TCURM in target client empty after Client Copy

Hi Experts,
Has anyone encountered situation whereby TCURM does not contain a record for the target client after Client Copy process is completed? Is this a feature or bug?
Regards

Hi , I user the exclude tables option to exclude some tables.
but I have another problem: the client copy still failed. I get these informations:
table/object   component                         error
ANLU           FI-AA-AA                   Field missing locally
C905            SD-MD-CM                Different Field Names
IMPTT          PM-EQM-SF-MPC      Field missing locally
how can i finish my client copy ?   can you give me the solution
thanks very much

Similar Messages

BI-RFC problems after client copy

Hi all
Client copy was done and after that when I tried to load data in BW, it ran for long time and finally showed cancelled in SM37. When I checked the source system in RSA1, it gave two messages.
1.Incorrect IDoc type ZSAC008 in the ALE definition of the source system RSAR373
2.Result of the destination check: Password logon no longer possible - too many failed attempts RSAR375.
In long text of message 1 suggestion was to enter IDoc type ZSAB003. In SM30 for Message Type RSSEND Basic Type ZSAB003 Release field is empty. Is this error because of this? After client copy is there a way to restore the settings back to how it was set initially in the development server? Basis told ALEREMOTE & BIWREMOTE are not blocked. What is missing here? Thanks a lot in advance.
Subin

There are a few things need to be performed on basis side after copy .
1. Restore of Logical system.--> check with Baisis team wheather they have performed this action or not after copy.
2. Check your source system connection, in rs1-- source sytem --check
3. Change the aleremote or Bwremote passwords.
4. Try to logon to your sourcesystem ( from SM59 Tcode) Remote logon.
Hope this helps.
Regards,
Reddy
Edited by: Reddybl on Apr 1, 2010 11:56 AM

Error After client copy

Hi all,
I did a client copy in ECC IDES with client 800 as source client.As per the logs , copy is successful.The profile usedf is SAP_ALL.After the copy we logged into the new client which was
created and it looked good. Checked the Logs in SCC3 and it said that client copy was finished sucessfully.However now when we go and execute transactions MM01 and VA01, it is giving a error saying
Batch definition level not found.System inconsistency!
Not sure what went wrong, Any suggestions would be Helpful.
Regards,
Chaitanya.

hi...
send the full details of ur client copy....
what is ur target client where u did this client copy .. i mean in prod dev

EWZ5 unlock users after client copy does not work

Hi All
I have following problem, i made client copy and i locked user in EWZ5 on both systems (source and target). Than I made client copy with profile SAP_CUSV (customizing with variants). The problem is that after the copy i am unable to unlock users on the targat client in EWZ5. I see users locked in the transaction but when i click unlock than no one is unlocked (result like there are no locked users) and users still remains locked (i tried to log on). On source system unlocking was working ok.
Any suggestion are highly appreciated.
JM

Hi Josef,
Did you checked syslogs? You can also execute the sql statement, below, on sqlplus;
update <owner>.usr02 set uflag='0' where bname='EWZ5';
commit work;
Best regards,
Orkun

SAP* not authorized after Client copy

Dear All,
Here's the scenario:
1. Created a new logical system for a new Quality client 230.
2. Created the new client 220
3. scheduled a test remote client copy from the new client, source Production. (Successful)
4. Scheduled the actual client copy to run last night.
5. Today morning, I'm logging into the new client with SAP*, it prompted me to change password.
6. I want to look for the client copy logs (SCC3), but getting "not authorized"
7. Checked all other transactions, all giving "not authorized" error
Any help would be appreciated. Thanks in advance.

Dear Reza,
Better to go for Client Export Import process . This is what SAP reccomends for coping clients between
different systems ( Like from Production to Quality ) as the remote client copy has many
disadvantages..
For this 1 ) you should get the downtime of production system and do the client export process .
SCC8 . See the logs at scc3 .
2) Copy the datafile and cofile to the Source system
3) Import it usting stms_import .
Monitor the logs as the logs will be grown massive and make sure enough space is there.
4) After client copy , go for post processing ( scc7 ) .
Hope you are clear and feel free to get back if any doubts.
Regards,
Nibu

Country key INR is not defined after client copy

Dear All,
I'm doing a client copy in my solution manager system.
Target Client         100
Source Client        000
Copy Type           Local Copy
Profile                 SAP_CUST
Status                 Successfully Completed
User                    SAP*
The log from SCC3 shows that the copy is successful. However, when I'm logged in to client 100 (new client), I have problem assigning the profiles to the user.
In SU01, when i was assigned the profile (SAP_ALL) to the user, the message says that "Profile SAP_ALL does not exist or is not active".
so I have use SU21 and reactivate SAP_ALL profile, then SAP_ALL assinged sucessfully
But when i try to assine SAP_NEW profile to user, message says that "Profile SAP_NEW does not exist or is not active".
However, when i try creating a new user in SU01, a message box prompted out an warning "Inconsistency with address" and "No default co. address has been maint. in the system. Create an address". When i try to create the address, the entry for "country" does not have any choices and values. If I fill in my entry, the system displayed "country key XXX is not defined"
Did do something wrong here? Please suggest how to correct this issue
Regards,
Ajay

Dear Mr karthikeyan,.
Thanks for your helpful answer.
As per note 1711620 - use of SAP_NEW is not required for every version change project, no automatic generation takes place
So its mean that SAP_NEW profile is not required now?
and as per note 1164216, i have mentioned entries of country code in table T005 and its work.
Time zone INDIA does not exist- for that i use the note 198411 and its also work.
But "Company address could not be created" could you please help[ in this
Regards,
Ajay

Error message: no valid initialization after client copy

Hi,
We recently did a client copy of our quality BW and R/3 systems from preproduction. In the 'new' clients we have problems with the delta process for 2LIS_13_VDITM. We get an error message that there was no valid initialization in the system, where in fact a valid initialization has taken place (everything from preprodcution was copied).
The source systems setting where corrected using BDLS, but the entries in R/3 tables roosprmsf / roosprmsc were still pointing to the old system. This has now been corrected.
One problem remains. There is no entry for 2LIS_13_VDITM in table RSSDLINIT. I suspect that this causes the error message. Can anybody confirm this ? Is there a standard way to add the correct entry (with the package number of the init package) in table RSSDLINIT or realign table RSSDLINIT with table roosprmsf in R/3 ?
Thanks in advance !

Hi,
After system copy. You will ahve delet your whole data and reload every thing.
In case you are getting dump when you double click infopacakge then delete your data source entry in RSA7 in source system and then go for fresh init load and then continue with delta load. Before goign for fresh init load you will have to first delet the init load entry.
This must help
Regards,
Rohini
Message was edited by: Rohini Garg

Unable to find product categories after client copy

Hi all,
We have copied clients from an existing ones for both SRM and ECC. After client copy we have followed standard procedure after client copy i.e.
Run transcation BDLS
created new RFC connections
changed attributes using the Attributes replace report
created new distributon model
maintained CRM parameters
maintained new site attributes in SMOEAC transaction
maintained entries in table TWPURLSVR
however , when i try to create a shopping cart, I cannot see any product category. The extended attributes for product category point to new ECC client becuse we have run the attributes replace report.
however in the product category table , COMM_CATEGORY , the product categories listed are all for the old ECC client
When i tried to load the Object DNL_CUST_PROD1 using transaction R3AS in SRM and tried to pull from new ECC client , it is in runing status for a long time and new categories with new ECC backend reference are not being replicated in the SRM.
Can you tell me why this could be happening ? How can i get the product categories from new ECC backend into my client?
Regards,
Mangesh

problem solved
i was using wrong parameters in BDLS

Change Myself system in RSA1 trx after client copy

Hi,
I have installed SCM 2007 system.
As post-processing step i have configured myself system in RSA1 trx in the 001 client.
Now, i want to perform client copy and use that new client 100 as Prod client. What are the steps required to change myself system to point to the new client?
Please help.
Regards,
Chintan

HI,
As logical systems are used to define you can use BDLS to convert them after client copy.
Go through :Note 325470,325525.
Thanks.

AFAB: Runtime Error after client copy.

Hi all,
I'm having a problem with the transaction code AFAB (post client copy). After client copy from PRD to DEV, I'm encountering this runtime error "SAPSQL_ARRAY_INSERT_DUPREC - The ABAP/4 Open SQL array insert results in duplicate database records." whenever I tried to perform AFAB. Test run was executed successfully but I cannot complete the actual background processing.
I have try with other asset (in the same client) and encounter the same problem. Likewise, I have successfully completed the depre. if I try the same and other asset (in a different client on the same server).
I've check the number range in FBN1 and have verified that the range is correct.
Any advice as to how I can solve this problem?
Thank you.
Regards.
p/s: if there is duplication, how do I find where the duplication is located and how do I remove this duplication?
p/s 2: the standard SQL that is having this problem is "INSERT COBK FROM TABLE COBK_INS."
Edited by: Sek Yao Ooi on Aug 5, 2010 5:21 AM

Solution obtain from snote-83731 ; thanks to SAP-Marketplace's support.
Issue solved.

After Client copy - No Authroization Issue

Dear All,
Good Day,
We copied Production data to Quality system through Transport management System. We checked those data copied successfully. After client copy, login in Quality also done successfully
But unable to run any transaction. no authroization error occur for all the transaction for all the user id.
"You are not authorized to use transaction XXXX"
Kindly advice me to resolved this issue.
Best Regards,
KSK

Was security transported down? Can you log into the system as SAP*? If so, check to make sure that all the roles and user masters where copied. You can also run st01 to do an authorization check.

Background jobs pointing to old client after client copy

Hello
We have recently completed system refresh from PROD system to TEST system.
We have created new client in new TEST system. Background jobs are copied properly from old client to new client.
But all these jobs are pointing to old client only. We have deleted old client.
Hence all these jobs get cancelled.
How shall I change the client of all the jobs from old to new one.
-Nandu More

Please check the thread:
Error in Background Jobs After Client Copy
Check some of the TBT* tables.

SAP_ALL & SAP_NEW profiles not available in new client after client copy

I am setting up a BI Client and have been following some documentation to do this downloaded from SDN. In the process, i created my client 'client 200' assigned to a logical system then doing client copy from 'client 000' using transaction SCCL. There is a step when i now have to create a user in the new client (client 200 ) where i am supposed to assign the user to profiles SAP_ALL and SAP_NEW. Unfortunately these are not available in my newly set client but in 'client 000' they are available.
Did i make some error in the client copy process or i still need to do something to have the profiles in 'client 200'. Please assist.

There is no issue in rerunning the Client Copy.
But please check what mistake you made in the first one.
Here are the steps.
Create an entry in SCC4.
RZ10 modify parameter login/no_automatic_user_sapstar=0
Check that you have enouf background and dialog processes.
Restart the sap system
then login with SAP* in the Client you made.
Run Sccl and give the Profile SAP_All
Select the source Client as 000
and Source Client user Master as 001
Check tthat you dont select the check box of TEST MODE.
and schedule in backgreond.
Thanks Rishi Abrol

Jobs pointing to old client after client copy

Hello
We have recently completed system refresh from PROD system to TEST system.
We have created new client in the new TEST system. Background jobs are copied properly from old client to new client.
We have deleted old client.
But all these jobs are pointing to old client only.
Hence all these jobs get cancelled.
How shall I change the client of all the jobs from old to new one.
-Nandu More

Hi,
This solution is not a good way, but either way it worked in a similar scenario for us.
Check the Table TBTCO for these fields
AUTHCKMAN Authorization check
STATUS Job status
Where the STATUS flag is "S", i.e SCHEDULED.
The AUTHCKMAN field will still contain reference to your OLD client no, for eg. if 300 is the deleted client and you are checking this table in the new client 200, the AUTHCKMAN field will contain 300. Changing the client reference in this field to your new client will make the scheduled jobs run ok.

Which client is ABAP client after copy client?

I had copied a new client 800 from client 000, and client 800 is used for bi production client.
When i follow the guide "Template Installer", need to fill the filed "ABAP Client", so which client should i fill in?
The installation usage type is ABAPJava, BIEP
Message was edited by:
Jianyong Wen

Jianyong,
ABAP client should be 800.
Mimosa

TCURM in target client empty after Client Copy

Similar Messages

Maybe you are looking for