TDMS System Role Problem

Dear experts,
We are configuartion TDMS poilt setup for ERP systems. We plan to use the Solution manager as the TDMS server.
(1) A lot of documents are kindof mixing these the controll system role and central system role together.My question is shall we use one client to play as both the controll system and central system or 2 seperate clients? What is the advantage of seperating these two client?
(2) In TDMS setting up phrase, what communication user and logon user should we prepare in advance for the sender system, controll system, central system and receiver system? Could you provide a user and role list for each system just for the TDMS poilt setup purpose? The security guide is not clear about this.
Thanks a lot for your help!

Hi Claire,
the control and central system can be the same system and same client. This makes live easier for checking and setup.
I suggest using the same user for all systems (receiver, sender, control and central).
A dedicated TDMS role is offered together with the installation.
Hopefully this helps you configuring the setup.
Regards,
Eddy Rombaux

Similar Messages

Troubleshooting System Recovery Problems

A System Recovery is a useful tool to return your Windows 8 tablet back to factory defaults. However, what do you do when the System Recovery isn't working!?
A full System Recovery can be a lengthy process as there is a lot of data being transferred. Patience is the key, as a full Recovery can take two to four hours to complete.
For more information check out HP's Troubleshooting HP System Recovery Problems for Windows 8. This document will help you get your Windows 8 tablet back up and running.
TIP: If you are planning on using the System Recovery make sure that you do not change or delete the HP Recovery Partition as that will make all but impossible to Restore your tablet using the HP Recovery Manager.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Have you created this disc on your own or you use original toshiba disc?
Do you use it for the first time?

Error while trying to set system role.

Hi all,
Me stuck up with an issue. Look at the code below.
RMResource newResource = session.getAuthentication().getGroup("<GroupName>");
RoleAccessor newAccessor =
session.getAuthorization().createRoleAccessor(newResource);
Role file_access_role = session.getAuthorization().getRoleByName("View");
newAccessor.setSystemRole(file_access_role);
If i execute the above code, I am getting the below exception.
com.sqribe.rm.ReportMartException: Not a Non-Adaptive-State System Role: Try setAdaptiveStateRole().
Below given are the Adaptive-State system Roles.
View Only
View and Process
Analyze
Analyze and Process
Query and Analyze
Datamodel and Analyze
If i try to substitute "View" with any 1 of the roles given above also, I face the same issue. Any light on this issue will be of great help.
Regards

After much ado, I contacted Apple and they told me to perform the following steps to deal with the Rights and Pricing dilemma. Choose just one country, then submit book. After everything is accepted, sign in to iTunes Connect, Manage Your Books, choose your title with an incomplete rights/pricing list, then in the upper right hand corner of the page that appears, select the blue button, "Rights and Pricing". There you can add the rest of the countries without a hitch!

Requesting more than 10 system roles in SMSY for one landscape

Hi everyone
We are looking to have the possibility to create more than 10 customer defined system roles in SMSY for one landscape. The current limitation prevents us to fully take advantage of our multi-client landscape designed to accept a dev path and a data load path at the same time as a testing path. For one data load server, we might have up to 9 or 10 different clients being used. This permits us to manage several cycles of data loads at a single time.
Has anyone else ever requested to have more than 10 customer defined system roles per landscape created?
Happy new year and thank for the prompt responses
Nelson Julien
Project manager, Solution Manager

Hi Udo
For our logical component ECC 6.0, here are the items
Configuration (client 020) (client defined)
This is used for configuration
Configuration target (client defined)
This is used as a target for transport groups
Development system (SAP delivered)
This is used for ABAP work
Development Target (client defiened)
This is used as a target for transport groups
Development UTC (client 040) (client defiened)
This is used for unit test work from the 020 and 030 clients
Object repository (D01 030) (client defiened)
This is used to store development objects, we relocate object ownership from here and to here once work has gone to production
QI1-320 / HRQ-130 / HRQ-141 (client defiened)
This regroups clients from our R/3 logical componant (QI1-320) used for initial tests, our ECC 6.0 logical componant (HRQ-130) also used for initial testing and our ECC 6.0 data load logical componant (HRQ-141) used for the data initial testing
Evaluation system (SAP delivered)
This is for the sandbox
Quality assurance system (SAP delivered)
This is used for the initial testing
CI4-320 / HRQ-132 / HRQ142 (client defiened)
This regroups clients from our R/3 logical componant (QI1-320) used for integration tests, our ECC 6.0 logical componant (HRQ-130) also used for integration testing and our ECC 6.0 data load logical componant (HRQ-141) used for the data integration testing
Production system (SAP delivered)
well, you know...
Training system (SAP delivered)
This is used for training
Dev security (client 900) (client defiened)
This is used for security work
Security target (client defiened)
This is used as a target for transport groups
Dataload 1 (HRQ 140) (client defiened)
Initial client for data loads
SAP reference system (SAP delivered)
This is the reference system for this landscape
In the future, we are looking to add to these in order to accomodate projects and production support.
Thank you
Nelson Julien
Project Manager, Solution Manager

"Add Site System Role" is greyed out in the SCCM console

SCCM 2012 R2 CU3
Single Primary Site
Issue where “Add Site System Role” is greyed out in the SCCM console. We can install roles through PowerShell, however in the console we cannot add roles, remove roles, or change the properties of the site server.
The account we are using is full administrator in SCCM. It was used to install sccm infrastructure.
Any suggestions

Anything related to these?
https://social.technet.microsoft.com/Forums/en-US/4226f698-1114-4a62-bc25-705788432955/add-site-system-roles-remove-roles-greyed-out?forum=configmanagergeneral
https://social.technet.microsoft.com/Forums/en-US/76bb0064-9d5a-4b0e-b955-472fb5e9e833/the-add-site-system-role-is-grey-out-after-deleted-the-cloud-distribution-point?forum=configmanagerdeployment#5347193f-997b-41a6-8011-5320e3dd8a9e

Site System Roles - Best Practices

Hi all -
I was wondering if there wwere any best practice recommendations for how to configure Site System Roles? We had a vendor come onsite and setup our environment and without going into a lot of detail on why, I wasn't able to work with the vendor. I am trying
to understand why they did certain things after the fact.
For scoping purposes we have about 12,000 clients, and this how our environment was setup:
SERVERA - Site Server, Management Point
SERVERB - Management Point, Software Update Point
SERVERC - Asset Intelligence Synchronization Point, Application Catalog Web Service Point, Application Catalog Website Point, Fallback Status Point, Software Update Point
SERVERD - Distribution Point (we will add more DPs later)
SERVERE - Distribution Point (we will add more DPs later)
SERVERF - Reporting Services Point
The rest is dedicated to our SQL cluster.
I was wondering if this seems like a good setup, and had a few specific questions:
Our Site Server is also a Management Point. We have a second Management Point as well, but I was curious if that was best practice?
Should our Fallback Status Point be a Distribution Point?
I really appreciate any help on this.

The FSP role has nothing to do with the 'Allow
fallback source location for content' on the DP.
http://technet.microsoft.com/en-us/library/gg681976.aspx
http://blogs.technet.com/b/cmpfekevin/archive/2013/03/05/what-is-fallback-and-what-does-it-mean.aspx
Benoit Lecours | Blog: System Center Dudes

System role change in Sol Man

Dear friends,
I am working with Solution Manger 4.0. In Solar01, in top menu option, under "Business Blueprint", we are having option to change the "System role".
I wants to restrict this option based on the user ID. Because, now everybody logins to different systems (means DEV,QA,PRD) by changing the system role.
How to restrict this option?
Thanks
Senthil

Hello Sentil,
The functionality you are looking for is not available.
However, you may consider the following to achieve a similar result:
In SOLAR_PROJECT_ADMIN of the respective project, tab System Landscape, sub tab Systems there is a button calls System Landscape Assignment via which you can project specifically hide certain system roles. So for instance if during business blueprinting you only need the evaluation and development systems, you can hide the system roles which are not required at that point of time, such as QA and PRD. The result: Project team members working on SOLAR01 and SOLAR02 for instance can only see the roles which have been defined in SOLAR_PROJECT_ADMIN.
At a later project stage you can then add QA and PRD if required simply by adding the respective system roles again. The information on system-clients assigned is simply retrieved from the system landscape maintenance (SMSY transaction), where this information still resides.
So this might be an alternative to your suggestion (system roles based on user ID) because in this way you have control of offering system roles and, thus, the respective systems project-phase-dependently.
Best regards,
Doreen

Additional system roles in SOLAR01/SOLAR02

Hello,
Is it possible by customizing or something else, to have more than the Dev/Qas/Prod system roles selectible in SOLAR01 and SOLAR02 ?
I have logical components where there are other types of systems, and I would like to use them in my Blueprint/Configuration.
Thanks.
Thomas

Goto SMSY
Goto Project Landscape
select your project
now you see your logical components for your project, in here you can add via system role assigment other system roles like evaluations, demo, sap referecen etc... if you want more than available here, click on "Systm Roles" in the System Role Assigment and you can add your customer Roles
once you did that, this will be visible in solar02 / system-role
Edited by: Nesimi Buelbuel on Jun 12, 2009 10:51 AM
Edited by: Nesimi Buelbuel on Jun 12, 2009 10:52 AM

SCCM and ForeFront Endpoint Protection point site system role

Thanks for looking at this......I am working with SCCM 2012, and ForeFront Endpoint Protection has been set up as an Endpoint Protection point site system role. Up to now we just haven't had to mess with it much, it just has worked. I
have been busy packaging applications for the eager public. I have one pc that has had the Endpoint client self destruct. Had to remove it via the control panel. I next did a machine policy retrieval and evaluation cycle (among others) and sccm
shows that it is aware that this particular machine needs FEP. It lists it as "To Be Installed". How long will this take? I have things set for "as soon as possible". Am I at the mercy of Sccm? Also, is there
a way to force the install? Thanks for any light you can shed on this!

This will depend on your SCCM client policy settings to allow SCEP installation outside of maintenance windows (if you have any).
It will also depend if you are using 2 hour deployment "randomizer" option in your SCCM client policy.
Lastly, you can install it with BITS that have already been downloaded with SCCM client install.
c:\windows\ccmsetup\scepintall.exe

System startup Problem grey screen is going regularly and automatically shutdown

Hi
kindly resolve us this problem urgently
error msg. :- System startup Problem grey screen is going regularly and automatically shutdown
thanks
Dhaval Oza

Use RECOVERY MODE.
Boot from another drive with a copy of OS X too is always good.
A Safe Boot at a minimum.

SCCM R2 CAS Missing "Add Site Systems Role" menu

Working with SCCM R2 in a lab environment and I'm Stumped. I expanded my primary site into a hierarchy and on the new CAS I don't have the add site systems role menu when connected to the CAS.
This is what I see when connected to the primary site:
This is what I see when connected to the CAS:
Logged on as the domain administrator account used to install both roles, full administrator on both sites. I can't find any documentation that this is a designed change.
Any Ideas?

At this point that's not relevant, I'm not even getting the menu item to start the wizard. I'm logged in with the account that did the installation yet it's almost like I have view-only permissions. I'm beginning to think there's a trust issue between
my systems so I'm starting over (i.e. applying the snapshots before I installed) and resetting the trust for my CAS system.

Add Site System Roles (Management Point)

To resolve an issue I was having with the management point role I have removed it.
I left it for an hour and then restarted the server and the role had been removed. When I tried to re-add the role the option is greyed out. I believe this is due to the Server being the primary site but am finding it hard to get any definitive answer on
how to re-add the role.
Currently my site has no management point.
My question is HOW DO I RE-ADD THE ROLE OF "MANAGEMENT POINT"?
Will the configuration management setup wizard allow me to do this, whilst retaining the current roles and config?

I thought it was a permissions issue at first to. Signed into the server with the service account used to install SCCM and also explicitly named my domain account as a local admin despite me being a domain admin. Furthermore, I have access to remove the
roles from the server and permission to add and remove roles to all other servers.
Adding role
In management console Administration>Site Configuration>Servers and Site System Roles
This bring up the list of servers and when left clicked their roles. I right click on the server in question and the option to "add site system roles" is greyed out as are the sub-options under start and the option to delete.
Will screen shot in the morning

SCCM Site System Roles - Installation/Configuration chronological order

Hello folks,
I have been reading quite a few documents in order to expertise my SCCM knowledge. I wonder is there any best practice that we need to follow while implementing the Site System Roles.. Like 1. SUP, 2. MP, 3. DP? and what makes the difference in doing so?
Thanks,

This cannot be answered in a single forums thread because there are too many factors involved (business needs, customer's environment, LAN/WAN setup, budget etc). Adding multiple roles will provide load balancing (kind of) and high availability (also
kind of).
Torsten Meringer | http://www.mssccmfaq.de

Judging System Performance ... (was System Overload Problem...)

In a previous thread (was System Overload Problem...) ... I encountered system overload errors as described, while the system performance monitor showed almost no usage for either the disk I/O or the audio monitors.
I was just using some audio Instruments and a few plug-in's ( as was listed in the previous thread) ...
Question: So, and I missing something, or - how can we actually judge the system performance related to actual CPU usage? It seems as though there should be a third column ...
- 1 for disk I/O
- 1 for audio
- 1 for CPU
I would appreciate any insights on this matter.

If you do a search for '10010' (also other 1001x errors) or 'error' you'll find plenty of threads of people with the same errors without good reason for the error's description-sometimes it is a driver conflict but the error returned is system overload. These errors are not always indicative of what actually caused the problem.
http://discussions.apple.com/thread.jspa?messageID=765043&#765043
http://discussions.apple.com/thread.jspa?messageID=766671&#766671
http://discussions.apple.com/thread.jspa?messageID=762124&#762124
And there are many little prefs, processes or actions which may trigger it. Many of them go unresolved.

System Overload problem, Cant make sense of help I've been given

Hey guys, I picked up a cheap version of Logic through my school just over two years ago. I've always used its most simplistic functions for making rough recordings of my band, but over the last 6 months I've been getting into production a lot more. As I got more into using MIDI and Plugins, my system overload problem got worse and worse. Its now at the point where I get an overload literally every two bars of music. Through this support page http://support.apple.com/kb/HT3161 I worked out my problem is that one core of my processor is having to do literally everything.
My knowledge of logics functions is not indepth in the slightest, and I absolutely cannot make sense of the instructions on this page. I dont have an Output 1-2 track, or an Aux 1 / Aux 2 track in my mixer. Moreover I just can't work out what this page is trying to tell me to do to balance the activity between cores.
If anyone could break the process down into a really simple, laymans terms step by step of what I do, I'd be extremely greatful. Sorry to sound dense but I really have no clue what that support page is telling me to do ha
Cheers!
PS running on a 2.4Ghz Core 2 Duo, 2GB RAM, plenty of Hard Disk space free.

It'll make a bit more sense when you realise that the aux tracks will apear automatically in the mix window once you send something to an aux via a channel.

TDMS System Role Problem

Similar Messages

Maybe you are looking for