fno=00002 name=+DATADG/orcl10g/undotbs01.dbf
    output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-UNDOTBS1_FNO-2_6jhvj9ud tag=BACKUP_ORCL10G_000_101106043753 recid=117 stamp=603563984
    channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:07
    channel ORA_DISK_1: starting datafile copy
    input datafile fno=00004 name=+DATADG/orcl10g/users01.dbf
    output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-USERS_FNO-4_6khvj9uk tag=BACKUP_ORCL10G_000_101106043753 recid=118 stamp=603563990
    channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:03
    Finished backup at 11-OCT-06
    Starting Control File and SPFILE Autobackup at 11-OCT-06
    piece handle=/rawdata/c-770753237-20061011-07 comment=NONE
    Finished Control File and SPFILE Autobackup at 11-OCT-06
    RMAN>
    Starting backup at 11-OCT-06
    current log archived
    using channel ORA_DISK_1
    archived log /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_cqhvf270 not found or out of sync with catalog
    trying alternate file for archivelog thread 1, sequence 1062
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of backup command at 10/11/2006 16:40:05
    RMAN-06059: expected archived log not found, lost of archived log compromises recoverability
    ORA-19625: error identifying file /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_puhkv41f
    ORA-27037: unable to obtain file status
    Linux Error: 2: No such file or directory
    Additional information: 3
    RMAN>
    Recovery Manager complete.
    Why the system keeps trying to find files under /rawdata? It is the destination, not the source.
    Any help is appreciated!
    Qian
    Message was edited by:
    QianChen

  • I have recently bought a Seagate Goflex satellite mobile wireless hard drive. I have converted some of my AVI movies to mp4 and transferred them to the hard drive, but when I play them through my iPad 2 I can hear the sound but not see the movie. Help???

    I have recently bought a Seagate Goflex satellite mobile wireless hardrive , i have converted some of my AVI movies to MP4 and loaded them onto the hard drive, when I try and play them through my I pad2 I can hear the sound of the movie but not see the film, somebody please help, what am I doing wrong as I have spent a lot of time converting these movies to be able to travel with my iPad and watch them. Thank you

    Unfortunately, the drive is pretty much restricted without hacking it. That is, you can't stream its content via standardized protocols like UPnP, SMB, FTP and the like. This makes you won't be able to access its content from any third-party apps otherwise capable of playing back AVI files from UPnP / SMB / FTP / WebDAV etc. sources.
    While this is certainly not a recommendation (I can in no way be held responsible if anything goes wrong): you may want to consider extending the capabilities of the drive by installing the hack: http://www.hackseagatesatellite.com/wordpress/welcome/
    It'll "open" the drive for third-party, AVI-capable multimedia apps like GoodPlayer, It's Playing etc. to directly play the files over the network.

  • I just purchased Adobe Photoshop Elements 13 but my computer is not recognizing my CDRom and I cannot download the program. I tried copying the files on the program disc to my hard drive but get a message the installer will not work. I have the redemption

    I just purchased Adobe Photoshop Elements 13 but my PC is not recognizing my CDRom and I cannot download the program. I tried copying the files on the program disc to my hard drive but get a message the installer will not work. I have the redemption code and serial numbers. Can I download the program online somewhere? If I download a trial version for instance will it allow me to enter my serial number and use it for the full program?

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • HT5858 In the control center I can change the mute or the rotation but not both.  How do I fix this.  In settings I can not uncheck both the mute and rotation lock.

    In the control center I can change the mute or the rotation but not both.  In the settings area therefore I can't uncheck the mute and rotation settings at the same time.

    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
     Cheers, Tom

  • I receive both My husbands emails and mine through my ipad. We both have gmail accounts.  His emails are coming down on the ipad but not mine.  I haven't received mail since Saturday and as we use the email for business I desperately need it.

    I receive both My husbands emails and mine through my ipad. We both have gmail accounts.  His emails are coming down on the ipad but not mine.  I haven't received mail since Saturday. We use the email for business I desperately need it and I don't have a laptop anymore as it is broken.   In my wisdom I desired to buy an ipad instead,  what a mistake.

    The iPad will support multiple Gmail accounts, but of course you have to set each one up individually.  Did you set up both accounts?  Go into Settings/ Mail, Contacts, Calendars to confirm both accounts exist.  If they do, also familiarize yourself on how to navigate between accounts to make sure you can view your Inbox.  You may also want to check your settings to make sure that you have the default account set up as you expect for Mail, Contacts, Calendar, and Notes (if you're using all those features).  That is important only when initiating something new, you have to have a default account to do such a thing so make sure the default is your account since it is your iPad (assuming that's what you want).
    Alternatively, install the free Gmail app and then use only his (or your) account with that app and use the standard iOS Mail app for the other account.

  • Skype for Business - Manage the .msi but not Users...

    We are considering deploying Skype for Business across our large, international organization.  Two questions:
    Can we disable the File Transfer function in the .msi we push out to everyone?  Our concern is data leakage of confidential information.
    Our central IT shared services group wants to manage the configuration and deployment of the .msi but not be tasked with managing everyone's Skype accounts and billing/funding issues.  Does Skype account creation and funding of those accounts remain with the individual Skype user when Skype for Business is used?  
    Thanks for your help.

    Hi,
    From your description above, did you use Lync 2013 basic version?
    Please check if Windows 7 update to the latest version firstly.
    As Holger Bunkradt said above, please try to install the update manually.
    Best Regards,
    Eason Huang
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Eason Huang
    TechNet Community Support

Maybe you are looking for