TDS in MIRO transaction
Hi,
I have prepared MIRO with TDS. So entry has generated like:
Expense Dr. 1000
TDS Cr. 10
Vendor Cr. 990
After that I have deposited the TDS entry by creating challan and ultimately this has become clearing entry.
After this due to some errors, I have reversed MIRO transaction. There I found TDS entry has also got reversed without asking for resetting the TDS entry.
Now my client needs the system to be highlighted for resetting the TDS entry before reversing MIRO transaction. Please tell me configuration steps.
Babjee
Hello,
I am not expert in Patches but we have tried a validation of the error message for vendor invoice in our old company and it worked well for both MIRO and FB60.
Please work on this and it will be realy helpful for you
Best Regards
Similar Messages
-
HAI,
CAN ANY ONE TELL ME THAT IN CASE MIRO TRANSACTION I AM GETTING THE INVOICE DOCUMENT NUMBER WHILE SAVING , BUT WHILE SAVING THER IS ONE MORE FI REFRENCE NUMBER HOW TO GET IT ,PLS HELP
CHEERSHi,
I think you are trying to get the FI document that is posted from the MIRO document.
You can use the FM FI_DOCUMENT_RECORD passing RMRP to i_awtyp, MIRO document number to i_awref, correct financial year to i_aworg, and correct company code to i_bukrs.
Hope this helps..
Rajendra Salecha -
Line Item Value change in MIRO Transaction
I have one requirement i.e as follows.
<b>Line Item Value change in MIRO Transaction</b>
After getting the items in table control of the miro screen of a particular order.
I have to clicked on edit own condition of selected item.
then it will show another screen ( create invoice document item - conditions)which have the all condtions details like
Fra1 , frb1 , sd% , Penalty % , gross price , frieght charges etc.
In this screen first time it is showing line item as
in the miro intial screen i.e. if u click po item
10 it will show 10 only.
after updating fra1 value , i came back to the main screen at that time it is asking that select the any one of three.
after selecting manual selection its fra1 was changed.
once again if i go to the same line item by clicking
the edit own condition(13 column if u select all information in textbox whixh is above tablecontrol right corner) it is showing line item as 1 in screen ( create invoice document item - conditions) which should be line item as 10. ( here i took line item as 10)
Please clarify this, why it is showing
first time as a original line item and
after updating it is showing like
for line item 10 -
1
20 -
2
100 -
10
110 -
11."...it does not work..." is probably the worst description of a problem you can imagine. As an application developer you should know that. Do you use firebug to see what happens once it "does not work"? Any better hints?
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.apress.com/9781430235125
https://apex.oracle.com/pls/apex/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
------------------------------------------------------------------- -
Posting of invoice with no reference to a PO from MIRO transaction
Dears,
I'm wokring on a SAP R/3 4.6 release and I would like to know if it is possible to post invoices with no PO from MIRO transaction. If it is so would it be possible for you to let me know which are the customizing steps to undertake and/or the fields to be populated in the MIRO transaction.
I know that this kind of invoices should be processed throught transaction FB60 but in this case the use of MIRO transactino is required.
Thanks in advance for the help.
DavideHi Davide,
You have first to fill in the header the tab basic details and then in the tab Details "Inv.Party"
Now you can go to the tab G/L account.
With a PO the system take the vendor from the PO now you have first to fill the vendor number
Paul -
hi,
I am getting following error in MIRO transaction ....Can anybody please fix this ?
"In company code 3000, the number range 51 is missing for the year 2008"
Regards
VijayHI,
Please check the nuber ranges whether that has been selected as external for the Invoicing.
If external then please check whether the said no range starting from 51 is included in the external no assignment or no?
If not then yiu may have to add the same no range and then check.
Hope this helps.
Regards,
Prasanna
Award pls if helpful. -
Problem with MIRO Transaction while posting Un planned Delivery cost
Hi all,
We have entered all the details including unplanned delivery cost in transaction MIRO. When we are trying to post the same by using post button directly with out simulation, system is asking for plant details.
For first time we have entered wrong Plant details , system immediately asking again for plant details.
Next time even if we entered correct plant details, the system is coming out from the screen MIRO and it is not posting the document.
If you go through simulate button and it is working fine and it is giving Warning message, If we enter the wrong Plant details.
My Client requirement is If we post the MIRO transaction including Un planned delivery cost with Post button. If we enter wrong plant details. System will through Error message, until we enter the correct plant details.
Is there any way to do this. Pl help me in this regard.
Regards,
RameshIn the MIRO T Code, U can see PO reference tab is there, Just below it there is Purchase order/scheduling agreement field is there . enter the purchase order number in blank field next to Purchase order/scheduling agreement and press enter. U can see it will take the required data automatically.
hope this helps
regards -
MIRO Transaction not allowing Payment Terms Change
Is there any settings that would prevent a user from changing the payment terms adopted from the purchase order when doing MIRO. Problem we are having is the payment terms cannot be changed in MIRO, we cannot change the Terms Key but can change the days and discount, which leads to my next problem, we are getting MIRO transactions that have a different term than the purchase order and vendor master, so the problem isnt a user making this change. Any ideas?
Hi,
I had same problem.
Go to MIRO. Before entering the PO or anything just change the currency and press enter. THen enter the MIRO details. It should work.
PLease award points if helpful
thanks
Adeel -
User exit/BADi to change the header text in MIRO transaction
Hi all,
I am searching user exit or badi to change the header text in MIRO transaction.
My requirement is, before post the invoice I need to populate the vendor name in Header text field(MIRO -> Details tab -> header text field ). I have tried all the user exits and BADi's related to MIRO. Doesn't work. If anybody knows please share.
Thanks,
PranavTry BADI INVOICE_UPDATE.
If you are in system version is ECC 6.0, you can find out a Enhancement SPOT (ES_SAPLMRMC) under Function module MRM_FINAL_CHECK, which can be used to perform this requirement
Hope this helps.
Thanks,
Balaji
Edited by: Balaji Ganapathiraman on Mar 14, 2008 4:43 PM -
Change of Vendor Master Re-con Account in MIRO Transaction
Hi Friends.
Thanks in Advance,
Requirement : While Posting the MIRO Transaction, Vendor Master Re-con Account has to be Replace by other Re-con account
Using Business Transactions Events this can be achived and sucessfully replaced. also data based Tables BSEG also updated sucessfully.
But the problem is when viewing the reports like FAGLL03, FAGLB03 we can able to view the data against that G/L Account.
Regards:
Sridhar.JHi Sridhar,
Let me know what is the business requirement to assign separate GL account while doing MIRO ? Which BTE used for that ? If you don't mind.
Rgds
SumaMani -
Adding Multiple Vendor Invoice at time MIRO Transaction
Dear Experts,
I am facing a problem whereby the users want to to add hundreds of Vendor Invoices and there corressponding date when at the time of MIRO transaction.
Currently in standard there is only one field for the Vendor Invoice No and Vendor Invoice Date.
Please advice as if how to give the provisions to user so that they can enter multiple(20 or 30) vendor invoice no and corresponding vendor Invoice dates at time of creation MIRO Invoice.(T-Code : MIRO)
Many Thanks In Advance.
NINANHi,
For invoice verification of one vendor with many inovice at the same time in MIRO, select vendor insted of Purchase order / Schedukle agreement after selecting vendor , then click on more allocation criteria, after that a new pop window will open enter the plant and vendor code and click on adopt then system will select all the PO for which invocie verification is not done then select all the invocie u want to proceed,
Hope this will solve your rpoblem.
regards,
zafar -
Dear All,
I have to Change the Base Line Date in MIRO transaction with the GR Posting Date while booking the Incoming Invoice..i.e BSIK-ZFBDT date i have to change it with MKPF-BLDAT...
I have tried all of the UserExits for MIRO transactions. but did not work...
Can any body tell me any alternate way.e.g BADI or something..
Regards,
RushikeshHave a look at below code which lists BADI for particular tcode. It might help you.
*& Report ZBADI *
REPORT zbadi .
TABLES : tstc,
tadir,
modsapt,
modact,
trdir,
tfdir,
enlfdir,
sxs_attrt ,
tstct.
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
PARAMETERS : p_tcode LIKE tstc-tcode,
p_pgmna LIKE tstc-pgmna .
DATA wa_tadir TYPE tadir.
START-OF-SELECTION.
IF NOT p_tcode IS INITIAL.
SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
ELSEIF NOT p_pgmna IS INITIAL.
tstc-pgmna = p_pgmna.
ENDIF.
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name EQ enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
SELECT * FROM tadir INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object IN ('SMOD', 'SXSD')
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(105) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
SORT jtab BY object.
DATA : wf_txt(60) TYPE c,
wf_smod TYPE i ,
wf_badi TYPE i ,
wf_object2(30) TYPE c.
CLEAR : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT jtab INTO wa_tadir.
AT FIRST.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Enhancement/ Business Add-in',
41 sy-vline ,
42 'Description',
105 sy-vline.
WRITE:/(105) sy-uline.
ENDAT.
CLEAR wf_txt.
AT NEW object.
IF wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
ELSEIF wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
ENDIF.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 sy-vline,
2 wf_object2,
105 sy-vline.
ENDAT.
CASE wa_tadir-object.
WHEN 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE modtext INTO wf_txt
FROM modsapt
WHERE sprsl = sy-langu
AND name = wa_tadir-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WHEN 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
SELECT SINGLE text INTO wf_txt
FROM sxs_attrt
WHERE sprsl = sy-langu
AND exit_name = wa_tadir-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
ENDCASE.
WRITE:/1 sy-vline,
2 wa_tadir-obj_name HOTSPOT ON,
41 sy-vline ,
42 wf_txt,
105 sy-vline.
AT END OF object.
WRITE : /(105) sy-uline.
ENDAT.
ENDLOOP.
WRITE:/(105) sy-uline.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
DATA : wf_object TYPE tadir-object.
CLEAR wf_object.
GET CURSOR FIELD field1.
CHECK field1(8) EQ 'WA_TADIR'.
READ TABLE jtab WITH KEY obj_name = sy-lisel+1(20).
MOVE jtab-object TO wf_object.
CASE wf_object.
WHEN 'SMOD'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
WHEN 'SXSD'.
SET PARAMETER ID 'EXN' FIELD sy-lisel+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Best Regards,
Vibha
*Please mark all the helpful answers -
User exit/BADi to populate the header text in MIRO transaction
Hi all,
I am searching user exit or badi to populate the header text in MIRO transaction.
My requirement is, before post the invoice I need to populate the some text in Header text field (MIRO -> Details tab -> header text field). I need to populate this field in the MM document as well as FI document (Accounting Document). I have tried all the user exits and BADi's related to MIRO/MRRL. Doesn't work. If anybody knows please share.
Thanks,
Santosh
Edited by: Santosh Ghonasgi on May 13, 2010 4:48 PMHello santosh,
I am not sure whether a suitable exit / BADI exists to update the header text in MIRO directly.
there is one related forum:
User exit/BADi to change the header text in MIRO transaction
Hope, it may helpful for you to proceed with some other parallel solution.
Regards,
Selva K.
Edited by: Selvakumar Krishnan on May 13, 2010 5:29 PM -
Required help for badi for GL tab in MIRO transaction
Hi,
I am working in MIRO transaction.
I am having a requirement as below:
While creating invoices, In the gl tab when we enter gl account number system should populate Tax jurisdiction code by default.
I am using BADI EXTENSION_US_TAXES method MM_ITEM_TAX_MODIFY but it populates the tax jurisdiction in PO reference tab not in GL tab.
Please advice
Regards,
Suvarna NandiHi
Have you tried with enhancement FYTX0002? See also Note 302998 - Collecting fields for user-exit. It's an idea.
I hope this helps you
Regards
Eduardo -
Regarding GL item tab in MIRO transaction
Hi
I am working on MIRO transaction.
In GL Item tab, if we enter Account number it has to be
checked with ZMMTABLE and display error if not available.
In Ztable we have company code, account number(SAKNR) and ZFLG as key.
need to fetch by key.
How to fetch company code and account number from screen?
I am using BADI INVOICE_UPDATE, CHANGE_AT_SAVE method.
WHen i clic save button in MIRO transaction, the BADI is not triggered.
I have implementation active and made break point too.
I tried displaying invoice document in MIRO , changed the amount and clicked save button. but BADI is not triggered
Can you tell me how to debug bad? i put break point in BADI method and opened session then execute MIRO.
Pls advice how to go with.
Regards
Chandra
Edited by: princeck on Sep 20, 2011 3:14 PM
Edited by: princeck on Sep 20, 2011 4:11 PMHi
I want to access GL item tab account number from MIRO transaction to BADIINVOICE_BADI Method CHANGE_AT_SAVE. I entered the account number in GL account tnumber tab. but parameter TI_RBCO_NEW-BUKRS & TI_RBCO_OLD-BUKRS values are empty inside BADI method.
Can you suggest me how to find this.
Regards
Chandra
Edited by: princeck on Oct 3, 2011 2:32 PM -
Make purchase order lineu00B4s posting date visible from miro transaction
I have tried to add purchase order line´s posting date from "spro-Materials Management- Logistics Invoice Verification-
Incoming Invoice- Maintain Item List Variants" but I can´t.
Is it possible?
Thanks in advance.I just checked and you're right. Amazing the posting date isn't included as std.
This might help, you'll need a development.
Screen Exit for MIRO transaction
(If you want a screen variant based on existing available use tx OLMRLIST)
Regards
Maybe you are looking for
-
Unable to access the AdfLibraryJar bindings
Hi All,a I am using Jdeveloper 11.1.14.0, I have ADF Application and if i run this application it is running fine with out giving any errors. For this application i have created AdfLibraryJar and placed in the local file system. I have Webcenter appl
-
Assigning Values to Drop-Down Lists
I am populating a drop-down list with values of vendor names from my Oracle table. However, I'm assigning the vendor name as the value for each <option> record displayed in the drop-down list. The problem I'm having is that when I select a vendor nam
-
Apple/Mac/OS X icon in dock
This is as weird as they come a question - I somehow poofed my apple os x icon away into computer heaven a while back and would like to get it back into the dock - that's that icon on the far right side of the dock - I've looked everywhere for the ic
-
Hi everybody, I've wondered if there is a possibility to integrate OMR (optical mark recognition) function from Adobe Live Cycle Production Print ES into Live Cycle ES. kind regards Michael
-
Iphone 3G in Mercedes E class ( 211 )
Is there a cheaper solution to get my iphone connected to the car audio system then the 750€ proposal from Mercedes? They want me to buy a phone cradle, a special cable plus an adapter. Just wanna listen to the music on the car stereo in a better qua