TDMS Post Configuration

Hi All,
I have implemented both the addon(DMIS and DMIS_CNT) on all the four systems and also generated the profiles for role SAP_TDMS* , SAP_DMIS* , SAP_CMIS* , SAP_SLOP*. Can you please guide me or give me the step by step procedure to create a test Project and test sub-project to test my configuration before I handover the system to the functional team.

Dear Anubhav
Good to  see the initaition part make sure after the add ons certain notes been applied beforein your system
Note no : 1357010 , 1362451 ,1363820 , 1367836 must be implemented .
>2) You need to cerate 2 CPIC users in all your systems with roles been defined as
>Sender : User : TDMS_RFC
>Role SAP_TDMS_user
>Reciever: User : TDMS_RFC
>role
>SAP_TDMS_Master & SAP_TDMS_User
>Central/ Control System
>user : TDMS_RFC
>Role : SAP_TDMS_user
>and one dialog user should exist in Central System with role as SAP_TDMS_Master
>once all  these users been created
>3)then go to T code CNV_MBT_TDMS
>clickon create project , then Subproject then pakage .. once the pacakge been created go with the RFC phase ..
>you can read the documentaion for further consideration while double clicking the sameor the documentaion tab at the top.
regards
Mysterious

Similar Messages

  • SAP PI 7.0 post configuration

    Hi,
        I have installed SAP PI 7.0 and completed  all the post configuration steps. But still even   I am not getting the <b>Adapter Engine : value ( as Integration Server )</b> while creating communication channel.
      Anyone can help me...it is very urgent..please
    Thanks
    Apparao.

    Hi
    Is this the error u are getting
    /people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory
    Just have a lok at this post installationsteps.
    http://help.sap.com/saphelp_nw70/helpdata/en/4b/c25a42793d1653e10000000a155106/frameset.htm

  • Xi post configuration

    Hi,
    while doing Xi post configuration. In TCode SWF_XI_CUSTOMIZING all services are activated except schedule background job for deadline monitoring. The following error is coming.
    Error within method CL_SWF_ADM_JOB_FACTORY=>GET_INSTANCE->Automatic     12.11.2008     09:44:49     SAP_BASIS     Schedule Background Job for Deadline Monitoring

    Hi,
    Check the sap note no. 1117735
    Implement the attached correction instructions from SAP note 1117735. You must then make the following manual changes:
    Call transaction SM30.
    Maintain the view SWFCTASK.
    Delete all the rows (usually two).
    Customizing Object = "CL_SWF_CST_DEADL_SERVICE_JOB"
    Save your changes.
    As an alternative, you can import the relevant Support Package.
    Thanks!

  • 1760 tdm clock configuration problem

    I need
    Router(config)# tdm clock E1 0/0 both export line
    Router(config)# tdm clock E1 0/1 both import E1 0/0 line
    And I cannot enter command {tdm clock E1 0/1 both import E1 0/0 line}. Error message {% E1 data switch not available for this configuration}. Why?

    check out the following conditions before configuring TDM clock:
    * BRI interfaces should be shut down before using the no tdm clock command for BRI.
    * The configuration for a ds0/pri/channel/tdm group on a T1/E1 must be removed before deleting the TDM clock configuration for T1/E1.
    * Any residual or default TDM clock configuration must be deleted before creating a new TDM clock configuration.
    * If an export port is configured, the line protocol must be up before configuring any import ports.
    * On a Cisco 1751 or Cisco 1760 router, if one port is configured as export, all other ports must be configured as imports.
    * An export port clock can be turned off only after all the import ports (including BRI-auto ports) are turned off.
    * The configured TDM clock and the status of the running TDM clock might be different, depending on the line conditions and connections.

  • Fusion Applications  -  Post Configure  - ECSF Issue

    Hi,
    We are installing Fusion Applications 11.1.4.0.0 and during Post Configuration Phase are encountering the following error:
    ECSF configuration failed. Error message: Java returned: 1] ERROR
    The complete error reported:
    [2012-12-26T09:19:04.968+05:30] [runProvisioning-hcm-postconfigure] [ERROR] [FAPROV-00101] [runProvisioning-hcm-postconfigure] [tid: 25] [ecid: 0000JjKsJNfFg4WFLzfP8A1Gq_P900000G,0] [arg: /u01/oracle/fusion/provisioning/provisioning-build/orchestration-build.xml:3495: The following error occurred while executing this line:\n/u01/oracle/fusion/provisioning/provisioning-build/orchestration-build.xml:3286: The following error occurred while executing this line:\n/u01/oracle/fusion/provisioning/provisioning-build/common-misc-build.xml:109: An Error Occured:  The following error occurred while executing this line:\n/u01/oracle/fusion/provisioning/provisioning-build/base-product-family-build.xml:350: The following error occurred while executing this line:\n/u01/oracle/fusion/provisioning/provisioning-build/hcm-build.xml:1566: The following error occurred while executing this line:\n/u01/oracle/fusion/provisioning/provisioning-build/hcm-build.xml:1259: The following error occurred while executing this line:\n/u01/oracle/fusion/provisioning/provisioning-build/base-fusion-app-build.xml:168: The following error occurred while executing this line:\n/u01/oracle/fusion/provisioning/provisioning-build/search-app-build.xml:418: The following error occurred while executing this line:\n/u01/oracle/fusion/provisioning/provisioning-build/search-app-build.xml:535: The following error occurred while executing this line:\n/u01/oracle/fusion/provisioning/provisioning-build/atgpf-build.xml:2678: The following error occurred while executing this line:\n/u01/oracle/fusion/provisioning/provisioning-build/common-misc-build.xml:109: ECSF configuration failed. Error message: Java returned: 1] ERROR: /u01/oracle/fusion/provisioning/provisioning-build/orchestration-build.xml:3495: The following error occurred while executing this line:[[
    /u01/oracle/fusion/provisioning/provisioning-build/orchestration-build.xml:3286: The following error occurred while executing this line:
    /u01/oracle/fusion/provisioning/provisioning-build/common-misc-build.xml:109: An Error Occured: The following error occurred while executing this line:
    Please let us know if anyone has encountered this issue and if not how it can debugged further ? Verified for all know issues , Pathes, Release Notes and Blogs. Please advise if anyone know how to proceed ahead ?

    Kalyan,
    ECSF configuration is failing at the following code section in build file:
    <if>
    <os name="AIX"/>
    <then>
    <java classname="oracle.ecsf.util.ProvisioningUtil" fork="true" classpathref="ecsf.classpath" failonerror="true">
    <arg value="${temp.ecsf.config.file}"/>
    <sysproperty key="oracle.security.jps.config" value="${ecsf.jps.config}"/>
    <sysproperty key="javax.net.ssl.trustStore" value="${ecsf.ssl.truststore}"/>
    <env key="IBM_JAVA_OPTIONS" value="-Dibm.stream.nio=TRUE -Djavax.xml.stream.XMLInputFactory=com.ibm.xml.xlxp.api.stax.XMLInputFactoryImpl -Djavax.xml.stream.XMLOutputFactory=com.ibm.xml.xlxp.api.stax.XMLOutputFactoryImpl -Djavax.xml.stream.XMLEventFactory=com.ibm.xml.xlxp.api.stax.XMLEventFactoryImpl"/>
    </java>
    </then>
    <else>
    <java classname="oracle.ecsf.util.ProvisioningUtil" fork="true" classpathref="ecsf.classpath" failonerror="true">
    <arg value="${temp.ecsf.config.file}"/>
    <sysproperty key="oracle.security.jps.config" value="${ecsf.jps.config}"/>
    <sysproperty key="javax.net.ssl.trustStore" value="${ecsf.ssl.truststore}"/>
    </java>
    </else>
    </if>
    We noticed that it is referring to ssl.trustStore which is similar to what you metioned earlier. Do you think this is causing the issue ? If so how can we disable it?
    Regards, Raj.

  • Automatic posting configuration for GR/IR account

    Dear Alll,
    I need some clarification on Automatic posting configuration for GR/IR account. In OBYP, for transaction BNG-Invoiced but not yet delivered we maintain GR/IR clearing account, adjustment account and target account. As per my understanding, adjustment accounts and target accounts are only hit during closing time when GR/IR account has some value and that time it is checked using the transaction F.19 and the amount is posted to adjustment account and target account. Please point out where I'm wrong and provide explanation if I'm loosing on some point
    Warm Regards
    Mazdul

    Hi Jud
    You should make these posting to a cost center then..The only way you can control account postings via PO type is having a account assignement category. You can make this as mandatory filed for this PO type..
    Please let me know if your requirement is different..
    CHeers
    R K Bolla

  • 500 Patch Post Configuration  Steps ODI

    Hi,
    I have applied 500 patch to 11.1.2.2.300 environment.
    I am doing Post Configuration steps
       Import the following projects from odi/11.1.2.2.00/workrep in INSERT_UPDATE mode:
    - PROJ_AIF_File_Project.xml- PROJ_JDE_Adapter_Project.xml
    I have selected Import Project 
    In the select files to import there are no xml to import but readme says we need to import PROJ_AIF_File_Project.xml- PROJ_JDE_Adapter_Project.xml.
    When I am selecting AIF_FILE_PROJECT it is
    We need to select Yes and continue or I am doing wrong.Please help.Is my procedure correct ?

    Hi,
    if you select AIF_FILE_PROJECT only this projects xml files will be copied.
    Basically these files got replaced with patch the .500 patch has put some new files in the place of old one so you just need to Import the project that's it.
    the project name you need to select in that all xml files are present which will be importing.
    Thanks,
    pratik

  • Pre & Post  Configuration of Hyperion Suite

    Dear Guru,
    What are the Pre and Post Configuration of Hyperion Suite?
    Thanks in Advance,
    Sekhar

    Hi,
    I am wondering if you can help me figure out why my EPM Install Tool won't install. I am trying to install on a Linux server using RedHat 5.2
    I have the SystemInstaller-11121-linux64.zip downloaded, and I am trying to run it using ./installTool.sh but it errors.
    Does this have to run from a certain dir or ? Or are there pre-steps that need to occur before it will run?
    ./installTool.sh
    tee: : No such file or directory
    ERROR: File descriptor soft limit is 1024, but must be at least 4096.
    Please increase the soft file descriptor limit and re-run the
    Hyperion Installation Utility (./installTool.sh).
    Thank for the help.
    Ron

  • Automatic Payment Posting Configuration

    Hi Experts
    could some help me in providing configuration steps for automatic payment posting.

    Hi,
    For the confuguration of Automatic posting go to the transaction -FBZP
    here configure the six steps , 1)All company codes,2) Paying company codes, 3) Payment methods in country ,4) payment methods in company codes, 5) Bank determination 6) house banks.
    Hope this will help you
    Regards

  • PI post configuration error

    Doing XI/PI post install configuration. ALL JCO RFC setup done even SLD working but while logging to IR then import s/w component version shows unable to read software component versions from SLD.
    Our team checked everything. Even SLD is running file.
    Please provide clue if anybody faced similar problem.

    Hi,
    Have you imported all cim/CR related design time objects ? Also what is your SLDCHECK output ?
    The following RFCs should be working :-
    AI_RUNTIME_<SID>
    SAPSLDAPI_<SID>
    AI_VALIDATION_<SID>
    LCRSAPRFC_<SID>
    Please refer the following notes :-
    Note 1309239 - Configuration Wizard: PI NetWeaver initial setup
    Note 1117249 - Incomplete Registration of PI components in SLD
    Note 940309 - Change PI default client after NW 7.0 Installation
    Regards

  • MIRO FI-POSTING CONFIGURATION

    Dear Sir,
    During the MIRO , System automatically determine the GLs and post the FI documents . I request you to kindly guide me about the configuration setting for determining the posted GLs .
    I our existing setup , during MIRO incase there is any change in Stock Value then value differnce  is getting posted as "Price Difference GL" . But the Posted GL for "Price Differnce" is comming wrong . We are required to change the GL to the corrected one . Kindly guide me , as what steps are required to define the correct GL please .
    With Thanks and Regards
    B Mittal

    Go to tocde OBYC.
    select the Transaction PRD and in this see the GL accounts that were assigned. Check whether they are the same or not. Then change them accordingly.
    I also suggest you to read the documentation against this tcode in path
    SproMM-Valuation and Account AssignmentAccount DeterminationAccount Determination Without WizardConfigure Automatic Postings
    Read the document before the "configure automatic postings" which is self explanatory.
    reward if useful.
    sarma

  • Lost Enable Prompt access post configuring aaa commands

    Can any one suggest how to login back to enable prompt on my device ?
    I have done the Tacacs Configuration through adding aaa commands &
    As a Post Result, Tacacs is successfully configured & I am able to login with my rsa token
    but Unfortunately I have lost the enable access, unable to enter into privilige mode, However I was able to login to Privilige mode before adding aaa commands
    through admin. Currently Below error is showing on my screen
    SWITCH>en
    Password:
    % Error in authentication

    Which AAA commands did you apply? Did you try the same password as the one for your user that you are logging in with? If there is local enable you could disable access to TACACS to fall back to it and correct the configuration.
    This could be achieved by using ACL to filter TACACS from this device on an upstream host or removing this host temporarily from your ACS/TACACS server so it gets no reply back. It should then fall back to local accounts if you have configured that.
    Daniel Dib
    CCIE #37149
    Please rate helpful posts.

  • How to post/configure revaluation of Fixed Assets

    hello gurus,
    i want step by step customization for revaluating fixed assets.
    regards,
    anand

    Hi,
    For revaluation of asset we have two options available
    1.<b>Indexed Replacement</b><u></u><i></i>:In this case change in value of asset is posted automatically at the time of depreciation posting.In this method we have to define index series.Follow the steps given below
    a. Deifne dep area (OR64) In this step we determine the dep area in which we want to manage revaluation of assets.
    b.Define Index series(OAV5)
    c.Enter index series in asset class or asset master record(as02) for the specific dep area.
    2.<b>Revaluation with Inflation management</b>:<u></u> In this case either we can go for one time revaluation or periodic revaluation.

  • New SDN blog post: Configuring security in STVN2.1 OrgChart

    Hi all,
    I have written a new SDN Blog on configuring security in STVN2.1 OrgChart:
    [/people/luke.marson/blog/2010/09/17/configuring-security-in-stvn21-orgchart|/people/luke.marson/blog/2010/09/17/configuring-security-in-stvn21-orgchart]
    Enjoy!
    Luke

    Hi all,
    I have written a new SDN Blog on configuring security in STVN2.1 OrgChart:
    [/people/luke.marson/blog/2010/09/17/configuring-security-in-stvn21-orgchart|/people/luke.marson/blog/2010/09/17/configuring-security-in-stvn21-orgchart]
    Enjoy!
    Luke

  • Creating a planned order with error "Material requires configuration"

    Dear All,
    I am facing a problem for creation of a planned order with error "Material requires configuration".
    To follow the note 180317, I change Account Assignment Category to "U" (Unknown).
    However, the system still does display the same error.
    Could you please help provide possible solution for this?
    Regards,
    Phong

    See also the following blog post:
    Configurable planned order for material variants: Exception "53: No BOM explosion due to missing configuration"
    BR
    Caetano

Maybe you are looking for