TDS TAN no, and aknowledgement numbers

HI
Guru's
Here, I am posting TDS certificate, the TAN Number and Aknowledment Number is
not displying in TDS certificate,
Please guide me, whether I missed any settings
With Regards
Arun Kumar

You have to maintain the TAN number in section code under Address at search term field from below path
spro-Financial Accounting (New)-Financial Accounting Basic Settings (New)-Withholding Tax-Extended Withholding Tax-Basic Settings-South Korea-Define Section Codes
for acknowledgment number u have to maintain the acknowledgment number at table J_1IEWT_ACKN through SM30

Similar Messages

Tds cycle mapping and testing

hi,
i have the problem regarding to the tds cycle,so pls inform about the total process of 'TDS CYCLE-MAPPING AND TESTING'
REGARDS
JANA

hai,
the following is the process to get the TDS certificate
TDS Certificate
1.EWT-Basic Settings-Check Recipient type-In-WHTYPE-Rectype-Text
1.Extended WHT Basic Setting-india-define business place- 1000
Enter 1000 as business place and enter description and fill address coloumn.
Assign Business Place to Country Calendar and Day After
Define Section code as 1000 and assign business place and fill address coloumn
Company
Leave on row as blank
Enter TDS circle
Enter TDS No of the company in Search Term ½ and after fillup the address and save it
Extended WHT Posting Certificate numbering for WHT
1.     Define Numbering Class
2.     Define Numbering Group
3.     Define Number Ranges
4.     Assign numbering Group Numbering class
1.Extended WHT Posting-India- Remittance Challan- Document Type
2.Maintain Number Group
Company code Business Area WHT Type Number Group
3.Maintain Number Range for 1,2,3,4,5 under----- text number range from 10001-99999
4.     Assign number range to number group 1-01,2-01,03-01,4-01,5-01
WHT tax certificate for Vendor & Customers
1.     Maintain Number Group and SAP script forms
Company code/Business Place/Offtake Key/form/No.Group
2.Maintain Number Range 2007 0001 -1000
3. Assign Number range to number groups
1-01,2-02 etc.
Pls assign points if it is useful.
Govind.

I have four devices on one Apple ID, i have separate emails and phone numbers for each device but when I tried to add one to my iPod, it said that the email was already in use.

I have four devices on one Apple ID, i have seperate emails and phone numbers for each device but when I tried to add one to my iPod, it said that the email was already in use. I have tried many things and the only guess I have is that either someone else has this email as their iMessage but is fake or it wasn't taken off my old iPod when I reset it. Any ideas on what to do?

Thanks but that doesn't give me the information I need. I am putting an email on my ipod for people to contact me for iMessage and FaceTime but when I put the email in, it gives me an error saying that the email cannot be veirified because it is already in use. My Apple ID can be varified, just not the email that they will contact me with.

I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me?

I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me? The final result would be a spreadsheet telling there were 8 people from 20 to 39 years old, 14 peolple from 40 to 59 and so on...

jpqcampos wrote:
This appears to be an 'input form' using 'Radio Buttons' to select the category. Neither of these features are supported in Numbers '09.
You can input the data on one table and summarize it on a second table, but the input table will continue to hold data for each event.
And by using the Reorganize button, you can hide all but two rows of that table to approximate the appearance and performance of an input form.
Here are the two tables, Data on the left and Summary on the right. Notes below.
The grey-filled columns in both tables are 'working' columns, and may be hidden (as shown in the image below).
Data table:
D1 contains the word "TRUE" (in capital letters). (This row is always shown.)
D2 is empty, or may contain any value except "TRUE" (This row is always hidden under the Reorganize rule.)The rest of Row 2 of this table requires the data shown: a number outside the range to be counted (999), and two checkboxes, both checked.
D3 (and filled down the rest of column D): =AND(OR(B2,C2),NOT(OR(B3,C3)))
The formula returns TRUE only for the first unused row in the table (ie. the first row for which neither checkbox has been checked)
Summary table:
Column A contains labels for the age ranges to be counted.
Column B contains the same information in the form necessary for the formulas in columns C and D. They need a numeric value, and that value must be the largest acceptable value in the range to be counted.
C2 (and filled right to column D, then both filled down to row 5):
=COUNTIFS(Data :: $A,"<="&$B,Data :: B,TRUE)-SUM(C$1:C1)
Two changes from the previous example:
COUNTIFS is used to separate the Native and Foreign counts as well as the age range to be counted.
The amount subtracted from each result is the SUM of the earlier results, and includes the text value in the first cell of the column (which is interpreted by SUM as a zero).
See note below regarding my earlier formula.
When the greyed columns are hidden and the checkbox in the Reorganize pane is checked, the two tables will appear as shown below:
Close the reorganize pane, and the 'data entry form' is ready to use.
To use, enter the age first, then check one of the boxes.
As soon as one box is checked, the row will be hidden, and the next (unused) row will be shown.
Regards,
Barry
Note regarding formula in my earlier post:
The earlier formula will give erroneous results as it subtracts only the count directly above it from its count of persons in the age range 0-n.
In E2 of that table, replace "-E1" with "-SUM(E1:E$1)
Fill down to E8.
Ignore the instructions (in that post) following "Fill down to E8."
B

I used the disc and track numbers, but it won't show on my iPod as separate CDs?

Hi,
I used the disc and track numbers of get info in iTunes, and I would like to have my CDs separate like if they are 3 CDs on my iPod Classic rather then having a big long list of songs, but after using the disc and track numbers, I still don't see on my iPod which one is CD1, and etc. I took a screenshot of my iTunes. How could I have my CDs separate just like the originals?
http://imageshack.us/photo/my-images/341/89226837.jpg/
That's the screenshot.

See Corrupt iPod classic for tips if the iPod isn't working as expected and contains media that isn't in your active library.
See Grouping tracks into albums for organizational tips.
tt2

.How do I find out what Version (generation) of Ipod touch I have, as I want to know if I can download IOS 5 onto it? It was a gift so I only know the model and serial numbers but not the type

Hi, can anyone help me out with this question?
How can I find out which version of Ipod touch I have. I only have the model and serial numbers as it was a gift, but I would like to download IOS 5 if it is compatible?
Very frustrated Ipod user, any advice would be much appreciated.
Lynda.

I had the same problem because there are so many iPod models. There is a great article in Wikileaks that explains it all and also has pictures. I'm confident this answer your question.

How can I read the bootstrap files and extract the fragment-URLs and fragment-numbers in plain text?

How can I read the bootstrap files of any HDS Live stream and extract the fragment-URLs and fragment-numbers in plain text?
Could it be that it is some kind of compressed format in the bootstrap? Can I uncompress it wirh f4fpackager.exe? Could not find any download for f4fpackager.exe. I would prefere less code to do so. Is there something in Java of JavaScript, that can extract the fragment-numbers?
Thank you!

Doesn't sound too hard to me. Your class User (the convention says to capitalize class names) will have an ArrayList or Vector in it to represent the queue, and a method to store a Packet object into the List. An array or ArrayList or Vector will hold the 10 user objects. You will find the right user object from packet.user_id and call the method.
Please try to write some code yourself. You won't learn anything from having someone else write it for you. Look at sample code using ArrayList and Vector, there's plenty out there. Post in the forum again if your code turns out not to behave.

TS4213 Why can't iPhoto, Pages, Numbers, Keynote and iMovie access my iTunes Library files and Pages, Numbers, Keynote and iMovie access my iPhoto Library files now that I upgraded to '11?

Why can't iPhoto, Pages, Numbers, Keynote and iMovie access my iTunes Library files and Pages, Numbers, Keynote and iMovie access my iPhoto Library files now that I upgraded to '11?
Examples of what is going on:
1. In Pages, Numbers & Keynote, when I go to the media browser the Audio section reads "Open iTunes to populate this list" even after iTunes has been opened, .xml file has been replaced/repaired, etc AND Photo section reads "Open iPhoto to see photos from your iPhoto Library in this list" even after iPhoto Library has been replaced and new default library created.
2. In iMovie, similar thing ... when I go to add photos or music to a movie the iTunes files aren't present and the iPhoto photos are missing with similar messages as in #1.
3. In iPhoto, similar thing ... when I go to add music to a slideshow it says to "Open iTunes to populate this list".
It is shocking to me that Apple would let something as simple as a pathway link to associated library files get this messed up on an upgrade, but what's even more surprising is that with the number of people who seem to be having this particular issue (and I can tell from all the research that I've done for weeks online that there are a lot of them) that there doesn't seem to be a single clear answer to fixing it anywhere on these community support forums. Most of what I've seen is rehashed advice from outdated issues. What I need is a simple answer to how do we get these programs to look for the correct location of the photo and music files because I sure can't seem to find any logical place to do that through the programs' preferences files or the system preferences window?
Any help would be greatly appreciated.
P.S. Here's the details on the software/hardware:
MacBook Pro
Mac OS X
Version 10.7.5
2.4 GHz Intel Core 2 Duo
8 GB 1067 MHz DDR3
iTunes 11.0.4 (4)
iPhoto '11 9.4.3 (720.91)
iMovie '11 9.0.9 (1795)
Keynote '09 5.3 (1170)
Pages '09 4.3 (1048)
Numbers '09 2.3 (554)

I have the same problem on a new MacBook Pro. I have not been able to access the iTunes library from iPhoto since I got this computer. I looked in the Preferences file and deleted the com.apple.iApps.plist but there was no com.apple.iApps.lockfile so I just deleted the iAPPs.plist and rebooted the computer. Still no iTunes available in iPhoto.
All my music is in iTunes and plays. After reading the above I brought up Pages and I was able to access music and insert a track into a document.
Do you have any suggestions.

HT201304 I am trying to use an iTunes card and I keep getting an error and the numbers 5301. Any idea what can be wrong?

I am trying to use an iTunes card and I keep getting an error and the numbers 5301. Any idea what can be wrong?

AIrPlay to Apple TV before you attempt Mirroring
AirPlay Mirroring
http://support.apple.com/kb/HT5209
Trouble shooting AirPlay
http://support.apple.com/kb/TS4215

Archiving Equipments and Serial Numbers

Dear PM Experts,
I have searched alot for how to do archiving for equipments and serial numbers and i used SARA and maintained variant what so ever but at the end i got the job cancelled in the log , can anyone please tell me steps to do archiving for equipments and serial numbers in brief, I really appreciate all the great support here,
Much Thanks in advance

Hi,
[Archiving Serial Numbers|http://help.sap.com/saphelp_46c/helpdata/en/38/d2a784d02411d395c500a0c93029cf/content.htm]
[Useful Link|http://www.sapfans.com/forums/viewtopic.php?f=7&t=169672]
I have not tried this (equipment with serial number).
BADI_CCM_EQUI_ARC. This is Equipment Archiving BADI => Analyse this with your ABAPer.
Regards,
Maheswaran.

Need Suggestion to update existing EMP and ASG Numbers

Hi All,
Oracle E-Business Suite 11.5.10.2 version
Live with HR,Payroll,GL,Payables,Purchasing, Receivables,Order Management
Oralce DB 9i
Legislation: US
State mandates that no social security numbers should be
electronically transmitted outside the system. Since we have
Employee Number set as "Use National Identifier Number" in Business
Group definition, both Employee number and Assignment Numbers are
generated with National Identifiers. In most of the reports, alerts,
data files we use Employee Number/Assignment Numbers and
electronically transmit them to third parties.
This is the reason why we want to change the existing Employee
Numbers and Assignment Numbers to use Automatic Sequence numbers
rather than National Identifiers.
If anyone have done this earlier, could you please share your
experience with me. What is the best practice/solution to approach
it.
Thanks,
Sridhar

Hi,
Have you handled the case of modifying the existing users in your scheduled task or in OIM. How will the OIM know whether the user coming from flat file is an existing or a new one. If you have not, then first try to find the user and update it
This is the plain GTC Flat File connector and I have not done any configuration in OIM to determine whether user is an existing user or a new user.This connector is able to create new user successfully .
Please provide information about what are all the steps needed to configure for updating an existing user
Regards,
Madhu

I have lost my Dreamweaver MX Studio disks and serial numbers

I have lost my Dreamweaver MX Studio disks and serial numbers and the PC on which the suite was installed was destroyed. Can I download this suite and run it on my new PC?

BenleRoter wrote:
PC on which the suite was installed was destroyed.
I believe you will be getting the new computer on which Dreamweaver MX will not be compatible as it is very old. My suggestion would be to get the new version of Dreamweaver.

Figure numbering AND paragraph numbering in the same document

Hi everyone,
I have a document with both figure numbering and paragraph numbering. So let say I am in section 4, then the first paragraph would be "4.1. Introduction" and the first picture would be "Figure 4.1: Cool pics".
I created two different lists, one for the figure and another one for the text so that figure numbers and paragraph number don't conflict. However I cannot add the section number in the figure numbering since it's on the other list... I tried to have the figure numbering and paragraph numbering in the same list, but then the numbers conflict (e.g it gives 4.1 Introduction and Figure 4.2: Cool pics).
Can anyone help me, doing what I want (which is "4.1. Introduction" and "Figure 4.1: Cool pics")? Any help would be appreciated.
Thanks!
ps: I am using Indesign CS5.5 on a pc

Thanks for your answer Jump_Over, but my project is already divided into chapters (themselves divided in sections) in a book.
I found a way around by having the figure numbering in the same list as the paragraph numbering, the twist : while I use level 1 to 4 in paragraph numbering, I use level 5 for figure numbering with a numbering definition like ^1.^#, so no more conflict between numbers.
It's working fine so far...

HT1296 How can I stop and delete facebook names and phone numbers from my iphone

How can I stop facebook names and phone numbers from being downloaded to my iphone and how can I delete the ones that are already there?

A better way might be
Settings > Facebook > Contacts > turn off.
There are other Facebook settings you might want to leave on. But I also prefer to turn off Calendar there as well to keep every Facebook friends birthday from clogging up my calendar app.

The infamous Conditional Formatting and page numbers

I've been digging through these posts and I see that conditional formatting and page numbers is a common topic, but none of the posts I've seen seem to come up with an answer to my suituation:
(Apologies in advance, I know this has been covered in many previous posts, just don't seem to be able to decipher a clear answer...)
I have a client who wants a boilerplate item - the word "OVER", to signify a miltiple page report - to be printer on the botton right of the page, BUT as usual there are seeveral conditions when they want it NOT to show.
First, they wnat it to only print when a specific Source is selected. That's a database field, and I have that conditional formatting piece working,
Second, they only want it to print on ODD numbered pages, I think I can use something like MOD(SRW.GET_PAGE_NUM(x),2)=0 to determine whether or not it's an odd numbered page, but havn't been able to try it yet,
Third, if the report is only a single page they don't want it to print at all. Not sure how to accomplish this, since the holy grail of the conditional formatting seems to be the total number of pages, and none of the posts I've seen have been able to get this.
Any ideas?

The "Select All" button selects all cells that have the format you are looking at. It makes it so you can easily modify them all at once.

TDS TAN no, and aknowledgement numbers

Similar Messages

Maybe you are looking for