TDMS4HCM  - problem with Data Transfer

Hello,
When I am executing Start Data Transfer step system ends up with error - "Execution of program /1CADMC/OLC_000000000144318 failed, return code 2" or Z_PA0022_014: Function module "/1CADMC/OLO_000000000093370" notfound. For each table (f.ex. PA0000, PA0001, ..., or HRP1000, etc.) system generates such error message.
I tried to change Write Behaviour (all available options) but it doesn't resolve the problem.
Have you ever had such problem?
Thanks,
Jerzy

Hi Harmeet,
The system was installed on sender and receiver system and it was running. The problem appeared when basis team perform system copy from production to test environment. Client which was used for TDMS was deleted so basis had to recreate it. from that point I have the problem. No additional settings where done for TDMS on receiver system afterwards.
In the receiver system we have installed add-ons: DMIS, DMIS_CONT and DMIS_HR (tdms and sender systems were not changed).
Should we install something else on receiver syst.?
Thanks,
Jerzy

Similar Messages

  • I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

    I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

    Hi,
    Regarding the issue here, please take a look at the below links to see if they could help:
    Slow data transfer speed in Windows 7 or in Windows Server 2008 R2
    And a blog here:
    Windows Server 2012 slow network/SMB/CIFS problem
    Hope this may help
    Best regards
    Michael
    If you have any feedback on our support, please click
    here.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Problems with data transfer to CEN via SAPCCM4X agent

    Hello!
    We are facing with the the following problem with data transfer since we installed SAPCCM4X agent:
    - new alerts can only be seen within alert history
    - old alerts cannot be deleted
    We checked the agents via RZ21 and also the appropriate log files do not get further information.
    When we stop the SACCM4X agents and the monitoring data is representing via RFC connection everything is ok.
    Can some one help to solve this problem?
    Thank you!

    As Woodmeister50 told, direct connect between two iMacs via Ethernet cable is much faster than via adaptor, I suppose.
    OS X: How to migrate data from another Mac using Mountain Lion and earlier
    OS X: How to migrate data from another Mac using Mavericks

  • Iphoto problem with data transfer

    Hi,
    I just got the new Macbook and had a data transfer done from my old Ibook. However not all of my photos migrated over, or at least it appears that way. When I open Iphoto there is the information for these photos but with a blank image. Is there anyway I can get the images from another source in my computer or should I just try and copy and transfer those pictures again from my old computer?

    Welcome to the Apple Discussions.
    Back Up and try rebuild the library: hold down the apple and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
    Regards
    TD

  • Problems with data transfer iMac to imac

    I am transferring information from a 2008 iMac to a new 2014 iMac using an ethernet cable and a thunderbolt/ethernet adaptor. It has taken over 21 hours so far. Is this normal? At the Apple store they suggested it would take around 6.
    The new iMac has a screen saying 'Transferring your information' and a moving stripy blue and white line which is presumably to reassure me that something is happening - it isn't!
    I followed the instruction on the Apple website. Since then, I have read that one should turn off wifi on both computers before using Migration Assistant (I didn't because that wasn't in the directions).  I can't access the new computer but have turned off the wifi on the old one.
    There is about 319 gb data on the old computer.
    What shall I do? I need to be able to use the computer for work tomorrow.
    How can I stop the data transfer? There is no obvious means of doing so, there is also no information of how long it would take or how long might be left
    Thank you

    As Woodmeister50 told, direct connect between two iMacs via Ethernet cable is much faster than via adaptor, I suppose.
    OS X: How to migrate data from another Mac using Mountain Lion and earlier
    OS X: How to migrate data from another Mac using Mavericks

  • Module problem with data transfer

    ok so heres the problem i have created a module which works
    as expected when i run it directly
    but when i load it into a module loader it the http service
    doesn't seem to be able to work?
    this is also the case when im trying to connect to a database
    in an AIR project.
    you can login using 'Quintos' as the username and password

    also better mention the module is in a folder called modules
    in the src folder
    and is named HRAdmin.mxml
    if someone could tell me how to fix this problem i'd be your
    friend for life :P

  • Error while executing Initialize with Data Transfer for 0FI_GL_10

    Hello All,
    Post Pre prod refresh, our timestamp for the datasource 0FI_GL_10 got reset. Due to which our deltas did not bring any records to the BW system.
    First we did an Initialize without data transfer for all the BW related datasources. The deltas were then set properly for all datasources except 0FI_GL_10.
    We then raised a message to SAP and they suggested to run the 'Initialize with data transfer' for 0FI_GL_10 so that the timestamp is set and accordingly the deltas are fixed.
    The issue now is we are getting the following error message while running INIT with data transfer.
    Job terminated in source system --> Request set to red
    Message no. RSM078
    We have copied the data till July 1st week of 2011.
    Please advice. The issue is very critical.
    Thanks & Regards
    Sneha

    Hi Arvind
    Thanks for your inputs.
    Please find below the details of the short dump.
    Runtime Errors         DBIF_RSQL_SQL_ERROR
    Exception              CX_SY_OPEN_SQL_DB
    Date and Time          09/07/2011 11:25:32
    Short text
         SQL error in the database when accessing a table.
    What can you do?
         Note which actions and input led to the error.
         For further help in handling the problem, contact your SAP administrator
         You can use the ABAP dump analysis transaction ST22 to view and manage
         termination messages, in particular for long term reference.
    How to correct the error
         Database error text........: "ORA-01652: unable to extend temp segment by 128
          in tablespace PSAPTEMP"
         Internal call code.........: "[RSQL/FTCH/FAGLFLEXT ]"
         Please check the entries in the system log (Transaction SM21).
         If the error occures in a non-modified SAP program, you may be able to
         find an interim solution in an SAP Note.
         If you have access to SAP Notes, carry out a search with the following
         keywords:
         "DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
    Information on where terminated
        Termination occurred in the ABAP program "GP_GLX_FAGLFLEXT" - in
         "FETCH_TO_ISTRUCTURE".
        The main program was "SBIE0001 ".
        In the source code you have the termination point in line 903
        of the (Include) program "GP_GLX_FAGLFLEXT".
        The program "GP_GLX_FAGLFLEXT" was started as a background job.
        Job Name....... "BIREQU_4N3PZQ12IA0X0PYGEA85IG39S"
        Job Initiator.. "BIWREMOTE"
        Job Number..... 11203300
        The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
        procedure "FETCH_TO_ISTRUCTURE" "(FORM)", but it was neither handled locally
         nor declared
        in the RAISING clause of its signature.
        The procedure is in program "GP_GLX_FAGLFLEXT "; its source code begins in line
        840 of the (Include program "GP_GLX_FAGLFLEXT ".

  • URGENT ! JDEV 10.1.2 Problem with data control generated from session bean

    I got a problem with data control generated from session bean which return a collection of data transfer object.
    The dto's seem to be correct. The session bean load correctly the data into and the object's are plenty of data. Using the console to display the dto content is ok.
    When generating a data control from this session bean and associate the dto included in the collection only the first object level and one-to-one dto object are correctly setted in the data control. Object that represent collection into the dto (one-to-many foreign key) are setted as collection with an iterator but the structure of the object is not setted. I don't know how to associate this second level of collection with the dto bean class to obtain the attributes definition.
    I created a case with hr schema like the hrApp demo application in the tutorial with departments and employees table. I got the same problem.
    Is it a bug ?
    It exists a workaround to force the data control to understand the collection data structure ?
    Help is welcome ! this is urgent !!!

    we found the problem by assigning the child dto bean class to the node representing the iterator in the xml file corresponding to the master dto.

  • Having a problem with dates when I send my numbers doc to excel. dates are all out and that they have to cut and paste individual entries onto their spreadsheet. Any idea how I can prevent this

    having a problem with dates when I send my numbers doc to excel. dates are all out and that they have to cut and paste individual entries onto their spreadsheet. Any idea how I can prevent this.
    I'm using Lion on an MBP and Numbers is the latest version

    May you give more details about what is wrong with your dates ?
    M…oSoft products aren't allowed on my machines but I use LibreOffice which is a clone of Office.
    When I export from Numbers to Excel and open the result with LibreOffice, the dates are correctly treated.
    To be precise, dates after 01/01/1904 are correctly treated. dates before 01/01/1904 are exported as strings but, as it's flagged during the export process, it's not surprising.
    Yvan KOENIG (VALLAURIS, France) mardi 3 janvier 2012
    iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My iDisk is : http://public.me.com/koenigyvan
    Please : Search for questions similar to your own before submitting them to the community
    For iWork's applications dedicated to iOS, go to :
    https://discussions.apple.com/community/app_store/iwork_for_ios

  • Problem with date format when ask prompt web-intelligence

    Bo XIR2 with 5 SP. Instaled on Windows 2003 with support Russian.
    Inside BO every labels, buttons - use russian. But when invoke web-report and Prompt appear there is problem with date format.
    Looks like korean format of date 'jj.nn.aaa H:mm:ss'.  I see system settings of date in Win .. everything right
    What i have to do?
    Where i can change format date for bo?

    GK, try this...
    decode(instr(packagename.functionname(param1 ,param2),'2400'), 0, to_date(to_char(to_date(rtrim(packagename.functionname(param1 ,param2),'(PT)'), 'Month dd, yyyy "at" hh24mi'),'mm/dd/yyyy hh24mi'),'mm/dd/yyyy hh24mi'),
                                                                      to_date(to_char(to_date(rtrim(packagename.functionname(param1 ,param2),'(PT)'), 'Month dd, yyyy "at" "2400"')+1,'mm/dd/yyyy "0000"'),'mm/dd/yyyy "0000"'))-Marilyn

  • Problem with Date format

    Got one more problem Merilyn and Radhakrishnan...
    Regarding the soln y provided me earler with the thread "Problem with date format"...
    What is happening is....I am able to change the 2400 to 0000 but when it is changed from 2400 on jan 1st to 0000 the hour is changing but not the date....the date still remains as jan 1st instead of jan 2nd....
    Eg: Jan 1st 2400 -- changed to -- jan1st 0000
    instead of jan 2nd 0000
    Could you please help me in this issue...
    Thanks,
    GK

    GK, try this...
    decode(instr(packagename.functionname(param1 ,param2),'2400'), 0, to_date(to_char(to_date(rtrim(packagename.functionname(param1 ,param2),'(PT)'), 'Month dd, yyyy "at" hh24mi'),'mm/dd/yyyy hh24mi'),'mm/dd/yyyy hh24mi'),
                                                                      to_date(to_char(to_date(rtrim(packagename.functionname(param1 ,param2),'(PT)'), 'Month dd, yyyy "at" "2400"')+1,'mm/dd/yyyy "0000"'),'mm/dd/yyyy "0000"'))-Marilyn

  • Problem with date calculation

    I am a rookie in SAP i have a small problem with date.Do we have any function module to find out the first day in a month if we give out the system current date ?? Pls help me out.

    Hi,
    As Ganesan told,you can do.
    Here is the sample code.
    data v type sy-datum.
    data d type DTRESR-WEEKDAY.
    v+6(2) = '01'.
    v4(2) = sy-datum4(2).
    v0(4) = sy-datum0(4).
    CALL FUNCTION 'DATE_TO_DAY'
      EXPORTING
        date          = v
    IMPORTING
       WEEKDAY       = d.
    write d.

  • Problem with date format from Oracle DB

    Hi,
    I am facing a problem with date fields from Oracle DB sources. The date format of the field in DB table is 'Date base type is DATE and DDIC type is DATS'.
    I mapped the date fields to Date characters in BI. Now the data that comes to PSA is in weird format. It shows like -0.PR.09-A
    I have changing the field settings in DataSource  to internal and external and also i have tried mapping these date fields to text fields with out luck. All delivers the same format.
    I have also tried using conversion routines like, CONVERSION_EXIT_IDATE_INPUT to change format. It also delivers me the same old result.
    If anybody of you have any suggestions or if anybody have you experienced such probelms, Please share your experience with me.
    Thanks in advance.
    Regards
    Varada

    Thanks for all your reply. I can only the solutions creating view in database. I want some solution to be done in BI. I appreciate if some of you have idea in it.
    The issue again in detail
    I am facing an issue with date fields from oracle data. The data that is sent from Oracle is in the format is -0.AR.04-M. I am able to convert this date in BI with conversion routine in BI into format 04-MAR-0.
    The problem is,  I am getting data of length 10 (Output format) in the format -0.AR.04-M where the month is not in numericals. Since it is in text it is taking one character spacing more.
    I have tried in different ways to convert and increased the length in BI, the result is same. I am wondering if we can change the date format in database.
    I am in puzzle with the this date format. I have checked other Oracle DB connections data for date fields in BI, they get data in the format 20.081.031 which will allow to convert this in BI. Only from the system i am trying creating a problem.
    Regards
    Varada

  • Problem with date format dd/mm/yyyy. But I need to convert yyyy-mm-dd.

    Dear friends,
    I have the problem with date format. I receiving the date with the format dd/mm/yyyy. But I can upload to MySQL only in the format of yyyy-mm-dd.
    how should I handle this situation, for this I've created these code lines.But I have some problem with these line. please help me to solve this problem.
    String pattern = "yyyy-mm-dd";
    SimpleDateFormat format = new SimpleDateFormat(pattern);
    try {
    Date date = format.parse("2006-02-12");
    System.out.println(date);
    } catch (ParseException e) {
    e.printStackTrace();
    System.out.println(format.format(new Date()));
    this out put gives me Tue Apr 03 00:00:00 IST 2007
    But I need the date format in yyyy-mm-dd.
    regards,
    maza
    thanks in advance.

    Thanks Dear BalusC,
    I tried with this,
    rs.getString("DATA_SCAD1")// where the source from .xls files
    String pattern = "yyyy-MM-dd";
    SimpleDateFormat format = new SimpleDateFormat(pattern);
    try {
    Date date = format.parse("DATA_SCAD1");
    System.out.println(date);
    } catch (ParseException e) {
    e.printStackTrace();
    System.out.println(format.format(new Date()));
    this out put gives me Tue Apr 03 00:00:00 IST 2007
    But I want to display the date format in yyyy-mm-dd.
    regards,
    maza

  • Tp ended with error code 0247 - addtobuffer has problems with data- and/or

    Hello Experts,
    If you give some idea, it will be greatly appreciated.
    This transported issue started coming after power outage, sap system went hard shutdown.
    Then we brought up the system. Before that , we do not have this transport issue.
    our TMS landscape is
    DEV QA-PRD
    SED-SEQSEP
    DEV is having the TMS domain controller.
    FYI:
    *At OS level, when we do scp command using root user, it is fine for any TR.
    In STMS, while adding TR in SEQ(QA system), we  are getting error like this.
    Error:
    Transport control program tp ended with error code 0247
         Message no. XT200
    Diagnosis
         An error occurred when executing a tp command.
           Command:        ADDTOBUFFER SEDK906339 SEQ client010 pf=/us
           Return code:    0247
           Error text:     addtobuffer has problems with data- and/or
           Request:        SEDK906339
    System Response
         The function terminates.
    Procedure
         Correct the error and execute the command again if necessary.
    This is tp version 372.04.71 (release 700, unicode enabled)
    Addtobuffer failed for SEDK906339.
      Neither datafile nor cofile exist (cofile may also be corrupted).
    standard output from tp and from tools called by tp:
    tp returncode summary:
    TOOLS: Highest return code of single steps was: 0
    ERRORS: Highest tp internal error was: 0247

    when we do scp using sm69,
    SEDADM@DEVSYS:/usr/sap/trans/cofiles/K906339.SED SEQADM@QASYS:/usr/sap/trans/cofiles/.
    it throws the error like below,
    Host key verification failed.
                                                                                    External program terminated with exit code 1
    Thanks
    Praba

Maybe you are looking for