TCS Recording playback on EP e.164 numbering

Hi Experts
Our setup is Cisco TCS,VCSc,VCSe,TMS,32Nos of 5320s MCU's and 310Nos of SX20 EP. Our numbring plan is 5digit numbering Plan.
EP Numbeing-------- 71XXX to 73XXX
Meeting ID's ---------801XX to 832XX
Recording Aliases--74101 to 74108
TCS Playback E.164------75XXX
We are configured the TCS server on above numbering plan.Whenever we enable play recording on EndPoint feature in TCS the TCS will generate the playback E.164 number automatically. The number is generated by TCS is 6digit number (Ex..75XXXX).
Is there any way to modify / Reduce the TCS playback E.164 number in TCS..Herewith attached the Screenshot of TCS for your referance

There is no way to edit the playback alias, other than the prefix that you specify. The TCS will auto generate the suffix portion of the alias, and there is no user configuration of how it does this.

Similar Messages

Adobe Connect 9 Meeting Recording Playback & Audio

Hello All,
I have noticed a strange issue with my meeting recording playbacks.
First Adobe Connect 9.0.2
Windows 7 Platform
I have noticed that after the recording is over, and I run playback to confirm we got what we need...the connected telephone feed (pgi/centurylink) does not come through on first press of play.
The video stream (slides, screen share) will run properly, but there is no sound upon first press of play. If I click the scrubber and drag it back to the open, then the audio will start to play.
I am ok with this work around...however my learners/audience will not be. I am looking for "Press Play and Listen" functionality to keep it simple.
A curious note (these are often good clues, so I figured I would share) The MP3 player pod which is running in the lobby prior to the start of the speaker, is PC sound and it plays back in the recording with no issue. It is only when the telephone feed starts (layout change, and speaker introduction) that the issue begins.
Any thoughts?
Thanks!

As I understand it, it is on the road map for Adobe. Though I've not heard anything other than rumors, so more information would be hard to provide.
I don't know of any third party extensions, other than using something like Camtasia or another screen capture tool.

WVC54GCA Record & Playback problems : Time issues - Playback - AVI conversion

I have gotten everything to work sort of.
Time: The camera time seems to be becoming issue and I am not quite sure why. I have synced it with my pc an it seems still lose an hour. It will sometimes go and try and find a Nttp server even though I havent specified one.
Playbacks: The program for retrieving and playing your recordings. The window never opens to the correct size. I always have to expand it. The slide bar at the bottom (besides not being able to read the font) doesnt display correctly. The speed bar either doesn't speed up the video fast enough for me or doesn't work at all. I am interested in fast forwarding through the recording to see if there is anything worth saving. I am trying to record 12hours per day.
AVI Conversion: The status box of the conversion box doesn't seem to work. When I convert my video I get lots of avi files and have yet to see the full 12 hours of video converted. Why are the data files broken up.
So I think this has the potential for being a great product but I need to know if these minor but essential software issues are going to be resolved. Are there people working on them. Are they of concern to anyone. My use for the camera is to watch my house and record any mischief. But if I am vandalized then I need to produce a tape of the event. I still havent seen that I can do it with this product.
Thanks for listening.

Did the firmware update but still having issues with date and connecting. I am using the software from another camera that works better than the software that came with the camera. It uses a newer version of the recorder/playback which fast forwards correctly and saves and plays back correctly. The timing issue is irritatting since the camera will not do its scheduled recordings if the time is not the same as the pc. Also I had the camera lock up and not allow me access yesterday (before flash). I had to unplug it to get it back. Yes it has a static ip and the router was powered all day.
Thanks

Cisco desktop administrator Services Configuration Multiline, Monitoring & Recording Remove VoIP/Recording & Playback Services

I remove default VOIP Monitor Service in "Cisco desktop administrator>Services Configuration > Multiline, Monitoring & Recording >Remove VoIP/Recording & Playback Services". Now I can't choose in "Services Configuration > Multiline, Monitoring & Recording > VoIP Monitoring Device" Default VOIP Monitor Service. How can I return choice my VOIP Monitor Service(IP UCCX)?

Hi Kalitamih,
This can be regenerated by the Cisco Desktop VOIP Monitor Service.
Please stop the service and start it (do not restart). Let me know how it goes and if it resolves the problem.
Regards,
Arundeep

Change the "playback bar" to show slide numbering?

I am using Adobe Captivate 5 and outputting the CBTs as flash files. Is there a way to change the “playback bar” to show slide numbering. For example “Slide 1 of 15?”
I played around with “variables” but this allows you to put a slide number on the slide itself and not on the playback bar. Do you have any recommendations?

You'll need a programmer to change the playbar (Flash) in that case.
An alternative could be to put the playbar in overlay, don't stretch it over the total width of the slide, and add the solution with system variables at the same height as the playbar.
TOC provides also slide numbers, and could act as an alternative for navigation.
Lilybiri

Intermitent ringing sound on video recording playback

I purchased new 5th gen blue nano from Best Buy on Friday and tried several times but now can report intermittent ringing sound on recording playback. I've posted 3 separate video sections that demonstrate the ringing sound. You can hear here http://www.youtube.com/watch?v=ogAAm64ewj8 this along with seeming poor battery life means I will be returning soon if no response from Apple. Come on guys, this is not up to your usual quality that we have come to expect.

I did call Apple who could not solve either so I did return to Best Buy for a replacement, which thankfully doesn't have the beeping noise.

Local recording playback through desktop app

I have noticed that you lose some functionality in recorded meetings that are played back locally through the desktop application. Most notable is that you can not download a file from the file sharing pod when played back locally. A few customers have asked me about this and I am not sure how to answer them. Is this an intentional limitation for security reasons, a bug, or just a feature that didn't make into the shipping version? Are there any other recording playback features that are disabled in a local playback?
Thanks,
John

I just tested as follows:
1. I enabled on my server the option to allow users to download recorded content
2. I created a meeting, added the file share pod, then turned on recording, turned off recording
3. Went to my Adobe Connect Central, recordings for that meeting, edited the options to allow this to be downloaded locally, then made available for offline and made it public
4. Downloaded the content, ran the recording
5. I was able to select a file in the file pod and download that file to my local drive as normal
It appears to be working fine on my server and client.
Heyward

Dialling E.164 numbers?

Hi All,
Does anyone use their smartphone (preferably specifically N95s) to dial E.164 numbers? I've tried via Gizmo but it refuses to recognise them...
Not really tried others yet, thought I'd get opinions first.
Rick
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

I dont understand how you can only use one set of blocking patterns though?
If you have one set of blocking patterns based on E164 then that means you have to translate regular numbers to E164 at the line level.
This means you either lose the ability to assign different dialling permissions, or you have to have a set of translation patterns per dialling permission (Since you have to choose which CSS to push calls out of from the translation pattern, and each dialling permission will need a different CSS)
This is ugly and large for configuration.
I can't see a way to do it nicely that allows you to:
Cater for users that dial in 9.07 format and +4407 format
Apply different dialling permissions for different users
use the "standard local route group" Feature on devices to allow for intelligent gateway choice when using extension mobility between sites.
The only way I Can see to do it is to basically make two dial plans.
I don't see how your example works Richard. I get the theory about globalising and localising again at the gateway, but I don't see how you can provide different dialling permissions on a per user basis with your example?

E.164 numbering plan E.164 numbering plan E.164 numbering plan

Dears,
just i need from my Voice Gateway AS5400 to send telephone numbers by E.164 formate to Billing systm.
so what the configuration i must add to AS5400 ????
thank you.

You can check this document for more information on AS5400 with e.164 numbering plan:
http://www.cisco.com/en/US/docs/routers/access/as5350/software/configuration/guide/54voice.html

LCCS record/playback questions

Hello, everbody!
I have some doubts regarding LCCS session record/playback:
1) LCCS server starts the playback only when the zip file is completely dowloaded from WebDAV? It will takes forever for large sessions, wont it?
2) If yes, what can I do to improve this upload speed? Is there an, or a set of, datacenter storage service with privileged access to LCCS infrastructure that we can hire to decrease this transfer time?
3) I noted that the LCCS does not download the zip file again per each concurrent playback, it appears to have a kind of internal cache. How does it work? Is there any way to improve it's eficiency?
4) Can I choose which shared model to be recorded or not? It's because there are some PODs that does not makes sense for us in ondemand sessions.
Thanks, guys!
Renato A. Ferreira

Thanks, Nigel.
Is there any known way to force a specifc file name to be used in playback process? It's because I saw the room name within the stored file name, and it made me think that I will need to keep or recreate a room with same name for playback. I agree that multiples rooms are the best way to handle concurrent sessions, but, if it's also needed for playbacks, the number of rooms in my account may grow fastly and make some server-to-server operatios gradually slower.
Or maybe I could also automatically rename the file for something like *********_x002F_PLAYBACKROOM_x002F_sessionID.zip and leave only this room created, as the session ID already is a configurable parameter. Do you see any problem in this idea?
Thanks,
Renato A. Ferreira

TCS Recordings Playback issue

Hi Everyone,
We have Cisco Telepresence Content Server (TCS v.5.3 Build 3316) and encountering issue regarding playback of the recorded videos via endpoint.
The TCS is registered as SIP and H323 on the VCS(v.X8.2.2)
When calling SIP or H323 recording ID, call is connected, everithing is fine, but after 15 minutes or more there are video freezing issues or no video at all(black screen). Audio stays ok all the time.
When calling SIP or H323 recording ID directly from MCU everything is fine, no problems whatsoever. There is nothing strange on the TCS logs, so I presume it could be VCS issue...
Could anyone help?
Best regards,
Petar

Hi everyone,
Update after a lot of testing:
H323-H323 calls are definitely NOT affected.
SIP-SIP calls unable to make, since there are only H323 playback prefixes set on the TCS. No option for SIP.
Only SIP-H323(traversal) calls are afected.
SIP-H323 (Transport-TLS, Encryption-YES) - 15min black screen
SIP-H323(Transport-UDP, Encryption-NO) - 15min black screen
SIP-H323(Transport-TCP, Encryption-NO) - 30min(+3-4) black screen
On the VCS Call Media statistics there are lot of errors related to H224 protocol on each SIP-H323 call. I don't know if this is related...
So, as Wayne said it might be related to Interworking on the VCS.
Another thing, H323-H323 calls are transformed, SIP-H323 are NOT. At least that's what I saw on the VCS call log.
Any thoughts?
Petar

Recording/Playback on DVD Player

I've already programmed my Verizon remote control to my DVD/VCR player. Which remote control do I use to record and playback. I'm recording from DVD to VCR (VHS Tape). Also, do I have to change TV input for DVD player? TV is currently Video 1. I had DIRECTV and had to set to Video 3 for DVD Player. Any assistance is appreciated. Thanks in advance.
Solved!
Go to Solution.

I called Verizon FiOS Tech Support for help with my dilemma. You have to change the video channel from Video 1 (TV) to Video 3 (Audio/Video) first. First, press the DVD button at the top of the Verizon Remote Control; second, press the TV button also at top; third, press the A/V input button at the bottom of remote control until Video Channel is on Video 3. Use your DVD/VCR Remote Control to control record, play, etc. I hope this helps someone who may have the same problem I had. Good luck!

Nokia Lumia 1520 Video recording/playback issues.

I seem to have issues with video recording. Video seems to have some pause "still" effects when taking video and playback in phone shows those stops very clearly as it freezes for while and jumps many seconds forward.
When I play same file in PC with video player the video plays better but still I can manage to see some small Glitch in video like my phone did stop recoding for some frames. I have been using SD card and phone memory and both have same problem.

No solution so far and it is my wife phone so haven't have much reason to play with it find solution. She only takes photos anyway.
This current phone has already broke down 2 sim cards also or wireless charging did brake those not sure after stop using wireless charging 3rd sim card have been fine.
someday when have I feeling to take this phone to warranty service I will try wireless charging again.

Why can't I record duration as hh:mm in numbers 3.0.1?

I'm trying to record the durations of different events in a spreadseet.
I format the cells to Duration -> Custom Units -> hr and min -> Style: 0:00
Yet when I type "0:35" to record 35 minutes, I get "0:01" and in the tab on the bottom it says "Actual: 0:00.583"
What is going on here?
Why can't i just enter the duration i want in the style I specified? Why is it trying to convert this to a decimanl when I told it specifically not to?
Please help.

Hi ilb,
The example below was constructed in Numbers '09, and shows the format for cells in column B, set in the Inspector. All values in column B were entered directly using nn:nn, with one or more digits before the colon and two digits after the colon in each case.
Cells in columns C and D contain the formula =B. Column C is set to Automatic, and adopts the units of the values in column B, but the default 0h 00m dispay for those units. Column D format has been set to include weeks, days, hours and minutes, and to display these in the same manner as column B.
Setting the formats in Numbers 3 is done slightly differently, and that version may not support setting the formats you want. Wait for details from one of the N3 users on those differences.
Regards,
Barry

Sound recorder playback volume low ?

I have a dv6000 notebook , for the first time ever I tried recording sound using windows movie maker to add ''narration'' but the playback volume is very low .
I tried the windows '' sound recorder '' and got the same result .
I've been through all the standard adjustments and settings and have gone into ' control panel ' and adjusted 'levels' and everything else with no success .
When I record a video using the sound on my camera the volume is fine - it's just the mic sound that is low whether I use an external mic or the built in ones .

I have the same issue and I see no responses to your inquiry.. This Windows help menu leaves much to be desired. Im sure I will one day figure out how to work this version that I had no clue I was buying bc it should come with a warning label.. its completely different and agonizing and great help menu lovely.. Im sorry to be so negative wish I could help.. Ill sit here all night till I figure it out and then post an option on how to adjust the recording volume.. Unreal..

TCS Recording playback on EP e.164 numbering

Similar Messages

Maybe you are looking for