TDMS unable to open directory or ftp

I am using a cRIO 9113 chassis with a 9025 CPU mod. The system is also using 9239 DAQ modules. My Labview software is writing TDMS files to the c:\TDMSData directory on the cRIO. I have tried using a Labview webdav application, command line ftp windows, command line ftp linux and Windows Filezilla to get the files but the connection disconnects when I try to enter the directory and either list the files or download a file. If I use the cRIO web page and go to the files menu, I get a fatal error. I have attached the error. Does anyone know what may be causing this problem and/or how to resolve the problem?
Attachments:
crio error.jpg ‏41 KB

Do you happen to know (or can you estimate) how many files you have created in your TDMSData Subdirectory?
From my experience VxWorks tends to "time-out" on a directory listing if the directory contains a few hundred (700 or more) files. At least that would explain your ftp errors, as a directory change usually also includes a list file commando.
Regards, Jens

Similar Messages

Open Directory: "Unable to load replica list"

I'm currently running Mavericks Server 3.1 on my Mac Mini at the home network. I had some issues with the client logins and went for local accounts on the clients instead. Today I finally wanted to fix the problem and go all Open Directory. But the Open Directory service was shut off when I opened the server software. I tried to turn it on but got a message saying "Unable to load replica list". I updated the software to the latest 3.1 but are still having the same issue. I never had any replica list, I only had a standard one from the start, but it seems I can't do anyhing there now.
LDAP log:
Mar 21 22:48:38 xxYY.com slapd[172]: @(#) $OpenLDAP: slapd 2.4.28 (Nov 12 2013 12:02:47) $
[email protected]:/private/var/tmp/OpenLDAP/OpenLDAP-491.1~1/servers/slapd
Mar 21 22:48:38 xxYY.com.com slapd[172]: daemon: SLAP_SOCK_INIT: dtblsize=8192
Mar 21 22:48:39 xxYY.com.com slapd[172]: TLS: found identity in keychain using identity preference.
Mar 21 22:48:42 xxYY.com.com slapd[172]: slap_add_listener: opened additional listener 'ldaps:///'
Mar 21 22:48:42 xxYY.com.com slapd[172]: bdb_monitor_db_open: monitoring disabled; configure monitor database to enable
Mar 21 22:48:44 xxYY.com.com slapd[172]: slapd starting
Mar 21 22:48:44 xxYY.com.com slapd[172]: daemon: posting com.apple.slapd.startup notification
Mar 21 22:48:54 xxYY.com.com slapd[172]: => bdb_idl_delete_key: c_del id failed: DB_LOCK_DEADLOCK: Locker killed to resolve a deadlock (-30994)
Mar 21 22:48:54 xxYY.com.com slapd[172]: conn=1022 op=3: attribute "entryCSN" index delete failure
Mar 21 22:50:02 xxYY.com.com slapd[172]: => bdb_idl_delete_key: c_get failed: DB_LOCK_DEADLOCK: Locker killed to resolve a deadlock (-30994)
Mar 21 22:50:02 xxYY.com.com slapd[172]: conn=1042 op=3: attribute "entryCSN" index delete failure
I don't understand any of this other than the obvious failure words. Can anyone understand this and help me here?

This procedure is a diagnostic test. It makes no changes to your data. If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
Please triple-click anywhere in the line below on this page to select it:
sudo /usr/libexec/slapd -Tt | pbcopy
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. You'll be prompted for your login password. Nothing will be displayed when you type it. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. You don't need to post the warning.
If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
Wait for a new line ending in a dollar sign ($) to appear below what you entered.
The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
The Terminal window doesn't show the output. Please don't copy anything from there.

TS2570 Still cant access my computer, followed instructions to perform a safe boot and last line of script it shows: BootCacheControl: Unable to open /Var/db/BootCache.playlist:2 No such file or directory. Any idea?

Brand new Mac Book Pro
Purchased in Mexico's Department store Liverpool on June 20th 2012
Purchased Memory upgade to 8Gb, on june 27th, at Apple Store Memorial City, Houston
Upgraded memory from 4Gb to 8Gb on June 28th.
Tried to write on my external HD (previously written on a windows based PC) with no success.
Upon reccomendation from a Mac assistant, copied all my external HD contents into my Mac Hard drive.
Then formatted my external HD and copied back all my information to it.
deleted all the information from my MacBook Pro HD.
Attempted to repeat the same operation with another external HD, but got a message saying there was not enough epace on the computer HD (even though I have a 750Gb Hard Drive.
Looked in the trash bin and there it was, all the information previously deleted..
Could not empty the trash bin, although I got a message asking me to safely delete all the information from the trash bin,
Could not get enough space released, after several attpempts the trash bin was finally emptied.
All happy getting acquainted with my new MacBook Pro. Two days later, got a gray screen and not able to start the computer.
Looking in to Mac support I found article http://support.apple.com/kb/TS2570 and followed instructions to perform a safe boot:
"Perform a Safe Boot
Simply performing the Safe Boot may resolve this issue.
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Start your Mac, then immediately hold the Shift key. This performs a Safe Boot. Advanced tip: If you want to
see the status of a Safe Boot as it progresses, you can hold Shift-Command-V during start up (instead of just Shift).
Note: A Safe Boot takes longer than a typical start up because it includes a disk check and other operations.
The following is the script that appears on the screen upon safe boot. and halt after the last line.
AppleACPICPU:Processor Id=6 LocalAplicId=255 Disabled
AppleACPICPU:Processor Id=7 LocalAplicId=255 Disabled
AppleACPICPU:Processor Id=8 LocalAplicId=255 Disabled
calling mpo_policy_init for TMSafetyNet
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
calling mpo_policy_init for Sandbox
Security policy loaded: Seatbelt sandbox policy (Sandbox)
calling mpo_policy_init for Quarantine
Security policy loaded: Quarantine Policy (Quarantine)
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California. All Rights Reserved.
MAC Framework Succesfully initializad
using 16384 buffer headers and 10240 cluster IO buffer headers
IOAPIC: Version 0x20 Vextors 64:87
ACPI: System State [SO S3 S4 S5] (S3)
PFM64 (36cpu) 0xf10000000, 0xf0000000
Aplconsole relocated to 0xf1000000
PCI configuration changed (bridge=16 device=4 cardbus=0)
[ PCI configuration end, bridges 12 devices 16 ]
Firewire (OHCI) Lucent ID 5901 built-in now active, GUID 3c0754fffe9b2aa2; max speed s800.
Pthread support ABORTS when sync kernel primitives misused
com.apple.AppleFSCompressionTypeZlib kmod start
com.apple.AppleFSCompressionTypeDataless kmod start
com.apple.AppleFSCompressionTypeZlib load succeeded
com.apple.AppleFSCompressionTypeDateless load succeeded
AppleIntelCPUPowerManagementClient: ready
BTCOEXIST off
wl0: Broadcom BCM4331 802.11 Wireless controller
5.100.98.75
AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitializad
rooting via boot-uuid from /chosen: 6E918706-FC0D-37460-A3A0-6268A51DF93B
Waiting on <dict ID="0"><key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleAPIPCI/SATA@1F,2/AppleIntelPchSe riesAHCI/PRT0@0/AOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlock
storageevice /IoBlockStorageDriver/TOSHIBA MK7559GSXF Media/IOGUIDPartit
BSD root: disk0s2, major 14, minor 2
Kernel is LP64
com.apple.launchd 1   com.apple.launchd 1   *** launchd[1] has started up. ***
com.apple.launchd 1   com.apple.launchd 1   *** Verbose boot, will log to /dev/console. ***
Running fsck on the boot volume...
** /dev/rdisk0s2 (NO WRITE)
** Root file system
   Executing FSCK_HFS (version diskdev_cmds-540.1~25).
BootCacheControl: UNable to open /Var/db/BootCache.playlist:2 No such file or directory
launchctl:Dubious permissions on file (skipping): /Library/LaunchDaemons
launchctl:Dubious permissions on file (skipping): /System/Library/LaunchDaemons
Any help or suggestions on what to do next would be welcomed.
I am in the middle of the Atlantick, stuck with a brand new, non working Apple MacBook Pro.
Best regards
Sergio Ramos

Reinstalling MacOS does NOT fix the problem for me. I'm still searching a solution !
Bernard

Unable to open desktop file /usr/share/applications/redhat-email.desktop for panel launcher: No such file or directory

Dear Experts,
Please note that I am facing a chllenge while confiuguring the VNCServer on the local test Server. The Local Test Sver OS Version is Redhat Enterprise Linux Server
Release 5.5 32-bit. Please review the following error message and advise me on how to fix the vncserver issue.
[root@test .vnc]# cat xstartup
#!/bin/sh
# Uncomment the following two lines for normal desktop:
unset SESSION_MANAGER
exec /etc/X11/xinit/xinitrc
gnome-session &
[ -x /etc/vnc/xstartup ] && exec /etc/vnc/xstartup
[ -r $HOME/.Xresources ] && xrdb $HOME/.Xresources
xsetroot -solid grey
vncconfig -iconic &
#xterm -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" &
twm &
[root@test .vnc]# cat /etc/sysconfig/vncservers
# The VNCSERVERS variable is a list of display:user pairs.
# Uncomment the lines below to start a VNC server on display :2
# as my 'myusername' (adjust this to your own). You will also
# need to set a VNC password; run 'man vncpasswd' to see how
# to do that.
# DO NOT RUN THIS SERVICE if your local area network is
# untrusted! For a secure way of using VNC, see
# <URL:http://www.uk.research.att.com/archive/vnc/sshvnc.html>.
# Use "-nolisten tcp" to prevent X connections to your VNC server via TCP.
# Use "-nohttpd" to prevent web-based VNC clients connecting.
# Use "-localhost" to prevent remote VNC clients connecting except when
# doing so through a secure tunnel. See the "-via" option in the
# `man vncviewer' manual page.
# VNCSERVERS="2:myusername"
# VNCSERVERARGS[2]="-geometry 800x600 -nolisten tcp -nohttpd -localhost"
VNCSERVERS="1:oracle"
[root@test .vnc]# ls
passwd test.oracle.co.zm:1.pid test.oracle.co.zm:3.log test.oracle.co.zm:5.pid test.oracle.co.zm:6.pid
test.oracle.co.zm:1.log test.oracle.co.zm:2.log test.oracle.co.zm:5.log test.oracle.co.zm:6.log xstartup
[root@test .vnc]# more test.oracle.co.zm:1.log
Xvnc Free Edition 4.1.2
Copyright (C) 2002-2005 RealVNC Ltd.
See http://www.realvnc.com for information on VNC.
Underlying X server release 70101000, The X.Org Foundation
Tue Mar 11 11:18:37 2014
vncext:      VNC extension running!
vncext:      Listening for VNC connections on port 5901
vncext:      Listening for HTTP connections on port 5801
vncext:      created VNC server for screen 0
Could not init font path element unix/:7100, removing from list!
localuser:root being added to access control list
No profile for user 'root' found
SESSION_MANAGER=local/test.oracle.co.zm:/tmp/.ICE-unix/13603
Window manager warning: Log level 32: could not find XKB extension.
** (eggcups:13671): WARNING **: IPP request failed with status 1030
** (eggcups:13671): WARNING **: IPP request failed with status 1030
** (nm-applet:13697): WARNING **: No connections defined
Initializing nautilus-open-terminal extension
Unable to open desktop file /usr/share/applications/redhat-email.desktop for panel launcher: No such file or directory
Unable to open desktop file /usr/share/applications/openoffice.org-1.9-writer.desktop for panel launcher: No such file or directory
Unable to open desktop file /usr/share/applications/openoffice.org-1.9-impress.desktop for panel launcher: No such file or directory
Unable to open desktop file /usr/share/applications/openoffice.org-1.9-calc.desktop for panel launcher: No such file or directory
[root@test .vnc]#
Regards
Mohammed Abdul Muqeet

Hi,
Try these 3 solutions
1. Did you start vncserver services as:
service vncserver start
2.Check that port 5901 has not been blocked by a firewall:
# nc -vz localhost 5901
You should get a connection and a termination. If you get an error, fix the firewall.
3. service iptables stop
Hope This Helps
Regards,
-DK

Open directory unable to start up after crash

Hi everyone,
Our OS X Server 10.8.4 crashed. After booting up again open directory doesn't want to start up so LDAP isn't running which means nobody can access their mails or do anything.
When trying to start the Open Directory service in the "Server" app it just says "Unable to load replica list"
Looking at the Open Directory Log after trying to switch it on this is what I get :
2013-06-28 15:22:53.830872 SAST - 43.7184, Module: AppleODClientLDAP - unable to create LDAP connection context - no server specified
2013-06-28 15:22:53.830888 SAST - 43.7184 - Client: opendirectoryd, UID: 0, EUID: 0, GID: 0, EGID: 0
2013-06-28 15:22:53.830888 SAST - 43.7184, Module: AppleODClientLDAP - unable to open connection to LDAP server - unable to create connection context
2013-06-28 15:23:23.832473 SAST - 43.7189 - Client: opendirectoryd, UID: 0, EUID: 0, GID: 0, EGID: 0
2013-06-28 15:23:23.832473 SAST - 43.7189, Module: AppleODClientLDAP - unable to create LDAP connection context - no server specified
2013-06-28 15:23:23.832488 SAST - 43.7189 - Client: opendirectoryd, UID: 0, EUID: 0, GID: 0, EGID: 0
2013-06-28 15:23:23.832488 SAST - 43.7189, Module: AppleODClientLDAP - unable to open connection to LDAP server - unable to create connection context
Does anyone have any advice on how to get it up and running again? I'd hate to lose all my users emails and do the server over. I have a time machine backup of a week ago as well which I guess is the second-to-last resort to restore the entire server from there?
Please help, I'm desperate here
Thanks
J

I was able to restore the existing server with the automatic OD backup that Server.app creates. When my OD fails to start after a crash and db_recover commands don't work, it's always worked for me to restore the odmaster from a backup using the command:
sudo slapconfig -restoredb /private/var/backups/ServerBackup_OpenDirectoryMaster.sparseimage
I'm careful to keep an independent OD backup with Carbon Copy Cloner and this preflight script.
You can also grab an earlier version of the sparse image ServerBackup_OpenDirectoryMaster.sparseimage from a Time Machine backup. It's also possible to rsync the database files directory from a Time Machine backup.

Unable to open Mail. Home directory is full.

Suddenly I can no longer open my Mail program. The error message I am confronted with is:
"Mail cannot update your mailboxes because your home directory is full.
You must free up space in your home folder before using Mail. Delete unneded documents or move documents to another volume."
I have gone in to my home folder and deleted a ton of stuff. But I am still unable to open my Mail application.
Any assistance would be much appreciated.

What is your hard drive capacity and available free space after deleting a ton of stuff?
Try the following.
With the Mail.app quit and using the Finder, go to Home > Library > Mail > Envelope Index.
Move the Envelope Index file to the Desktop.
When re-launching Mail, you will be prompted to import all mailboxes located within the Mail folder at Home > Library > Mail. Select OK and allow the import process to complete.
After confirming all mailboxes were successfully imported, you can delete the old Envelope Index file from the Desktop and this should resolve the problem.

Help: upon safe boot, got following message: BootCacheControl: Unable to open /Var/db/BootCache.playlist:2 No such file or directory

Mac Book Pro, late 2011. Purchased in a department store in Mexico.
Was running ok for several days after I purchased it.
Had some software installed and memory upgraded from 4 to 8Gb.
Suddenly at start up, got a gray screen with a spinning wheel and never boot.
Followed advise from http://support.apple.com/kb/TS2570 and performed a safe boot. (hold Shift-Command-V during startup instead of just Shift).
The boot sequence starts then stops and nothing happens. these are the last lines of the boot sequence.
BSD root: disk0s2, major 14, minor 2
Kernel is LP64
com.apple.launchd 1   com.apple.launchd 1   *** launchd[1] has started up. ***
com.apple.launchd 1   com.apple.launchd 1   *** Verbose boot, will log to /dev/console. ***
Running fsck on the boot volume...
** /dev/rdisk0s2 (NO WRITE)
** Root file system
   Executing FSCK_HFS (version diskdev_cmds-540.1~25).
BootCacheControl: Unable to open /Var/db/BootCache.playlist:2 No such file or directory
launchctl:Dubious permissions on file (skipping): /Library/LaunchDaemons
launchctl:Dubious permissions on file (skipping): /System/Library/LaunchDaemons
For what little experience I have on Unix systems, it has to do with the libraries which cannot be launched...
Any ideas, solutions, suggestions are welcomed.
Cheers.
Dipbaja

Boot into Recovery (command-R at startup), launch Disk Utility, select your startup volume, and run Repair Permissions. Then reboot as usual.

TS2570 On start up of my new iMac it locks on the grey screen with the apple logo and the progress wheel spins. Boot up in safe and this is where it stopped at "BootCacheControl: Unable to open /var/db/bootcache.playlist: 2 no such file or directory. "

On start up of my new iMac it locks on the grey screen with the apple logo and the progress wheel spins. Boot up in safe and this is where it stopped at "BootCacheControl: Unable to open /var/db/bootcache.playlist: 2 no such file or directory. "

Reinstalling MacOS does NOT fix the problem for me. I'm still searching a solution !
Bernard

File server for school LAN--unable to get Open Directory working right

I've been following the tutorials on wazmac.com for configuring an OSX 10.6 server for local network file sharing.
Server IP address is 192.168.1.99.
FQDN is oltserver.ourladyoftepeyac
AFP, DNS, and Open Directory are configured, supposedly correctly.
What works:
Resolving the domain name to the server's IP address and vice-versa on Network Utility Lookup while on the server.
On client computers, under Accounts, I can bind to the IP address and I can bind to "oltserver.local".
After binding and restarting, I get a logon screen that shows the available users I have created in Workgroup Manager.
What doesn't work:
Cannot resolve the domain name to the server's IP address and vice-versa on Network Utility Lookup while on client machines.
On client computers, under Accounts, I cannot bind to the FQDN, oltserver.ourladyoftepeyac. Error: Could not resolve the address (2200).
When trying to log on to a network account from a client, it fails. "Cannot log in because an error occurred."
There must be a problem with the settings for my DNS service. But unfortunately the wazmac guide doesn't give a lot of troubleshooting advice.
Any help would be appreciated. Here are bunches of settings screenshots.

That's terrific! I am almost there.
What I did:
I followed your advice on the domain name and renamed it ourladyoftepeyac.lan. Screenshot.
Then (what probably made a big difference), I went into the network settings for the client Macs and removed their incorrect manual settings for DNS servers. This gave them the correct DNS servers! Screenshot.
This allowed the Network Utility on client machines to correctly resolve the server's IP address with the domain name! Screenshot.
Aaaaand it solved the problem with previously being unable to bind the client mac to the Open Directory server. Screenshot.
But:
After all of that, the clients still aren't logging in. So disappointing. It's unbelievable how unhelpful the error message is, too. "Logging in to the account failed because an error occurred."
I can't understand why this is. AFP is active and set to allow guests to log in. Unfortunately, with all the help you've given, I don't have any clues left as to why the clients aren't logging on.

After rebooting ML server, unable to open active directory. Error msg is Unable to open requested node error -14006.

This active directory is a replica of master on 2nd Mac Mini server which still thinks replica is there (perhaps it is) and will not let us delete in order to recreate. Both servers are running 10.8.4. Nothing changed on either server, simply did a reboot. When we logged in, Active Directory was turned off and when trying to turn on or access received message "Unable to open the requested node. The node LDAPV3/127.0.0.1 could not be opened because of an unexpected error -14006".
Does any one have experience with this and how can we recover? Thanks in advance for your help.

Hi again,
I've been able to run Reports by changing the "Reports_Tmp" key in the Registry under:
Hkey_local_machine\software\oracle\home0\
to the D:\ drive

Unable to set Open Directory master on brand new server

I have a brand new Mac Mini server running 10.6.2 which I am unable to set as an OD master, receiving the error "There was a configuration error when configuring your server as an Open Directory Master. See the Configuration Log for more information about the failure."
The log reads as follows...
2010-01-10 10:34:31 +1100 - slapconfig -createldapmasterandadmin
2010-01-10 10:34:31 +1100 - Creating password server slot
2010-01-10 10:34:31 +1100 - command: /usr/sbin/mkpassdb -a -u diradmin -p -q
2010-01-10 10:34:32 +1100 - command: /usr/sbin/mkpassdb -a -u root -p -q
2010-01-10 10:34:32 +1100 - command: /usr/sbin/mkpassdb -a -u paisleypark.local$ -p -q
2010-01-10 10:34:32 +1100 - command: /usr/sbin/mkpassdb -setcomputeraccount 0x4b4912886b8b45670000001b0000001b
2010-01-10 10:34:32 +1100 - Setting SASL realm to <OpenDirectory.pIxrV9>
2010-01-10 10:34:32 +1100 - command: /usr/sbin/mkpassdb -setrealm OpenDirectory.pIxrV9
2010-01-10 10:34:32 +1100 - Copied file from /etc/openldap/slapd.conf to /etc/openldap/slapd.conf.backup.
2010-01-10 10:34:34 +1100 - command: /usr/bin/net getlocalsid
2010-01-10 10:34:34 +1100 - Removed file at path /var/db/openldap/openldap-data/DB_CONFIG.
2010-01-10 10:34:34 +1100 - Starting LDAP server (slapd)
2010-01-10 10:34:54 +1100 - Error: The slapd process did not start.
2010-01-10 10:34:54 +1100 - Stopping LDAP server (slapd)
2010-01-10 10:34:54 +1100 - Removed file at path /var/run/slapconfig.lock.
... but I am unable to locate any reference to the specific error in these forums or via my friendly neighbourhood Google.
Any ideas greatly appreciated.

Well, like I mentioned, if DNS is not properly configured, all bets are off. And again, if you start services before making it an OD master, you could be asking for trouble. You may be able to fix the installation, but I'd seriously consider starting over.
You might be able to fix what you have well enough to make it work, but what happens in 6 months when it gets flaky about something. You may end up wondering of there was something wrong to begin with.
So yes, I'd start over.

Can't log in to Lion Server. Open Directory Log Message says: unable to connect to password server

I am setting up Lion Server. I can't log in to Lion Server from client.
Checking the Open Directory Log: says: "unable to connect to password server" or
"3394.14268, Node: /LDAPv3/127.0.0.1, Module: AppleODClient - unable to read Password Server response - connection to Password Server was closed, socket fd 18 (5205)"
Thanks for help with this.

I never discovered the problem, and instead rebuilt the server from the ground up. I followed instructions at this discussion thread. Very helpful.
How To Install A (Almost) Working Lion Server With Profile Management/SSL/OD/Mail/iCal/Address Book/VNC/Web/etc.
I have had some log-in problems with users. I have found that restarting the server helps. If this doesn't work, I rebuild permissions on the server, followed by opening up Workgroup Manager, go to the user's password, click on options and require that the user change password on the next log-in. For some reason, this will usually fix the problem. I then log in as the user, and "change" the password to the original one. Also note, that if you import a user, the password is not brought in. You must enter it for each user that you imported. Even so, I have often had to resort to the re-set password procedure to enable a log-in.

"Unable to open driver directory"

I have an HP OfficeJet G85xi AIO. I have been using the HP G731IN.dmg driver package, but found that if I had not used the printer for a while (using a laser for day-to-day cost control) that the printer would not function. I had to do a full re-install of the HP driver and its attendant load of undesirable ancillary software. I wanted to drop the HP driver and restore full functionality (scan to and through the computer, fax, print) and understood that the hpijs driver would accomplish this. I installed the 3.9.2 package, along with GPL Ghostscript, Foomatic-RIP, and, for good measure, the Gutenprint 5.2.4 package. I can choose the exact driver for my machine, but when I attempt to print, I get this message in the CUPS error log:[cups-driverd] Unable to open driver directory "/usr/libexec/cups/driver": No such file or directory. I have attempted numerous uninstall-re-installs, resetting the print system, installing from a test account, all to no avail. Any suggestion will be appreciated.

Very strange. That is the first time I have seen that message. Even if the 'driver' directory was missing, the installation of the Gutenprint driver should have created it as Gutenprint installs a driver there. You must have used the hpijs driver when setting up your printer. The Gutenprint driver for your G85 would not be available as the Gutenprint driver file in the /usr/libexec/cups/driver directory would be needed to create that printer.
I suppose the first thing to try is to manually create the directory that cups-driverd wants. Open the Terminal (/Applications/Utilities) and copy and paste the following command into the window:
<pre style="overflow: auto;font-size:small; font-family: Monaco, 'Courier New', Courier, monospace; color: #222; background: #ddd; padding: .3em .8em .3em .8em; font-size: 9px;">sudo mkdir /usr/libexec/cups/driver</pre>
Hit the Return or Enter key. You will be prompted to enter your password. You will notice that nothing appears on the screen as you type in your password. This is normal. After you enter your password, hit Return or Enter again. That should create the directory. If you do not get any error messages, then copy and paste the next command into the Terminal window:
<pre style="overflow: auto;font-size:small; font-family: Monaco, 'Courier New', Courier, monospace; color: #222; background: #ddd; padding: .3em .8em .3em .8em; font-size: 9px;">sudo chown root:wheel /usr/libexec/cups/driver
sudo chmod 755 /usr/libexec/cups/driver</pre>
Hit the Return or Enter key after each command.
Does that get rid of the error message?
Despite what you were told, neither the hpijs or the Gutenprint drivers support scanners. They are printer drivers only. If you want software other than that provided by HP for your scanner, you may want to try VueScan shareware at http://www.hamrick.com/.
Matt

Fatal error: No such file or directory: Unable to open VLDC instance

Hi,
Been researching this one for a few days and seems no one has an answer that works. I've been through over 200 pages and couldn't find the answer.
Environment:
Server: Blade 6000 -- T6300 blade module
OS: Solaris 10 05/08
T6300 ALOM version:
System Firmware 6.3.6 Sun Blade[TM] T6300 2007/03/23 12:45
Host flash versions:
Hypervisor 1.3.3 2007/03/23 12:28
OBP 4.25.3 2007/03/02 20:24
Sun Blade T6300 Server Module POST 4.25.3 2007/03/02 20:53
LDOMs Manager: 1.0.3
The following entry shows up in my log file:
[ Sep 5 16:29:26 Method "start" exited with status 1 ]
[ Sep 5 16:29:26 Executing start method ("/opt/SUNWldm/bin/ldmd_start") ]
Added to channel ds, service dr-cpu, versions 1.0
Added to channel ds, service fma-cpu-service, versions 1.0
Added to channel fmactl, service fma-phys-cpu-service, versions 1.0
Added to channel ds, service fma-mem-service, versions 1.0
Added to channel fmactl, service fma-phys-mem-service, versions 1.0
Added to channel fmactl, service fma-pri-service, versions 1.0
Added to channel spds, service mdstore, versions 1.0
Added to channel ds, service md-update, versions 1.0
Added to channel ds, service domain-shutdown, versions 1.0
Added to channel ds, service domain-panic, versions 1.0
Added to channel spds, service pri, versions 1.0
Added to channel ds, service var-config, versions 1.0
fatal error: No such file or directory: Unable to open VLDC instance /devices/virtual-devices@100/channel-devices@200/virtual-channel@0:hvctl fo
contacting hypervisor
[ Sep 5 16:29:27 Method "start" exited with status 1 ]
Any help would be greatly appreciated!!!

Hi Every one,
I after installing Ldom , when I try to start ldom
I am getting same error ..any fix or any suggestion ?
./ldmd_start
Added to channel ds, service dr-cpu, versions 1.1 1.0
Added to channel ds, service dr-crypto-mau, versions 1.0
Added to channel ds, service dr-crypto-cwq, versions 1.0
Added to channel ds, service dr-vio, versions 1.0
Added to channel ds, service fma-cpu-service, versions 1.0
Added to channel fmactl, service fma-phys-cpu-service, versions 1.0
Added to channel ds, service fma-mem-service, versions 1.0
Added to channel fmactl, service fma-phys-mem-service, versions 1.0
Added to channel fmactl, service fma-pri-service, versions 1.0
Added to channel ds, service keystore, versions 1.0
Added to channel spds, service mdstore, versions 1.0
Added to channel ds, service md-update, versions 1.0
Added to channel ds, service domain-shutdown, versions 1.0
Added to channel ds, service domain-panic, versions 1.0
Added to channel spds, service pri, versions 1.0
Added to channel ds, service var-config, versions 1.0
fatal error: No such file or directory: Unable to open VLDC instance /devices/vi rtual-devices@100/channel-devices@200/virtual-channel@0:hvctl for contacting hyp ervisor

Mi mac boock pro no arranca y aparece una pantalla gris y una rueda girando sin cargar cuando entro con command V aparece este error BootCacheControl: Unable to open BootCacheControl: Unable to open /var/db/BootCache.playlist: 2 No such file or directory

Hola atodos/as. Necesito ayuda.
Mi mac boock pro no arranca y aparece una pantalla gris y una rueda girando sin cargar cuando entro con command V aparece este error BootCacheControl: Unable to open BootCacheControl: Unable to open /var/db/BootCache.playlist: 2 No such file or directory

TDMS unable to open directory or ftp

Similar Messages

Maybe you are looking for