TDS line items are not Display in FB60
Hi Experts,
when in simulate a document in T code- FB60. the TDS amount is calculated properly . DR , Cr is ok but the Line item of the TDS is not displayed. when i post the document and open in FB03 all line items are dispalyed with TDS Line items also.. Proper Tax code of payment and invoice is attached.
why not shown in FB60 when simulating a document??
Hi
If in FB60 you want to simulate tax items also, click on simulate from menu, you will be able to see the required details. If you click on simulate icon, it will not be visible.
Regards
Sanil Bhandari
<a href="http://www.vcq.biz/">nature wallpapers</a>, <a href="http://www.utorrent.name/">utorrent</a>f in FB60
Similar Messages
-
TDS line items are not getting reflected in J1INCHLN
Hi Experts,
While generating TDS challan we are not getting advance line items in J1INCHLN screen
We made one advance payment which included 2 payment line items and two different tax codes, while generating TDS challan its is showing only one TDS line item that is Rs.1000/-, another TDS line item of Rs.966/- is not showing.
Below is the example
XYZ 43,000.00
XYZ 46,000.00
Bank 96,329.00-
S/Tax Interim-In Cr 5,160.00
S/Tax Interim-In Cr 3,864.00
ST Interim E.C-In Cr 103.00
ST Interim E.C-In Cr 77.00
ST Inter H E.C-In Cr 52.00
ST Inter H E.C-In Cr 39.00
TDS Pble Contractors 966.00-
TDS Pble Contractors 1,000.00-
I checked the below possibilities for reason why its not getting reflected
Vendor master having recipient type
WITH_ITEM table updated with recipient type
In the line item also having Business Place and section code
Please suggest me is there any way to resolve the issue.
Thanks & Regards,
AIMHi,
Check whether the recipient type CO or OT is updated in With_item table for the line items that are missing in J1INCHLN.
If Recipient type is not maintained in vendor master, at the time of posting the entry, then it does not get picked up in J1INCHLN. Even if you maintain in Vendor master later on, the With_item table does not get updated. This is one of the reasons why the line items does not get picked up in J1INCHLN. Check this, as you are confirming that Business Place, Section code etc.. are all present in line items and also that it is appearing correctly in With_item table.
Regards
Divya S -
Profit center line items are not displaying in KE5Z
HI Eperts,
we are executing tcode KE5Z. System is not displaying any line items. because we have missed out in configuration updation of line items and on line transfer check boxes activation in 1KEF.
please advise how we have to retreive whole data posted up to now under this controlling area..
Regards
vekat....Hi Venkat,
Please check the following link.
[http://help.sap.com/saphelp_45b/helpdata/en/eb/1370e343c411d1896f0000e8322d00/frameset.htm]
Also check the tcodes 1KE8 (Transfer FI Actual Data), 1KEC (Transfer MM Actual Data) and 1KE9 (Transfer SD Billing Documents)
The path for these tcode is as under:
Controlling --> Profit Center Accounting --> Tools --> Prepare Production Startup --> Data Transfer.
Please check in your test system first.
Regards,
Sameer -
Automatic Payment program -line item cleared not displaying in table
automatic Payment program -line item cleared not displaying in table
i have re run the APP program DUSR1 same earlier it has run twice but table dose not show double payment to vendors how to resolve the issue.
Can some one please guide me on this.Hi Priyanka,
First, which table are you referring to. If your fist APP run clears the line item, it will no longer be available in the open item.
Please be more specific on the problem so that we can try to help you. If possible, please provide screenshots.
Regards,
Ganesh -
Asset Line items are not updating in table ANEP
Hi friends,
I found that asset line items are not getting updated in ANEP table,.
This is my precedure for posting of depreciation.
I'll create Asset through AS01, then i'll use the T.Code: F-90.. then i'll run the depreciation program thru t.Code: AFAB.
In but i am unable to capture the values of Planned and Depreciated or Posted values in ANEP.. Is there is any other table for this...
Where is the mistake in my process..
thanks in advance..
NaveenHI Naveen
The FI-AA documents are stored in tables ANEK (document header), ANEP (document line items) and ANEA (proportional values). You can use FI-AA standard report RABEWG_ALV01 to list all transactions to an asset in one fiscal year, and report RAABGA_ALV01 to list only retirement postings.
ANEA should be the solution you are looking for.
Hope it helps!
Cheers
Z -
Few line items are not coming at the time of creation of delivery
Dear Experts,
When the user creating the delivery few line items are not picking in the delivery document
the following checks i verified,
Stock is available
shpping condition is differ from sold to party and sales document
Plants are same for all the line items
why the few line items are not coming in the delivery document creation,
please help me to sort out this issue
Thanks and Best Regards,
Muralidharan SHi,
Check below points.
Point 1:
When you create a delivery document, you create it for a Shipping Point.
So whatever the line that came in to one delivery has determined same shipping point that you entered in VL01N screen.
Others got a different shipping point and that's why it didn't come to the same delivery document.
Shipping point determined based on below criteria
- Shipping Condition - From customer master
- Loading Group - Material
- Plant - Delivery Plant of the sales order line item
You assign a proffered shipping point for above combination in configuration.
If that combination is not find, those line items are not going in to the delivery.
You can check the log of the delivery document for more information as well.
Point 2:
Check the line item Requested delivery date and the "Selection Date" you entered in the VL01N screen.
Al Requested delivery dates has to be on or before the "Selection Date" you entered in the VL01N screen.
Those line items which has a date more than that will dropped in the delivery.
Best regards,
Anupa -
Line items are not appearing for some users
Hi
In one module pool program some line items are not appering for specific users. For Ex: Out of 5 line items user1 is able to see only 3 and user2 able to see all the line items. what might be the reason.
Regards
John.Hi,
What do you mean by line items? Are you talking about screen fields in your module pool program or output of the program?
Please clarify your issue.
Regards,
RS -
Line items are not coming on next page in Bill of Lading
When I am printing Bill of Lading, if it has around 8 line items then its printing on the first page, but if line items are more then its not printing the remaining line items on second page.
I have one delivery with 10 line items, when I am printing it then on first page 7 line items are coming and for 8 line item only material is printing and on second page its description is printing but last two line items are not printing at all.
Kindly help me to resolve the issue as it is very critical.Hi,
Check below points.
Point 1:
When you create a delivery document, you create it for a Shipping Point.
So whatever the line that came in to one delivery has determined same shipping point that you entered in VL01N screen.
Others got a different shipping point and that's why it didn't come to the same delivery document.
Shipping point determined based on below criteria
- Shipping Condition - From customer master
- Loading Group - Material
- Plant - Delivery Plant of the sales order line item
You assign a proffered shipping point for above combination in configuration.
If that combination is not find, those line items are not going in to the delivery.
You can check the log of the delivery document for more information as well.
Point 2:
Check the line item Requested delivery date and the "Selection Date" you entered in the VL01N screen.
Al Requested delivery dates has to be on or before the "Selection Date" you entered in the VL01N screen.
Those line items which has a date more than that will dropped in the delivery.
Best regards,
Anupa -
Document library items are not displaying in sorted order in sharepoint 2013
Hi,
I have a document library , I am storing document sets on it.
28326 items are there in the library.
I have configured sort on Name columns. Initially items are displaying in sorted order like (A,B,C,D,E...)
Now Items are not displaying in a sorted order it is displaying like (A, B,C,D,E,A,C...) like this.
Please help me on this sorting issue.
Thanks,
SamirAre the documents displaying in your image inside the document sets? If so then your sets (folders) are displaying in alphabetical order and the documents inside the sets are displaying in alphabetical order. This is what i would expect.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem. -
Hi,
When i simulate in F-28, line items is not displaying
eg: 40 SBI 1500
only displaying the remaining items like
eg: 40 discount 500
50 ABC 2000
is not displaying
what may be reason. where can i change settings
Rgds
sunficoThis will happen as the system searches for automatically created line items, in this case, the discount.
Nothing to worry, press Enter key twice, after simulation, you should get the all line items display
Thanks
Siva -
CIN: Items are not displayed while updating the RG1 Register using T Code:
Hi Experts,
Items are not displayed while updating the RG1 Register using T Code: J1I5.
System is not showing any error message.
Can any one explain to update the RG1 Register?
Thanks
ChandraHi,
dont go the table again and again . the table is updated at intial stage only for stock update but not when SAP is running.
In day to day bussiness the flow is as follows:
Production - MB31 - to Unres stock
Sales - VL02n - PGI - to customer - i.e out of unres stock
Every day u can run TC J1i5 once in a day as decided and update the register so all transactions which have happend in that day gets updated i.e both input and output.
and this will happen every day.
hence dont use table as it is only for intial data upload i.e just before golive.
Hope i am clear.
krishna -
Quotation Items are not displayed on SRM Web
Hi experts!
I did a program to create a quotation based on a Bid invitation.
My program creates the document correctly, but, when i try to show the quotation on the browser, the quotation items are not displayed.
If I open this same quotation on the SRM Gui (TCODE = BBP_PD), the quotation items are there.
Anybody in here already had this problem?
Thanks in advance.
Danilo CardosoHi.
I got to fix my program!
My code is like that below:
ls_quot_item_e-src_guid = bid_items-guid.
ls_quot_item_e-src_object_type = 'BUS2200001'.
The business object BUS2200001 is the BO of Items of Bid Invitation, now, my reference is complete.
It works fine now.
Thanks for you help.
Regards.
Danilo -
TDS liability line items are not picking in u2013 J1INCHLN
Hi Experts
During depositing of TDS through J1INCHLN it is not picking all line items i.e. available in Ledger (FBL3N). We came to know after reconciliation even as all line items are available in table With_item as uncleared.
We are facing this problem as the data from 01.03.2009u2026. Previously everything was working fine.
One more thing I will stress here that we have started Purchase Order based invoice verification also from this period.
Pl help ASAP.
Regards
Kuldeep Dubeycheck the line of TDS is having the Business Place, if the business place is not capturng in TDS line items , then the create the substitution for Business Place & Section Code.
without business place in TDS line items you can't make the TDS payment.
Regards
Akmal -
Items are not displayed --- REUSE_ALV_HIERSEQ_LIST_DISPLAY
Hi experts,
i'm stuck in this weird problem.
Items (it_items) are not displayed in table. I've cheked with debugger and it_items contains lines.
Thanks in advance.
REPORT z_hier.
TYPE-POOLS: slis.
DATA: fieldcatalog TYPE slis_t_fieldcat_alv.
DATA: it_header LIKE STANDARD TABLE OF zvend_header WITH HEADER LINE,
it_items LIKE STANDARD TABLE OF zvend_items WITH HEADER LINE,
g_tabname_header TYPE slis_tabname,
g_tabname_item TYPE slis_tabname,
gs_keyinfo TYPE slis_keyinfo_alv.
PARAMETERS: lifnr LIKE lfa1-lifnr.
INITIALIZATION.
CLEAR gs_keyinfo.
gs_keyinfo-header01 = 'LIFNR'.
gs_keyinfo-item01 = 'IDNLF'.
g_tabname_header = 'it_header'.
g_tabname_item = 'it_items'.
START-OF-SELECTION.
PERFORM retrieve_data.
END-OF-SELECTION.
PERFORM build_fieldcatalog.
PERFORM display_list.
FORM build_fieldcatalog.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
* I_PROGRAM_NAME =
i_internal_tabname = g_tabname_header
i_structure_name = 'ZVEND_HEADER'
i_client_never_display = 'X'
* I_INCLNAME =
* I_BYPASSING_BUFFER =
* I_BUFFER_ACTIVE =
CHANGING
ct_fieldcat = fieldcatalog
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
* I_PROGRAM_NAME =
i_internal_tabname = g_tabname_item
i_structure_name = 'ZVEND_ITEMS'
i_client_never_display = 'X'
* I_INCLNAME =
* I_BYPASSING_BUFFER =
* I_BUFFER_ACTIVE =
CHANGING
ct_fieldcat = fieldcatalog
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. "build_fieldcatalogHi Dan M.,
Please follow this...
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
i_callback_program = w_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
is_layout = wa_layout
it_fieldcat = i_fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT = I_SORT
IT_FILTER =
IS_SEL_HIDE =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
it_events = i_event
IT_EVENT_EXIT =
i_tabname_header = 'i_ekpo' <----
Pass here header table name
i_tabname_item = 'i_eket' <----
pass here item table name
I_STRUCTURE_NAME_HEADER =
I_STRUCTURE_NAME_ITEM =
is_keyinfo = wa_keyinfo
IS_PRINT =
IS_REPREP_ID =
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab_header = i_ekpo -<<----
Pass here header internal table
t_outtab_item = i_eket <<----
Pass here item internl table
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
for wa_keyinfo:
You need to use common fields between header & item.
for ex:
wa_keyinfo-header01 = 'EBELN'.
wa_keyinfo-item01 = 'EBELN'.
wa_keyinfo-header02 = 'EBELP'.
wa_keyinfo-item02 = 'EBELP'.
Hope this can solve your problems.
Regards,
Tutun -
Line items are not appearing while processing F-44
With transaction F-44, to clear vendor account, the system displays only one open item, whereas there are 2 open items on the line item report (FBL1N). Further there are two line items in BSIK.
Please helpHello,
There are two line items in the Vendor account, the details are as follows:
Date Amount PK DR/Cr
31.03.2008 12,050.00 38 Cr
05.06.2008 12,050.00 28 Dr
of above while processing F-44, we are able to see only debit item dated 05.06.2008.other line item is not appearing. When tried by putting document number, it says "NO OPEN ITEMS FOUND"
Maybe you are looking for
-
Product Name: HP Pavilion p6390d OS: Windows 7 32 - bit Error Message: Hard Disk Failure is Imminent Things I did before having this error: I reformatted my computer to erase an error from my program (specifically: solidworks) since it has conflicts
-
What is best windows compatible web share format once and for all?
Wmv looks good, but I don't want to buy flip4mac studio. The other formats I have tried look bad and are huge files. I have searched forum for answer in vain.
-
Dear Expert, can anybody tell me the solution for the below scenario. 1-i want to attach few documents to WBS elements in PS. 2-Project manager should get one mail automatically after i attach the document. 3-Then Project manager has to change the st
-
Red Exclamation mark for messaging
I have a circular red exclamation point on my message and I can not send or recieve any messages. All the other functions work just fine. Please help!
-
Classyfying the customers based on their sales
Hi, I have report showing the cutomers and the sales units to them for example: customer sales A 200 B 300 C 50 D 100 how can i grade the customers based on their sales, for example Grading customer sales Gold >