TCURX not updating in BW with RSIMPCUST

BW Dudes and Dudettes,
Our ECC6 com padres have deleted an entry from TCURX.
They've done this in the ECC6 environment (Dev currently, but QA and Prod to follow).
I now want to replicate the change to BW. I've used all the options on RSIMPCUST manually on the appropriate source system in RSA1 but the changes do not reflect in TCURX in our BW system.
Any ideas why TCURX is not changing, even though I get success messages in the log for RSIMPCUST?
Regards,
AJ

Okay, so I should have checked SAP Notes first ...!
1549820 - TCURX deletion does not take place during rebuild, seems they changed the logic to prevent deletions via RSIMPCUST and have realised the error of their ways - this note allows deletions again.
Regards,
AJ

Similar Messages

Schedule line date is not updating in line with P.O confirmation.

hi,
when sales order created for individual requirements it automatically creates P.R and this P.R is converted to P.O.
whenever this P.O is updated with confirmation category like acknowledgement or inbound delivery it should update Sales order schedule line for the delivery date. but this is not happening, what is the configuration required for this.
Kindly reply.
Regards,
Venkatesh

hi,
when stock is not available then the customer order is booked as special requirement and P.R created against that order. Then the P.R is converted in to P.O and P.O is updated by O.A or Inbound delivery but the delivery dates from O.A or inbound does not update the sales order schedule line.
Regards,
Venkatesh

Multiclip editing does not update Canvas window with active angle

Hi,
I am trying to do some multiclip editing but for some reason when cutting between angles the canvas viewer does not update with the video. Once I stop playback the cuts are all created properly and the video changes when playing back again. However, when editing the video does not change to the active angle. The audio changes but the video does not.
I have the multiclip playback setting in RT enabled and the canvas and viewer windows synced and matching each other when playing back, and video + audio is set in the sync menu.
I'm now stuck! and would greatly appreciate some help.
Thanks
Phil

Welcome to the family.
I don't mean to brush you off because I understand your frustration. But what we know about mutliclip is that it really does work, if you follow the rules completely. We also know that most of the "multiclip doesn't work" posts are resolved by encouraging the user to be objective and to simply recheck the setup steps in the manual, one at a time. (Editorially speaking: There are too many of them, there are too many stupid gotchas in the multiclip setup. True. Hope springs eternal that FCP6 may fix many of these things. It should be a one-click solution.)
You can search for multiclip here and, after filtering out the nonsense from elitists like me, you should be able to detect something in your configuration that might be keeping you from getting the performance you are expecting.
bogiesan

IPod will not update in iTunes with Windows Vista

Every time I connect my ipod to my computer, my computer locks up and it does not update. The only way I can even connect my ipod is to use manual update.

iTunes does not yet support Windows Vista. There are numerous problems running iTunes on it. The latest release of iTuens 7.1 fixed some of them but not all.

Ipod 4G will not update to ios5 with PC

I ahve a PC and even though I have updated itunes to the newest version, my ipod 4G will not update to ios5. System continously states timed out. Not sure what to do.

- Try disabling the computer's security software during the download and update, or
- Doing a direct download and install using the instructions here:
iPod, iPhone and iPad Firmware Download

Stock not updated after GR with 103 & 105 movement types

Hi All
I have raised one GR(MIGO) with ref to PO and movement type as 103(GR for PO with GR blocked stock).
The same was released in MIGO using movement type '105'and stock type selected 'Unrestricted use'.
After first step, In MMBE stock updated under 'GR Blocked Stock'.
But after second step no stock was updated in 'Unrestricted use'.
the actual scenario is:
The receipts from vendor for a PO need to be blocked and then later should go to unresticted use.
Can any body help me how to address this and Tcodes need to be used.
Regards
Nageswara...

Hi GSC
Thanks for your reply and it is some what understandable.I have few more questions.
1.Is it possible to create PO with out Account and Costcenter not assigned. If so what is the impact.
2.My current settings were not allowing to create the PO with GL account and Costcenter.
M just confused with the "PO with account assignment" concept. Could you spare some time for this and help me to understand?
Thanks in advance
Nageswara...

Image does not update in loop with control

Hi all,
I am trying to make a data playback vi. I have some data recorded, and images recorded from another vi saved onto my computer.
I want to sync the data with the video, so we can tell what was happening visually when there is something interesting happening on the waveform etc
I successfully made a real-time playback of the data and video. The speed of the playback is selectable and works well. The image output is inside a while loop.
However, I would also like to make a different case where the time is selectable via a slider.
The setup for the video playback is almost identical. The only difference is that instead of the loop iteration output hooked up to the image array indexing, the output of the
front panel slider is hooked up.
However, this small changes is a big problem! The data in the wires updates as I slide the slider fine, but the image in the front panel does not.
If I scroll around the front panel the image WILL update, or if I zoom in or out etc. Any action except moving the slider updates the image.
This is somewhat confusing because the image updates with no front panel activity at all when using the iteration # output... why should the refresh care about getting
the indexing from one source or another?
I tried playing around with my display settings, like resolution, acceleration, color depth. I've also added wait times. I also tried to put in a flat case structure with the image
update first, then checking the slider value and shift registering that around the while loop.
It is probably something weird with Windows, but is there some way to 'trick' LabVIEW into a redraw?

Ah, I'm dumb.
So when you have a selectable case structure (lets say two cases) and an image out in each it creates two image out windows in the front panel!
The other image out was like 3 screens away for whatever reason, and THAT one was updating just fine.
Now to put the case structure inside the while loop instead of the other way around so I can just have one image out...

APEX_ITEM.date_popup does not update proper row with column sorting on

I have the following example sql report query on a page:
select rownum rowno, object_name
, object_type
,APEX_ITEM.date_popup(43, null, created, 'DD-MON-RR',9) date_created
from user_objects
This works fine when I tried to update the date if no sorting is involved. If I allow sorting in APEX by clicking the column headings, the row numbers no longer match up with the the displayed rows. So in order words, if I had the following
Row MyCol Date
1 Z
2 B
3 K
If I enabled sorting and click the MyCol column heading, then the following would result:
Row MyCol Date
2 B
3 K
1 Z
If I then enter a date for the first displayed row, MyCol=B, then it will update the MyCol=K row because it goes by rownum and it thnks it is rownum=2 where MyCol=B.
This use to work by putting in a unique id column instead of null for the 2nd parameter to the API. The latest doc says that parameter is depracated and this no longer works. It seems to always go by rownum, and therefore won't work with sorting.
Any workaround or suggestions?
We need to have a query similar to above, with sorting enabled on a number of columns and then have a custom PL/SQL process called when the submit button is pressed. It would reference the date column as APEX_APPLICATION.G_F43(I) in this example.
It used to work. Has this functionality been removed?

rwessa,
Right now, there is no reasonable workaround for this immediate issue of using APEX_ITEM.DATE_POPUP in your query and sorting via PPR. The problem is that the generated JavaScript as part of APEX_ITEM.DATE_POPUP is generated at query execution time and then sorted by the reporting engine afterwards (via AJAX/Partial Page Refresh).
About the only workarounds I can suggest are to disable column-heading sorting for the SQL-based report. If you want sorting, implement sorting via a select list and then use a region type of PL/SQL function returning query, where you append the ORDER BY clause to the SELECT statement. You may also wish to investigate using regular reports (and changing the Display As of the column) or using tabular forms, which would not exhibit this behavior.
I hope this helps.
Joel

Iphone not updating or syncing with PC when on wifi - help?!

Hi there,
I have connected my iphone to my laptop (not a mac). It connects however with the upgrade to the new itunes I can't find out how I can change my playlists on the pc and then update to the phone accordingly. Any tips greatly appreciated! Thank you.

nevermind i found it

Lightroom not updating main preview with develop changes. Steps taken, please help...

I have CC photographers package with the latest Photoshop and Lightroom (5.7) installed. Starting yesterday when I make changes to the develop sliders the image doesn't change. The filmstrip preview does but the main preview does not. If I switch to a different image and back I can see the changes but I can't edit that way. I purged caches, increased their size, made a new catalog, uninstalled (and left over files) and ran CC cleaner on the registry then rebooted and re installed. I did not uninstall CC or Photoshop. How can I make the slider changes show up in real time again? It isn't that the changes are lagging. I can change a slider and it WILL NOT change the image no matter how long I wait, but if I switch to another photo and back the changes show up immediately. Searching Google yielded only results about smart previews and was not helpful to me. I am not using smart previews and the actual RAW files are on the same machine Thanks everyone!

I don’t know for sure, but if it just started, not when you installed LR 5.7, then something changed on your system. A display-update issue would perhaps be related to video drivers, so did your system’s video drivers get updated, yesterday, or did you install some game that changed something?
About the only thing I can suggest in this regard is to try rolling back your video drivers or installing the latest video drivers from the video-card manufacturer’s site, or if they have a list of older drivers, archived, then try installing the preview version or two back.

Can NOT update video automatically with selected playlists!

I just bought my iPod today and when I try to put some video on it, the movie does not appear anywhere.
when I click on the Video button, the "automatically with selected playlist" option is hidden and I cant click on it, and no video title can be observed.
Do you have to put video in to certain folder to add them?
And how come the Automatlcally with selected playlist is hidden?

I had the same issue, however I used this program;
http://www.videora.com/en-us/Converter/iPod/
I'm pasting this from the Videora site, the settings worked for me when others didn't, enjoy:
Configuring videora converter
0) Start Videora iPod converter.
1) Click setup in the left nav.
1.5) Click the profiles tab.
2) Click new profile.
3) Now, configure that profile:
profile name: ipod
in the video settings section...
mode: MPEG-4 > CBR
resolution: 320x240
passes: one
bitrate: 768 kbps (384 kbps also works)
framerate: 29.97 fps
in the audio settings section...
bitrate: 128 kbps
sample rate: Input
channels: stereo
4) Click apply to save the profile.
Now, you're ready to transcode.
1) Click convert on the left nav.
2) Click the transcode new video button.
3) Pick your source video. Mine was an AVI from a torrent.
4) Under quality profile, choose "ipod", the profile you created using the steps above.
5) Click start.
Now you're ready to get the video on your ipod
1) In iTunes, under the File menu, select add file to library. Find the transcoded one. By default, the transcoded videos pop out under the Videora install directory.
2) Drag and drop to your ipod.
Questions/observations:
1) I haven't been able to get H264 anything to work. Is it broken? How much smaller than MPEG4 is it?
2) 768 kbps video was about 400 megs/hour; 384 kbps video was about 231 megs/hour. I could readily see a difference in video quality.

Data not updating in Metadata with Select options that come from a view

Hi All,
I have a similar problem.
I have a view called "contractnumberview" created in UCM that gets a "contractnumber" from database table called "Contracts"
The view is used as options list for a metadata called "xContractNumber".
The data is inserted in the "Contracts" table from an ADF Application.
Problem:
After a new contract number is inserted into the Contracts table from the adf application, the new contract number does not show up in the check-in form drop down of the xContractNumber metadata field.
If i open the "contractnumberview" from configuration manager, the new contractnumber is listed there.
Is there anything special required to be done so that the contract number is published in the check-in forms also.
Thanks
Amit

Hi Everybody,
I Discovered how to ADD or Delete intens in java class, but now would like to update Title value.
The code is:
            List fields = new ArrayList(2);
            fields.add(new DataResultSet.Field("dDocName"));
            fields.add(new DataResultSet.Field("dDocTitle"));
            DataResultSet resultSetNovo = new DataResultSetImpl();
            resultSetNovo.setFields(fields);
            List leilaoRow = new ArrayList(2);
            leilaoRow.add("SOME_EXISTENT_ID");
            leilaoRow.add("SOME_EXISTENT_DESCRIPTION");
            resultSetNovo.addRow(leilaoRow);
            IdcClient idcClient1 = manager.createClient ("idc://host:port");
            IdcContext userContext1 = new IdcContext ("user","password");
            HdaBinderSerializer serializer1 = new HdaBinderSerializer ("UTF-8", idcClient1.getDataFactory ());
            DataBinder dataBinder1 = idcClient1.createBinder();
            dataBinder1.putLocal("IdcService", "EDIT_SCHEMA_VIEW_VALUES");
            dataBinder1.putLocal("schViewName", "C_LISTA_LEILOES");
            //add/update/delete
            dataBinder1.putLocal("editViewValueAction", "update");
            dataBinder1.addResultSet("LeiloesCadastrados", resultSetNovo);
            serializer1.serializeBinder (System.out, dataBinder1);
            ServiceResponse response1 = idcClient1.sendRequest(userContext1,dataBinder1);
            DataBinder responseData1 = response1.getResponseAsBinder();
The error is:
Unable to edit view values for view 'C_LISTA_LEILOES'. The key CCEE_54321 could not be added due to a primary key constraint violation in the LeiloesCadastrados table.
And the consoel messages during the process is:
@Properties LocalData
IdcService=EDIT_SCHEMA_VIEW_VALUES
UserTimeZone=UTC
UserDateFormat=iso8601
schViewName=C_LISTA_LEILOES
editViewValueAction=update
@end
@ResultSet LeiloesCadastrados
2
dDocName
dDocTitle
CCEE_54321
SOME_DIFERENT_TEST
@end
Im my table the column dDocName is the primary key and I´m trying to change only the dDocTitle column
Any help will be appreciated
Thanks for everybody.
LCruz

Battery Update 1.4 does not update my battery with firmware version: 102a

Hello,
I was happy to see this update come out recently as my battery does lose power when the computer is powered down but I wanted to fully research it first because there's no going back with these firmware updates.
From Apple's page about this 1.4 update:
Batteries with this information in the Battery Information section [of Apple System Profiler] need this update:
A device name "ASMB016" or "ASMB013" in the serial number
A Pack Lot Code is 0002
A battery firmware version of 0110
Everything on my system matches except my battery firmware is version: 102a
Figuring that 102a was a lower firmware version than 0110 I went ahead and installed the update but I don't think my battery has been updated. I got no notice that it was being updated as others, on other forums, have described seeing and nothing in Apple System Profiler has changed.
A quick Google search showed that plenty of other people are asking on the web about this version 102a firmware as well.
So, any idea what the deal is with batteries that have the firmware version 102a? I got this current battery under the recall program as the original one that came with my MacBook was one of the bad ones.
This whole MacBook battery business has been a nightmare. It's wasted hours of my time, and is a real black eye on what is otherwise a good computer experience.
Thanks in advance for any input.

Macophile wrote:
Hello,
I was happy to see this update come out recently as my battery does lose power when the computer is powered down but I wanted to fully research it first because there's no going back with these firmware updates.
From Apple's page about this 1.4 update:
Batteries with this information in the Battery Information section [of Apple System Profiler] need this update:
A device name "ASMB016" or "ASMB013" in the serial number
A Pack Lot Code is 0002
A battery firmware version of 0110
Everything on my system matches except my battery firmware is version: 102a
Figuring that 102a was a lower firmware version than 0110 I went ahead and installed the update but I don't think my battery has been updated. I got no notice that it was being updated as others, on other forums, have described seeing and nothing in Apple System Profiler has changed.
I started thinking about it, and 102a is actually a larger number than 0110.
In any case, the updater was only meant for specific battery revisions.

Please do not update more often with Adobe Reader

It is very useful for adobe reader, but I often get notify to update program. It is troubling for me.
Hope you can have a good solution.

Thank you!
I subscribed to a calendar from project24.info which I added when I mustn't have been logged in to their website at that time. I deleted the calendar, logged in and then subscribed again and after syncing the annoying appoinment on the iPhone is gone. Seems like it wasn't shown in iCal on the Mac because I always select to not include reminders, etc. when subscribing...
Thanks again!
Björn

Playlist not updated during sync with added songs

I have a manual playlist set up in iTunes where I store my music. I then have iTunes set to sync only this playlist to my iPhone 5. However, when I've added a newly added song into this playlist, and performed a sync, the song does not move into the playlist on the phone. I have to uncheck "Sync music" sync the phone, then recheck "sync music" for it to appear. Only started when I upgraded to iOS7

Yeah, iOS 7 may be beautiful but it still has bad quality issues. Apple needs to fix the bugs and hold off an any new feature work for the next version of the OS!!!

TCURX not updating in BW with RSIMPCUST

Similar Messages

Maybe you are looking for