TDS Connect Failure Error 17832 - Login Packet used to open the connection is structually invalid

I have a package which uses TDS, Tabular Data Stream, to connect from a VAX VMS system to SQL server and it works for all flavors of SQL server. Except for one server. When I try to connect to this server the application gets disconnected after sending the
Login 7.x message. The server is running Windows 2008 R2 Standard, SP1, 64-bit and is in a domain. SQL Server is 2008 R2 (10.50.4000). SQL Server is configured for "SQL Server and Windows Authentication mode" in Server Properties,
Security, Server authentication. It is set to "allow remote connections to this server". The TCP/IP Client Protocol is enabled in SQL Server Network Configuration, Protocols for MSSQLSERVER. The SQL log shows 2 Logon source errors
upon the connection attempt :
Error: 17832, Severity 20, State 11.
The login packet used to open the connection is structurally invalid; the connection has been closed. Please contact the vendor of the client library. [CLIENT: 172.19.20.122]
I took a dump of the login packet from the client side package and included it here:
Sending Login7.x message
Sending PktTyp=10 LstPkt=01 PktNum=0001 PktSiz=00B8
0000 b0 00 00 00 01 00 00 71 00 10 00 00 07 00 00 00
0010 a8 00 00 00 00 00 00 00 e0 03 00 00 68 01 00 00
0020 04 09 00 00 56 00 06 00 62 00 02 00 66 00 02 00
0030 6a 00 06 00 76 00 0c 00 00 00 00 00 8e 00 0c 00
0040 a6 00 00 00 a6 00 05 00 00 06 5b e4 96 08 00 00
0050 00 00 b6 00 00 00 4c 00 54 00 56 00 56 00 53 00
0060 42 00 51 00 41 00 b0 a5 b1 a5 47 00 41 00 4e 00
0070 53 00 4b 00 45 00 69 00 68 00 65 00 2d 00 70 00
0080 61 00 2d 00 73 00 71 00 6c 00 30 00 31 00 54 00
0090 44 00 53 00 5f 00 53 00 45 00 52 00 56 00 49 00
00a0 43 00 45 00 53 00 48 00 38 00 34 00 44 00 42 00
0000        q                    h       V   b   f   j
v
0040           [           L T V V S B Q A     G A N S K E i h e - p
0080 a - s q l 0 1 T D S _ S E R V I C E S H 8 4 D B
I found other sites which discussed the connection ring buffers and so, I queried them for any information which might help:
select cast(record as xml) xml_record from sys.dm_os_ring_buffers where ring_buffer_type = 'RING_BUFFER_CONNECTIVITY';
xml_record:
<Record id="53" type="RING_BUFFER_CONNECTIVITY" time="1697484630">
<ConnectivityTraceRecord>
    <RecordType>ConnectionClose</RecordType>
    <RecordSource>Tds</RecordSource>
    <Spid>0</Spid>
    <SniConnectionId>32E3FDFC-2BF2-4EB8-82D2-AE05E73AFCBC</SniConnectionId>
    <SniProvider>7</SniProvider>
    <RemoteHost>172.19.20.122</RemoteHost>
    <RemotePort>1069</RemotePort>
    <LocalHost>156.144.249.81</LocalHost>
    <LocalPort>1433</LocalPort>
    <RecordTime>11/7/2014 15:13:42.729</RecordTime>
    <TdsBuffersInformation>
      <TdsInputBufferError>0</TdsInputBufferError>
      <TdsOutputBufferError>0</TdsOutputBufferError>
      <TdsInputBufferBytes>184</TdsInputBufferBytes>
    </TdsBuffersInformation>
    <TdsDisconnectFlags>
      <PhysicalConnectionIsKilled>0</PhysicalConnectionIsKilled>
      <DisconnectDueToReadError>0</DisconnectDueToReadError>
      <NetworkErrorFoundInInputStream>0</NetworkErrorFoundInInputStream>
      <ErrorFoundBeforeLogin>1</ErrorFoundBeforeLogin>
      <SessionIsKilled>0</SessionIsKilled>
      <NormalDisconnect>0</NormalDisconnect>
      <NormalLogout>0</NormalLogout>
    </TdsDisconnectFlags>
</ConnectivityTraceRecord>
<Stack>
    <frame id="0">0X0000000001E21F3B</frame>
    <frame id="1">0X0000000001E1EE4E</frame>
    <frame id="2">0X00000000010D2984</frame>
    <frame id="3">0X0000000000A8AB94</frame>
    <frame id="4">0X0000000000A8B05E</frame>
    <frame id="5">0X0000000000A8AD57</frame>
    <frame id="6">0X0000000000F651DE</frame>
    <frame id="7">0X0000000000F65395</frame>
    <frame id="8">0X0000000000F68925</frame>
    <frame id="9">0X0000000000F659D6</frame>
    <frame id="10">0X00000000755937D7</frame>
    <frame id="11">0X0000000075593894</frame>
    <frame id="12">0X00000000779159ED</frame>
    <frame id="13">0X0000000077B4C541</frame>
</Stack>
</Record>
I feel the problem is in the configuration of the server's authentication which is requiring something beyond SQL server authentication.
Any help would be appreciated. Thanks in advance.

One other item of note is the "SQL Server Network Configuration (32bit) "on this server is empty -- no "Protocols for MSSQLSERVER" branch like the 64-bit "SQL Server Network Configuration".
This is perfectly normal if all you have is a 64-bit instance on the machine. You would only see items here if you have a 32-bit server.
The odd part is the Native Client Configuration shows up under (32bit) with Client Protocols...
Yes, you always have a 32-bit client, which is to be used with 32-bit applications.
In any case, whether server is 32-bit or 64-bit is immaterial when you connect.
I'm afraid that I have not worked with TDS packets so that I can say what is wrong with this package, and I don't think I will try to read the TDS spec to say what the problem may be. But the issue seems to be that whatever you are using to create
the TDS packets is not doing this fully correctly.
Erland Sommarskog, SQL Server MVP, [email protected]

Similar Messages

7921 shows connection failure error

I am using AP 1131, it working [ I am able to associate with laptop ], but in 7921 it show "connection failure error", any suggestion to troubleshoot this problem

If the laptop works, then could be a config issue on the 7921 or the AP country code is not supported.
What 7921 model do you have?
What authentication/encryption are you using?
What country code is being sent by the AP?
Refer to the 7921G Deployment Guide for the supported country codes.
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7921g/6_0/english/deployment/guide/7921dply.pdf

Failed to open the connection error using Business View OLE DB

I have a Crystal Report built on a Business View with the db being accessed by an OLE driver. Everything works fine using Crystal Designer, but when I try to access it through BOE I get the "Failed to open the connection" error. I have the ole drivers installed on the server.
We are on BOE 12.1.0.
The db is IBM as400.
Suggestions??

Ok so I spent the day trying to find the differences between the working and the non-working application. I began by adding code one piece at a time to the working application. The goal was to try and get it to break on the deployment server. I found the lines of code that is causing the break on the deployment server. Here it is:
    private void setReportParameters()
        try
            crystalReportDocument.SetParameterValue(0, reportUserName.Value);
            crystalReportDocument.SetParameterValue(1, reportArea.Value);
            crystalReportDocument.SetParameterValue(2, reportCDR.SelectedValue);
            crystalReportDocument.SetParameterValue(3, reportStatus.Value);
        catch (Exception ex)
            throw ex;
This sub-routine is called from my button click code and is used to set the parameters for the report. Once I added this to the working application it broke also. My goal here is to send the parameters to the report from a form the user is filling out. Please keep in mind this code works in Visual Studio 2005 and my local IIS server running on my development machine. It breaks on the target deployment server
The code broke on reports with sub-reports as well as report with no sub-reports. As soon as it was added and deployed the application through the "Failed to open the connection" error.
Thoughts?

I just bought a ipod touch. I am unable to use it because itunes tells me I have no internet connection (unknown error 306). I have tried all the suggestions I can find, including checking the firewall, the no proxy server is checked, resetting cache on i

I just bought a ipod touch. I am unable to use it because itunes tells me I have no internet connection (unknown error 306). I have tried all the suggestions I can find, including checking the firewall, the no proxy server is checked, resetting cache on itunes, I even scanned the computer with Registry Easy but nothing worked. I use Mozilla Firefox and have a PC with Windows 7. Obviously, buying a ipod and being unable to use it for 3 days (and counting) because I am unable to register it, is pretty frustrating. Can anyone help?

Did you try all of this:
iTunes Store loads partially or returns "Error 306" or "Error 10054"
Proxies, parental control settings and software, security or filtering software, or a bad iTunes Store cache can cause this.
To address proxies, Remove Internet Options proxy settings and connect to the Internet without a proxy.
To reset iTunes Store cache:
In iTunes, choose iTunes > Preferences (Mac) or Edit > Preferences (PC).
Click the Advanced tab.
Click the "Reset cache" button.
Click OK and see if the issue is resolved.
Adjust Parental Controls in iTunes:
Open iTunes.
Access iTunes preferences:
On a Mac: From the iTunes menu, choose Preferences.
On a Windows PC: From the Edit menu, choose Preferences.
Click the Parental Controls tab.
Remove restrictions on Parental Controls.
For more information on parental controls or content filtering software, see iTunes 10.5 for Windows: May see performance issues and blank iTunes Store.
For more information on other security software, see iTunes: Troubleshooting security software issues.

Failed to open the connection. Error in the Designer when copying ...

I have two different systems I am developing an application on.
I copy the entire directory from one system to the other. Both systems have the same environment:
Visual Studio 2010
Crystal Reports for Visual Studio 2010 (the production release, or I think it is the vesion is 13.0.2.0 is the version on the assemblies)
SQL 2008 R2
Today, I started adding Crystal reports to this VS solution. I have a reportdriver class that exports all the reports to an HTTP Stream, but we can sit that aside for now. The problem I am having is strictly with the integrated designer.
I have a bunch of existing reports written for an old Sybase databse. I have ported them to SQL and the table structure matches. I simply add the report to my project, point it to the new datasource (using "Set Datasource Location" - OLE ADO SQL) and then preview the report to be sure it runs.
I am just using "localhost" as my server name for the OLE connection so I...in theory... don't have to change the data source to view it on the other system. Both systems have SQL 2008 R2 installed locally. For my login credentials, I use SQL Security and use the same database login/password on both development machines andthe production server.
Today, I copied my entire project to the other PC (as I do almost every day).. When I open any of the reports (in VS) and try to preview them I get:
Failed to open the connection.
Details: ADO Error Code: 0x80004005
Source: Microsoft OLE DB Provide for SQL Server
Description: [DBNETLIB][ConnectionOpen (Connect().]SQL Server does not exist or access denied.
SQL State: 08001
Native Error: 17 [Database Vendor Code: 17]
I can only guess that I am using two different OLE ADO drivers on the two systems or there is something embedded in the rport or somewhere in my solution that "knows" I am not really on the same system that I initially set them up on and previewd them with.
Am I on the right track? Any idea how I can fix this? Obviously, I don't want to have to setup the datasource for every report in my application (if I do that, the report works) when I copy it from the development to the production server.
I am in a real bind here and under a fast aproaching deadline. Any help is much appreciated!!!
Shayne

Don't use localhost as your server name. It's a reserved name and should not be used in code.
Try this also [Kbase |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533353333333433363339%7D.do] SAP Note 1553469 - How to enable Database logging in Crystal Reports for Visual Studio 2010
Edited by: Don Williams on Jan 30, 2011 6:02 AM

Infoviewer Error - Failed to open the connection.

Hi,
I get the below error when tring to view a report from infoviewer?
Failed to open the connection. Products.rpt Details: [Database Vendor Code: 12154 ]
Also where can i find the log files for CMC and infoviewer?
Thanks in advance

Hi! I'm getting a similar error.
Re: 08004:oracleodbcoraora-12154: TNS: could not resolve the connect ....
Posted: Aug 22, 2011 5:56 PM in response to: John Fleming
Edit Reply
I am receiving a similar error.
Failed to open the connection.
Details: 08004:OracleODBCOraORA-12154: TNS:could not resolve the connect identifier specified Database Vendor Code: 12154
I've seen all sorts of discussion on the intertubes about possible fixes however, none stated are practical or they do not address my error specifically. I've exhausted resources on the net as well as those available to me.
I'm currently running SAP Crystal Reports 2011 on WIN7 64bit and using Oracle in OraClient 10g_home1.
Please let me know what insight you have. I cannot roll back to previous versions of Windows nor less encryption.
Thank you for your time.
Thank you, again, for your time.
Jeff Embree.

Error: Failed to open the connection

Hi all,
I have use Crystal Report 2008 to construct a report which access mySQL via ODBC. HOwever, I am fail to publish it to InfoView.
It always display the following error:
ERROR [PublishingService:HandlerPool-14] BusinessObjects_PublicationAdminErrorLog_Instance_2467 - [Publication ID # 2467] - Document job "Report2a.rpt" (id 2,475) scheduling failed: Failed to open the connection. ~tmp1356563301f0e10.rpt. (FBE60502)
My BOE(XI 3.0) is installed in SUSE Linux Enterprise 9 x86 and have tested the ODBC connection via isql and it can be connected.
Can anyone help to identify the problem? Or any procedure can be provided to publish the crystal report to InfoView.
Thank you so much.

Hi all,
I have use Crystal Report 2008 to construct a report which access mySQL via ODBC. HOwever, I am fail to publish it to InfoView.
It always display the following error:
ERROR [PublishingService:HandlerPool-14] BusinessObjects_PublicationAdminErrorLog_Instance_2467 - [Publication ID # 2467] - Document job "Report2a.rpt" (id 2,475) scheduling failed: Failed to open the connection. ~tmp1356563301f0e10.rpt. (FBE60502)
My BOE(XI 3.0) is installed in SUSE Linux Enterprise 9 x86 and have tested the ODBC connection via isql and it can be connected.
Can anyone help to identify the problem? Or any procedure can be provided to publish the crystal report to InfoView.
Thank you so much.

Error"Failed to open the connection" - Named Instance of SQL Server 2005

"Failed to open the connection" error, when connecting to the Named Instance of SQL Server 2005
The report is throwing error, when changing the logon information dynamically through C#.
Code
     string reportPath = @"D:\NET\TestReport\TestReport.rpt";
     ReportDocument reportDocument = new ReportDocument();
     reportDocument.Load(reportPath);
     foreach(CrystalDecisions.CrystalReports.Engine.Table table in tables)
          TableLogOnInfo tableLogonInfo = table.LogOnInfo;
          tableLogonInfo.ConnectionInfo.ServerName = @"TestServer\Instance1"; //Connnecting to Named instance of SQL Server 2005
          tableLogonInfo.ConnectionInfo.UserID = "sa";
          tableLogonInfo.ConnectionInfo.Password = "password";
          tableLogonInfo.ConnectionInfo.DatabaseName = "TEST_DB";
          table.ApplyLogOnInfo(tableLogonInfo);
     crystalReportViewer1.ReportSource = reportDocument;
Error Message
     Failed to open the connection.
     Failed to open the connection.
     C:\DOCUME1\PUGALE1\LOCALS~1\Temp\{DF9593A5-5C80-4CBC-ABC3-EC4EF204A7EB}.rpt
The error is occuring only whenever i am connecting to the Named Instance of SQL Server 2005.
Thanks in Advance
Edited by: pugalendran p on Feb 2, 2009 10:32 AM
Edited by: pugalendran p on Feb 2, 2009 10:43 AM

Hi,
Following solution might help you to resolve the issue.
Solution1:
Issue happens because universe connection to the Database is not responding and the Data Source Name is not configured to write SQL Server 2005 database.
Resolution
Created new DSN connection under SYSTEM DSN to SQL Server 2005 Database.
Import the universe from the designer.
Go to File->Parameters.
Edit Connection.
On the Database Middleware Page expand SQl Server 2005->Select SQL Server 2005 driver.
Change the DSN to new DSN connection
Test the connection.
Save the Universe and Export it to the repository.
Solution2:
I am taking Oracle as an example over here.
This can be caused when the SQLNET.ora is located in a remote location using mapped drives.
Resolution
To resolve,
check the registry [HKLM\SOFTWARE\ORACLE] you should see a folder called HOME0
look for any paths that contain a mapped drive partition
Change the mapped drive letter to a UNC path (
server\folder)
Open a command prompt and do a tnsping using the tnsname and verify the location of the SQLNET.ora or TNSNAMES.ora
If the path is not updated to the new path
Reboot the server
Regards,
Sarbhjeet Kaur

Getting Error:Failed to open the connection while calling crystal report

I am getting the below error while calling the crystal report from dot net app. I am using OLEDB to connect to database. It is working perfectly in our DEV environment but as soon as I move it to production information after changing the logon information in the report it start giving the below error.
Failed to open the connection.C:\WINDOWS\TEMP{C2FD97D9-2ADE-41BB-88FF-23A4DF20BC6F}.rpt
Details: [Database Vendor Code: 17 ]

Are you able to connect to the database from the production machine using a UDL file?
If you haven't tried this, here's how to do it. Take these steps on the machine that is hosting the application. Create a new text file on the desktop. Change the file extension to ".udl" (without the quotes). Double-click on this to bring up the OLEDB connection test: start on the Provider tab and select the appropriate provider. Click "Next" and on the following tab enter your connection information. Click the "Test Connection" button to test the connection. Does it connect to the database successfully?
If you click on "OK" to close the dialog and then open the UDL file with Notepad, you should see an OLEDB connection string. In this string should be the same property values for server, database, user id and password which you are providing through your application. If they are not the same, modify your application to use these values.
If testing your connection information with the UDL file works but your application is still failing when using the same credentials, try profiling or tracing the database. Do you see connection attempts from the application? Are there any errors?
If you're impersonating, have you set up windows authentication correctly for both the application and the database?

Error: Failed to open the connection when opening Crystal Report in CMC or

Hello all,
I am getting theError: Failed to open the connection when opening Crystal Report in CMC or Infoview
with access database as the datasource which is in the network drive.

Hi Sonali,
This is because Crystal Reports does not recognize database connection from share drive
1. Save the database locally on server machine
2. Create a new database on server and link the new database with the database on Network.
Steps to link the database.
1.Create a new test database on server.
2. Go to File --> Get External Data --> Link tables | Select the database on Network Drive.
3. Select all the tables from the database.
4. Save the Database e.g. Test.mdb.
5. Create an ODBC Connection on server machine, with the same name as on client machine using test.mdb database.
Note: Click on Advanced button, enter the default user id and password for the odbc connection, it is not mandatory to give Login Name and Password, only if the user id and password are given then we need to provide the same user id and password in the CMC database configuration.
6. Create a report using this ODBC connection, and save the report to Enterprise.
Regards,
Navin

Problem: Failed to open the connection. Error Code 0x800002F4 (-2147482892)

Problem: Failed to open the connection. Error Code 0x800002F4 (-2147482892)
This is on two (2) separate machines. These are NEW INSTALLATION development work stations (laptops). One is Vista (Visual Studio 2008 / Crystal Reports 2008), and the other is Windows XP Pro (Visual Studio 2003 / Crystal Reports XI R1).
I am using EXISTING CODE (established over several years), and EXISTING REPORTS (established over several years). Old development station was XP Pro, as above, and still exists, and still works fine.
I can open the report in Crystal, and see the results just fine. Data for the report is obtained via ODBC.
Can someone identity the actual error by the Error Code above, and advise. Thanks You in Advance.

Ok, so let's start at step 1:
SP 1 just released and I'd recommend applying that. The SO is available from here:
https://smpdl.sap-ag.de/~sapidp/012002523100010503722008E/cr2008_sp1.exe
For future reference, msm matching the above SP is here:
https://smpdl.sap-ag.de/~sapidp/012002523100011715292008E/cr121_mm.zip
and msi is here:
https://smpdl.sap-ag.de/~sapidp/012002523100011722132008E/cr121_redist_install.zip
Step 2: a few questions:
a) I am not sure what CR SDK you are using; RDC, .NET? I suspect that you are using the CR assemblies for .NET, but do confirm.
b) what is the database you are connecting to?
c) is this a web or a win app?
Step 3: As the error can mean any number of things (to me it's just means something went wrong during the attempt to connect to the database...), the solution may vary, however the troubleshooting steps remain quite consistent:
1) Do make sure the report is indeed working in the CR 2008 designer (e.g.; make sure "saved data" is not enabled.
2) Try a simple new windows app with one of your reports. See if you have a report with no subreports and use it
3) If that works, use a report with subreports
4) If the above does not work in (1) above, create a new report to the same ODBC connection, do not code any database connection - let the report prompt for the logon parameter (PWD)
5) Run the new report in your new app, enter the PWD when prompted
6) If this works, add your database logon code
7) If that works, add your original report (again, preferably with no subreports)
8) If that fails, ensure that the subreport and main report use the same database connection type (ODBC)
9) If it works, see if you can determine the difference between your old app and the new app.
Ludek

I am a OS10.7.4 user. yesterday i bought a Lacie external hard disk but error message appear said " You cant open the applicant LaCie setup assistant because PowerPC applicants are no longer support". please help me how to connect my mac with Lacie??

i am a OS10.7.4 user. yesterday i bought a Lacie external hard disk but error message appear said " You cant open the applicant LaCie setup assistant because PowerPC applicants are no longer support". please help me how to connect my mac with Lacie??

You do not need the Setup Assistant; in fact, you do not need any software on an external hard drive. I have two LaCie's; I erased the drive as soon as I plugged it in. You will need to format it anyway because most hard drives come Windows formatted. So, if you only want to use it with the Mac, highlight it in Disk Utility and choose Mac OS Extended (Journaled) as the format and the GUID Partition scheme under Options. While doing that, it will erase the drive (and get rid of the LaCie software) - once finished, your drive is ready to use for Time Machine or any other backup plans you have for it.

Am not able to use facebook on my Iphone 4, softwareversion:iOS7.1, also tried to access through safari and chrome that i have installed it gives an error message saying: "safari could not open the page because server stopped responding",

Am not able to use facebook on my Iphone 4, softwareversion:iOS7.1, also tried to access through safari and chrome that i have installed it gives an error message saying: "safari could not open the page because server stopped responding", i tried network reset, reset the whole device, rebooting , changing airplane mode rebooting nothing fix the issue, but i can access other sites and google , am using Vodafone as my carrier with 2g network, when at home able to access facebook.com through wifi in safari requesting assistance thank you

If you can access Facebook while on Wifi at home, but you are unable to access it while away running on your carrier's 2G network, I could phone your carrier. You have already completed the Cellular Data troubleshooting for the iPhone, so any limitations keeping your from connecting to Facebook over cellular will have to be answered by your carrier.

Haveing problems with Safari. It gives me an error message. Safari can't open the web page, because it can't establish a secure connection to the server. It only seams to have a problem on https sites. Any help would be apreciated.

Safari keeps giving and error message. " Safari can't open the web page( insert web page here) , because it can't establish a secure connetion to the server.
It only seams to have a problem with https sites.
Any help would be appreciated

The "s" in "https" indicates the site is a secure server--usually a site that will require a password. Connections to secure servers can be blocked by parental controls. Are you using any parental controls, either through OSX's settings (in System Preferences) or third party parental control software (such as Netnanny)? If so, check the settings to make sure they will allow the connection.

An error occured while opening the connection: Object reference not set to

After I uninstalled Oracle Developer Tools for Visual Studio .NET 10.1.0.4 and installed Oracle Developer Tools for Visual Studio .NET with Oracle10g Release 2 ODAC 10.2.0.2.21 I got the error message below when I want to connect to my 10g database using Oracle Explorer.
Error:
An error occured while opening the connection: Object reference not set to an instance of an object
I use OracleConnection to open also cannot be done. But I use Oracle SQL Developer I can connect to orcl that I cannot connect using ODAC 10.2.0.2.21 in my laptop.
Please help me.
Ming Man

Sorry my mistake, I double checked, the one I uninstalled is ODAC 10.2.0.2.20 and not ODAC 10.1.0.4.
But I have that error.
Ming Man

TDS Connect Failure Error 17832 - Login Packet used to open the connection is structually invalid

Similar Messages

Maybe you are looking for