TDS returns using in sap

Dear all
how to file the TDS returns using in sap, if posible send screen shots
yours
babu

Hi,
We cannot send screen shots in the forum.  We can give suggestions and possible solutions.  You can use T.Code
J1INMIS for generating the TDS returns and for ETDS Return - J1INQEFILE.  These can be done after updation of
Remittance Challan, Posting outgoing payment, Bank Challan Update.
Regards,
Sadashivan

Similar Messages

  • TDS return excluding WCT line items

    Hi Experts,
    According to my understanding TDS return in sap are taken by selecting section codes in J1INQEFILE. By using a validation it is required in my system to fill business place\section code in vendor invoice hence section code is updated in TDS wHT codes and WCT codes line items.
    Please help me to understand that what setting i have to do so that section codes should not updated in WCT WHT line items so that WCT line items can be excluded in TDS return.
    This is the case where TDS and WCT both are applicable in same invoice and WCT is also treated by WHT codes and WHT keys.
    Please help..
    Regards,
    Kuldeep Dubey

    Hello,
    Generally I suggest clients not to do the payment of open WCT items through J1INCHLN, hence it is not picked in the quarterly returns.
    The payment can be done through a G/L payment transaction like f-07.
    Regards,
    Sam

  • J1INQEFILE - Quarterly TDS Returns

    Hi Experts,
    When I am excuting the quaterly returns, we are not getting all the documents in the list.
    Reason: Challan number (J_1IINTCHLN) is not updated in the with_item table. But already accounting document is cleared.
    How to update this challan number in order to get the missing documents in the quaterly returns
    Please guide
    Thanks and Regards,
    Ram

    Thank you Praveen,
    I have done everything which are mentioned in the doc.
    We have done J1INCHLN - Create Remittance Challan then J1INBANK - Enter Bank Challan.
    When I am taking report by using t code J1INQEFILE - Quarterly TDS Returns, I am not getting these documents in the report.
    I check the with_item table, there the internal challan number is not updated.
    How do I reconstruct this number to get all items in the report
    Regards,
    Ram

  • Search help for Web Dynpro using the SAP-search help

    Hi,
    I’m trying to create a generic search help for Web Dynpro using the SAP-search help. It should working so, that I construct a Web Dynpro-component, that gets the data of the search help from the SAP-system, interpreted it and creates the ui-elements and the needed context generic.
    The mapping between the Input field of the customerview and the right search help is to be made with an xml-file, which contains the information: name of the view, the input field, the search-help-name and the name of the field that will be returned.
    The xml-file is reading from a helper-class. That helper-class contains any information, witch need the search help-component as well as the customer-component.
    The initialization takes place in the method wdDoModify of the customer. The call of the search help from the customer should be implement with an Action, witch is bound to a Button(create dynamic in the helper-class behind the input field).
    In a second foot should be create a plugin for eclipse, witch insert the used files (search help component, helper class, …) in the project. In addition it should create the call in the customer generic.
    It would be great if someone can give me a feedback!

    Hi Mike,
    The BlanketAgreement.exe is a reference to the executable that will be created when you compile the solution you created in Part II - Part III. I think there is a mistake in the tutorial because it asks you to name the project 'Blanket' which means that by default the executable will be called Blanket.exe and not BlanketAgreement.exe. The tutorial also misses the step asking you to compile the Blanket project before you go on to create an installer. You should compile your Blanket project in Release mode before creating an installer. By compiling the project you'll get a Blanket.exe file in the bin folder of your Blanket project which you then need to add to the installer per the instructions.
    SAP do offer development courses in some areas and there is training material here on the SDN and on the SAP partner portal (and maybe the customer portal as well). Try searching this forum for 'training' or 'tutorial' and you should get a few links. There's also a development certification.
    Personally I'd recommend you give yourself a little project to work on and just get stuck in
    Kind Regards,
    Owen

  • Procedure for filing/updating TDS returns(certificates/challans)

    Hi All,
    As far as TDS configuration is concerned, I need the info on the process on how to file the TDS returns are concerned, updating the challans etc.
    The steps that I've configured are: withholding tax types, codes, rounding off etc all such steps which are enabling me to get the TDS deducted for each vendor in J1INMIS, however I'm encountering problems in certificate number ranges and I'm getting confused.
    Plz suggest in going about for being able to get the report  on total TDS deducted and updating the certificates
    regards
    kim

    Dear Venkatesh,
    Thank you for replying.
    I did maintain as you had suggested to me. Now I'm facing a new problem.
    The bold text is exactly, what I've copied from the system's error message and pasted it across here.
    No unpaid tax lines exist for the given selection criteria.
    Message no. 8I702
    Diagnosis
    The corresponding withholding tax line  &1& is not present in WITH_ITEM table.
    System Response
    For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updation. Check the entries.
    Procedure
    check entries in table WITH_ITEM for the open tax items chosen for clearing.
    Now, I dont have a clue to go further from here. Plz suggest, if there's something else for me to go ahead with.
    I appreciate you for your answer coz that's taken me a step further is what I feel.
    I'm sorry I've assigned only 2 points, coz I've used up the max llimit of being able to assign 6 points, If my problem is solved, I'll make it sure I'll assign 10 points
    thnx once again
    Rgds
    kim

  • Quarter TDS returns process

    Hi guru,
          Please can anybody explain about TDS return. T.code - J1INQEFILE.
          How data are fetching from which table.?
          Can anybody tell which table data are fetching for T.code - J1INQEFILE.
    Regards,
    manas

    Hi Manas,
    You can execute this multiple times.. a file is generated which can be uploaded directly for return submission online if the file is error free.
    The master table for TDS is "with_item", but there are many tables from which the data would be fetched.. it is a standard SAP report and it is not easy to say which all tables are sourced in internal SAP program.
    Regards,
    Kavita

  • What are the different functions used in sap script?

    Hi,
    What are the different functions used in sap script? What are the parameters used in each Function?
    Regards,
    Mahesh

    he print program is used to print forms. The program retieves the necesary data from datbase tables, defines the order of in which text elements are printed, chooses a form for printing and selects an output device and print options.
    Function modules in a printprogram:
    When you print a form you must used the staments OPEN_FORM and CLOSE_FORM. To combine forms into a single spool request use START_FORM and END_FORM.
    To print textelements in a form use WRITE_FORM. The order in which the textelements are printed, is determined by the order of the WRITE_FORM statements. Note: for printing lines in the body, you can also use the WRITE_FORM_LINES function module.
    To transfer control command to a form use CONTROL_FORM.
    Structure of a print program
    Read data
    Tables: xxx.
    SELECT *
    FROM xxx.
    Open form printing - Must be called before working with any of the other form function modules.
    Must be ended with function module CLOSE FORM
    call function 'OPEN_FORM'.....
    To begin several indentical forms containing different data within a single spool request, begin each form using START_FORM, and end it using END_FORM
    call funtion 'START_FORM'.....
    Write text elements to a window of the form
    call function 'WRITE_FORM'.....
    Ends spool request started with START_FORM
    call funtion 'END_FORM'.....
    Closes form printing
    call function 'CLOSE_FORM'...
    OPEN_FORM function
    Syntax:
    CALL FUNCTION 'OPEN_FORM'
    EXPORTING
      APPLICATION                       = 'TX'
      ARCHIVE_INDEX                     =
      ARCHIVE_PARAMS                    =
      DEVICE                            = 'PRINTER'
      DIALOG                            = 'X'
      FORM                              = ' '
      LANGUAGE                          = SY-LANGU
      OPTIONS                           =
      MAIL_SENDER                       =
      MAIL_RECIPIENT                    =
      MAIL_APPL_OBJECT                  =
      RAW_DATA_INTERFACE                = '*'
    IMPORTING
      LANGUAGE                          =
      NEW_ARCHIVE_PARAMS                =
      RESULT                            =
    EXCEPTIONS
      CANCELED                          = 1
      DEVICE                            = 2
      FORM                              = 3
      OPTIONS                           = 4
      UNCLOSED                          = 5
      MAIL_OPTIONS                      = 6
      ARCHIVE_ERROR                     = 7
      INVALID_FAX_NUMBER                = 8
      MORE_PARAMS_NEEDED_IN_BATCH       = 9
      SPOOL_ERROR                       = 10
      OTHERS                            = 11
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Some important parameters:
    FORM      Name of the form
    DEVICE      
    PRINTER : Print output using spool
    TELEFAX: Fax output
    SCREEN: Output to screen
    OPTIONS      Used to control attrubutes for printing or faxing (Number of copies, immediate output....
    The input for the parameter is structure ITCPO.
    CLOSE_FORM function
    CALL FUNCTION 'CLOSE_FORM'
    IMPORTING
      RESULT                         =
      RDI_RESULT                     =
    TABLES
      OTFDATA                        =
    EXCEPTIONS
      UNOPENED                       = 1
      BAD_PAGEFORMAT_FOR_PRINT       = 2
      SEND_ERROR                     = 3
      SPOOL_ERROR                    = 4
      OTHERS                         = 5
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Paramerters:
    RESULT      Returns status information and print/fax parameters after the form has been printed. RESULT is of structure ITCPP.
    WRITE_FORM function
    CALL FUNCTION 'WRITE_FORM'
    EXPORTING
      ELEMENT                        = ' '
      FUNCTION                       = 'SET'
      TYPE                           = 'BODY'
      WINDOW                         = 'MAIN'
    IMPORTING
      PENDING_LINES                  =
    EXCEPTIONS
      ELEMENT                        = 1
      FUNCTION                       = 2
      TYPE                           = 3
      UNOPENED                       = 4
      UNSTARTED                      = 5
      WINDOW                         = 6
      BAD_PAGEFORMAT_FOR_PRINT       = 7
      SPOOL_ERROR                    = 8
      OTHERS                         = 9
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Some important parameters:
    ELEMENT      Specifies which textelement is printed
    WINDOW      Specifies which window is printed
    TYPE      Specifies the output area of the main window. This can be:
    TOP - Used for headers
    BODY
    BOTTOM - Used for footers
    FUNCTION      Specifies whether text is to be appended, replaced or added
    Example of how to use the WRITE_FORM function module together with a script.
    Form layout of the MAIN window
    /E INTRODUCTION
    Dear Customer
    /E ITEM_HEADER
    IH Carrier, Departure
    /E ITEM_LINE
    IL &SBOOK-CARRID&, &SPFLI-DEPTIME&
    /E CLOSING_REMARK
    The print program
    Writing INTRODUCTION
    CALL FUNCTION 'WRITE_FORM'
         EXPORTING
              ELEMENT                  = 'INTRODUCTION'
              FUNCTION                 = 'SET'
              TYPE                     = 'BODY'
              WINDOW                   = 'MAIN'
        EXCEPTIONS
             OTHERS                   = 8
    Writing ITEM_HEADER
    CALL FUNCTION 'WRITE_FORM'
         EXPORTING
              ELEMENT                  = 'ITEM_HEADER'
              FUNCTION                 = 'SET'
              TYPE                     = 'BODY'
              WINDOW                   = 'MAIN'
        EXCEPTIONS
             OTHERS                   = 8
    Set ITEM_HEADER into TOP area of main window for subsequent pages
    CALL FUNCTION 'WRITE_FORM'
         EXPORTING
              ELEMENT                  = 'ITEM_HEADER'
              FUNCTION                 = 'SET'
              TYPE                     = 'TOP'
              WINDOW                   = 'MAIN'
        EXCEPTIONS
             OTHERS                   = 8
    Write ITEM_LINE
    LOOP AT .....
       CALL FUNCTION 'WRITE_FORM'
            EXPORTING
                 ELEMENT               = 'ITEM_LINE'
                 FUNCTION              = 'SET'
                 TYPE                  = 'BODY'
                 WINDOW                = 'MAIN'
           EXCEPTIONS
                OTHERS                 = 8.
    ENDLOOP.
    Delete ITEM_HEADER from TOP area of main window
    CALL FUNCTION 'WRITE_FORM'
         EXPORTING
              ELEMENT                  = 'ITEM_HEADER'
              FUNCTION                 = 'DELETE'
              TYPE                     = 'TOP'
              WINDOW                   = 'MAIN'
        EXCEPTIONS
             OTHERS                    = 8
    Print CLOSING_REMARK
    CALL FUNCTION 'WRITE_FORM'
         EXPORTING
              ELEMENT                  = 'CLOSING_REMARK'
              FUNCTION                 = 'SET'
              TYPE                          = 'BODY'
              WINDOW                   = 'MAIN'
        EXCEPTIONS
             OTHERS                    = 8
    START_FORM function
    CALL FUNCTION 'START_FORM'
    EXPORTING
      ARCHIVE_INDEX          =
      FORM                   = ' '
      LANGUAGE               = ' '
      STARTPAGE              = ' '
      PROGRAM                = ' '
      MAIL_APPL_OBJECT       =
    IMPORTING
      LANGUAGE               =
    EXCEPTIONS
      FORM                   = 1
      FORMAT                 = 2
      UNENDED                = 3
      UNOPENED               = 4
      UNUSED                 = 5
      SPOOL_ERROR            = 6
      OTHERS                 = 7
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    END_FORM function
    CALL FUNCTION 'END_FORM'
    IMPORTING
      RESULT                         =
    EXCEPTIONS
      UNOPENED                       = 1
      BAD_PAGEFORMAT_FOR_PRINT       = 2
      SPOOL_ERROR                    = 3
      OTHERS                         = 4
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CONTROL_FORM function
    The CONTROL_FORM function module alows you to create SapScript control statements from within an APAB program.
    Syntax:
    CALL FUNCTION 'CONTROL_FORM'
      EXPORTING
        command         =
    EXCEPTIONS
      UNOPENED        = 1
      UNSTARTED       = 2
      OTHERS          = 3
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Example:
    Protecting the text element ITEM_LINE
    CALL FUNCTION 'CONTROL_FORM'
      EXPORTING
        COMMAND = 'PROTECT'.
    CALL FUNCTION 'WRITE_FORM'
      EXPORTING
        TEXELEMENT = 'ITEM_LINE'.
    CALL FUNCTION 'CONTROL_FORM'
      EXPORTING
        COMMAND = 'ENDPROTECT'.

  • VAT report & TDS returns available for India

    Dear Friends,
    Could you please let me know if there is any VAT report & TDS returns available in standard SAP for India.
    Regards
    Dwarak.

    HI,
    Did you check J1IUN for VAT report and J1INAR - Annual Return for TDS returns for TDS returns you need to maintain vatiants in the programm.
    Thnaks
    VK

  • TDS return is not being generated

    Hi,
    We are facing a probelm of TDS return process through J1INEFILE in Development server during testing in 2nd Quarter from 01.07.2009 to 30.09.2009. Our version is ECC 5 and patch level is 17. In ECC 6 tcode used as J1INQEFILE. We have checked the value in J1INMIS, completed Remittance Challan through J1INCHLN, completed bank updated through J1INBANK. Next step is TDS Return process through J1INEFILE/J1INQEFILE.  But it shows error message as "no date has been selected for the given selection criteria" inspite of selecting last tab (Output Processing options) informations are e-file generation and Presentation server's location for files download. It will be iplemented very soon.
    Kindly need your suggestion.
    Best Regards,
    A. Roy

    Hi Anuj,
    In the main screen of J1INEFILE I am not giving input in field of TDS Section and Business Area under Withholding Tax(classic). Business Area not required in our business scenario and Withholding tax field is not mandatory. Rest of the parts I am giving input including all the fields of tabs including Statutory Signatory Details, Address Details and Output Processing options tab. I ticked e-file generation check box and mentioned the path where four files will be downloaded. Why files are not generated ?
    Regards.
    A. Roy
    Edited by: ARoy1000 on Jan 5, 2010 12:55 PM
    Edited by: ARoy1000 on Jan 5, 2010 12:56 PM

  • ITD State Code for TDS return

    Hi friends,
    kindly guide me the creation of ITD State Code for TDS return. Is it Local Tax Office or District Tax Office under Section Code of South Korea ? What is the exact creation procedure of ITD State Code as mandatory field in TDS Retrun screen(J1INEFILE - Version ECC 5) .
    Regards,
    Samrat

    Hi,
    This question is still pending and the two tables  J1ISTATECD and J1ISTATECDM which is required to be maintained is not available in SAP. Here version is ECC 5. If there is any SAP note or any alternative suggestions need your suggestions.
    Regards,
    Samrat

  • Communication error CPIC return code 019 SAP return  code 728. Delta error

    Hello Experts,
    Would just like to ask if what we suspect is correct. We have running deltas in process chains occurring every early morning. However, upon checking the delta that should have run today, I found that the delta did not push through. I only found this one dump in SM21 that I think is related to the issue:
    MNo.
    R49 Communication error, CPIC return code 019, SAP return code 728
    R5A > Conversation ID: 61442686                                  
    R49 Communication error, CPIC return code 019, SAP return code 728
    R64 > CPI-C function: CMSEND(SAP)                                
    R5A > Conversation ID: 61443687                                  
    R64 > CPI-C function: CMSEND(SAP)                                
    R49 Communication error, CPIC return code 019, SAP return code 728
    R5A > Conversation ID: 61444687                                  
    R64 > CPI-C function: CMSEND(SAP)
    Now we think that the delta did not push through because we are encountering issues with regards to our SAP R/3 system (the source system) and it is currently inaccessible. Did the delta not push through because of the issues and inaccessibility/uber slow processing of our SAP R/3 server? And is the error specified above illustrating this? Any explanation would help. I have already tried looking for similar issues but cannot find anything. Please help. Thanks!

    Hi
    As far I know, The SAP Gateway carries out CPI-C services within the SAP world, which are based on TCP/IP. These services enable SAP Systems and external programs to communicate with one another.
    CPI-C services can be used either in the ABAP program or for the external programs via the interfaces.
    As RFC (remote function call) is based on CPI-C, all RFC connections also pass through the SAP Gateway.
    Errors When Starting Remote Programs Using Remote Shell
    When you use remote shell to start CPIC programs on other hosts, the following conditions apply:
    The (gateway) UNIX ID must be available on the other host
    The gateway host must be entered in the remote host in the file ".rhosts". This file must be located in the HOME directory of the (gateway) UNIX ID.
    The program you want to start must be installed in the HOME directory of the (gateway) UNIX ID on the remote host.
    Read more from help
    http://help.sap.com/saphelp_nw04s/helpdata/en/99/5f8c0bcb7d4280aa862254cffceada/frameset.htm

  • Communication error, CPIC return code 017, SAP return code 236

    Hi guys,
    Need your advice, my SAP system suddenly appear this messages  ( SM21).
    Please assist me.
    Communication error, CPIC return code 017, SAP return code 236
    > CPI-C function: CMINIT(SAP) 

    Hi Uday,
    My SAP using ABAP. Version 4.7
    All RFC working fine except for the OSS
    Error message
    Details Page 2 Line 22 System Log: Local Analysis of ALBANIA                  1                                                                               
    Time     Ty. Nr Cl. User         Tcod MNo Text                                                          
    13:52:36 DIA 01 800 SYSADM            R49 Communication error, CPIC return code 017, SAP return code 236                                                                               
    Details                                                                               
    Recording at local and central time........................ 27.03.2009 13:52:36                          
    Task................ 57584 . 01 D1 Dialog work process No. 01                                            
    User................ SYSADM                                                                               
    Client.............. 800                                                                               
    Terminal............ 10.0.38.                                                                            
    Session............. 1                                                                               
    Transaction code....                                                                               
    Program name........ SAPMSSY1                                                                            
    Problem class....... K    SAP Web AS Problem                                                             
    Development class... STSK

  • How to find what type of middleware product we are using in SAP CRM ?

    Hello All,
    Ca anyone help me in getting the information  for the following :
    1) How to find out what type of middleware product we are using in our Project? ( Currently our SAP CRM version is 4.0 and the middleware is using for R/3 to SAP CRM and vice versa)
    2) Do we have a product called u201CMessaging wareu201D used in SAP ?
    Kindly revert at the earliest .
    Cheers
    Sreedhar

    Hi Sreedhar,
    What you've mentioned is exactly the task of CRM Middleware, which sits on the CRM server and governs the data flow.
    By any chance are you trying to find out about DOE(Data Orchestration Engine) used by SAP NetWeaver Mobile ?
    maybe this link would help then:
    http://help.sap.com/saphelp_nwmobile71/helpdata/en/7f/c9391404c74fabb8ccc321bac64e8d/content.htm
    -Rohit

  • How to make use of SAP NetWeaver Visual Composer in business

    Dear Experts,
        Can anyone help me the use of SAP Netweaver Visual Composer benefits and how it can be used to get the integerated business reult. How it helps the organisation to get benefited and how it differs from other tools.
    Regards
    Veeraraghavan.S

    Hi,
    There is loads of stuff out there on visual composer.  Have a look at this link:
    http://wiki.sdn.sap.com/wiki/display/VC/VisualComposer7.0
    VC is supposed to allow employees with limited technical skills created web based applications which can then be used in the portal.  You do need some technical knowledge but it is more easier than developing code. 
    Nick

  • What are the commands using in SAP ECC 6.0 ehp on SYBASE Database? Backup and restore commands?

    Hi All,
    What are the commands using in SAP ECC 6.0 ehp on SYBASE Database? Backup and restore commands?

    Hi Jayachander,
    Have a look at these sap notes:
    For taking backup: Schedule from DB13 and get the exact command from Logs
    1841993 - SYB: How to schedule backups in DBA Cockpit
    1887068 - SYB: Using external backup and restore with SAP Sybase ASE
    How to restore DB
    1611715 - SYB: How to restore a Sybase ASE database server (Windows)
    Divyanshu

Maybe you are looking for