Tea Buying and Blending Process mapping onto R/3

Can anybody help us in finding the right solution for the below mentioned business case for Tea Buying and Blending operation.
Required clarification
- Can SAP R/3 manage Tea Auction and Blending Process (very unique for Tea)
- Are there any third party solution integrated with R/3 available for this business case
- Is there anybody who has expertise in mapping Tea Buying and Blending Process to R/3
Background
Business - Tea Auction and Blending
Locations - 6 Buying Centers across India
- 1 Blending Unit
- 10 Packing Units
Overview
Teas are sold thru Auction Centers which are moved to the Blending Unit. Blending Unit does the blending operation and sends the blended tea to the packing units. Packing units carry out the packing operation and sells them to their distributors.
Buying Process
Teas are sold at the Auction center thru Tea Brokers. Auction centers offer teas / sells tea in a weekly cycle. Brokers provide the catalogue containing the characterstics of the tea offered in the Auction center with information on the Garden, Grade, quantity offered and the price. The teas offered by the brokers are tasted prior to deciding upon the lots to buy. Broker would submit the contract to the buyer post completion of the Auction as per the lots bought. Contract details are taken as Purchase and these teas are then transported to the Blending Unit.

I have configured kind of same process for Cheesse and Milk process........i think you can handle the Tea process same way.
First fi you don't know exactly how much you going to buy or buying is not in your hands but it is on Broker hands then use the Automatice PO creation inBcakground after GR done for this.
The Pricing oyu can define bu using different condition for grade.....and for blending process can be handle by PP using batch management
Hope this will help you

Similar Messages

Solman HP- ALM Integration and Business Process Configuration

Hello Solman Experts,
Can anyone provide me the links/docs/materials/SAP application Help/Wiki etc for Solution Manager to
HP-ALM Integration and Business Process Mapping/Configuration.
Thank you in advance and waiting for the answers.
Regards,
Eswaran

Hi
check below blog for this
End to End testing with HP ALM 11 and SAP Solution Manager 7.1
thanks
Prakhar

HT201328 I have paid Bell to unlock my old iphone4 and they have said it is now unlocked. Can I skip the back up and restore process and just buy another carriers sim card from my daugther Kodoo plan, install it and active the iphone4 on itunes account in

I have paid Bell to unlock my old iphone4 and they have said it is now unlocked. Can I skip the back up and restore process and just buy another carriers sim card from my daugther Kodoo plan, install it and active the iphone4 on itunes account in her name?
thanks
Dave

The process is as follows:
Backup the phone, Erase it, connect to iTunes for the unlock process, then your iProfile can be restored.
You can go ahead and get the SIM, bout you have to Erase the phone and connect to iTunes before it will be unlocked.

When i waned to buy and finished filling all the (*), i clicked on conifirm membership they worte this in a red color: There was a problem processing your order, please contact our Customer Service team for assistance.Middle East

when i waned to buy and finished filling all the (*), i clicked on conifirm membership they worte this in a red color:
There was a problem processing your order, please contact our Customer Service team for assistance.Middle East & North AfricaBahrain: 80081097Egypt: 08000000447Jordan/Kuwait/Lebanon/Qatar/Yemen: English +44 207 365 0735Jordan/Kuwait/Lebanon/Qatar/Yemen: Arabic/French +44 203 564 4145Oman: 80077173Saudi Arabia: 8008446638Tunisia, Morocco and Algeria: +33 157324642United Arab Emirates: 80004443085Commonthwealth of Independent States (CIS): +44 207 365 0735

Verify that everything about your Adobe ID and your country and your credit card match exactly
Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html
-Credit card https://helpx.adobe.com/utilities/credit-card.html
-wrong email https://forums.adobe.com/thread/1446019

Question about documenting process maps and form object properties

Does the new version of Workbench have a tool that allows us to print a report showing the properties of the object used in a form template or process map? For example... showing all of the properties like fonts, size, patterns, defaults, whether or not a field is required, etc...? I am also checking to see if this capability has been added to Workbench for Process Maps?

No it does not but there is a blog entry by John Briinkman that will analyze your form template and give you some of that information. Here is a link to the blog entry:
http://blogs.adobe.com/formfeed/2011/05/updated-form-report-tool.html
Paul

Buying a TV Show and then putting it onto DVD

Is there a way to buy TC shows and then burn them onto a DVD disco or does iTunes not allow you to do this

You can only backup iTunes TV shows or Movies to data DVD for storage purposes, you can't burn them to a regular playable DVD to use on other players.

"Ask to buy" and "Sign in to Approve" process is not working

Last weekend I setup Family Sharing for the first time, but the "Ask to buy" and "Sign in to Approve" process is not working. I am the Family Organizer and I created an account for my child under 13 with "Ask to buy" enabled. My child can go in to the App Store, click "Buy" for a desired app and I get a notification on my iPhone 5s... as expected. When I open the Notification I have the option to Decline or Approve. If I select Approve, a box pops up asking me to enter the password for my child's iCloud account to complete the request. (It seems odd to me that I'd have to enter his password instead of my own, but whatever.) So I enter his password and the box goes away for a second and then comes right back like I typed it wrong or something. I enter it again and again and always the same box comes back and the request is never completed. We've tried this several times over several days and always see the same behavior. I have also tried entering my password instead of his (since that makes more sense to me) but I encounter the same problem.
I have verified that I am signed in to my iCloud account and my iTunes account on my iPhone 5s. I have also verified that my son is logged in with his iCloud/iTunes account on his iPod touch, so why isn't this working? Additionally, if I disable "Ask to Buy" then I can successfully install apps on his iPod from the iPod itself.
Is it normal for the "Sign in to Approve" box to show his iCloud address instead of mine? And if so, why doesn't it complete when I enter his password? Am I missing something completely? This is driving me crazy.

Hi ,
When you click your link "Click here", the SharePoint web page with anchor will not work until refresh the page, if it's the case, you can add the javascript code to refresh the page automatically as workaround per the following similar post.
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/f7eab808-da8a-44fd-9933-f9b992f5affc/sharepoint-anchor-tags?forum=sharepointgeneralprevious
http://yalla.itgroove.net/2012/05/anchor-links-tags-in-sharepoint-2010/
<script type="text/javascript">
setTimeout(Reload,2000);
function Reload()
window.location.hash=self.document.location.hash.substring(1);
</script>
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Daniel Yang
TechNet Community Support

Ibought and downloaded iPhoto 11 onto my MacPro. To put it on my MacBook Pro, do I have to buy it again?

I have bought and downloaded iPhoto 11 onto my MacPro. Do I have to buy it again to download it onto my MacBookPro?

No just log into the App Store from the MBP and use the same Apple ID.
You;re allowed to load the software onto as many Apple computers than you own.
regards

Even mapping onto 3d object in Illustrator CS3

Having a wee bit of a problem here - I have created artwork for a display stand and, to demonstrate how this will look, I'm trying to make a 3 mockup in illustrator CS3.
I've created a top down shape for the object which I then extrude and map the image on to - this is where the problem arises! Illustrator seems to 'bunch' the mapped image around points where curves are tighter (presumably due the increase in vertices there) rather than mapping it evenly around the surface. This causes some rather undesirable warping of the image which rather ruins the effect!
Can anyone tell me a way of avoiding this?
Many thanks!

But did you have to reposition the mapped symbol, since adding anchors also add surfaces
No. I did exactly what my instructions indicated: I simply positioned the Symbol for mapping onto the front surface, with no scaling. After Illusrtator rendered the result, I selected Add AnchorPoints twice.
The distortion was due to the extended handles of the middle point which gives the front surface its concave shape. Adding anchorPoints effectively shortens the handles, thereby lessening their distortion effect. That does not necessarily add surfaces to the model. A 3D Effect model does not necessarily create additional surfaces for each "patch" defined by anchorPoints. You can see that easily by simply extruding a filled, unstroked ellipse into a cylinder with open endcaps: One surface, despite the four anchorpoints in the section.
Moreover, with the preview checkbox on, the 3D Effect interface highlights the surfaces on your model as you page through them in the Map Art dialog.
OF COURSE the model's section path needs to be drawn with some sense about what 3D Effect will have to do to it geometrically, and about the scale of the 3D model settings relative to the size and aspect ratio of the mapped artwork (thus my admonitions to that effect in my second post). One can't just willy-nilly apply elaborate automatic effects to any carelessly-drawn path and expect results to work right. But assuming appropriately-drawn sections for the extrusion, adding anchorPoints can be an effective means by which to correct distortion caused by long curve handles--just as it can also be used to more closely approximate uniform spacing of Blend steps along curves spines. The long radius concave front of a trade show backdrop is a case-in-point.
JET

Symbol not mapping onto 3d image

I'm trying to draw a coin and have successfully mapped the head onto one side of the coin, but for some reason tails isn't mapping. I did the exact same thing to tails as I did to head - I turned the vector image into a symbol and then map it onto a face. It's not a problem with the face because when i switch the positions of the heads and the tails, the heads shows up and the tails still doesn't show up.
Does anyone know what's going on?
The heads is below, and the tails simply does not show up.

But did you have to reposition the mapped symbol, since adding anchors also add surfaces
No. I did exactly what my instructions indicated: I simply positioned the Symbol for mapping onto the front surface, with no scaling. After Illusrtator rendered the result, I selected Add AnchorPoints twice.
The distortion was due to the extended handles of the middle point which gives the front surface its concave shape. Adding anchorPoints effectively shortens the handles, thereby lessening their distortion effect. That does not necessarily add surfaces to the model. A 3D Effect model does not necessarily create additional surfaces for each "patch" defined by anchorPoints. You can see that easily by simply extruding a filled, unstroked ellipse into a cylinder with open endcaps: One surface, despite the four anchorpoints in the section.
Moreover, with the preview checkbox on, the 3D Effect interface highlights the surfaces on your model as you page through them in the Map Art dialog.
OF COURSE the model's section path needs to be drawn with some sense about what 3D Effect will have to do to it geometrically, and about the scale of the 3D model settings relative to the size and aspect ratio of the mapped artwork (thus my admonitions to that effect in my second post). One can't just willy-nilly apply elaborate automatic effects to any carelessly-drawn path and expect results to work right. But assuming appropriately-drawn sections for the extrusion, adding anchorPoints can be an effective means by which to correct distortion caused by long curve handles--just as it can also be used to more closely approximate uniform spacing of Blend steps along curves spines. The long radius concave front of a trade show backdrop is a case-in-point.
JET

Having a problem with dates when I send my numbers doc to excel. dates are all out and that they have to cut and paste individual entries onto their spreadsheet. Any idea how I can prevent this

having a problem with dates when I send my numbers doc to excel. dates are all out and that they have to cut and paste individual entries onto their spreadsheet. Any idea how I can prevent this.
I'm using Lion on an MBP and Numbers is the latest version

May you give more details about what is wrong with your dates ?
M…oSoft products aren't allowed on my machines but I use LibreOffice which is a clone of Office.
When I export from Numbers to Excel and open the result with LibreOffice, the dates are correctly treated.
To be precise, dates after 01/01/1904 are correctly treated. dates before 01/01/1904 are exported as strings but, as it's flagged during the export process, it's not surprising.
Yvan KOENIG (VALLAURIS, France) mardi 3 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : http://public.me.com/koenigyvan
Please : Search for questions similar to your own before submitting them to the community
For iWork's applications dedicated to iOS, go to :
https://discussions.apple.com/community/app_store/iwork_for_ios

Hi I have an iTunes account with my uk debit card but am currently in Australia, can I buy and use an iTunes/app store gift card in AU$ or am I only allowed to acces the store in gbp£ ?

Hi I have an iTunes account with my uk debit card but am currently in Australia, can I buy and use an iTunes/app store gift card in AU$ or am I only allowed to acces the store in gbp£ ? Cheers

I had the same error when trying to update my apps on my ipod touch. I tried to input my security code numerous times to no avail. I also made sure my billing address was the same as what my bank had on file. To fix the issue I went into iTunes, logged onto the iTunes store, went to account settings and reviewed my recent purchases. Turned out that I had made a recent purchase and didn't have enough money left on my credit card to pay for it at the time. I paid off the credit card, and then input my security code once more and now it works fine. I've heard that some debit or pay as you go credit cards require a minimum balance, so make sure you have at least that amount in your account.

How can i backup my iPod Touch 4g and save my apps onto a new hard drive without having to save onto the current hard drive first?

How can i backup my iPod Touch 4g and save my apps onto a new hard drive without having to save onto the current hard drive first?
My current hard drive is filled up and i'm going to buy a new, bigger hard drive. How can i change the save and backup destination for iTunes so i can backup and transfer my purchases(apps) onto the new hard drive? Without having to backup and save my apps onto the current hard drive because there's no space left on it. Thanks!

have you tried following the steps given here on the apple's knowledge base site may be they can help you
http://support.apple.com/kb/HT1414
here is a video from youtube as well
http://www.youtube.com/watch?v=wH_1qkHkZi0
also this tutorial
http://www.imore.com/how-to-setup-backup-restore-update-use-icloud

How do I recover a "complete" folder and place it back onto the desktop screen.

This has to be a common problem experienced by all Mac desktop users. I placed
an entire blue "file folder" (the common blue folders with tab) into the "trash" and
cannot take it out or delete it. I did it by accident because I wanted to "delete" a small
file, within the "entire blue folder". Apparently I put the "whole folder" in the "trash" instead
and now cannot take it out.
I have an exact copy on my desktop already, but I don't want to delete this folder that I
placed in the "trash". For now, I just want to recover it and put it back onto the desktop.
I don't mind having two copies for now.
To be extra clear, this is the usual blue "file folder" that contains "favorites", "shared", and "devices".
Within these are "all my files", "desktop", "your personal files", "applications", etc., etc.
Within these are "photos", "albums", "pictures", "video", and miscellaneous subsets of files.
This "entire" folder containing all these items are now in the trash.
I need to know a simple "step by step" process or instructions on how to take all this
out of the trash and to put it back on the desktop where I can see it on my computer screen
as a blue "file folder".
I'm not very computer knowledgeable except to use the internet and knowing how to use
data entry software.
So it would be important to explain to me "step by step". Any small detail left out and I might mess up.
I know there must be a simple way of doing this. All I see now is a pile of papers in the "trash" bin and
no way to get out my "file folder"
I appreciate all your help.
Thank you very much.

You cannot take a folder out of the Trash to your Desktop without erasing the one on the Desktop. You need to first change the name of the folder on the Desktop. Or you can open the folder that's in the Trash and drag the files onto the Desktop assuming there aren't too many of them.
But if you have a duplicate on the Desktop why do you need to remove the one that's in the Trash?
If you feel you must take the folder out of the Trash, then you need to rename the duplicate that's on your Desktop.
If you wish to put the folder back where it was when you deleted it, then open the Trash window, select the folder, then CTRL- or RIGHT-click and select "Put Back" from the context menu.

How do we add a link to process map on the desk manual web page?

Hi: The Tutor demo I used shows a hyperliink to process flows and one can drill down to see the connections between the processes at a high level so the auditor to navigate the different processes and sub-processes. Is there somewhere in the documentation that can show me how to include this? I created a process map document, using the steps in the documentation, saved it with the prefix RE and published it, created a new index, but sadly I can't seem to get a link to this on the main web page. Also when I click the hyperlinks on the Process flow doc, I get a web page error although I used a valid PR doc name. Any help would be greatly appreciated. Is there any additional documentation on publishing the maps and displaying them on the web pages? Thanks so much, Heather

Hi Emily: I'm finding it difficult to understand how the SR suggestions answer my inquiry. Is there any way you can take a look at SR 3-7354806811? , Heather

Tea Buying and Blending Process mapping onto R/3

Similar Messages

Maybe you are looking for