TDS Documents are missing for Challan creation

Hello Experts,
When we go for creation of Challan using Tcode: J1INCHLN, few documents are not appearing in the open item list, but the same documents are coming in J1INMIS report.
Please provide you input, what will be the cause for missing of documents.
Thanks,
Ratnam

Hi Ratnam,
Please check in table With_item, if for the missing documents, the field CO and OT (Receipient Type) are updated or not. Id it is not updated, it will not show in J1INCHLN.
Even if you have vendor master updated with this field, if at the time of document posting , if these fields were blank, then this would not get picked up in J1INCHLN.
You may also refer to the consulting note 1465529 which is released for J1INCHLN FAQ's
Regards,
SAPFICO

Similar Messages

"Documents are missing" - what is to be done?

Hello,
we receive this messge in the report of ta. ucwb "Analysis of transaction data" (Tools -> Transaction data -> Analyze and repair data streams -> Compare journal entries with totals records -> Display details):
Some documents are missing for certain totals records. This can have the following causes:
Translation to group currency is selected in the customizing settings for the document type. Furthermore, the document type posts in group currency and at least one more currency.
Translation to group currency is NOT selected in the customizing settings for the document type. However, instead of posting in group currency, the document type only posts in the local and transaction currencies.
Totals records contain values in group currency only. A typical cause is that the currency translation function, which only works with totals records, has created these values during translation and/or rounding. This is NOT an error.
Although it might be not an error - are there any arrangements to be made?
Regards
Martin Lehmann

Hello Dan,
this was exactly the case!
We have documents which were posted in RUB and were written to the document ODS and the BCS cube. So the values are consistent in transactional currency.
When the totals records were computed a posting with local currency was created with the same allocation as the original record. Additionally a record was created for the currrency difference of the average rate of exchange and the period-end exchange rate. These sentences have local curr. equal 0 and trans. curr. n.e. 0 and were reported...
Many regards
Martin

Why PDF documents are missing icon of standard size?

Hello,
My Adobe Reader is v11.0.6. It was originally installed on Win XP Home and worked OK.
Recently, I've moved it to Win7 Pro with the aid of Laplink PC Mover. It works OK, but PDF documents are missing its standard size icon, e.g. on Desktop. Precisely speaking, my closed PDF documents display as their icon the first page of the document with almost invisible miniature of PDF icon in its right lower corner.
I tried to take care of it with re-association and re-choosing right icon. This corrected the situation for a few seconds only.
I repaired the Reader installation also with the same effect.
The icon chosen is located in: C:\Windows\Installer\{AC76BAB6-7AD7-1033-7B44-AB0000000001} \PDFFile_8.ico. It's of 256x256 pixels
Why this happen? How can one repair it?
Andy148

Open Windows Explorer -> Tools -> Folder Options
Go to the View tab
Check "Always show icons, never thumbnails"
Hit Apply
All your PDF files on your desktop should now show with the generic PDF icon.

Documents are marked for indexing but indexing is not happening

Hi All,
I have completed the configuration of Trex 7.10 ; and also I have tested the settings by executing the report "RCF_CHECK_SEARCH_SETTINGSu201D in SE38 and found no errors, but the problem here is documents are marked for indexing but not getting indexed.
I need some help to resolve this issue
Regards
Siva

Hi Siva,
This should help http://wiki.sdn.sap.com/wiki/x/gQ8oCw

After a rebuild/repair of my photo library thumbnails are missing for RAW images.

Every few months I rebuild my iPhoto library to make sure the database stays clean and up to day. This time was different though - after the rebuild/repair of my photo library thumbnails are missing for all RAW images (Canon). Images from other cameras and jpegs are all fine. Only the events with Canon RAW images have no thumbnails.
I am rebuilding the thumbnails once again but has anyone else seen this issue? Losing thumbnails to RAW images during a rebuild?

Every few months I rebuild my iPhoto library to make sure the database stays clean and up to day.
There is no need to do this. It doesn't achieve anything.
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to rebuild the thumbnails. It can take 3 or 4 goes for this to work

Cost and/or Conversion Rates are missing for some planning resources

Hi,
In Workplan of projects, we are facing a issue "Cost and/or Conversion Rates are missing for some planning resources". even though the schedules for the project WP is defined.
Any inputs on this is highly apprciated. Thanks !!!
Regards,
Pallavi

Did you check the Cost for all the Planned Workplan Budget Lines. Generally, this type of error comes when the Quantity is defined but the Cost is missing for any Line. Find that Planned Workplan Budget Lines and enter the Cost for them and save it.
I hope it may help you.
Regards,
Khan.

Important global parameters from Financial Accounting are missing for Asset

Hi friends,
When I'm trying to assign CHN Chart of Depreciation to c.Code 0319 the below error message is giving by SAP Sytem. This Chart of Depreciation is already 4 C.codes are using.
Could you pleasea provide the detailed procedure...
Error Message is:
The result of the check of company code 0319 shows that important global parameters from Financial Accounting are missing for Asset Accounting.
One or more of the following fields are affected:
Currency
Chart of accounts
Fiscal year version
Input tax indicator for non-taxable transactions
Thanks,
shafi

Hi Shaik,
The solution is in the error message itself i.e
Input tax indicator for non-taxable transactions
Firstly you have to create tax codes for non taxable transaction in TR Code FTXP for the respective company code.
Secondly you have to assign these tax codes to your company code in TR code OBCL and save
Then You can proceed and do the assignment of Chart of Depreciation to the Company code.
I think this will solve the problem.
Regards
Pratiksha
*Please assign points if helpful

I keep getting the message that my registry settings are missing for importing and burning cd's and dvd's. Why?

I keep getting the message that my registry settings are missing for importing and burning cd's and dvd's. Why?
I've completely uninstalled iTunes per the support instructions and reinstalled. But I still get the error message each
time I click on the iTunes icon. I went into iTunes support and searched for registry settings and got an error message 404.
It was no help.

Hey JWeaver208,
Thanks for the question, and great troubleshooting so far. If you continue to see this message after uninstalling and re-installing iTunes, you may need to install the device filter in the Windows registry, as outlined in this resource:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299
Thanks,
Matt M.

My iTunes is telling me that the registry settings are missing for importing and burning cd's and dvd's and to reinstall. I do reinstall and it is still not there and I have at least 4 times.

My iTunes is telling me that the registry settings are missing for importing and burning cd's and dvd's. I have installed the latest up as well as uninstalled and then reinstalled a few times, at least 4. The registry settings are still not there and I cannot burn to a cd. HELP!!!

To fix registry, refer to this article:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299

Some PDF Documents are Missing Letters when Printing

We use a Windows Server 2008 R2 Enterprise (64-bit) server as our print server. Ever since we moved our printers to this server, several of our existing PDF documents have missing letters when they print. If you modify your print properties and choose "Print as Image", the documents print correctly with no missing letters.
The missing letters seem to come in specific combinations, such as ti, ft, fa, etc.
Our previous print server was a Windows Server 2003 (32-bit) machine and these documents all printed fine on that server.
Are there any known issues with printing PDF documents on a 64-bit print server, or with 64-bit drivers?
Thank you for your time,
Jason

This response will hopefully help you towards a solution—I have not encountered the specific problem you are facing.
The image you posted shows the fonts that are embedded in your document: both Calibri and Myriad Pro. However, the second instance of Calibri indicates that some some of the Calibri characters were encoded differently, and I suspect based on the combo characters you listed, these are glyphs and are what your printer is having trouble processing.
The usual solution for print server issues is to make sure all drivers and firmware are updated.
The answer to your question regarding embedding fonts completely is to change your Adobe pdf print preferences to embed all fonts, not just a subset. This must be done when the pdf is being created initially. You can change font embedding by choosing a joboption like Press Quality that includes full font embedding or by modifying the joboption you are already using. In Windows, you can do this at the time of print by selecting the Advanced button next to the printer selection dropdown and changing settings there, in advance by modifying the printing preferences from your printers menu, or by editing the joboptions in Acrobat Distiller.

FIAR : Some Documents are Missing of Type 'DZ'

Dear All,
I was validating AR - Days Overdue Analysis and found that there are few documents with Type 'DZ' are missing in my BW - Datasource (0FI_AR_4) Production system for few customers.
I have tried lot in sdn but didn't get proper information as there is no issue in my Quality System.
Both Producion & Quality System are on Same patch level.
I really appreciate for your quick reply.
Regards,
Rishit

Hi,
Only docs that will not be available in AR extractor are documents not linked to Customers that is Customer not populated. But DZ should have one.
Are they missing in the extractor or in BW? Have you tried RSA3 in source system?

Open Document Icon Missing for PO Reqs but working for POs

Hi All,
If there are POs and PO requisitions that are awaiting for your approval. You would typically go to Purchasing super user -> Notification Summary -> Worklist choose po/poreqs -> click Open document link to view/make changes prior approving.
The Open Document Link is woking when you open POs but missing for PO Reqs. I went through many docs such as (Metalink doc 356969.1). But unsuccessful. I am think it’s some sort of setup/configuration/profile that needs to be changed.
My Problem is to get the missing Icon for PO Reqs too. Does anyone has info please help me. I dont even know where to look for. Any help is greatly appreciated.
Thanks,
Kalyan.

what is the access level and security level for purchase requisition document

The billing document are blocked for accounting release because of VPRS

Hi All,
Can anybody help me out
In PRD we changed the pricing procedure xccc66and we insert the condition type VPRS as mandatory condition. The billing documents created with reference to orders without VPRS (created before the change) are blocked for accounting because the condition VPRS is missing. We tried to run any pricing re-determination in the billing document but the system does not determine the VPRS.
In the new orders, created after import all, the system determines the VPRS condition correctly.
Can you please advice how to insert VPRS? I mean the correct procedure in order to re-determine the VPRS condition in billing documents.
Thanks,
Siddhartha

we changed the pricing procedure xccc66
If you have changed the pricing procedure itself instead of inserting the VPRS condition type in your existing pricing procedure, no it is not at all possible to insert this condition type to your billing documents. You have to cancel all those billing documents.
On the other hand, if you have inserted this condition type in your existing pricing procedure, then I think, you can, by clicking the update button, can insert this condition type which I am not sure.
thanks
G. Lakshmipathi

Visual Studio 2013 Pro - Winforms toolbox icons beside items are missing for some 3rd party vendors controls

I noticed last weekend after installing VS 2013.4 update that the Winforms toolbox, while showing all items, did not display the icons beside the items for any custom/third party Winform controls. The only icon
showing in the toolboxes are the Pointer icon. I can select and drop any control onto a project, and as soon as I move mouse into the design surface the icon shows. Neither the
builtin Winforms controls nor the WPF toolbox exhibit the same symptom. It is specific to Winforms third party controls (ActiPro and DevExpress). At first I thought it was due to the update, then I found that my laptop was
already exhibiting this symptom, running 2013.3 (I had not dropped any controls from the toolbox in the past few weeks so I did not notice).
The two machines (laptop and workstation) are running Windows 7 64-bit Professional and Ultimate, respectively. These machines are dedicated to development, and are secured, also running Norton Antivirus.
I also have VS 2010 and VS 2012 which don't exhibit the symptom, though I finally removed 2012 last night during my adventures. I had all three VS side by side, running well for months (I added VS 2013 in June). VS
2013 had been functioning well on a daily basis for the dozen or so Winforms projects and the odd WPF or MVC project.
I use DevExpress v2014 and ActiPro controls; I have been using them for years now.
I've spent 2 days trying remedies that include:
Resetting Toolbox
Removal of *.spd files in %APPDATA%, restarting VS
Uninstall Visual Studio, remove and delete of any Visual Studio remnant in the registry, Program Files(x86), %APPDATA% and %PROGRAMDATA%, reinstall.
Repeat step 3 with VS 2013.1 and .3
Downgraded .NET to 4.5.1 to match my third, correctly functioning computer (also running Windows 7 x64 Ultimate).
DevExpress has told me this isn't a problem they have seen. At first I agreed, since my ActiPro controls also are missing their icons, but then I noted that other vendor controls display fine. Not sure what else to do but to nuke the workstation and install
from OS up.

DevExpress is discussing this issue in the thread here : https://www.devexpress.com/support/center/Question/Details/T174133#comment-a98eedf1-ca54-4920-a2d6-49506ddae5b5
The small sample they provided in the thread actually reproduces the bug in my environment.
Since I cannot post screenshots here on MSDN forum (I explained above, when I try to attach pictures I
receive an error that my account is not verified). There is nothing more I can do.
This appears to be a bug in Visual Studio 2013. VS 2010 and 2012 are on the same machine and do not exhibit
the problem. It is frustrating how unresponsive Microsoft is to my issue. I am a long-time MSDN subscriber, as well as customer of multiple seats of the retail copies of Visual Studio. It looks like the only way to get attention is to pay for a incident. If
Microsoft is interested in actually seeing this bug in action, I have 2 machines that are preserved. I have installed a fresh environment on my backup PC.

Predefined tasks are missing for Workflow in ECC 6.0 ehp4

Hello Team,
I am trying to activate the WF for PR item level, but getting error messages as shown in the screen shot. Looks likes some standard tasks are missing. So, How can I activate or configure this? Please Advise.
Thanks & Regards,
Sushma

delegation is how you enhance workflow object, you create a z sub object and delegate it back to the standard object, any new attributes methods and events created for the z object will be available for the standard object.
Extending Object Types: Inheritance and Delegation (SAP Library - Business Task Management)
As for the missing tasks, this is a bit strange since this is a standard workflow, check SE03 and see that no one deleted them by mistake (the type is PDTS) if so maybe do a client copy. I don't think that you can copy the standard tasks directly. but you have a few options:
create new tasks based on the same methods and recreate the workflow (this is not a complex workflow)
copy the tasks in the other systems to new ones and transfer the copied tasks to your system. copy the workflow as well.

TDS Documents are missing for Challan creation

Similar Messages

Maybe you are looking for