TD340 Red Hat Linux 6.4 during start up give Kernel Panic

I am a newbie and please forgive my newness
I recently bought a TD340 with 32GB Ram, OB SAS RAID 300.
While using the ThinkServer EasyStart up to configure the installation of Red Hat Linux 6.4. I am able to finish the installation successfull, however, after the installation is completed and and Linux 6.4 boots up, in the middle of the start up a I get the following message:
Kernel Panic - not syncing - attempted to kill
Pid: 1 comm: init not tainted 2.6.39-400.17.1
Call Trace:
and it nevers boots up sucessfully.
Any help would be appreciated.

It clearly mentions its bootstrap issue in Java stack. The bootstrap log files can be found in /usr/sap/<SID>/JC<XX>/work/ folder.
dev_bootstrap* ; log_bootstrap* ; jvm_bootstrap*.
In one of these files, it will be mentioned, synchronization exception...Database initialization failed.
90% of the issue is caused dude to Database not getting initilized or its not connected or userauthorizations missing or driver class secured in the Secure store is incorrect.
Troubleshooting J2EE Engine 6.40/7.0 Bootstrap Issues
SAP Note Number: 997510
Check this note, you will get all the answer!!
And award points if it helped.
-Subbu

Similar Messages

StarOffice8 On Red Hat Linux x_86_64 Won't Start

I've just purchased the upgrade to StarOffice8 and installed it on my Red Hat Linux (AMD-64). The installation finished without any errors at all. I checked and all files were installed. However, when I start any of the apps, nothing displays. I can see the processes with 'ps' command but nothing on screen. I've changed the monitor resolution as described in the README, nothing works. All other X-WIndows stuff works fine. I have a pretty standard video card, the Nvidia FX 5200 and Red Hat came with drivers for that adapter. Can anyone help with this?

Hi Mink,
Confirm you have 1.5 GB free in /tmp. If not you can point the installer to another location -- set the variables TEMP, TMP, TEMPDIR to that new directory if you need to.
Regards,
John A. Booth
http://www.metavero.com

How to start SQLPLUS in oracle 10g which install on Red Hat Linux AS 4

I install oracle 10g on Red hat linux enterprize AS 4. but i can not start SQLPLUS. I could not login to grid control. When installation, some agents installations are fail. what can i do? please help me out.

I install oracle 10g on RHEL 4. But error occure in cofiguration assistant.
following assistance not configured (which are recommended):
Oracle Net Configuration Assistant - fail
HTTP Server Configuration Assitant - skipped
Java Security Configuration Assistant - skipped
OC4J Configuration Assistant - skipped
Web Cache Configuration Assistant - skipped
Oracle Instance Configuration Assistant - skipped
Oracle Database Configuration Assistant - skipped
OC4J Instance Configuration Assistant - skipped
OPMN Configuration Assistant - skipped
Register DCM Plug-ins with EM - skipped
Application Server Control Configuration Assistant -skipped
DCM Repository Backup Assistant - skipped
Enterprize Manager Reposotory Creation Assistant - skipped
Log Details given about "Oracle Net Configuration Assistant" as
/usr/app/oracle_sw_owner/oracle/product/10..0/EM10g_1/oracle.swd.jre/bin/..
/lib/i686/native_thread/libzip.so : symbol errno version GLIBC_
Unable to initialize threads:cannot find class javalang thread not define in file libc.so.6 with link time referance (libzip.so)
could not create Java VM
configuration of assistant "Oracle Net Configuration Assistant" fail
When try to run sqlplus from xterm, it gives an following error :
$ /usr/app/oracle_sw_owner/oracle/product/10.1.0/EM10g_1/bin/sqlplus
Message file sp1<lang>.msb not found
Error 6 initializing SQL*Plus
After installation there is an information is given for Enterprise Manager Grid Control and it gives an url as http://localhost.localdomain:7777/em. But when i try to connect it gives an error massage as "The connection was refuse when attempting to contact localhost.localdomain:7777"
Same situation when i try to connect Enterprise Manager Application Server (its url: http://localhost.localdomain:1810). It gives an error massage "The connection was refuse when attempting to contact localhost.localdomain:1810"
What can i do in this situation? Please help me out.

Unable to start oracle app server 10g through opmnctl file Red Hat linux

Hi gurus,
I have a VM (Red Hat Linux based). I am not able to start my application server 10g through opmnctl file (exists in opmn/bin folder).
I open that folder opmn/bin through terminal and write the following command
opmnctl startall
nothing is happening... is there any way to start the server through GUI?
can you please guide me.
Thanks

process has been started now..Please post the result of$ $ORACLE_HOME/opmn/bin/opmnctl status
after that when I run the it from browser nothing is comming..Don't you get any error ?
for app server admin i wrote http://pcname:port/
This should work. Is port the correct one ? Check out $ORACLE_HOME/install/portlist.ini. Did you try IP address, instead of pcname ? Do you have any active firewall on your linux server ?
for simple form run http://pcname:port/frmservlet/
This one should be http://pcname:port/forms/frmservlet

Problem installing Oracle 8.0.5 on Red Hat Linux 7.0

Hi,
Due to a software requirement, I have to install Oracle 8.0.5 on Red Hat Linux 7.0. (I know Oracle 8.0.5 is pretty old and so as RH Linux 7.0 but that is what required).
I downloaded the Oracle8051EE_Intel.tgz from Oracle and tried to installed it but it didn't work.
It crashed out when it tried to run some of the SQL script during the installation using SVRMGRL. Later on, we found out all the binaries under $ORACLE_HOME/bin were corrupted during the installation. We did a comparison of the size of SVRMGRL and SQLPLUS and they are different from the Stage (or the one from the .tgz).
Does anyone have this problem before? Will 8.0.5 works on Linux 7.0?
Thanks in advanced for any help.
Best regards,
William
null

I'm having the same exact problem. The link you have provided
seems to be a bad link. I would really appreciate it alot if you
could help get us through this first step of starting the oracle
installer interface. I never thought it would be this hard to
get started.

Red Hat Linux Enterprise 5 64bit and Enterprise Manager 10.2.0.3 Install ?

Appreciate specific steps to ensure that Oracle Enterprise Manager 10.2.0.3 is installed as baseline for upgrade.
Red Hat Linux Enterprise 5.2 64bit.
The major problems are with the Configuration Assistant Web Cache during the Install. It fails with OUI-25031.
The configToolFailedCommands script contents is:
oracle.sysman.emcp.agent.AgentPlugIn

The root cause of Oracle Grid 10.2.0.3 did not install successfully was because of a Network Configuration Issue. i.e., some strange IP was being referenced over the internet and mapping it to my hostname of my server. I performed a "dig hostname" to see what ip was being associated with my so-called unique hostname. After fixing that problem and removing all of Oracle, I only had one warning with OPMN not starting. I discovered additional rpms that needed to be installed and all is good now until the next opportunity.
Learned Lesson: Pay Very Careful Attention to all configuration components and document as you go to ensure that you have your process documented.

Oracle 8i/9i and Red Hat Linux version

Hi,
Does anyone know, which is the earliest version of Red Hat Linux
supported by Oracle 8i or 9i?
Regards

Hi,
I downloaded the 9i, the installation started ok and I was
able to complete the install procedure, but a few things did not
go as I planned:
1.- The installation MUST be run on the console X, and cannot
be run from a remote terminal (odd!).
2.- On a 2-CPU machine the installation didn't install all the
files for the sistem to start.
3.- During a second attempt the installer issued an error
regarding a compilation problem.
Can anyone help me, I can't get the installer running without
problems.

Error in Oracle10gr2 installation on Red Hat linux AS4 (64-bit) itanium2

Hello All,
I installing oracle10R2 on Red Hat Linux 4 U4 Enterprise Server but got the following errors:
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer
from /tmp/OraInstall2007-04-26_11_11AM. Please wait....
[oracle@rx36 database]$ #
# An unexpected error has been detected by HotSpot Virtual Machine:
# SIGILL (0x4) at pc=0x2000000000038a4070, pid=6102, tid=2305843009216825632
# Java VM: Java HotSpot (TM) 64-Bit Server VM(1.4.2_10-b03 mixed mode)
#Problematic frame:
What should I do?
Thanks.
Message was edited by:
user571878

Hi,
Please refer to following statement to do:
=============
How to install Oracle RDBMS version 10.2.0.2 (or higher)
To install 10.2.0.1 and then 10.2.0.2 (or higher) on Linux Itanium, do the following :
[1]. Download Patch 5390722 and run the supplied OUI to install Montecito JDK and JRE into the new 10.2 home
* Unzip the patch
* Start OUI from Patch 5390722 and install JDK into the new 10.2 home
* Start OUI from Patch 5390722 and install JRE into the new 10.2 home
[2]. Install 10.2.0.1 into the new 10.2 home by running OUI from the 10.2.0.1 DVD :
./runInstaller -jreLoc $ORACLE_HOME/jre/1.4.2
NOTE: During the installation (on the "Product Specific Prerequisite Checks" page) the "Checking for Oracle Home incompatibilities..." check will fail. Click the check box next to it, so that the status changes to "User Verified", and continue with the installation.
[3]. Install 10.2.0.2 (or higher) into the new 10.2 home by running OUI from where the patchset has been unzipped :
./runInstaller -jreLoc $ORACLE_HOME/jre/1.4.2
Terry

Installing 11i apps on windows xp and Red Hat linux AS 3.0

Hi,
I am a newbie to Oracle E-business suite............i will be very helpful if anybody could help me with the full procedure on how to install Oracle apps on windows on Windows XP and Red Hat linux AS 3.0.........starting with configuring ip.....i would really appreciate if somebody helps me out...........well thanks in advance..waiting for a optmistic reply...
Thanks again,
Virendra

I have done installation on XP and 2000 servers are heres the steps... detailed ones. I also request those who install Oracle Apps 11i to first read the installtion pdf's which helps you understand clearly the prerequisites overall.
You cannot find the Pre installtion steps(such as Mks Toolkit and GNUMake config) in more clear terms from those documents.Which are explained here.
The Must PDF's to refer before installation
1)r1152ins.pdf
2)11iconcepts.pdf
According to the 11iconcepts PDF you can decide your business needs the N-Tier Architecture and Database Server and Application Tier Server File System in a very clear terms.
The installation process can be divided into
Pre Installtion,Installation and Post-Installation stages.
I would caution everyone to concentrate more on Pre Installation stage and which is more critical for a successfull installtion of Oracle Apps and to be free with later cropping up problems.
Further before moving into Installtion stages i have to Explain the Number of CD's and Installtion type's in Oracle App's.
In many places you may need to wait patiently even more than 10 minutes for screens(Dialog Boxes) to appear dont conclude prematurely some problem on system.
In oracle Apps 11.5.1 it consist of 12 CD's.
1) Start Here CD(RAPID Installation Wizard)
2)1-11 CD's
1-3 Application Top information
4th Oracle DB
5-6 IAS and other tools
7-11 Oracle Apps DB.
You have to decide whether you are going to do a Single Node Installation(No Post-Installation Task) or Multi Node Installation. Refer(r1152ins.pdf)
While installing for Multi Node you can see the Installation locations to be mentioned as
Appl_Top,Common_Top,Data_Top etc.Try to install Appl_top and common_Top in one drive and Data_Top in another Drive(Single Node) and in different nodes in Multi Node installation.
Installation Types
Production ==>Real time Env implementation's
Test ==>For test Env Purposes
Vision Demo==>R&D or learning Purposes.
Pre-Installation steps
======================
Space Requirement for types of installtions
Install VC++
How to Download and install MKS tool Kit
How to Download and Configure GNUMAKE
Env path setting
Create Applmgr user in Win2000
Space Requirement for types installtion:
Memory Requirement
1 GB of RAM(512 Fine for initial Installtion)
but planned for more user connections another 1 GB of Ram and according to the number of user's and Application needs you have to Increase the Memory.
HDD capacity
APP_Top(A)
COMMON_TOP(C)
DATA_TOP(D)
Test DB : 22 + 20 GB (60 GB recommended)
Prod DB : 22 + 20 GB (60 GB recommended)
Vision Demo DB: 22 + 35 GB (80 GB recommended).
Plus space for ur staging area.
This are the actuall space required for the Oracle Apps Alone plan for more space for future needs etc.
Softwares on System
Win2000 server with Patch1,Winzip and Acrobat Reader Latest version etc.
Install VC++:
Install a clean installtion of VC++ of Visual Studio Family 6.0
It should be first installed before installing MKS or GNUMAKE
NOTE: When Visual C++ is installed, let the installer register all environment variables. This will allow executables to be linked from the command line.
How to Download and install MKS tool Kit:
Note:Try to purchase the MKS tool kit from the below site.
or try to download the trial version valid for a months time.
http://www.mkssoftware.com/products/tk/ds_tkio.asp
Evaluation copy from
http://www.mkssoftware.com/eval/
Choose "MKS Toolkit for Interoperability " Download it in C:\
Again you have to click the downloaded kit to start the actual download of 38 MB of MKS tollkit Evaluation version.
You will be sent a Demo serial number to your mail id==>copy the same to a Notepad on your desktop.
Now start the installtion of the MKSToolkit on your system by clicking on the MKStoolkit downloaded.
It will prompt you for the Demo serial number which has to be provided.
The MKStoolkit will be successfully installed.
How to Download and Configure GNUMAKE:
1) HOW TO GET AND INSTALL GNUMAKE ON WINDOWS2000
This can be done by performing the following steps:
NOTE: Please, be aware that you must install Visual C++ BEFORE installing GNUMAKE, because its installation process involves linking executables.
1) Before downloading GNUMAKE, you will need to acquire some utilities which will be used for unpacking files. You can obtain the required utilities at the following
URL: ftp://ftp.gnu.org/gnu/windows/emacs/utilities/i386/
The directory contains the following files:
README
djtarnt.exe
gunzip-1.2.4-i386.exe
gzip-1.2.4-i386.exe
tar-1.11.2-i386.exe
tar-1.11.2a.exe
Only two of the files are required:
gunzip-1.2.4-i386.exe and tar-1.11.2a.exe
2) After downloading the above files, rename them as follows:
gunzip-1.2.4-i386.exe => gunzip.exe
tar-1.11.2a.exe => tar.exe
Place them into a directory that you can set in you PATH environment variable.
3) Point your browser to the following
URL: ftp://ftp.gnu.org/gnu/make
The files needed from this directory are:
make-3.77.tar.gz
make-3.78.1.tar.gz
make-3.79.1.tar.gz
make-3.79.tar.gz
Development requires to install version 3.77 or above. Downloading the latest version is perhaps best decision, but there are advantages to downloading the version required by development (3.77). (This document assumes that version 3.77 has been downloaded) (NOTE: AVOID USING SPACES IN
DIRECTORY AND FILE NAMES. GNUMAKE,VISUAL C++, ETC. DO NOT ALWAYS DEAL WELL WITH SPACES)
4) For instance, suppose you have downloaded file make-3.77.tar.gz on a directory called C:\GNUMAKE, unpack this file using gunzip.exe from a Command Prompt Window
Example: C:\GNUMAKE>gunzip make-3.77.tar.gz This last action, will expand file make-3.77.tar.gz and the extension .gz will be removed.
5) On the same Command Prompt Window, you should UnTAR the file, with the following
command: C:\GNUMAKE>tar -xvf make-3.77.tar This will create a new subdirectory called MAKE-3.77 under C:\GNUMAKE, the original directory.
6) In the new subdirectory, there is a batch file
called build_w32.bat; run the batch file to generate GNUMAKE.EXE
Try this from Command Prompt more than once if succesfully not built message appers till you get Generated successfully.
Note:If Possible run all the bat files in the MAKE-3.77 and also config.bat in the sub directory by double clicking it.
WARNING: There is a known issue with this last step, "GNU make fails to build regardless of chosing build_w32 or nmake"
See [NOTE:115937.1]
for work around. RELATED DOCUMENTS ----------------- For Microsoft Visual C++, MKS Toolkit and
GNUMAKE support, you should contact their respective vendors Microsoft Visual C++, MKS Toolkit
and GNUMAKE are registered trademarks.
http://support.microsoft.com/ http://msdn.microsoft.com/ http://www.mks.com/
http://www.gnu.org/ Note:104010.1: Release 11i on NT: Software Requirements
Note:115937.1: GNU Make won't make on windows NT
Important:All the downloaded files from GNU makes web sites shall be put in a single folder called gnumake under c:\ .Try to search for config.bat file inside this folders just click and
run it.
Env path setting:
Try to search make.exe generated in c:\program files\mkstoolkit\mksnt and copy and paste it
c:\gnumake\MAKE-3.77\windebug and c:\gnumake\MAKE-3.77\winRel also paste both this paths in the
My Computers==>Properties==>Advanced==>Environment variables==>Path setting's
After all this check as follows from CMD mode.
1)execute make at c:\>
2)execute gnumake at c:\>
In win2000 it may return error messages or Target wrong ignore it.If it is on Win NT then it will return proper status.
Create Applmgr user in Win2000:
Create a Applmgr user account in win2000 .
Installation:
=============
What here you require is the Patience .
Load the START HERE CD and run the C:\> cd \cdrom\rapidwiz
For Test and Prod it will ask for the location of Appl_Top,Common_Top and Data_Top location. Mention there path and ensure if more than one installtion say eg.Vision and Test or Prod to check the Path in all the tab pages its corresponding values and path's.
In Vision Demo many of the Options are not propmted from the user.
It will then do the system checking for Host Name and other details.All the checking should have been passed or if failed it will mark it in RED cross mark.Rectify the mistake and then onceagain proceed or else you will have problem after installation.
The Installation time takes around 5 to 6 Hrs of time.
For info on Post installation or on Multi Node follow the pdf's i have mentioned above.
The most tedious of all is succesfully crossing the Apps system checking it does for all
installed products it requires without any failure.
The GNUMAKE configuration or steps were nowhere given and it was all our trail and error exp.
This is possibly the most elaborate steps to install Apps on Win. post for further help. email me at [email protected] or [email protected]
Rajeev.

How to run Weblogic Server 8.1 in Win 98/Red Hat Linux

I've receieved the Weblogic Server 8.1 Evaluation version. I've installed it successfully. But while I try to start the Weblogic Server the progress bar shows the completion of the server start but the indicator does not turn green. What might be the reason.Same is the problem with Red hat Linux 8.0 ? Please send in the solution

Joydeep,
WebLogic Platform 8.1 is not supported on Win 98 and Red Hat 8.0. Please
refer to the following url for more information.
http://e-docs.bea.com/platform/docs81/support/supp_plat.html#1048419
Regards,
Raj Alagumalai
WebLogic Workshop Support
"Joydeep Paul" <[email protected]> wrote in message
news:3f4e9723$[email protected]..
I've receieved the Weblogic Server 8.1 Evaluation version. I've installedit successfully. But while I try to start the Weblogic Server the progress
bar shows the completion of the server start but the indicator does not turn
green. What might be the reason.Same is the problem with Red hat Linux 8.0 ?
Please send in the solution

JVM problem in installing oracle9i on Red Hat Linux ver 4.18

Hi ,
I am facing problem in installing oracle 9i on Red Hat Linux ver 4.18
Error are
" Initializing Java Virtual Machine from /tmp/OraInstall2007-06-10_12-11-22AM/jre/bin/java. Please wait...
Error occurred during initialization of VM
Unable to load native library: /tmp/OraInstall2007-06-10_12-11-22AM/jre/lib/i386/libjava.so: symbol __libc_wait, version GLIBC_2.0 not defined in file libc.so.6 with link time reference"
can anybody help me?

Hi,
You should consider installing Oracle patch 4198954.
You can obtain it from Oracle Support (Metalink).
Regs,
Olivier Guyot

Configuring startWebLogic.sh for Red Hat Linux 7.2

I was successful in configuring and executing startWeblogic.cmd, but have not been
so lucky getting the equivalent to run on Red Hat 7.2 using startWebLogic.sh.
For starters, even before I began editing startWeblogic.sh and just tried running
I received the following error:
: command not found
: command not found
: command not found
: command not found
startWebLogic.sh: line 59: syntax error near unexpected token `elif'
'tartWebLogic.sh: line 59: `elif [ ! -f $WL_HOME/lib/weblogic.jar ]; then
I've included both my startWebLogic.cmd and startWebLogic.sh files so that you
can see what I'm trying to port to the sh file. I'm hoping I'm close to getting
this to execute and run within Linux so please accept my thanks in advance to
anyone who might have some suggestions. Interestingly enough I was able to get
wls to start using ant, but that is obviously only good for my development env.
The point being I'm hoping I'm close to reaching a solution.
Below is what my startWebLogic.cmd file looks like:
@echo off
@rem This script can be used to start WebLogic Server. This script ensures that
@rem the server is started using the config.xml file found in this directory and
@rem that the CLASSPATH is set correctly. This script contains the following variables:
@rem
@rem JAVA_HOME - Determines the version of Java used to start
@rem WebLogic Server. This variable must point to the
@rem root directory of a JDK installation and will be set
@rem for you by the WebLogic Server installer. Note that
@rem this script uses the hotspot VM to run WebLogic Server.
@rem If you choose to use a JDK other than the one
@rem included in the disribution, make sure that the JDK
@rem includes the hotspot VM. See the WebLogic platform support
@rem page (http://e-docs.bea.com/wls/platforms/index.html)
@rem for an up-to-date list of supported JVMs on Windows NT.
@rem
@rem When setting these variables below, please use short file names (8.3).
@rem To display short (MS-DOS) filenames, use "dir /x". File names with
@rem spaces will break this script.
@rem
@rem jDriver for Oracle users: This script assumes that native libraries
@rem required for jDriver for Oracle have been installed in the proper
@rem location and that your system PATH variable has been set appropriately.
@rem For additional information, refer to Installing and Setting up WebLogic
@rem Server (http://e-docs.bea.com/wls/docs61/install/index.html).
SETLOCAL
cd ..\..
title WebLogic Server
@rem Set user-defined variables.
set JAVA_HOME=T:\bea\jdk131
if "%CLOUDSCAPE_HOME%"=="" set CLOUDSCAPE_HOME=T:\Cloudscape_3.6
if "%LOG_HOME%"=="" set LOG_HOME=T:\jakarta-log4j-1.2
if "%JIKES_HOME%"=="" set JIKES_HOME=T:
if "%BAS_ORACLE_HOME%"=="" (set ORAPATH=) else (set ORAPATH=%BAS_ORACLE_HOME%\ORA90\JDBC\LIB\classes12.zip;%BAS_ORACLE_HOME%\ORA90\JDBC\LIB\nls_charset12.zip;)
@rem Check that script is being run from the appropriate directory
if not exist lib\weblogic.jar goto wrongplace
goto checkJDK
:wrongplace
echo startWebLogic.cmd must be run from the config\blueagave directory. 1>&2
goto finish
:checkJDK
if exist "%JAVA_HOME%/bin/javac.exe" goto runWebLogic
echo.
echo Javac wasn't found in directory %JAVA_HOME%/bin.
echo Please edit the startWebLogic.cmd script so that the JAVA_HOME
echo variable points to the root directory of your JDK installation.
goto finish
:runWebLogic
echo on
set PATH=.\bin;%PATH%
set CLASSPATH=.;%ORAPATH%.\lib\weblogic.jar;%CLOUDSCAPE_HOME%\lib\cloudscape.jar;%LOG_HOME%\dist\lib\log4j-1.2.jar;.\config\blueagave\serverclasses
echo off
echo.
echo ***************************************************
echo * To start WebLogic Server, use the password *
echo * assigned to the system user. The system *
echo * username and password must also be used to *
echo * access the WebLogic Server console from a web *
echo * browser. *
echo ***************************************************
@rem Set WLS_PW equal to your system password for no password prompt server startup.
set WLS_PW=xxxx
@rem Cloudscape-specific defines
set CLOUDSCAPE_DEFINES=-Dcloudscape.system.home=./config/blueagave/data -Dcloudscape.storage.pageCacheSize=200
-Dcloudscape.language.statementCacheSize=200
@rem Set Production Mode. When set to true, the server starts up in production
mode. When
@rem set to false, the server starts up in development mode. The default is false.
if "%STARTMODE%"=="" set STARTMODE=true
@rem Add the following -D option to the JVM WL start-up command (after %CLASS_PATH%)
to change
@rem the query execute mode. The default is JDBC_ONLY and the other choices are
EIS_ONLY,
@rem BOTH_JDBC and BOTH_EIS (the two "BOTH_XXXX options internally execute both
versions of the
@rem query but only the results of the _XXXX form are returned to the query submitter).
@rem -Dcom.blueagavesoft.query.ExecMode=BOTH_JDBC
echo on
"%JAVA_HOME%\bin\java" -hotspot -Xms192m -Xmx192m -XX:MaxPermSize=64m -classpath
"%CLASSPATH%" -Dweblogic.Domain=blueagave -Dweblogic.Name=baserver -Dbea.home=T:\bea
-Dweblogic.management.password=%WLS_PW% -Dweblogic.ProductionModeEnabled=%STARTMODE%
%CLOUDSCAPE_DEFINES% -Djava.security.policy==T:\bea\wlserver6.1/lib/weblogic.policy
%JAVA_DEBUG% weblogic.Server
goto finish
:finish
cd config\blueagave
ENDLOCAL
[startWebLogic.sh]

Thanks Micheal!
"Michael Young" <[email protected]> wrote in message
news:[email protected]..
Hi.
download here: http://commerce.bea.com/downloads/weblogic_server.jsp
installation instructions here:
http://edocs.bea.com/wls/docs61/install/index.html
Regards,
Michael
Help Needed wrote:
Hi All
Where can i download weblogic for red hat linux 7.2? Does that come
with
instruction on how to install it and if not where can i find the
instruction!!
Any will will be appricated.
Michael Young
Developer Relations Engineer
BEA Support

Missing Listener.ora after installing 8i on Red Hat Linux 6.1

Hi
After Installing Oracle Enterprize Edition on Red Hat Linux 6.1(Using two patches viz jre1.1.6 and linux_815patches)& created default database with sid ORCL.But listener.ora is missing in $ORACLE_HOME/network/admin.
So showing error when ever trying to start lsnrctl service.
What is the reason ? How can you we get default listner.
Is there any other way to connect client and server without listener.ora.
please reply immediately.
null

Create and configure it. See Section 5:
http://homepages.tig.com.au/~jmsalvo/linux/oracle8i.html

Installation of Oracle EBusiness Suite 11i Release 10.2 on Red Hat Linux

Hello there,
It would be great if someone can help me with these questions
1. Which version of Red Hat Linux is suitable for installation of Oracle EBusiness Suite 11i Release 10.2.
2. I am downloading the EBS files from eDelivery site on my machine (Windows based). These are Zip files. How would these be usable on Linux machine?
3. Do I need stuff like MKS Toolkit on Linux? We tried installing on Windows 2003 server but had to abandon because we don't have MKS Toolkit. Is there some such pre-requisite on Linux?
Thank you.
Rahul

Copy all zip files to say /data/stage11i then unzip all files (as root) the process will create the correct file structure, you do not need to run adautostge.pl then in a terminal screen go to /data/stage11i/Disk1/rapidwiz and then type ./rapidwiz the installation wizard then guides you through the rest of the way. Run raoidwiz as root if you need multi user or for the demo single user run rapidwiz as oracle. Make sure you have created user and group for oracle and applmgr, also make those changes in the wizard it often defaults to say user oravis group dba. In linux you should have created localhost.localdomain sometimes the eth0 does not start, stop it in the device manager and then reactivate. Hope that helps.

ORA-01017: OS Authentication on Red Hat Linux 6.2 and Oracle 11gR2

Hello
I am trying to eanble OS Authentication on Oracle 11.2.0.3 installed on a Red Hat Linux Server 6.2 and it just does not work. When I try to login I always get the error ORA-01017: invalid username/password; logon denied
I have set the following Oracle parameters:
remote_os_authent = TRUE
os_authent_prefix = OPS$
and i have created a linux user "oracle" and the Oracle user "OPS$oracle".
I know that the parameter remote_os_authent in 11g is depricated but i thought that it still should work, just an error messages occures then i start the database but it runs as usual, just the OS Authentication does not seem to work.
Does anyone knwo where the problem could be?
Oracle said that remote_os_authent is depricated because as it is risky, i know that, but my database is in a secure environment without any connection to the internet. What other way would there be without using remote_os_authent?
Thank you very much for your help.
Regards Bernhard

Thanks for the link, i found that i used a case sensitive user name as i created the user with "OPS$USERNAME" and this was why i cound not connect with that user.

TD340 Red Hat Linux 6.4 during start up give Kernel Panic

Similar Messages

Maybe you are looking for