TDS J1INMIS report error
Hello Experts,
We are executing J1INMIS report in ECC 6.0, few documents are not coming in the report for certificate printing.
We have updated challan number and bank challan number for those documents still problem is continuing.
Please advice what will be the reason for the same.
Thanks in advance!
Regards,
Ratnam.
Dear All,
I am adding one more point for your information
The external challan no is not being updated in J1INMIS report for the Invoices posted in the month of March.
TDS Invoices posted in the month of March fiscal year 2009 and TDS payments were posted in the month of April Fiscal year 2010.
Please let me know is this the reason, If two fiscal years involved in this transactions for the external challan no is not being updated in J1INMIS report?
Thanks,
Ratnam.
Similar Messages
-
Down Payment entries not reflecting in J1INMIS report
Dear Guru's,
TDS deducted at the time of down payment made to vendor is not reflecting in J1inmis report.
Is J1INMIS report does not reflect down payment entries?
What will be the reason for this?
Which alternative report to followed for J1INMIS !!!
Waiting for your positive reply.
Regards,
Sany.Hi Sany,
To update Business Place & Section Code, execute the program given below. After execution of the program run T.Code J1INPP and your issue should get resolved. Let me know if this works.
Ask the Abaper to write the following Code & execute the program:
REPORT ZFI_BUP_SEC_CHANGE.
TABLES : BSIK,BSAK,BSEG.
parameters: PA_BELNR TYPE BSEG-BELNR OBLIGATORY,
PA_BUKRS TYPE BSEG-BUKRS OBLIGATORY,
PA_GAAHR TYPE BSEG-GJAHR OBLIGATORY.
PARAMETERS : PA_BUPLA TYPE BSEG-BUPLA NO-DISPLAY,
PA_SECCO TYPE BSEG-SECCO NO-DISPLAY.
PA_BUPLA = 'MUM'. (Note : Use the Business place & section Code Used
PA_SECCO = 'MUM'. in your company code).
START-OF-SELECTION.
PERFORM CHANGE_DATA.
END-OF-SELECTION.
*& Form CHANGE_DATA
text
--> p1 text
<-- p2 text
FORM CHANGE_DATA .
DATA : LT_BSEG TYPE TABLE OF BSEG WITH HEADER LINE,
LT_BSIK TYPE TABLE OF BSIK WITH HEADER LINE,
LT_BSAK TYPE TABLE OF BSAK WITH HEADER LINE.
BSeg updation
SELECT *
INTO CORRESPONDING FIELDS OF TABLE LT_BSEG
FROM BSEG
WHERE BUKRS = PA_BUKRS AND
GJAHR = pa_gaahr AND
BELNR = PA_BELNR.
LOOP AT LT_BSEG.
IF LT_BSEG-BSCHL = '25' OR LT_BSEG-BSCHL = '26'
OR LT_BSEG-BSCHL = '27' OR LT_BSEG-BSCHL = '28'
OR LT_BSEG-BSCHL = '35' OR LT_BSEG-BSCHL = '36'
OR LT_BSEG-BSCHL = '37' OR LT_BSEG-BSCHL = '38'
OR LT_BSEG-BSCHL = '39'.
LT_BSEG-BUPLA = PA_BUPLA.
LT_BSEG-SECCO = PA_SECCO.
MODIFY BSEG FROM LT_BSEG.
Write : / LT_BSEG-BELNR, 'Update For BSEG', LT_BSEG-BSCHL,
LT_BSEG-BUPLA,LT_BSEG-SECCO.
ENDIF.
ENDLOOP.
Bsik updation
SELECT *
INTO CORRESPONDING FIELDS OF TABLE LT_BSIK
FROM BSIK
WHERE BUKRS = PA_BUKRS AND
GJAHR = pa_gaahr AND
BELNR = PA_BELNR.
LOOP AT LT_BSIK.
IF LT_BSIK-BSCHL = '25' OR LT_BSIK-BSCHL = '26'
OR LT_BSIK-BSCHL = '27' OR LT_BSIK-BSCHL = '28'
OR LT_BSIK-BSCHL = '35' OR LT_BSIK-BSCHL = '36'
OR LT_BSIK-BSCHL = '37' OR LT_BSIK-BSCHL = '38'
OR LT_BSIK-BSCHL = '39'.
LT_BSIK-BUPLA = PA_BUPLA.
LT_BSIK-SECCO = PA_SECCO.
MODIFY BSIK FROM LT_BSIK.
Write : / LT_BSIK-BELNR, 'Update For BSIK', LT_BSIK-BSCHL,
LT_BSIK-BUPLA,LT_BSIK-SECCO.
ENDIF.
ENDLOOP.
BsAk updation
SELECT *
INTO CORRESPONDING FIELDS OF TABLE LT_BSAK
FROM BSAK
WHERE BUKRS = PA_BUKRS AND
GJAHR = pa_gaahr AND
BELNR = PA_BELNR.
LOOP AT LT_BSAK.
IF LT_BSAK-BSCHL = '25' OR LT_BSAK-BSCHL = '26'
OR LT_BSAK-BSCHL = '27' OR LT_BSAK-BSCHL = '28'
OR LT_BSAK-BSCHL = '35' OR LT_BSAK-BSCHL = '36'
OR LT_BSAK-BSCHL = '37' OR LT_BSAK-BSCHL = '38'
OR LT_BSAK-BSCHL = '39'.
LT_BSAK-BUPLA = PA_BUPLA.
LT_BSAK-SECCO = PA_SECCO.
MODIFY BSAK FROM LT_BSAK.
Write : / LT_BSAK-BELNR, 'Update For BSAK', LT_BSAK-BSCHL,
LT_BSAK-BUPLA,LT_BSAK-SECCO.
ENDIF.
ENDLOOP.
ENDFORM. " CHANGE_DATA
Thank You. -
IF Condition in a PL/SQL Script give a report error.
Hello, Im German and I hope you can unterstand my Question.
First, I work with the HTML DB Version 1.6.0.0.0.87 and the Oracle Version 9.2.0.6.
I create a SQL Report, where a PL/SQL Script return the SQL Statement for the Report. This is my source-code, I have short it...:
Declare
sql_str varchar(2000);
sql_str_select varchar(1000) :=' select dim_sparte ... ';
sql_str_from varchar(1000) := ' from faktentabelle,dim_sparte ';
sql_str_where varchar(1000):= ' where and faktentabelle.zeit_id = :POPUP_ZEIT ';
sql_str_groupby varchar(1000):= ' group by dim_sparte.name, faktentabelle.zeit_id ';
Begin
If ( (V('POPUP_NETZGEBIET') is not NULL) and (V('POPUP_NETZGEBIET') <>
'Alle Netzgebiete')) THEN
sql_str_select := sql_str_select || ' ,dim_organisationseinheit.netzgebiet_name ';
sql_str_from := sql_str_from || ' , dim_organisationseinheit ';
sql_str_where := sql_str_where || ' and faktentabelle ... and
dim_organisationseinheit.netzgebiet_name = :POPUP_NETZGEBIET';
sql_str_groupby := sql_str_groupby || ' , dim_orga .... ';
End IF;
sql_str:= sql_str_select || sql_str_from || sql_str_where || sql_str_groupby;
htp.print(sql_str);
Return sql_str;
End;
This Script include a IF-THEN condition. The Condition is true and the sql-String-Variables are updatet.
I can get the string with htp.print() and the Statement is OK.
The report get a Error report error: ORA-1403: no data found. If I copy the printet sql String in a new Report Region with SQL String, the Report is OK. When I write IF(true) instead of IF( Condition) the Report is OK, too.
I try ist with Varibalen V(name) and with :name. Its always the same problem. I cant use IF-THEN-Else Conditions in a Script.
Please help me and say me what is the problem???
Thanks,
SimonaHi Simona,
In the sql region below the region source see that you have " Use Generic Column Names (parse query at runtime only)" check and not " Use Query-Specific Column Names and Validate Query".
This error you usually get when you have a mismatch in your report heading.
Vivek
[email protected] -
Hi all
I've got a error msg when try to generate a report using Cisco history report tool:
Error | An Exceptional Error occurred. Application exiting. Check the log file for error 5022
It only happens when choose report template: ICD_Contact_Service_Queue_Activity_by_CSQ_en_us.
User tried samething on other PC, it working fine.
only on user' own PC and only choose this report, error appears.
user runing windows 7 and do not have crystal report installed
tried reinstalled the software, doesn't work.
also tried this: (https://cisco-support.hosted.jivesoftware.com/thread/2041254) - doesn't work
then tried https://supportforums.cisco.com/docs/DOC-6209 - doesn't work
attached the log file.
thanks.wenqianyu wrote:From the log file:Looks like you get a Login Window.Error message showed up after username/password be enteredThere is an error in the log: Error happened in comparing UCCX version and HRC versionYou may need to do a clean uninstall, download the Historical report from the server, and install it again on the PC.Does this only happen to one PC or to every PC with this application?Wenqian
I have completely uninstalled the HRC, and download from server install again -- still doesn't work with exactly same error.
this matter only happens on this PC, when user try same thing on other PC, it works.
so i think it not relate to server or account. -
I have a form which uses a customer form/report, drop downs etc..
the debug shows it running this statement
...Execute Statement: begin begin SELECT distinct initcap(RTRIM (LTRIM (e.surname, ' *0123456789-/:.?,'), ' *0123456789-/:.?,') || ', ' || RTRIM (LTRIM (e.first_name, ' *0123456789-/:.?,'), ' *0123456789-/:.?,' )) empname, e.ID bulk collect into wwv_flow_utilities.g_display,wwv_flow_utilities.g_value FROM dms.dms_employees@dmsprd e, dms.dms_employee_contracts@dmsprd ec WHERE e.ID = ec.emp_id and e.surname like '%%' AND :p75_date BETWEEN ec.start_date AND NVL (ec.end_date, :p75_date) AND e.brh_id = 3654 ORDER BY 1; end; end;
Then says
"report error: ORA-06502: PL/SQL: numeric or value error: character string buffer too small"
Any Ideas?
Thanks
DeanDenes Kubicek wrote:
A select list is limited in size. I am not sure what the limit is but that is definitelly the case.The maximum size for the HTML generated for a select list is 32K.
86 options sounds on the low side to be hitting that limit, but there are other concerns to this as well. Scrolling through hundreds/thousands of options in a select list is a pain for users, and huge select lists produce bloated pages that impact load times and network bandwidth. That list of around 200 countries you find on many sites is about the sensible maximum length for a select list.
You should use popups.Indeed. -
The oracle application express environment is created by installing the HTTP Server on the windows server and the application express 3.2.1 components on the 11.1.0.7 oracle database on UNIX. The installation is successfully and have not seen any issues during the installation. After completing all the steps, when tried to login and click the application builder or workspace components, I see the error message
report error:ORA-06502: PL/SQL: numeric or value error: character to number.
This error message is seen on most of the pages when trying to accessed and not able to understand the reasons behind it. Its a brand new environment setup and not even presented to developers to test it.
Below error message is always seen when trying to access most of the components like application builder, schema comparison and some other tabs. Please advice
report error:
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
Edited by: user589320 on Jun 9, 2011 5:17 PMI think its better you use APEX 4.x version ratherthan using old version.
You will get more features and some bug fixes and also it's easy for you to get some help when you need.
* If this answer is helpfull or correct then please mark it and grant the points. -
We face the above error in HTMLDB (APEX) application Ver 3.1.0. This occurs when we try to display more number of rows/records in drop-down list (LOV in tabular forms). We are able to display 200 records in LOV. When the list of records exceeds 230, we face the below error
report error:ORA-06502: PL/SQL: numeric or value error: character string buffer too small
the values listed in LOV are from tables (one of the columns in table)
Could anyone give us a solution?Hi
As you are using a tabular form, you could actually do the following:
1 - In the tabular form column's attributes, set the following:
Display as: Select List (query based on LOV)
Display extra values: Yes
List of values definition: SELECT null d, null r FROM DUAL
2 - Add a new page item and set it to generate your select list
3 - Create an HTML region with no template and use the following for its source:
<script type="text/javascript">
function loadList(c, l)
var s = document.getElementsByName(c);
var lItem = document.getElementById(l);
var lLength = lItem.options.length;
var k;
var j;
var x = lItem.innerHTML;
var v;
var o;
var z;
for (k = 0; k < s.length; k++)
z = s[k];
v = z.value;
z.options.length = 0;
for (j = 0; j < lLength; j++)
o = new Option()
o.value = lItem[j].value;
o.text = lItem[j].text;
z.options[j] = o;
z.value = v;
if (z.selectedIndex == -1)
z.selectedIndex = 0;
loadList("f05", "P1_MGR");
</script>
(Change "f05" and "P1_MGR" as appropriate to your column and your new page item respectively)
Now, when you load the page, the select list contains a null entry plus the entry already on the database. The javascript kicks in automatically, loops through every entry in the "f05" column, copies the existing value, replaces the select list with the new page item version and sets its value to the copied value.
Your new page item could be in a DIV tag that has a style of "display:none" to hide it from view.
Andy -
Hi everybody,
I have two Distinct Databases on two distinct servers. (Oracle Ent. Release 10.2.0.3.0 on AIX 5.3). After I install the latest patch last week, One of the APEX installation has some problems on Home>Application Builder Page. The error message is very random and
report error:
ORA-06502: PL/SQL: numeric or value error: NULL index table key value.
When i change the view (details to icons), everything goes to normal. This error message is reflected some of the pages (report region) of some of my applications randomly. When it appears in a report region, i deselect the order method of the region, the result is normal.
But the other APEX application on the other instance has no problem. It is a bug? or Should i re-install the APEX instance?
Thank you for your interest?
Gökhan ÇATALKAYANo, but we have a reproducible test case now so we're working on it. See ORA-06502: PL/SQL: numeric or value error: NULL index table key value
Scott -
PL/SQL function body returning SQL - report error:ORA-01403: no data found
Hi,
I am working on Application Express 4.0.2.00.06, and 11G database.
I have a problem with classic report area of type - PL/SQL function body returning SQL query. Query works if I define region area as - Use Generic Column Names (parse query at runtime only), and does not when I define it - Use Query-Specific Column Names and Validate Query.
I am getting error:
report error:ORA-01403: no data found
This is my query that is returned from function, and displayed with htp.p, and it works ok and returns data in SQL Developer and SQL Workshop (in Apex).
<code>
/* select 1 from dual */ SELECT SIFPRO, NAZIV, VODITELJ, DATPZA,SUM(DECODE(TJEDAN,'2010/46',BRDJEL,null)) as "2010/46" ,SUM(DECODE(TJEDAN,'2010/49',BRDJEL,null)) as "2010/49" ,SUM(DECODE(TJEDAN,'2010/50',BRDJEL,null)) as "2010/50" ,SUM(DECODE(TJEDAN,'2010/51',BRDJEL,null)) as "2010/51" ,SUM(DECODE(TJEDAN,'2010/52',BRDJEL,null)) as "2010/52" ,SUM(DECODE(TJEDAN,'2011/01',BRDJEL,null)) as "2011/01" ,SUM(DECODE(TJEDAN,'2011/02',BRDJEL,null)) as "2011/02" ,SUM(DECODE(TJEDAN,'2011/03',BRDJEL,null)) as "2011/03" ,SUM(DECODE(TJEDAN,'2011/04',BRDJEL,null)) as "2011/04" ,SUM(DECODE(TJEDAN,'2011/05',BRDJEL,null)) as "2011/05" ,SUM(DECODE(TJEDAN,'2011/06',BRDJEL,null)) as "2011/06" ,SUM(DECODE(TJEDAN,'2011/07',BRDJEL,null)) as "2011/07" ,SUM(DECODE(TJEDAN,'2011/08',BRDJEL,null)) as "2011/08" ,SUM(DECODE(TJEDAN,'2011/09',BRDJEL,null)) as "2011/09" ,SUM(DECODE(TJEDAN,'2011/10',BRDJEL,null)) as "2011/10" FROM (SELECT * FROM PMV_PLAN_TVRTKA) GROUP BY SIFPRO, NAZIV, VODITELJ, DATPZA ORDER BY SIFPRO, NAZIV, VODITELJ, DATPZA
</code>
As you can see, I even tried with workaround that I found on the previous post on the forum, and that is to put /* select 1 from dual */ to start query.
Any help would be appriciated./* select 1 from dual */ SELECT SIFPRO, NAZIV, VODITELJ, DATPZA,SUM(DECODE(TJEDAN,'2010/46',BRDJEL,null)) as "2010/46" ,SUM(DECODE(TJEDAN,'2010/49',BRDJEL,null)) as "2010/49" ,SUM(DECODE(TJEDAN,'2010/50',BRDJEL,null)) as "2010/50" ,SUM(DECODE(TJEDAN,'2010/51',BRDJEL,null)) as "2010/51" ,SUM(DECODE(TJEDAN,'2010/52',BRDJEL,null)) as "2010/52" ,SUM(DECODE(TJEDAN,'2011/01',BRDJEL,null)) as "2011/01" ,SUM(DECODE(TJEDAN,'2011/02',BRDJEL,null)) as "2011/02" ,SUM(DECODE(TJEDAN,'2011/03',BRDJEL,null)) as "2011/03" ,SUM(DECODE(TJEDAN,'2011/04',BRDJEL,null)) as "2011/04" ,SUM(DECODE(TJEDAN,'2011/05',BRDJEL,null)) as "2011/05" ,SUM(DECODE(TJEDAN,'2011/06',BRDJEL,null)) as "2011/06" ,SUM(DECODE(TJEDAN,'2011/07',BRDJEL,null)) as "2011/07" ,SUM(DECODE(TJEDAN,'2011/08',BRDJEL,null)) as "2011/08" ,SUM(DECODE(TJEDAN,'2011/09',BRDJEL,null)) as "2011/09" ,SUM(DECODE(TJEDAN,'2011/10',BRDJEL,null)) as "2011/10" FROM (SELECT * FROM PMV_PLAN_TVRTKA) GROUP BY SIFPRO, NAZIV, VODITELJ, DATPZA ORDER BY SIFPRO, NAZIV, VODITELJ, DATPZA
-
Hi Team,
I'm trying to run Invoice Aging report. When I'm running this it's erroring out. Here I'm posting log file
Receivables: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XXRAXINV_SEL_SE module: XXXXX Invoice Print Selected Invoices OBA
Current system time is 20-JUL-2012 11:05:28
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
p_order_by='TRX_NUMBER'
p_cust_trx_class='INV'
p_cust_trx_type_id='1'
p_trx_number_low='10040'
p_trx_number_high='10040'
p_customer_id='10041'
p_open_invoice='Y'
p_check_for_taxyn='N'
p_choice='SEL'
p_header_pages='1'
p_debug_flag='N'
p_message_level='10'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Enter Password:
MSG-00100: DEBUG: AfterPForm_Trigger +
MSG-00100: DEBUG: Multi Org established.
MSG-00100: DEBUG: AfterParam_Procs.Get_Country_Details
MSG-00100: DEBUG: AfterParam_Procs.Switch_On_Debug
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_Low
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_High
MSG-00100: DEBUG: AfterParam_Procs.Get_Tax_Option
MSG-00103: lp_trx_date_clause = and a.trx_date = a.trx_date
MSG-00100: DEBUG: BeforeReport_Trigger.Build_Where_Clause
MSG-00100: DEBUG: P_Choice: SEL
MSG-00100: DEBUG: Choice is other than ADJ, setting ORDER BY.
MSG-00100: DEBUG: AfterPForm_Trigger -
MSG-00100: DEBUG: BeforeReport_Trigger +
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Printing_Option
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Tax_Printing_Option
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Message_Details
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Org_Profile.
MSG-00100: DEBUG: Organization Id: 86
MSG-00100: DEBUG: BeforeReport_Trigger -
MSG-05000: DEBUG: Trx No... 10040
MSG-43749: There is no remit to address defined for country IT and state .
REP-1419: '': PL/SQL program aborted.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1419: MSG-00100: DEBUG: BeforeReport_Trigger +
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Printing_Option
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Tax_Printing_Option
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Message_Details
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Org_Profile.
MSG-00100: DEBUG: Organization Id: 86
MSG-00100: DEBUG: BeforeReport_Trigger -
MSG-05000: DEBUG: Trx No... 10040
MSG-43749
Report Builder: Release 10.1.2.3.0 - Production on Fri Jul 20 11:05:30 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 1
Environment
Application: 12.1.3(OBA)
OS: Linux 5 - 64 bit
Please do the needful.
Thanks
Rk
Edited by: user11157039 on Jul 20, 2012 12:47 PMMSG-43749: There is no remit to address defined for country IT and state .Troubleshooting Remit To Address in Oracle Receivables [ID 1101855.1]
Transactions Workbench: Field Defaulting Logic [ID 1413565.1]
REP-0069: Internal errorARXAGE Aging 4 Bucket Report Errors REP-0069 Internal Error [ID 1321276.1]
Invoice Aging Report Errors With Rep-1419 Rep-57054 Rep-0069 [ID 1340456.1]
'Aging - 7 Buckets Report' ARXAGSW Fails with ORA-01722 [ID 1061714.1]
R12: Some Payables Reports Not Working. Same Errors In Log File: REP-1419, REP-0069, REP-57054 [ID 818320.1]
Thanks,
Hussein -
when i create a report based on a region source query, it displays fine. However the report attributes are weird just displaying column1, column2 and so on as the column details.
When i change the report back to Use Query-Specific Column Names and Validate Query instead of Use Generic Column Names (parse query at runtime only), the report breaks. The error message report error:
ORA-01403: no data found is displayed.
Why is that when i know the report ran successfully with the same queryIt's a sql query i use to build the report. I dont know about session states. Here is the source. It searches data across multiple columns using a search textbox that works. The query worked well before the change.
SELECT Issues.Issue_ID, Issues.Title, Issues.Initial_Issue_Description Description, staff.Developer_name Staff_Assigned, Priority_Codes.Priority_Code, Status_Codes.Status_Code,
Systems.SYSTEM, Modules.Module_Name, Sub_Modules.Sub_Module_Name , Issues.Application_Version,
Issues.Date_Logged, Issues.Created_By, Issues.Target_Date, Issues.Tar_Number, Issues.Last_Updated_By, Issues.Last_Updated_Date,
Issues_Responses.Issue_Detail, Issues_Responses.Issue_Detail_Author
FROM USD_ISSUES Issues,
USD_ISSUE_RESPONSES Issues_Responses,
USD_ISSUE_ASSIGN Issues_Assign,
USD_DBINSTANCES DBInstances,
USD_STATUS_CODES Status_Codes,
USD_PRIORITY_CODES Priority_Codes,
USD_SYSTEMS Systems,
USD_MODULES Modules,
USD_SUB_MODULES Sub_Modules,
USD_STAFF Staff
WHERE Issues_assign.Staff_id = Staff.Staff_ID (+)
AND issues.priority_code_Id= priority_codes.priority_Code_id (+)
AND issues.Status_Code_id = status_codes.Status_code_id (+)
AND issues.instance_ID = dbinstances.INSTANCE_ID (+)
AND issues.system_ID = systems.system_id (+)
AND issues.module_id = modules.module_id (+)
AND issues.sub_module_Id = sub_modules.sub_module_id (+)
AND Issues.Issue_ID = Issues_Responses.Issue_id (+)
AND issues.issue_id = issues_assign.issue_id (+)
AND (:P24_SEARCH IS NULL OR
INSTR(UPPER(TITLE) ||'/'||UPPER(PRIORITY_CODE)||'/'||UPPER(INITIAL_ISSUE_DESCRIPTION) ||'/'||UPPER(STATUS_CODE)||'/'||UPPER(issues.CREATED_BY), UPPER(:P24_SEARCH)) > 0)
order by title;; -
Hi
This started with an asp.net application which I have been maintaining for several years, on an XP 32-bits box. Alas, the box died, and I have acquired a new Development machine, now with Windows 7/64-bits. I have installed Visual Studio 2010 and Crystal reports (13.0.,9), including runtime for 32 and 64 bits.
I got the "unable to load report" error, and I think I have tried everything I could find on the web related to solving this issue.
Finally I got Down to creating a new dummy asp.net application with a dummy report just displying the text TEST. This report Works fine when run from within VS, but if I deploy it to the web server on the Development machine I also get the unable to load report failure.
I believe this is a configuration issue. The application has run fine for years, I just can't get it to Work on the new development machine.
Please help
PeterMake sure that process has read / write rights to the %TEMP% folder. Process Monitor may help.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter -
Hi,
I have two SCCM environments under same active directory domain and one service account have been used for SCCM configurations on both the environments (QA and PRODUCTION). I am facing similar error as mentioned above while trying to fetch reports on
PRODUCTION site, but the QA site is working fine, though same service account have been used for configuring both. While looking at the reportserverservice_<date> log on my Production DB server i see the following error
"processing!ReportServer_0-3!2124!01/02/2015-09:09:30:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: , Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during
report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot read the next data row for the dataset DataSet1. ---> System.Data.SqlClient.SqlException: Conversion failed when converting the nvarchar value 'Override
Default' to data type int."
My DB and SCCM primary site are different and the reorting services point is installed on remote DB server. Please help me resolving the issue.
Troubleshooting performed:
1.Disabled the registry key 'EnableRbacReporting' from HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP to 0 and then restarted SSRS service and the reporting worked for some minutes after that the registry key reverted back to 1 automatically and
reporting started throwing errors again.
2. Checked with the permissions on DB whether or not 'sysadmin' role is assigned to the SCCM service account.
3. re-registered the SQL management Provider WMI class.
mofcomp.exe “C:\Program Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”Hi All,
Finally found exact solution to the reporting error.
Error: while launching SCCM reports (both from Console and web based) an unexpected error occured with error message as "The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist.
It may already have been terminated. (rsRuntimeErrorInExpression)"
Solution: This is password replication issue for the domain account used to configure reporting services point in SCCM. If your SQL SSRS reporting services instance and databse runs with local default account whereas the reporting services point on SCCM
primary site is configured with domain account, (As in My case) you need to perform the following in order to get rid of the error.
Launch 'Reporting Services Configuration Manager' from the SQL SSRS box(either Local or Remote), Connect to Report Server Instance->Go to 'Execution Account' tab->Specify the 'Execution Account' as domain account and password which is used to configure
Reporting Services Point in SCCM Primary Site, and then click apply.
Now Lauch the report either way (Web based or from Console), the error will disappear and all your default reports will execute perfectly as before. -
Crystal report error on Target Machine
We have to provide application exe to our clients. The application is developed in Visual Studio.Net 2010 and by using SAP crystal report CRforVS_13_0. Client must be able to fire reports on their target machine on which the Dot Net framework and u201CCRforVS_redist_install_64bit_13_0_1u201C run time utility is installed. But it gives a crystal report error on the target machine.
Our development and target machines have Win 7 Professional, 64-bit OS installed.
Kindly provide us with an appropriate run time version for target machine in order to fire reports or any other solution in order to make our project work on target machine.
Thanks!Thanks a lot Don for your valuable suggestions.
We have already taken care of the points which you mentioned in your reply on development side. Also, we have downloaded crystal report from the link which you posted but on DEPLOYMENT side we are unable to run reports from our application.
It gives the notification when we try to install crystal report on a target machine as "You must have visual studio 2010 installed in order to install the crystal report".
The DEPLOYMENT problem we are facing is in RUNTIME environment on TARGET machine. Our TRAGET machine has properly installed Win 7 Professional 64 bit, .NET Framework Ver 4 and CRforVS_redist_install_64bit_13_0_1 . We also have properly installed application on this machine. We got no errors while installing any of the above. The problem starts when we fire a report on target machine from the application.
We get the error as "The type initializer for 'CrystalDecisions.CrystalReports.Engine.ReportDocument' threw an exception"
So, we are looking for an appropriate RUN TIME version of Crystal Report which can be installed on the target machine to fire reports (where visual studio 2010 is not installed).
Please help suggest an exact version to download for target machine and the steps if it has a specific procedure.
Thank you!
Ruchir -
QuickTime 'Don't Send' report Error
Hey, lve just installed QuickTime and when im running it im receiving 'Don't Send'
report error, iv tried reinstalling it \ redownloading \ repairing. nothing works.
any suggestions?
thanksIs this happening when your trying to open a particular file type with QT? And you then get a microsoft message that a problem occurred and you can submit to microsoft or not send? Or is this happening while just trying to open QT player on it's own without attempting to open a file?
Maybe you are looking for
-
How will you turn off an IPhone 4S voice over with the latest IOS
How will you turn off Voice Over in Iphone 4S? i tried turning it off through settings/accessability/voice over but when i turned it off it always go back to ON. It is very depressing to go over with this feature. Thanks.
-
Issue with Datasource in BPEL 11g
Hi, I am getting the following error intermittently with the datasource when used in the BPEL process. I already had a look at the forum post A stale Connection Factory or Connection Handle may be used in SOA 11g The particular settings suggested in
-
No A2DP support for Nokia N80!
I just wonder why Nokia can't add support for A2DP in the new firmware for Nokia N80ie cellphone. =( I just uppdatet my phone in hope of getting somewhere,but it was pointless. It would be pretty nice if i could use my N80 as a real media centre with
-
Contact name not displaying for texts/messages, only phone number does
When I turn on my iPhone 6 (iOS 8.0.2) in the morning (I shut it off at night), any received text messages (iMessages or standard texts) only show the phone number of the person who sent the text and the standard tone for texts is heard, when it shou
-
Unable to verify credentials, 9i on NT - works with 7x ver9001100
I am able to connect to our 7x database (which is on a Solaris/Sun server) using the 9001100 ODBC driver from either an ASP or ActiveX object. Recently I attempted to use the same code to connect to a 9i database running on a Windows 2000 server, whi