TDM Not Working

I have a mid-2010 iMac with mini-display port. This is the target computer I want to turn into a glorious monitor.
I also have a late 2013 MacBook. This is the superfast computer whose ram and hard-drive I want to exploit.
I have a thunderbolt cable which is connected to both machines. Command-F2 does not do anything.
Halp.

If your iMac is a 21-inch model, Target Display mode isn't available. Use a product such as ScreenRecycler.
If your iMac is a 27-inch model, you need to use a Mini DisplayPort cable.
(123463)

Similar Messages

Logic 8 TDM not working

Hi - I have the following setup.
Intel Dual Core Xeon 3 GHz
Protools 7.4
Logic 8.0.2
OSX 10.4.9
Protools HD 3 connected to Apogee AD16x (via Digilink) and then to Apogee DA16X.
In Preferences - Audio I have selected TDM driver Only. I am not getting any sound. When it plays an error message comes up 'Error while trying to synchronize Audio and MIDI'
I can get sound using Digicore Audio but am limited to 8 outputs and cannot use my TDM.
Does anybody have a similar setup working? Any ideas on how to get it working?
Cheers
G

We had the same problem.
I remember something like it mattered from partitions on the harddisc.
We found the hint on the Digiforum. After removing partitions it worked.
But sad to say, Logic and TDM don't work really together. There are so many annoying things I would need pages to describe.
I moved now to PT. Boring but working.
Tim

IMac TDM not working

Hi
Iv just got my new iMac 2013 27"
iv also got a iMac 2011 27"
i whant to use the new as a display for the old or the old as a disply for the new.
i know about the CMD+F2 (FN+CMD+F2) but it wont work.
what am i doing wrong , im using a mini-display cable (not from apple)
/Thomas

Then you do not have what Apple calls an "iMac (27-inch, Mid 2011)" model. To confirm this, open System Profiler (or System Information if you are running a recent version of OS X) from the Apple menu. In the Hardware Overview section, you should see a line that says "Model Identifier."
If it is a 2011 27" model the IDD should be iMac12,2 (which has Thunderbolt). If it is the 2010 model (which does not have Thunderbolt) it will say iMac11,3.

Target Display Mode not working iMac 27(2012) Bootcamp to iMac 27(2013)

Hi All,
I recently purchased an iMac 27" 2013 which replaced my iMac 27" 2010.
===============
PREVIOUS SETUP
===============
(1) iMac 27" 2012 - Running Windows 8.1
(2) iMac 27" 2010 - Running OS X Mavericks
(1)+(2) were connected with a Mini-Display-Port cable.
(1) was using (2) as external display while (2) was set to Target Display Mode using CMD+F2
==============
CURRENT SETUP
==============
(1) iMac 27" 2013 - Running Windows 8.1
(2) iMac 27" 2012 - Running OS X Mavericks
(1)+(2) are connected with Thunderbolt cable.
(1) can't use (2) as external display anymore becuase CMD+F2 has no effect anymore on (2) in this scenario.
If (1) and (2) are both running OS X all works as expected.
I am aware about the support hint from Apple where they state TDM is not working under Bootcamp.
And I agree, while booted into Windows Bootcamp this machine can't serve as external display. Makes sense because TDM is baked into OS X display drivers.
Anyone had the same experience and came to a soltuion?
Thanks,
Martin

"Apple has no plans to implement a client driver for Windows since there is no Thunderbolt SW stack available for Windows like there is for Display Port."
That is a little bit funny since Gigabyte and other big companies have said that 2014 is the year that they are going to implement Thunderbolt in many motherboards.
"GIGABYTE 7 series motherboards are the very first to offer fully certified dual onboard Thunderbolt™ ports. Capable of connecting up to 12 devices plus 3 digital displays simultaneously with breathtaking data transfer speeds that can transfer 1TB of data in only five minutes, GIGABYTE Thunderbolt™ motherboards offer the fastest connection interface on the desktop PC."
Have you asked Apple about that? I dont understand why Apple is crippling Thunderbolt on their devices...

Can I restore my system from install discs when DVD drive is not working?

Can I restore my system from install discs when the DVD drive in my iMac G5 is not working?
There is a disc jammed in the drive and when I try to do an install in Target Firewire mode using a G5 Tower I get an error saying the software cannot be installed on this machine, before I can even select the iMac's drive. I'm using the grey software install discs that came with the iMac.
Is my only option to open up the iMac and get the jammed disc out?
Thanks

You need to set up the FireWire Target Disk mode installation with the iMac as host, so that it runs its own install disk. The G5 tower should be the target, so that you are "borrowing" only its DVD drive.
Shut down the iMac. Put the iMac install disk into the G5 tower, and reboot the G5 tower into TDM by holding down the T key. Connect the FireWire cable and then restart the iMac while holding down the option key. Hopefully the iMac startup manager will see the install disk that is in the tower; if so then select it and boot from there.

Migration Assistant 10.6 only recognizing Firewire option, still not working

I'm attempting to use Migration Asssitant to transfer a user from a MacBook to an iMac. Both systems are using 10.6.8 and are on the same wireless network.
PROBLEM 1 – Migration assistant is only giving the option of transferring via FireWire; it won't give Ethernet or Wireless options. Yes, with an Ethenet cable connected between the computers, and yes, with the computers on the same wireless network.
PROBLEM 2 – Even over Firewire it's not working. With the MacBook in target drive mode, the "Select the System to Migrate From" window shows two drives, both named "Button". Button is not the name of the (one) drive. Selecting one or the other brings you to the "Pick Users To Transfer To This Machine" page, which just hangs forever.
Super frustrating. Help? I couldn't find anything else about this in the forums.
--J.

Try this. Erase the iMac, reinstall the OS, and on first boot, use the Setup Assistant. See Pondini's Setup New Mac guide, which should be comparable to what you're trying to do. BTW, no need for TDM.

Answer-address not work

Dear Admin,
I have tried few day already to match inbound call base on Calling number.
Call made from calling number range 8000-9 and try to terminate the call by prefix 332168 thru TDM link but it was not work.
Below is my scenario and configuration detail. Please advice if anything wrong.
Partner A ( Over SIP protocol ) ------> ( Inbound SIP ) AS5400 ( TDM )----->PSTN
dial-peer voice 332855 pots
description Outbound to TDM-A
max-conn 1
answer-address 800[0-9]
destination-pattern 332168.
progress_ind alert enable 8
port 6/7:D
dial-peer voice 3328551 voip
description Inbound Sip from KZ
voice-class codec 1
session protocol sipv2
answer-address 800[0-9]
Best Regards,
Daneth

Call Apple Care and ask for the Account Security Team. They can assist you with your issue.

Not work tablet UI on Prestigio 5080 PRO tablet

I read that browser.ui.layout.tablet = "1" can fix this problem. But it not works. I can work only in pnone interface that is not good for my 8'' tablet.

Would it be possible for you to share the problematic pdf and OS information with us at [email protected] so that we may investigate?
Thanks,
Adobe Reader Team

Why self-defined access sequences of free goods can not work?

Hi gurus,
I have maintained access sequences of free goods self-defined.but when i creat the SO it does not work!
when i used the standard access sequences ,it is OK .
Can anybody tell me why?
thanks in advance

Dear Sandy,
Go to V/N1 transaction select your self defined access sequence then go in to the accesses and fields and check all fields are activated.
Make sure that these fields are flowing in your sales order.
I hope this will help you,
Regards,
Murali.

Adobe bridge raw not working with windows vista in photoshop cc, why?

adobe bridge raw not working in photoshop cc, is there a fix?

Your sure your using photoshop cc on windows vista?
I was under the impression that photoshop cc would not even install on windows vista.
What version of camera raw do you have?
In photoshop under Help>About Plugin does it list Camera Raw and if so which version is it?
(click on the words Camera Raw to see the version)
Camera raw doesn't work if it's a camera raw file or some other file type such as jpeg or tif?
What camera are the camera raw files from?
Officially camera raw 8.3 is the latest version of camera raw that will work on windows vista.

Adobe Bridge CS5 in windows 7 not working?

Adobe Bridge CS5 in windows 7 not working. I was using bridge perfectly for last 2 years. It stops working since 3 days. I tried to install updates. Showing some error to install.
Tried to install creative cloud..again some error. Error code : 82
Could you please advice how I can fix my adobe bridge.

https://www.youtube.com/watch?v=xDYpTOoV81Q&feature=youtu.be
please check this video I uploaded..this is what happens when I click adobe bridge.. just blinks and go off. bridge not working on task manager

ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW

ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW

BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

Partner application logoff not working

We have a partner application registered with sso with custom login screen. The login works fine. We use the following code to logoff the partner application in logoff.jsp
response.setHeader("Osso-Return-Url", "http://my.oracle.com" );
response.sendError(470, "Oracle SSO");
session.invalidate();
but the logoff is not working properly. It is not invalidating the session and the logout http request is not going from the application server to the sso server.
Are there any additional configurations for SSO logoff.Any help is appreciated.
Thanks

Hi
The WF should also trigger if i add the Partner function in UI.If i change any Attribute the WF triggers but i dont want to change the attribute when i add the partner function.
If i have only one event for WF that is Partner Change the WF will not trigger it for the 1st time when i save the UI. But next i come to the same saved doc and add a partner function then the Wf triggers.
So this means that Partner change is active.
the issue here is i need to trigger the WF on , the 1st time i save the UI, for which i wil be using Attribute Change and next time when i come back to saved doc the and add only the partner function and no changes are made to attributes the WF should again trigger.
Thanks
Tarmeem

IPhone 4 Voice Memos not working/saving

Hi there,
I'm having trouble with my voice memos too. Up until yesterday they were working fine and now, even though the record button works, the stop button does not and I can only pause them. Worse again is that the button to go into the menu to view all voice memos is not working so I can't play them from my iPhone and nothing new is saving to my iTunes. Please help!

I've always had the "Include Voice Memos" option selected. I think that only pertains to syncing voice memos from iTunes to the iPhone after it has been copied to iTunes. It has to be the new OS/iTunes not communicating that new memos have been recorded. For some reason they won't sync when I want them to, and then a few syncs later they magically appear.
By the way, I'm VERY comfortable with the iTunes and iPhone systems. I've been using iTunes for 5 years, and I've been recording class lectures with the iPhone voice memo app (and another app) for a couple years. It's not an error of not seeing that the memos were added; they don't exist in my library or music folders.
JUST OUT OF CURIOSITY, POST WHICH FIRMWARE YOU ARE RUNNING EXACTLY!!!
I'm on an iPhone 4, running firmware 4.0.1

Installed Premiere Pro CS4 but video display does not work?

I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
Ron

I would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2

TDM Not Working

Similar Messages

Maybe you are looking for