TE tunnel issues between IOS and IOS-XR

Hi Guys
I have a situation. The scenario (see the attached diagram) has to PE01 (IOS) connecting via a port-channel to P01 (IOS-XR), turn P01 connect to PE02 (IOS-XR). So we've configured a pseudowire between PE01 and PE02, this works fine! then we've configured a TE tunnel between PE01 and PE02, but when we chose the TE tunnel as preferred path for the PW, happens the following:
PC-A mac address appears on PE02 mac address table, however PC-B mac address doesn't appears on PE01 mac address table, so there is not connectivity between PC's at all.
It seems like the TE tunnel is causing some issue (thought TE tunnel status is okay at all), and the problem seems to be between PE01 and P01, when we take the TE tunnel from the PW preferred path, everything works fine! I'm not sure if this problem is caused by the port-channel too.
I've been looking for some software bugs in IOS 12.2(33)SRE6 and IOS-XR 4.3.1 but there is not such.
Anyone of you had this problem as well?
Marcelo

Hello.
Did you try ping inside vc between PE devices?
Could you provide relevant configuration from PE1,P,PE2 routers?
And the output you got during troubleshooting?

Similar Messages

  • IMAP Sync issues between Mavericks and iOS

    Hi,
    I have an iMac, Macbook Pro, iPad and iPhone.
    I have IMAP mail setup on all.
    Sending and Receiving works on all devices.
    Anything I send from my iMac or Macbook pro shows up in the sent folder on all devices.
    Anything I send from my iPad or iPhone only only show up in the sent folder on the respective device it was sent from.
    Any drafts I save from my iPad or iPhone totally diappear!
    Any messages I mark as junk on my iPhone or iPad I am told i can't be done
    What am I doing wrong to make everything being in proper sync with each other?
    Thanks!

    Thank you for the quick response!
    I considered using icloud drive, but Apple (and many outside sources) say not to use icloud drive unless I have Yosemite installed. (I have old apps that run on Mavericks [photoshop elements 6 among them] that may not run on Yosemite, so I'm not eager to upgrade.) The page you sent me to states that syncing between specific apps on iphone and mac on Mavericks is possible. That's what I'm looking for. I prefer to sync locally, via itunes, but if I have to use icloud I will.
    I think I'm asking a dumb question, but I really have tried to find the information and all I've found refers to menus and options that don't exist in my configuration.

  • Why can't I use WebCT chat with my computer?  I get the 'spiral of death' every time I try to type in my chat.  I have a feeling it has to do with compatibility issues between Java and Tiger.

    Why can't I use WebCT chat with my computer?  I get the 'spiral of death' every time I try to type in my chat.  I have a feeling it has to do with compatibility issues between Java and Tiger.

    Hi Elizabeth,
    Do your Mac meet any of these requirements?
    http://www.wvnet.edu/services/webct/requirements.html
    From this it appears to be PC only!???
    http://sourceforge.net/projects/awebctcclient/files/Pancake%20%28it%20own%20proj ect%20now%29/Pancake%20Console%20V1.0.0/PancakeConsole-1.0.0-src.zip/download
    Can you provide any more info on which bersion or file you have?
    Can you tell us why you need this for your use?

  • Compatibility issues between R12 and report builder 2.5

    Hi,
    I just want to know if there are issues between R12 and (Forms 4.5 and Reports 2.5)? I have been using 6i since I started in the oracle so I'm a little new to this.
    Thanks
    peopsquik

    As my understanding there is no issue for Forms 4.5 and Reports 2.5 with R12.
    You can develop report with Report 6i can be deployed with R12.You cannot use Forms 4.5, Reports 2.5 or Developer (Forms/Reports) 6i with Oracle EBs R12 as it is not certified. The only supported version is Developer 10g
    Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12 [ID 444248.1]
    Thanks,
    Hussein

  • Airport Express WiFi issues after Yosemite and iOS update

    Since the most recent software updates for OSX and iOS my WiFi has been acting up. Sometimes it works and sometimes it doesn't. I've noticed that Safari does not work most of the time, yet I can open Chrome (on either Macbook Pro, Macbook Air, or iPhone 6) and the website I was trying to access in Safari will open instantaneously. I just recently upgrade my Xfinity internet from the Performance package (25 mbps) to the Extreme package (105 mbps) and thought these issues were related to the upgrade, but we also have a Windows 8.1 hardwired and it streams consistently. I have seen a few other posts related to this issue, but have yet to find a resolution.

    bump

  • Is there a difference between ios and ios xe sintaxis?

    Hi
    I´m looking for command referece to ios xe 3.7, but don´t find nothing, I want to know if there is a difference with show commands between ios and xr
    Can someone help me?

    I believe all the command structure is identical, or at least mostly, since IOS-XE just pulled out the IOSd software component.

  • Continuity Problems between Macbook and iOS devices

    When I watch the WWDC 14 live, I was so excited about the new Continuity features. So I bought a Macbook Pro to work with my iPad Air and my iPhone 5s. However now with all my 3 devices on latest system. Mac OS X Yosemite and iOS 8.1, some features just not works for me. First of all,  when I trying to set a instant hotspot for my Macbook. It does't show up. Neither my iPad (Cellular)  or my iPhone. So I have to go to my iPhone or my iPad to set up a personal hotspot. However it works between my iPad and iPhone. I can find my personal hotspot in Setting>Wi-FI Personal hotspot. And of course both of my Macbook, iPad and iPhone are in same Apple ID and both Wi-Fi and bluetooth turned on.
    Secondly, I couldn't send SMS from my iPad via my iPhone. Again, they are both in same apple ID and same Wi-Fi condition. Weirdly I can send SMS from my Macbook and making phone call as well.
    So really, I have no idea what's going on. Could any one explain?

    Well, nevermind. It suddenly decided to start syncing, somehow! Not sure what I did to make it work though.
    Anyway, this is still not what I was expecting. The only way to synchronize what I have in iBooks with the iOS devices, is through iTunes, and I need to be in the same network, right?
    I thought this would be something more like iTunes Match, where I could have all my ebooks and PDFs up in the Cloud and download them to my devices whenever I needed them.
    Do you know if there's any app providing this type of system?
    Thanks a lot.

  • Interworking between WCCP and IOS firewall on ISR and ASR routers?

    I ran into a problem last year when running WAAS WCCP and IOS firewall IP inspection on the same 3945 router. They couldn't function at the same time. Cisco indicated that router IOS firewall and WCCP were compatible only when IOS zone-based policy configuration was used. Back then I was using IOS 15.1(1)T1 on the 3945 router and WAAS was version 4.2.3.
    I now have some sites with 2921, 3945, and ASR1002 routers that need to be both IOS firewall and WCCP for WAAS. Now with newer IOS releases, does the IOS firewall estill have to be zone-based policy configuration? Because classic classic IOS firewall is easier to configure for WAAS, just "ip inspection waas enable" command, I'd prefer the easier configuration.
    What about ASR1002 router IOS firewall with WCCP? I have never implemented that before. I was trying to find some deployment examples or configuration guides from Cisco, but was not able to.
    Thanks for any help.
    Gary

    I'm assuming you placed service group 61 and 62 on the router LAN, WAN inbound directions. Did you apply inspection to LAN to WAN direction or WAN to LAN direction?
    Did you also used WCCP and IOS firewall on ASR routers?
    Thanks a lot

  • Any soft on android for iMessages between android and ios

    I m using my ipad3 and now got a new samsung s5 so dm stuck on using imessages begoz I liked it very much
    help someone if hv any info

    Check the App Store for an app that allows texting between SMS and  your iPad. The app provider takes the SMS message and turns it into a iMessage.

  • Sync issues between Mac and Mobile Me

    Hi all,
    I'm having issues syncing between MobileMe and my Macbook Pro. It used to work perfectly, but I haven't been able to get it to sync since early August. All the changes I make between my iPhone and MobileMe work fine, but they just wont update with any changes I make on my Macbook. Equally, changes made on iPhone or MobileMe don't show on my laptop anymore.
    I've tried force syncs and resetting sync data (and transferring info from MobileMe) but none work. Is there anything else I can try?
    Thanks,

    You should ask in the MobileMe forums as this forum (iSync) has nothing to do with syncing Macs to MobileMe.

  • Curious... Syncing Issues Between iPhone and iTunes?

    Just curious... the past several months I have noted various concerns around "syncing" between iPhone and iTunes... yet don't recall any mention of whether it occurs between MAC OS or WIN hardware (desktops and or laptops). Furthermore, I am interested if anyone can comment whether these sync issues occurs mostly on TIGER or LEOPARD OS when accessing iTUNES. (Guess I should pay more attention to the noted OS field.
    I ask because I am considering an upgrade to LEOPARD by end of month and don't want to jeopardize my syncing to my iPhone if it is a LEOPARD related issue. Thank you

    I'm running Leopard and I've never experienced any sync issues.
    These discussions include mostly problems, which is what these discussions are for - a user to user support forum for technical support issues and questions.
    Which particular issue are you referring to?
    Before installing a major OS X upgrade such as Leopard over a previous OS X version, it is a good idea to create or update your existing backup of important data stored on your computer's hard drive - including your iTunes library, photos, contact info, calendar events, documents, etc. I've never experienced any problems installing a major OS X upgrade over a previous OS X version, but I always update my computer's backup immediately beforehand to be on the safe side.

  • White space issues between content and footer.

    I am having white space/page length issue between the end of my content and the footer.
    I have read the forums and tried changing the page length minium height to 800 and then I
    unchecked the sticky footer in page properties on both the master page and the content page itself.
    Here's a link to one of my pages.  http://www.ueonline.com/rohs-info.html
    This page has very little content and you can see the white space.
    Any help is appreciated.

    This may be a little dated for a reply, and I'm not 100% sure your issue is the same as mine, but I discovered that unchecking the sticky footer option in site properties solved the problem. I should note that the website I was building for a client was über simple, and while disabling that function solved the headache in my own project, it may incur unwanted results in others, depending on the complexity.
    DTA

  • Alignment Issues between dreamweaver and browser

    Hi
    Hoping someone can help, i'm trying to learn how to make
    better sites with advanced tools like apDIV's but seem to be
    running into an alignment issue. When I make the html file in
    dreamweaver I seem to have to off set the images and div tags
    inorder for the site to show up aligned properly in firefox,
    explorer, etc. I'm thinking there might be a problem in the actual
    code causing this but am not good enough yet to find it or the
    problem, any ideas or guidence would be greatly accepted. below if
    the links work is the difference I see between dreamweaver and when
    its launched in a browser.
    DreamweaverScreen
    BrowserScreen

    > over a centered frame
    You are not using frames - that's a table.
    Yes - there's a way to do this, but it will involve your
    working in code.
    Make your page left aligned by removing any centering.
    Then position your layer so that it is properly located over
    the table.
    Change this -
    </head>
    to this -
    <style type="text/css">
    #wrapper { width:760px; margin:0 auto;position:relative; }
    /* 760px will display on an 800px screen maximized browser
    window without */
    /* horizontal scrollbars. */
    </style>
    </head>
    (you may need to adjust this width so that it's consistent
    with the width of
    your centering table)
    change this -
    <body ...>
    (the ellipsis represents any other attributes that might be
    mentioned in the
    body tag, and SHOULD NOT BE INCLUDED EXPLICITLY!)
    to this -
    <body ...>
    <div id="wrapper">
    and this -
    </body>
    to this -
    <!-- /wrapper -->
    </div>
    </body>
    and see if that helps.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Vinx21" <[email protected]> wrote in
    message
    news:ge9t3e$92s$[email protected]..
    > thanks for the help osgood, I see now what my problem is
    and am just
    > wondered
    > if there was a way to place the absolute layer over top,
    in the right
    > position,
    or will have i have to remake one of the elements a
    > different way???
    >
    > thanks again, dave
    >

  • A big issue between LR2 and PSE6?

    Hello;
    Im experiencing a strange situation between PSE6 and LR2. What about to tell you it happens to me twice, so I was able to recreate and document the issue. Before I go on I want to warn you that the only way to fix it was uninstalling and installing PSE6. The repair process did not work.
    Before I describe and specify the Test Script I want to describe my system:
    Vista Home Premium SP1, PSE6 and the 30 day trial of LR2.
    Processor: Dual 2.89 MHz, 4GB of RAM, 512MB ATI Graphic Card
    2 Internal HD; 250 GB and 650 GB
    1 External HD 500GB.
    Description: After I edited a RAW picture in PSE and saved as PSD I closed PSE6 and went to LR2 to continue editing, then after some editing in LR2 I decide to do more editing in PSE6 from LR2. I closed PSE6 and get back to LR2. I opened PSE6 from the Desktop and went to the Organizer-Edit-Preferences and BOOM; I get the message Adobe Photoshop Elements 6.0 (Organizer) has stopped working CLOSE THE PROGRAM.
    Test Script:
    WARNING: If you decide to go on and test this I want to warn you that both times I had to uninstall and install PSE6.
    1. Edit a RAW picture in PSE6 and saved as PSD, exit PSE6.
    2. Edit the same PSD picture in LR2, do anything you want.
    3. Edit the PSD picture in PSE6 directly from LR2: Develop->Photo->Edit in PSE6.
    4. Chose the Default Option: Edit a Copy with Lightroom Adjustments
    5. When in PSE6 do anything or nothing to the picture and CLOSE exit from PSE6.
    6. Start PSE6 and from the Organizer go to EDIT->Preferences and chose General
    7. Now, if the problem its repeatable and its not only me you should get the message that the Organizer has Stopped working and you must have to close the program.
    Organizer has Stopped working and you must have to close the program.
    8. Since everytime that I tried to get into the Preferences PSE6 Crash I had to unistalled and installed again, I try to do the repair but in my case did not work.
    Note: I don't know if the same it's going to happen with JPG's or TIFF's, at least I don't want to test it.
    If somebody has any comments or knowledge about this please let me know. For now my Trial of LR2 has come to a stop.
    Thanks in advance.

    Hello Antonio;
    After many, many test I discovered that the problem, at least in my case it is caused by the new ACR 4.5. Please read the Thread that I post under Camera Raw. I include the link below.
    I also open two Bug Reports about this, but as usual Adobe (and other Software Companies) will never take responsability for this, until one day they release a new version with "enhancements".
    PSE6 Organizer Crash with ACR 4.5 (Vista Only?)
    http://www.adobeforums.com/webx/.3bb6a869.59b60d3e

  • Data type conversion issues between Oracle and SQL Server

    Hi there, I am using Heterogeneous Services to insert into a SQL Server database. I am running into an issue between data types regarding Oracle's VARCHAR2 and trying to insert that into a SQL Server MONEY data type. I tried using the TO_NUMBER() function to convert my VARCHAR2 to a number, but that didn't seem to help.
    Does anyone have any advice on how to work around this??
    Thanks for any help,
    ivalum21

    ORA-02047: cannot join the distributed transaction in progress
    ORA-06512: at "MY_PACKAGE_NAME", line 263
    ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
    [Generic Connectivity Using ODBC]DRV_Execute: DB_ODBC_ENGINE (1645): ;
    [Microsoft][ODBC SQL Server Driver][SQL Server]Disallowed implicit conversion
    from data type varchar to data type money, table 'tableA',
    column 'total_amount'. Use the CONVERT function to run this query. (SQL
    State: 37000; SQL Code: 260)
    ORA-02063: preceding 2 lines from SQLSERVER_LINK
    ORA-06512: at "RCDTPUMP.CAMPUSCALL_DATAPUMP_UNI", line 875
    ORA-06512: at "RCDTPUMP.CAMPUSCALL_DATAPUMP_UNI", line 791
    ORA-06512: at "RCDTPUMP.CAMPUSCALL_DATAPUMP_UNI", line 1156
    ORA-06512: at line 1
    That is what I get when I take out the TO_NUMBER()
    Message was edited by:
    ivalum21

Maybe you are looking for