TDS Certificates Number Range issue

Dear all
I am doing J1INMIS for particulat section code say 3200 and withholding key 194 c, then i am updating the challan and it takes me to screen Create remittance challans, here after processing i get the following error-
Number Group not maintained for CO code 1000 section 3200 and business place 194 C
kindly suggest , is there any table to update , as i have chked the table where in found that number group is also maintained and internal number range is also assgined...
please let me knw if any other table needs to update,
regards
sgs

Hi,
Good evening and greetings,
Please go through the following link...You will have to maintain the number range for your TDS Certifcates...I will confirm the tcode for the same...
http://help.sap.com/saphelp_erp2005vp/helpdata/en/29/3e3d911ab311d4b5b5006094b9ec21/frameset.htm
Please reward points if found useful.
Thanking you
With kindest regards
Ramesh Padmanabhan

Similar Messages

Could not determine the year for TDS certificate number range

Hello Experts,
while i have configured TDS. now in order to post Invoice, i am getting error "Could not determine the year for TDS certificate number range".
i have also mentioned/configured all parameters required for Certificate Numbering & assignment to Co. Code, TDS Tax Type/Code, etc
please if someonce can help, how to clear this error & go ahead.

Dear,
Use transaction SM30. Enter J_1IINDCUS in table/view field and click on maintain. Press new entry tab and enter your company code. Just select "APRIL" in start month and save. This is basically a CIN setting.
it should be solved................

Withholding Tax Certificates Number Range

Hi All,
There are two options in SPRO setting to configure Withholding Tax Certificates:
1) FA->****->WT->EWT->Posting->Certificate Numbering for Withholding Tax.
another option
2) FA->****->WT->EWT->Posting->India->Withholding Tax Certificates for Vendors and Customers:
I had applied both the method but still Certificate Number is not printing while running J1INCERT.
Please help why number is not getting printed.
Regards,
Ankur

Hi All,
When I give the print command system did not throw any message this time and excute the print and assign certificate number as per J1INMIS Report but due to some technical reasons print did not came out of the printer.
Now, when i again reprinting certificate from J1INCERT then system is showing error message " No data selected for printing"
Can anyone tell me how to take reprint of certificates and what would happen to earliar assigned certificate number range.
Further, I have taken the print earliar without TDS Certificate Number but acknowledgement number was getting updated and successfully reprinting from J_1IEWT_ACKN_N Table, but now this is also showing blank.
Please help.
Regards,
Ankur

TDS Challen number range

All SAP Gurus,
we are having TDS Challen number range (for issuing TDS challens), for one plant.
Now we want to create the different number range for other plant.
Where this number range can be maintained and is it FI or MM issue?
Regards,
rajan

Hi
Challans can be produced per company code and section code. How are your plants configured ? Are they company codes ? Are they have different TANs ? If so, you can maintain different number ranges for each plant.
Regards

I have number range issue for fi posting.

hi gurus,
i have number range issue for fi posting (fb01,fb50).
problem in updating table glpca due to duplication of record.
INSERT GLPCA FROM TABLE T_GLPCA .
With Regards,
Shakthi Raj N.

error msg after generating document no and it is not getting updated in data base
error msg
"Express document "Update was terminated" received from author "ecciabap""
Client.......   750
User.....   ECCIABAP
Transaction..   FB01
Update key...   C83B07DE4DADF13CB4950017A4AB8015
Generated....   02.03.2009, 20:37:23
Completed....   02.03.2009, 20:37:23
Error Info...   00 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC

TDS Certificate, Challan Payment Issue and BSR Code Issue

Hi All,
I have configured Extended withholding tax as follows and encountered some issues
1. Specify Document Type (Accounts Payable): Here I have given Document type as SA and I am able to Pay the remittance challan through Post Vendor challan transaction.
MY question is How can I update my check no. I tried to update through FCH5 But it is showing no data.
2. Form 16A Certificate: How the field Cheque / DD No (If Any) gets updated?
3. BSR Code in Form 16A: I have maintained Bank branch in FI02. and made the remittance challan through that bank.
but still my BSR Code is not updating in Form 16A.
4. Form 16A Certificate: How does the Quarter Acknowledgement No field gets updated?
Kindly provide me the solutions for the above queries.
Your inputs are very much appreciated.
Thanks in Advance
Best Regards
Shashi
Edited by: shashi mantripragada on Apr 7, 2010 9:43 AM
Edited by: shashi mantripragada on Apr 12, 2010 2:13 PM

Hi,
Please check entries in the number ranges that needs to be maintained for WT certificates.
Financial Accounting (New) - Financial Accounting Global Settings (New) - Withholding Tax - Extended Withholding Tax - Posting - India - Withholding Tax Certificates for Vendors and Customers - Maintain Number Ranges
And also check its assignment.
Hope this helps.
Vikas.

TDS Certificate Number error

Dear Experts,
When i am trying to take print for tds cerfiticate, its not generating number , its showing error Number Range generation failure
please help me out
regards,
Gopi.P

Hi gopi,
Kindly maintain the following:
J1INCRT
J1INCTNO
JINCT
After maintaining the above then take the tds certificate print out, in print preview, you won't get the certificate no. but once you take the print out, you will get the certificate no.
Regards
Anuj Agarwal

How to find out old tds certificate number for vendors who r asking duplica

Dear Expert,
We have a vendor to whom we have issued tds certifcate in the year 2008 . Now the same party is asking for reprinting duplicate one.
But how to get the old certificate number.
If any table can be informed with document number we can trace the certificate number.
Regards,
Alok

HI Alok,
Table : with-item is having data.
Steps:
Se16 table with_item
vendor name : xxxxx
fiscal year 2008
company code : xxxx
exexute.
list of records will displaied.
Certificate Number stored in field called CTNUMBER
Techinical name
with_item-CTNUMBER.
Then use the J1inrep
Regards
Madhu m
Please use the useful links for cin-fi
http://wiki.sdn.sap.com/wiki/x/UgTpCw (RUPEE WORD FORMAT)
http://wiki.sdn.sap.com/wiki/x/8oMEDg (J1INEMIS )
http://wiki.sdn.sap.com/wiki/x/2BAMDg (J1INACKN )
http://wiki.sdn.sap.com/wiki/x/3xAMDg (J1INCCREP)
Edited by: M Madhu on May 23, 2011 4:13 PM

Number Range issues with sales orders in CRM and R/3

Hi,
We are currently using CRM4.0. I have sales orders created in R/3 and they are replicated into CRM. These sales orders can only be created in R/3. I have given them a number range of 0000000001 and 0005899999, however we have reached the number 0005899999 so we increased the internal number range for the sales orders in R/3 to 0009499999, however we forgot to update the number range for the corresponding sales transaction type in CRM so we are getting the following error in CRM:
+Enter a business transaction number between 0000000001 and 0005899999
Message no. CRM_ORDERADM_H532
Diagnosis
You have attempted to enter a transaction number which is not allowed for the transaction type.
Procedure
Enter a number between &1 and &2. Make sure that you issue a number which has not already been issued.+
We have now updated the CRM number range to match that in R/3 to 0000000001 and 0009499999 but we are still getting the error above on our existing sales orders in CRM. I thought that increasing this number range it will remove the error but when I open sales orders in CRM the error is still there.
Is there any way to remove this error message? Any tips or advice would be much appreciated.
Please note we've already checked the post Re: Number Range Problem and note 427289.
Kind Regards
JoJo

Hi Sirisha,
The solution depends on the exact issue you are facing.
The CRM Sales Order is created OK, but you only see the error when you open the Sales Order?
If this is the case, then you can follow the steps below:
1. Find the Message ID and Message No for the error message
2. Use Program - CRM_MESSAGES_DELETE to delete error messages from the error producing Sales Orders.
Let me know if this is not the issue you are facing.
Regards,
Nelson

Vendor number range issue in BUCF transaction

Hi,
We are implementing the SRM 5.0 with Extended Classic scenario. I my current SRM system is already connected with 3 SAP R/3 system and I am implementing and adding 4th SAP R/3 system.
I am having an issue to replicating the vendor master from 4th R/3 system to our SRM system due to wrong number ranges in BUCF transaction code.
Current Number Range in SRM systems are:-
01     0010000000            0014999999     10003009
AB     0001000000        0009999999                        X     --> (7 Digits)
My new vendor master from 4th R/3 system is:-
0080000001        to     0080029999    --> (8 Digits)
My new vendor master number range is overlapping with my internal number range 01. As we know that we cannot reduce the lower range of 01 from 0010000000 to 0000000001. Also I cannot increase the number AB higher value from 0009999999 to 0099999999.
Can you any one please suggest me to correct the number range?
Thanks,
Senthil

Hello Senthill,
The vendor replication to external number ranges works as follows:-
(1) Cross-Application Components SAP Business Partner > Business Partne
> Basic Settings > Number Ranges and Groupings > Define Number Ranges
Here you sould define an external number range which corresponds to
the R/3 numbers. You may want to have more than one external range
in order to replicate all vendors.
(2) Cross-Application Components > SAP Business Partner > Business Part
> Basic Settings > Number Ranges and Groupings > Define Groupings and
Assign Number Ranges
For each replication run, you can download the vendors which correspond
to the external number range / grouping which is marked as 'standard
external'.
So, you will have to replicate your vendors separately for each number
range:-
Select the correct grouping each time by marking 'Ext.Std Grping'
and then run BBPGETVD for the vendors to be assigned to this grouping.
As standard, the customized settings for the number ranges
would have to be changed for each run of BBPGETVD and BBP_VENDOR_SYNC.
If you run the update or synchronization in combination with a
BADI the intervals could be taken into account.
The BADI is BBP_TRANSDATA_PREP
The methods are:-
Method: PREPARE_REPLICATION_DATA (intitial download)
Method: PREPARE_UPDATE_DATA (update)
Import data is stored in CT_LFA1 should be copied to an
internal table. There the required intervals can be determined.
This BADI is not assigned in the IMG but can be seen through SE18.
I hope this information is helpful.
Kind Regards,
Edel.

Number range Issue for Business partners

In our Feeder system (SAP ECC), the number ranges are over lapped for customers and vendors.
For example Customer master record : 100245 is for ABC customer and Vendor Master record: 100245 is for XYZ vendor.
When these records were transferred from ECC to GTS, both were transferred. When searching for a business partner using external number 100245 in GTS it pulls out two records.
First question: Will this be an issue?
Second Question: Is there any way, we can transfer Vendors and Customers which can use different number ranges in GTS?
Please help.

Hi,
1. As soon as we consider only one feeder system overlapping number ranges is not an issue. one external number can be assigned to two internal ones as business partners are having different roles. One as customer and one as vendor.
2. It is not possible to be done with standard functionality as business partners have only one common number range. It would be possible to do a bit of a coding mainly renaming/renumbering within transfer user exit.
Hope this answers your questions,
BR,
Gabriel.

BP creation number range issue in Ic webclient

Dear Experts,
I have been facing an issue in the creation of bp via ic webclient. there are number ranges 01, 02 and z1 made in the system, my requirement is to create bp coming in range z1. This is working fine while creating bps in sap using tcode BP.
But while creating BP through ic webclient, the number range falls in 01. I need to change this to z1. can anyone guide me in this issue? In account identification profiles, what are all parameters need to be checked? Thanks in advance

Hi,
The number range for the business partner is based upon the "Grouping" that you select. In the T code: BP it might be working fine because Z1 must be set as the internal number assignment, which makes it the default grouping for the BPs created in the SAP GUI.
In the Web UI - in the Account creation page ensure that you have the field "Grouping" displayed. The field is not avialable out-of-the-box on this page. If it is not available do the following: Hit the the config mode icon and -> Select General data viewset. Hit "Show avialable fields" and under "HEADER" structure look for "Grouping" field. Add it to the list of displayed fields and save this change.
Now in the General data view set you should be able to select the "Grouping" field and select the grouping that is assigned to your number range "Z1".
Regards,
Ramesh Nallabelli

Number range issue

Hi,
I am trying to create idoc wherein I am getting error :
Runtime Error SAPSQL_ARRAY_INSERT_DUPREC
Exception CX_SY_OPEN_SQL_DB
I checked the details and error is at:
INSERT EDID4 FROM TABLE LIST_CONTAINER_CREATE
I checked the number range for object EDIDOC and it has NRLEVEL(current no) as 1700 which is same as displayed in t-code SNRO for the object EDIDOC.
But when I debug the issue, the next document number generated in FM 'NUMBER_GET_NEXT' is 1500.
How's it possible?
In debug mode, I found below code which gets the next no.
Include LSNR3F01.
CALL 'ThNoGet' ID 'BNRIV' FIELD BNRIV
 ID 'NO' FIELD G_NOIVBUFFER
 ID 'QUAN' FIELD P_QUANTITY
 ID 'PERCENT' FIELD TNRO-PERCENTAGE
 ID 'NONRSWAP' FIELD TNRO-NONRSWAP.
Can somebody clarify this and help me how to solve this short dump issue?
Also when I check EDID4 table, it shows document nos like 1800?
How to solve this?
Regards,
Yogita

HI Yogita,
Could you post the solution for your problem?
Regards,
Siva.

Internal Number range:Issue

Hi,
I am using the internal number range for the employee number creation.
Scenario:
Suppose I have created 13 employee in the organization so far.By mistake I created the wrong employee record(Employee number 00000013).
Now when I delete any existing employee (say "John" with the employee number as 00000013) using the Tcode PU00, I face the following issue:
I am able to delete the record (all the associated infotypes) successfully.
Now when I try to re-create the employee using tcode PA40, it always creates the employee wtih the next number (00000014) and not with 00000013.
I want the new correct employee to have the employee number as 00000013.
Can you please advise?
Regards
Manish

Go to Tcode PA04
Click the Status Delete 0000014 Current Number make it as 000013 and hire

Cin Number range issue.(capturing Excise Invoice)

Hi guys
I created sales cycle and after i am creating excise invoice thru tcode-j1iin
When i enter excise group and series group and after saving it.. it is showing error message that internal number range for J_1IINTNUM
I have maintained number range for this in tcode-j1i9..
and i assigned this number range to billing typejexexcise invoice.
even though error come.
Help in this issue
Here the error message:
Error in allocating internal document number Interval not found Number object J_1IINTNUM

Hi!
Kindly check the number range maintained is as Follows ??
No. Year From Number To Number
01 2008 0001000000 0001099999
CIN only takes No 01, it does not recognises any other no.
Moreover the number range should never be maintained as External Numberr range.
Check the same and let us have the feedback.
Regards,
Dnyandeo H. Ainarkar

TDS Certificates Number Range issue

Similar Messages

Maybe you are looking for