TDS AMOUNT CAN NOT REVERSED THROUGH MR8M
Dear Gurus,
Through MIRO TDS deducted but when i reverse the same document through MR8M TDS amount can not reversed that amount credited to vendor account.
NO LINE ITEM CREATED FOR TDS REVERSED ENTRY.
Please do the needfull.
Regards,
MAHESH K SINGH
*assign full marks
Hi,
You need to check the MIRO (LIV) Invoice Date and the Date of TDS payment.
If you have open Invoice in Vendor Account and the TDS is paid for the Month....... then with such exceptional cases, your TDS amount will not be reversed as the TDS is already paid.
Assign point, if useful
Regards
Sandeep
Similar Messages
-
Hello, I have a macbook pro retina-2013.
About Mavericks I could set my 4K monitor via HDMI on 2560x1440.
This I can not get through at Yosemite. Can someone help me there?They really pushed that it would all work great! Has anyone had the same struggle? Are there any step-by-step instructions to get linked up?
Call Verizon's wireless tech support & explain your problem to them. They will provide "step-by-step" instructions over the phone.
Take notes too!
TIP: If you do call & don't want to go through all those darn promps, when you initially call, just don't say anything. The automatic voice will then say, "will connect you to a service rep." -
Cash Discount Amount Can not be posted
Hi Guru,
While doing MIRO transaction against work order system is giving error 'Cash Discount Amount can not be posted' no cash discount is posted nor payment term given is having any provision for discount.
Kindly help me in resolving issue
Regards,
ShekharHi shekar,
May i know the solution for this.
Thanks
Sekhar J -
Can not search through 1003 results
1. Firefox Help
2. Search
Found 1003 results for "where are my posts"
I can not search through 1003 results to find my solution. I want to see what I have posted, to what threads I’m subscribed and responses to all. How?Thank you,
But I don’t see these specific words “Firefox Support Forum
The Official Community-Driven Support Web Site for Firefox” on this page. Perhaps I have not searched for them thoroughly enough. Are they at the top, bottom, somewhere else or on a different page?
Maybe I am not seeing the same page that you are seeing. I recently downloaded Firefox 9.0.1. If we are not seeing the same page, is there something I can do to correct this? -
Why can not purchase through my cr card since last time on 7/2/2012
on 7/2/2012 i purchased chips twice for $99.99 each for texas poker game one chips order credited in the game and the other not credited mainwhile both deducted from cr. card . Now i can not purchase through my card and give me massage refer to itune support for help although there is enough balance in the card.
Thanks for supportingYou are not talking to Apple here. This is only a user-to-user forum and noone here can have idea of what if anything has happened to whatever it is you're talking about, and noone here can do a thing to resolve your issues.
It would seem you need to be talking to iTunes support, which is addressed through iTunes, not these or any other of these Apple Support Communities forums. -
I have macbook without a firewire port, I have usb 2.0 port, now my os is not working I can not get through apple logo loading , I can not enter safe mode, I can only enter one user mode, how can I backup my data, I have very important data in my hdd
Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc. -
the safari can search website but it can not go through the icon. screen color blacken. solution?
Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
3ds can not get through my wpa2
Not sure if anyone can offer any suggestions but my daughters 3ds can not get through the wpa2 security to access the Nintendo wifi network. Anybody have any suggestions as to how we can get by this?
loper wrote:
Not sure if anyone can offer any suggestions but my daughters 3ds can not get through the wpa2 security to access the Nintendo wifi network. Anybody have any suggestions as to how we can get by this?
The following links may help.
http://en-americas-support.nintendo.com/app/answers/detail/a_id/499/p/48/session/L3RpbWUvMTM3NjMzMTc...
http://www.nintendo.com/consumer/wfc/en_na/ds/firewall.jsp
If neither of these resolve the problem you should contact Nintendo customer support. -
Material invoice reversal through MR8M
Hi Experts,
User has processed MIRO for multiple POs and has passed subsequent debit for few, for which system is not allowing him to reverse the invoice through MR8M. Now he can't reverse the subsequent debit invoice, as they are already paid. Can we pass credit memo for this invoice and manually reverse the FI document? Or any other way out for this?
Ragards
Partha Sarathi SamantarayYes logically it is incorrect.Since you had transferred all the commitments form fiscal year 2009 to fiscal year 2010 you will surely get the error message of budget exceeded in the year 2010 this is because you PR & PO's is now in the year 2010 not in 2009.So I suggest you to transfer the budget of the year 2009 also OR you can update the current budget available.But then also if do not want the error message,you had to first deactivate the Project budget using T code CJBW & after reversing then activate the Project budget using T code CJBV.
Regards,
Gagan -
TDS amount getting wrong reverse in f-54
Hi experts
As per my knowledge tds is deducting twice. At the time of advance payment and invoice booking. and tds amount whichever is lower is getting reverse in f-54. But in my present scenario tds which is deducted at the time of invoice booking is getting reverse instead of tds which is deducted at the time of advance payment and i also check the tds amount is lower than tds amount of invoice.
This scenario has been occurred for only one vendor, In case of other vendors,its looks correct.
Please advise me .
Thanks®ards
D Royhello sir
Thanks for your early response.
According to my present scenario,At the time of Advance
Advance to sub contractor Rs.50000---dr.
tds payable on sub contractor Rs.500--cr.
Invoice
vendor Rs.100000---cr.
tds payable Rs.1000---cr.
in f-54 tds Rs.500 should get reverse but system reversing tds Rs.1000
Please advise -
TDS Amount is not appearing in TDS Certificate
HI Sap Experts,
J1INCERT - In TDS certificate, TDS column, amount is not appearing, but in column Total Tax deposited amount is appearing correctly.
My client is using ECC 6.0 Version.
Thanks in adavance .
Regards,
LakshmiHi Lakshmi,
Have you got the solution?
I have the same problem.Please let me know what needs to be done if have found the solution.
Thanks,
Kumar -
GRE traffic can not pass through LRT224 IPSec Tunnel
Hi,
We have a trouble when using Cisco Router GRE tunnel plus LRT224 IPSec Gateway-Gateway Tunnel.
We found after reboot, GRE packets can not pass trough LRT224 IPSec tunnel. need to restart serval time then gre will back to normal.
Besides that, GRE keepalive packets can not pass trough LRT224 IPSec Tunnel.
please help. I had tried to upgrade to latest firmware version.
Firmware Version : v1.0.3.09 (Dec 26 2014 14:28:46)
A-END:
interface Tunnel1
ip address 10.216.80.105 255.255.255.252
ip mtu 1400
ip nat outside
ip virtual-reassembly in
ip tcp adjust-mss 1360
ip ospf network point-to-point
ip ospf hello-interval 3
ip ospf cost 10000
tunnel source 10.216.81.2
tunnel destination 10.216.80.90
end
B-END:
interface Tunnel11
ip address 10.216.80.110 255.255.255.252
ip mtu 1400
ip tcp adjust-mss 1360
ip ospf network point-to-point
ip ospf cost 10000
ip ospf hello-interval 3
tunnel source 10.216.80.91
tunnel destination 10.216.81.3
end
CISCO2911 <> LRT224 <> INTERNET <> LRT224 <> CISCO 2621
SanCan you post the results from the below command for the Cisco Routers?
IOS Command: "sh version"
Why not static route without NAT through the LRT224 IPSec VPN?
Just curious why did you use LRT224's for the Site to Site VPN instead of the Cisco Routers?
Please remember to Kudo those that help you.
Linksys
Communities Technical Support -
Can not get through to (800) COMCAST 934-6489
Unable to get through to COMCAST, says line is disconnected or call can not be placed. Customer Service? Have been without internet service for over 6 hours. Any suggestions?
kristilynn100 wrote:
Unable to get through to COMCAST, says line is disconnected or call can not be placed. Customer Service? Have been without internet service for over 6 hours. Any suggestions?
I apologize for the trouble you had with this. Were you able to get through, if not send me a private message with a few details of the issue. I might be able to help out. -FC -
Can not insert through dblink in procedure
I have created one procedure which is selecting,inserting and updating data to another database on same server using dblink. it select and update data successfully but when it is going to insert using dblink it gives following error.
ORA-02019: connection description FOR remote DATABASE NOT FOUND
ORA-02063: preceding line FROM PAS
But when i executed same insert statement on sql prompt it is exeuted successfully.
insert into tab1@dblink values('blah','blah','blah');
I have dropped all my dblink and recreate it again i have given priveleges externally means insert any table,select any table,update any table to username.
but still i have recieved same error. Please guide me.
Global name of database is same as dblink name.
Thanks in advance
dhaval1. select * from global_name
PAS and RATEPAS
I have created two database on same server.
named pas and ratepas.
I can not send procedure's code. but actual logic of procedure is selecting a record from temporary table and check whether it is a valid record on the basis of time_stamp and it is inserting a record to base table and update time_stamp to other two tables. and it is giving error only when
SELECT * FROM dba_db_links;
OWNER
DB_LINK
USERNAME
HOST
CREATED
PUBLIC
PAS
PASUSER
OWNER
DB_LINK
USERNAME
HOST
CREATED
pas125
13-OCT-05 -
HT1918 Got a problem in my iTunes account and I can not purchase through
Got a problem in my iTunes account and I can not purchase through
Most of the people on these public forums, including myself, are fellow users - you're not talking to iTunes Support here. I've asked the hosts to remove your email address from your post.
What happens when you try to buy them, does the 'buy' button not work, do you get any error messages ... ?
If you are getting a message to contact iTunes Support then you can do so via this link and ask them for help (we won't know why it'sappearing) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
If it's a different problem ... ?
Maybe you are looking for
-
Problem with Toolbars in LVC_S_LAYO
Dear all, i am using structure LVC_S_LAYO. Here in my toolbar some icons like show next,summation are inactive. Also i am using LVC_T_FCAT where i have set DO_SUM = 'X'. When i see in debugging the value X is getting passed from my it_fieldcatalog ta
-
How to associate a checkbox to a group of fields... For example a row contains >a check box > a textfield ,an image etc how to associate the whole row to the checkbox on that particular row,such that when it is checked and applied for delete ,the who
-
Access Outlook Shared/Delegated contacts in Word 2010's Quick Access Toolbar (QAT)
Hello Nerds, Is there any way to access Outlook Shared/Delegated contacts in Word 2010's Quick Access Toolbar (QAT). I am able to see shared/delegated contacts in Outlook by clicking "Open Shared Contacts" but Word's 2010 QAT does not have any option
-
Model Glue - Passing variables between events
Hi, I am working on coldfusion with model glue architecture. Is there any method to get the value that is set in the controller file driven from a particular event to be accessed from another event. Example Code in controller file :- <cfset arguments
-
OSB Validate action fails even an element is nillable="true"
Hi, I have declared two elements in my inline schema nillable="true": <xsd:element name="Skip_CreditChk" nillable="true" type="xsd:boolean" minOccurs="0" maxOccurs="1"/> <xsd:element name="Observation_End_Date" nillable="true" type="xsd:date" minOccu