Teaming support for MSSQL

Our Network administrator has been told that there is no support for MSSQL as the database for Teaming on Linux. Only MySQL is supported.
This is no customer support, it is denial of choice for mature, secure and manageable database for Teaming, which we chose over Sharepoint.
Stu

Originally Posted by sgross1000
Our Network administrator has been told that there is no support for MSSQL as the database for Teaming on Linux. Only MySQL is supported.
This is no customer support, it is denial of choice for mature, secure and manageable database for Teaming, which we chose over Sharepoint.
Stu
Stu, Thanks for your posting and question. I have checked with one of my technical people and MS SQL is not supported on Linux so therefore, Teaming would need another database on the Linux server. However, you can point Teaming to another MS Server that is running MS SQL and that should work fine. There are more details about the requirements at Novell Doc: Kablink Teaming 2.1 Installation Guide - Teaming Server Requirements
Let me know ifyou have any other questions,
Thanks,
Brad Palmer

Similar Messages

Wiki & blogs 10gr3 support for MSSQL

I am deploying Webcenter 10gr3 wike and blogs on weblogic 10gr3. I am using Microsoft SQL as my database. The script included in the owc_wiki war file is for use on Oracle DB only.
1 - Is there a script to create the schema on MSSQL
OR
2 - Is there a way to convert Oracle.sql script to be used on MSSQL
thank you,
Enzo

I believe that non-Oracle databases are not supported for a WebCenter installation. [WebCenter 11g documentation|http://download.oracle.com/docs/cd/E12839_01/install.1111/e12001/install.htm#CHDFJAHB] explicitly states that it requires an Oracle database, I was unable to find a similar document for 10g but I assume this requirement hasn't changed.
Regards,
Joonas

Confirm no support for MSSQL 2008 before reverting to older EM version

Before I resort to installing EM Grid Control (11.1.0.1), I want to confirm that I have correctly read that EM12C does NOT support monitoring of MSSQL 2008. I understand that MSSQL 2008 R2 is certified with EM12C but, it appears that monitoring the original MSSQL 2008 is not.
Also, I'm a bit nervous about using EM Grid Control since it appears to have been a one-and-only version. Would I be smarter to go back to one of the EM10 versions?
This will be a new install, not an upgrade, so I hate to start out with an outdated EM tool but, I have to be able to monitor MSSQL 2008.
TIA,
Jeri

I have received a response from MOS to my original SR which confirms that EM12C is not certified for monitoring MSSQL 2008. For those who may possibly be interested in clarification of other OS and/or MSSQL versions with various flavors of EM, I've included below the full SR response details:
"The 12cR1 and 12cR2 Cloud Control are only certified to monitor two versions of Microsoft SQL Server : 2005 and 2008 R2
The 12cR2 is certified with these 3 Windows OS versions : 7,2008 R2,2003 on 64-bit platform where as the 12cR2 is certified with 4 versions of Windows OS version: 7,2008 R2,2008,2003
The 11g Grid Control is certified to monitor 7 versions of Microsoft SQL Server (including 2008) : 2008 R2 Cluster,2008 R2,2008 Cluster,2008,2005 Cluster,2005,2000
Also 11g Grid Control certified with 4 versions of Windows platform : 7,2008,2003 R2,2003"
The analyst who provided this information was also kind enough to open another SR on my behalf which will hopefully yield the answer to my other question- whether deploying 11g Grid Control is the best option for my environment or whether one of the EM10 versions might be a better choice. Unless someone else here is interested in that answer too, I won't update this post further with that information.
Thanks, Jeri

Feature request: Support for {table abbr} and {table} in Table scripts

Hi Data Modeler Team,
support for {table abbr} and {table} in table scripts ("Table properties"->"Scripts"->All four tabs) would be greatly appreciated as it makes it easier to use boilerplate SQL in these areas.
Is it possible to add this feature to one of the upcoming releases?
Thank you,
Blama

Hi,
I've logged an enhancement request on this.
Thanks,
David

No Adobe support for CC Team Members if you have installed Parallels on your Mac

No Adobe support for CC Team Members if you have installed Parallels on your Mac
First let me make it clear my iMac is running native OS X 10.8.5 and all Adobe Creative Cloud Apps are install on the iMac running natively in the OS X system environment. I only have Parallels Desktop 8 for Mac installed to run Microsoft Office software in Windows 7 when needed (because PowerPoint for Mac sucks big time compared to the PC version)… absolutely no Adobe CC Apps have been installed on the Parallels virtual PC environment.
I have been having problems with Creative Cloud Desktop not updating so I uninstalled it and tried to install the latest version from Adobe. I then get the following error:
We've encountered the following issues:
There seems to be a problem accessing a critical file/directory during download. For troubleshooting tips. please visit our customer support page. (Error code: 204)
[retry] [cancel]
This has happened all last week. Because we have been so busy at work I waited until the weekend to contact the 24/7 chat support.
This was going well. I was sharing my desktop with the agent who was adjusting the permissions of some folder. The problem came when he launched chrome on Parallels and not on the MAC and tried to install the PC EXE version of CC desktop. When I pointed this out to the Agent he instantly stop the screen share and stated in the chat box that virtual computers are not supported and I must find my own solution without giving me an opportunity to explain.
Every time I tried to start the chat again I was cut-off while trying to explain that Adobe CC was running natively under a native OS X and the Virtual PC was a separate to this
Only after my 4th attempt (having per cut an pasted my arguement into the chat box) did a get any further. The Agent refused to continue to try and fix my problem but did say the Adobe engineers are aware of the "204" error
Has anyone else had this "204" error installing Creative Cloud Desktop or can direct me to a solution it would be much appreciated

Unfortunately I am still getting the 204 error
I download the Creative Cloud Desktop App at home and brought it into work to install — which failed
I then tried to install the same file on the only Mac in the office not on Creative Cloud and it installed with out any problems
I then tried plugging my iMac into the same ethernet socket incase it was a problem with the ethernet socket. No luck it still had the 204 error
These are the Adobe download log files which show errors but they me nothing to me
DLM.log
07/01/14 08:15:48:723 | [INFO] | | | | | | | 1743186 | *******************start of Download****************
07/01/14 08:15:48:723 | [INFO] | | | | | | | 1743186 | GDE Version is 2.0.0.13 (BuildVersion: 2.0; BuildDate: Thu Jan 09 2014 20:38:50 )
07/01/14 08:15:48:724 | [INFO] | | | | | | | 1743186 | The file to be downloaded is https://prod-rel-ffc.oobesaas.adobe.com/adobe-ffc-external/core/v1/applications?name=Creat iveCloud&name=CCLBS&osVersion=10.8.5&platform=osx10
07/01/14 08:15:48:724 | [INFO] | | | | | | | 1743186 | Going to download the file at /tmp/B58E0DB2-C6AD-4480-B614-874A46E27582/applications.xml
07/01/14 08:15:48:825 | [INFO] | | | | | | | 1743186 | Preference: Client has set the preference for single stream download
07/01/14 08:15:50:036 | [INFO] | | | | | | | 1743190 | **File download complete.**
07/01/14 08:15:50:537 | [INFO] | | | | | | | 1743182 | *******************End****************
07/01/14 08:15:50:690 | [INFO] | | | | | | | 1743203 | *******************start of Download****************
07/01/14 08:15:50:690 | [INFO] | | | | | | | 1743203 | GDE Version is 2.0.0.13 (BuildVersion: 2.0; BuildDate: Thu Jan 09 2014 20:38:50 )
07/01/14 08:15:50:690 | [INFO] | | | | | | | 1743203 | The file to be downloaded is https://ccmdls.adobe.com/AdobeProducts/KCCC/1/osx10/packages/ACCC_2_6_PDIMPackage_393/mani fest.xml
07/01/14 08:15:50:690 | [INFO] | | | | | | | 1743203 | Going to download the file at /manifest.xml
07/01/14 08:15:50:791 | [INFO] | | | | | | | 1743203 | Preference: Client has set the preference for single stream download
07/01/14 08:15:51:900 | [ERROR] | | | | | | | 1743206 | An error has occurred while renaming the temporary named downloaded file.
07/01/14 08:15:52:213 | [INFO] | | | | | | | 1743182 | *******************End****************
LBS.log
07/01/14 08:15:43:357 | [INFO] | | ACC | LBS | ApplicationFacade | | | 1742865 | ****************Starting LBS workflow*******************
07/01/14 08:15:43:361 | [INFO] | | Download | LBS | ProductInfo | | | 1742865 | Product Sap Code not specified in the product information file
07/01/14 08:15:43:361 | [INFO] | | Download | LBS | ProductInfo | | | 1742865 | Applet Version not specified in the product information file
07/01/14 08:15:43:361 | [INFO] | | Download | LBS | ProductInfo | | | 1742865 | Applet ID not specified in the product information file
07/01/14 08:15:43:361 | [INFO] | | Download | LBS | ProductInfo | | | 1742865 | Product locale not specified in the product information file
07/01/14 08:15:43:362 | [INFO] | | Download | LBS | ProductInfo | | | 1742865 | Product name not specified in the product information file
07/01/14 08:15:43:362 | [INFO] | | Download | LBS | LBSUtils | | | 1742865 | Launching LBS in elevated mode
07/01/14 08:15:48:442 | [INFO] | | ACC | LBS | ApplicationFacade | | | 1743172 | ****************Starting LBS workflow*******************
07/01/14 08:15:48:446 | [INFO] | | ACC | LBS | WorkflowManager | | | 1743172 | LBS launched in LEGACY mode
07/01/14 08:15:48:524 | [INFO] | | Download | LBS | SystemCheck | | | 1743182 | System OS Version - major = 10, minor = 8, bugFix = 5
07/01/14 08:15:48:524 | [INFO] | | ACC | LBS | WorkflowManager | | | 1743182 | ACCC System requirements check passed
07/01/14 08:15:48:546 | [INFO] | | Download | LBS | ProductInfo | | | 1743182 | Product Sap Code not specified in the product information file
07/01/14 08:15:48:546 | [INFO] | | Download | LBS | ProductInfo | | | 1743182 | Applet Version not specified in the product information file
07/01/14 08:15:48:546 | [INFO] | | Download | LBS | ProductInfo | | | 1743182 | Applet ID not specified in the product information file
07/01/14 08:15:48:547 | [INFO] | | Download | LBS | ProductInfo | | | 1743182 | Product locale not specified in the product information file
07/01/14 08:15:48:547 | [INFO] | | Download | LBS | ProductInfo | | | 1743182 | Product name not specified in the product information file
07/01/14 08:15:48:547 | [INFO] | | ACC | LBS | WorkflowManager | | | 1743182 | Bootstrap LBS is successful
07/01/14 08:15:48:565 | [INFO] | | ACC | LBS | WorkflowManager | | | 1743182 | Bootstrapper Lock acquired
07/01/14 08:15:48:583 | [INFO] | | ACC | LBS | WorkflowManager | | | 1743182 | LBS Lock acquired
07/01/14 08:15:48:604 | [INFO] | | ACC | LBS | WorkflowManager | | | 1743182 | Deployment lock check passed
07/01/14 08:15:48:622 | [INFO] | | ACC | LBS | WorkflowManager | | | 1743182 | The resolved URL for package service is https://prod-rel-ffc.oobesaas.adobe.com/adobe-ffc-external/core/v1/applications?name=Creat iveCloud&name=CCLBS&osVersion=10.8.5&platform=osx10
07/01/14 08:15:50:538 | [INFO] | | ACC | LBS | WorkflowManager | | | 1743182 | Successfully downloaded application xml at path /tmp/B58E0DB2-C6AD-4480-B614-874A46E27582/applications.xml
07/01/14 08:15:50:588 | [ERROR] | | ACC | LBS | WorkflowManager | | FileUtils | 1743182 | Error Failed open the dylib /Applications/Utilities/Adobe Creative Cloud/utils/AdobePIM.dylib while getting its version
07/01/14 08:15:50:588 | [ERROR] | | ACC | LBS | WorkflowManager | | | 1743182 | Failed to get the PIM version from location: /Applications/Utilities/Adobe Creative Cloud/utils/AdobePIM.dylib
07/01/14 08:15:50:588 | [ERROR] | | ACC | LBS | PDM | PackageDownloadManager | | 1743182 | Failed to create folder at temp location for download operations
07/01/14 08:15:51:900 | [WARN] | | ACC | LBS | PDM | PDMWorkflowManager | | 1743206 | A user retryable error has occured while downloading the file. errotType = -100 extendedErrorCode = 0
07/01/14 08:15:51:910 | [WARN] | | ACC | LBS | PDM | PackageDownloadManager | | 1743203 | Manifest file could not be downloaded
07/01/14 08:15:51:910 | [INFO] | | ACC | LBS | PDM | | | 1743203 | File already exist. This should not happen because packages is downloaded in new GUID folder and file is send by client so should not be there already.
07/01/14 08:15:52:213 | [ERROR] | | ACC | LBS | WorkflowManager | | | 1743182 | Failed in DOWNLOAD PIM
07/01/14 08:15:57:938 | [INFO] | | Download | LBS | ETS | | | 1743172 | Waiting for the async thread to get the task completed
07/01/14 08:15:57:939 | [INFO] | | Download | LBS | ETS | | | 1743185 | Async thread is completed. Now exiting from function.
07/01/14 08:15:57:949 | [INFO] | | ACC | LBS | ApplicationFacade | | | 1743172 | ACC installation end with exit code: 204
07/01/14 08:15:57:949 | [INFO] | | ACC | LBS | ApplicationFacade | | | 1743172 | ****************Closing LBS workflow*******************
07/01/14 08:15:57:959 | [INFO] | | ACC | LBS | ApplicationFacade | | | 1742865 | ****************Closing LBS workflow*******************

TS2446 Is there such a thing as Apple Support Team asking for my email and password?

Is there such a thing as Apple Support Team asking for my email and password?

No.
It's a scam. Delete it.

Selective XML Index feature is not supported for the current database version , SQL Server Extended Events , Optimizing Reading from XML column datatype

Team , Thanks for looking into this ..
As a last resort on optimizing my stored procedure ( Below ) i wanted to create a Selective XML index ( Normal XML indexes doesn't seem to be improving performance as needed ) but i keep getting this error within my stored proc . Selective XML
Index feature is not supported for the current database version.. How ever
EXECUTE sys.sp_db_selective_xml_index; return 1 , stating Selective XML Indexes are enabled on my current database .
Is there ANY alternative way i can optimize below stored proc ?
Thanks in advance for your response(s) !
/****** Object: StoredProcedure [dbo].[MN_Process_DDLSchema_Changes] Script Date: 3/11/2015 3:10:42 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- EXEC [dbo].[MN_Process_DDLSchema_Changes]
ALTER PROCEDURE [dbo].[MN_Process_DDLSchema_Changes]
AS
BEGIN
SET NOCOUNT ON --Does'nt have impact ( May be this wont on SQL Server Extended events session's being created on Server(s) , DB's )
SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED
select getdate() as getdate_0
DECLARE @XML XML , @Prev_Insertion_time DATETIME
-- Staging Previous Load time for filtering purpose ( Performance optimize while on insert )
SET @Prev_Insertion_time = (SELECT MAX(EE_Time_Stamp) FROM dbo.MN_DDLSchema_Changes_log ) -- Perf Optimize
-- PRINT '1'
CREATE TABLE #Temp
EventName VARCHAR(100),
Time_Stamp_EE DATETIME,
ObjectName VARCHAR(100),
ObjectType VARCHAR(100),
DbName VARCHAR(100),
ddl_Phase VARCHAR(50),
ClientAppName VARCHAR(2000),
ClientHostName VARCHAR(100),
server_instance_name VARCHAR(100),
ServerPrincipalName VARCHAR(100),
nt_username varchar(100),
SqlText NVARCHAR(MAX)
CREATE TABLE #XML_Hold
ID INT NOT NULL IDENTITY(1,1) PRIMARY KEY , -- PK necessity for Indexing on XML Col
BufferXml XML
select getdate() as getdate_01
INSERT INTO #XML_Hold (BufferXml)
SELECT
CAST(target_data AS XML) AS BufferXml -- Buffer Storage from SQL Extended Event(s) , Looks like there is a limitation with xml size ?? Need to re-search .
FROM sys.dm_xe_session_targets xet
INNER JOIN sys.dm_xe_sessions xes
ON xes.address = xet.event_session_address
WHERE xes.name = 'Capture DDL Schema Changes' --Ryelugu : 03/05/2015 Session being created withing SQL Server Extended Events
--RETURN
--SELECT * FROM #XML_Hold
select getdate() as getdate_1
-- 03/10/2015 RYelugu : Error while creating XML Index : Selective XML Index feature is not supported for the current database version
CREATE SELECTIVE XML INDEX SXI_TimeStamp ON #XML_Hold(BufferXml)
FOR
PathTimeStamp ='/RingBufferTarget/event/timestamp' AS XQUERY 'node()'
--RETURN
--CREATE PRIMARY XML INDEX [IX_XML_Hold] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index
--SELECT GETDATE() AS GETDATE_2
-- RYelugu 03/10/2015 -Creating secondary XML index doesnt make significant improvement at Query Optimizer , Instead creation takes more time , Only primary should be good here
--CREATE XML INDEX [IX_XML_Hold_values] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index , --There should exists a Primary for a secondary creation
--USING XML INDEX [IX_XML_Hold]
---- FOR VALUE
-- --FOR PROPERTY
-- FOR PATH
--SELECT GETDATE() AS GETDATE_3
--PRINT '2'
-- RETURN
SELECT GETDATE() GETDATE_3
INSERT INTO #Temp
EventName ,
Time_Stamp_EE ,
ObjectName ,
ObjectType,
DbName ,
ddl_Phase ,
ClientAppName ,
ClientHostName,
server_instance_name,
nt_username,
ServerPrincipalName ,
SqlText
SELECT
p.q.value('@name[1]','varchar(100)') AS eventname,
p.q.value('@timestamp[1]','datetime') AS timestampvalue,
p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') AS objectname,
p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') AS ObjectType,
p.q.value('(./action[@name="database_name"]/value)[1]','varchar(100)') AS databasename,
p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') AS ddl_phase,
p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') AS clientappname,
p.q.value('(./action[@name="client_hostname"]/value)[1]','varchar(100)') AS clienthostname,
p.q.value('(./action[@name="server_instance_name"]/value)[1]','varchar(100)') AS server_instance_name,
p.q.value('(./action[@name="nt_username"]/value)[1]','varchar(100)') AS nt_username,
p.q.value('(./action[@name="server_principal_name"]/value)[1]','varchar(100)') AS serverprincipalname,
p.q.value('(./action[@name="sql_text"]/value)[1]','Nvarchar(max)') AS sqltext
FROM #XML_Hold
CROSS APPLY BufferXml.nodes('/RingBufferTarget/event')p(q)
WHERE -- Ryelugu 03/05/2015 - Perf Optimize - Filtering the Buffered XML so as not to lookup at previoulsy loaded records into stage table
p.q.value('@timestamp[1]','datetime') >= ISNULL(@Prev_Insertion_time ,p.q.value('@timestamp[1]','datetime'))
AND p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') ='Commit' --Ryelugu 03/06/2015 - Every Event records a begin version and a commit version into Buffer ( XML ) we need the committed version
AND p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
AND p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
AND p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') <> 'Replication Monitor' --Ryelugu : 03/09/2015 We do not want any records being caprutred by Replication Monitor ??
SELECT GETDATE() GETDATE_4
-- SELECT * FROM #TEMP
-- SELECT COUNT(*) FROM #TEMP
-- SELECT GETDATE()
-- RETURN
-- PRINT '3'
--RETURN
INSERT INTO [dbo].[MN_DDLSchema_Changes_log]
[UserName]
,[DbName]
,[ObjectName]
,[client_app_name]
,[ClientHostName]
,[ServerName]
,[SQL_TEXT]
,[EE_Time_Stamp]
,[Event_Name]
SELECT
CASE WHEN T.nt_username IS NULL OR LEN(T.nt_username) = 0 THEN t.ServerPrincipalName
ELSE T.nt_username
END
,T.DbName
,T.objectname
,T.clientappname
,t.ClientHostName
,T.server_instance_name
,T.sqltext
,T.Time_Stamp_EE
,T.eventname
FROM
#TEMP T
/** -- RYelugu 03/06/2015 - Filters are now being applied directly while retrieving records from BUFFER or on XML
-- Ryelugu 03/15/2015 - More filters are likely to be added on further testing
WHERE ddl_Phase ='Commit'
AND ObjectType <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
AND ObjectName NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
AND T.Time_Stamp_EE >= @Prev_Insertion_time --Ryelugu 03/05/2015 - Performance Optimize
AND NOT EXISTS ( SELECT 1 FROM [dbo].[MN_DDLSchema_Changes_log] MN
WHERE MN.[ServerName] = T.server_instance_name -- Ryelugu Server Name needes to be added on to to xml ( Events in session )
AND MN.[DbName] = T.DbName
AND MN.[Event_Name] = T.EventName
AND MN.[ObjectName]= T.ObjectName
AND MN.[EE_Time_Stamp] = T.Time_Stamp_EE
AND MN.[SQL_TEXT] =T.SqlText -- Ryelugu 03/05/2015 This is a comparision Metric as well , But needs to decide on
-- Peformance Factor here , Will take advise from Lance if comparision on varchar(max) is a vital idea
--SELECT GETDATE()
--PRINT '4'
--RETURN
SELECT
top 100
[EE_Time_Stamp]
,[ServerName]
,[DbName]
,[Event_Name]
,[ObjectName]
,[UserName]
,[SQL_TEXT]
,[client_app_name]
,[Created_Date]
,[ClientHostName]
FROM
[dbo].[MN_DDLSchema_Changes_log]
ORDER BY [EE_Time_Stamp] desc
-- select getdate()
-- ** DELETE EVENTS after logging into Physical table
-- NEED TO Identify if this @XML can be updated into physical system table such that previously loaded events are left untoched
-- SET @XML.modify('delete /event/class/.[@timestamp="2015-03-06T13:01:19.020Z"]')
-- SELECT @XML
SELECT GETDATE() GETDATE_5
END
GO
Rajkumar Yelugu

@@Version : ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Microsoft SQL Server 2012 - 11.0.5058.0 (X64)
   May 14 2014 18:34:29
   Copyright (c) Microsoft Corporation
   Developer Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
(1 row(s) affected)
Compatibility level is set to 110 .
One of the limitation states - XML columns with a depth of more than 128 nested nodes
How do i verify this ? Thanks .
Rajkumar Yelugu

I bought a team license for two computers, the purchase was recorded on the credit card and the amount recorded in the making, but was unable to validate the association staff . I received an email stating that Adobe could not release the payment and that

I bought a team license for two computers, the purchase was recorded on the credit card and the amount recorded in the making, but was unable to validate the association staff .
I received an email stating that Adobe could not release the payment and that I should validate the method of payment , tried to insert another card number but the system does not accept the security VAT reporting error message. How do I validate my license with association staff and confirm the payment card?

Hi Daniel,
For any sort of payment related matter, kindly contact our support team via: http://helpx.adobe.com/in/contact.html?step=CCSN_adobe-id-signing-in_stillNeedHelp
If you are unable to use chat option kindly try below mentioned steps.
Try different browser.
Delete cookies and cache
If you are still not able to chat, Kindly reply with the below mentioned information.
OS version:
Browser Version:
You can also try: http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
Thanks,
Atul Saini

Feature request: Support for Multiple Libraries (like in iMovie)

From the threads, I can tell this topic was raised by many for many years. I would like to propose support for multiple iPhoto libraries -- or more specifically, the ability to distribute media across different storage devices.
There is a huge gap between my spacially limited MBP 250 GB SSD and my external 4 TB HDD. I am aware that I can juggle two separate libraries in iPhoto but it's just not practical and the moving of media between the libraries is not a simple drag and drop effort but involves exporting and importing with me having to clean up on one side or the other.
iMovie has had support for several libraries for a long time presumably because the sheer size of media in the video realm gave the iMovie team little choice.
I can't be the only one having this itch, right?

Again, you need to clarify your terms
Aperture can move master photos files around. With Aperture you can write additional metadata to the original file.
You don't need multiple libraries to thematically arrange photos, though. A simple keywordign system will do that.
So in Aperture I don't have to restart into different libraries?
You can have all your photos in a sinble library with the master files stored off-disk easily. You can relocate them from disk to disk too. However, if you;re doing presentations that is probably not necessary if you generate good quality previews. I'd ask about these things on the Aperture forum for more.

Adobe recommends: Enhanced support for CSS3 in Dreamweaver CS5.5

Over the past week, we publicized some high-value content from adobe.com and other community sites. Hopefully you enjoyed these posts and found the resources useful. Today is our last day of the "Adobe Recommends" series.
Continuing our trip along the CSS highway, we now move to CSS3 with our next recommendation, by Preran Kurnool:
Enhanced support for CSS3 in Dreamweaver CS5.5
This blog post takes you through using box shadow, text shadow, border radius, and border image properties in Dreamweaver CS5.5.
Give it a spin and let us know what you think!
Previous recommendation threads:
Use Dreamweaver CS 5.5 to package your web application for iOS and Android devices
Customizing a Spry Menu Bar widget
Spry Menu Bar resources
Layout 101
CSS page layout basics
New CSS features in Dreamweaver CS5
Automatically attaching style sheets to new documents

Aegis Kleais wrote:
Sorry, Al, but I couldn't disagree more. Where I respect the fact that, as coders, we're rather ingrained with our workflow processes and, at times, hesitant to change, I've found LESS' benefits to be very worthwhile.
No need to apologize. Preprocessing is a topic on which there are differing opinions. You have one. I have one. There are advocates:
http://blog.urbaninsight.com/2012/04/12/ten-reasons-you-should-be-using-css-preprocessor
There are those who are not sold:
http://blog.millermedeiros.com/the-problem-with-css-pre-processors/
http://www.skybondsor.com/blog/css-preprocessors
There are those mostly sold:
http://css-tricks.com/musings-on-preprocessing/
There are even those who have been converted (but who might reverse at some later point):
http://cognition.happycog.com/article/preprocess-this
Heck, even I might be converted someday - or not
Bottom line for me, right now? I know I can write CSS that is better than most, more efficient than most, and easier to follow than most, and a preprocessor would add unwanted complexity. But that's for me. For someone not able to be organized intutively, or for a large - but carefully coordinated - team, a preprocessor could be a positive.
But not for me.
There are evolving trends - popular aspects of the technology that may and should find themselves being adapted into CSS. But I've been around this business as long as CSS has. I've seen buzzwords and trends and I've historically been spot-on in predicting the one that will stick. I think preprocessing will stick - but only insofar as it will be a catalyst for features in future versions of CSS. As a separate technology it makes no sense - to me

Does BC4J works as ORM (eg: Toplink) to support for MSQL Server / Oracle DB

Hi,
My current product is running on Struts 1.1, Apache Cocoon(for reports generation), JDBC & MS SQL Server environment.
To provide the more flexibility & user friendliness to the application I have a proposal for the re-development of the application with ADF 11g.
But the main concern here is, the current product is running on MS Sql Server DB, now the product team has a future plan to migrate it to Oracle Database. In view of this DB migration, the frame work/environment that I choose for the re-development must support for very less code changes (at least from the Application Business logic/Queries prospective)
Here I have two options for the re-development
1. ADF 11g + Top-link (ORM) + MS Sql Server / Oracle DB
2. ADF 11g + BC4J + MS Sql Server / Oracle DB
Plz suggest me, out of these two options which one suits for my requirement & better in performance too

Check this out:
http://www.oracle.com/technology/products/jdev/collateral/papers/11/certification/index.html#Databases
Also
http://www.oracle.com/technology/products/jdev/11/how-tos/multidatabaseapp.html
Have a nice day

GroupWise 7.0 API Gateway is supported for Exchange 2007?

Can someone confirm that GroupWise 7.0 API Gateway is supported for Exchange 2007?
I found a note in a guide that stated it was not YET supported as of 1/27/2008.

bwalker2,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Future support for C++0x in Sun Studio

I've recently been having to defend my choice of using the sun studio compiler against several gcc advocates here in the office. The one reasonable issue they keep bringing up is when the upcoming C++0x (more like C++1x or even C++2x at the pace the standards committee is operating at) features will be available in complete fashion in sun studio. They say, and I have to begrudgingly agree, that judging by the amount of time it took studio to support boost (template templates, certain partial template specializations, etc), there could be a long delay between the release of gcc's C++0x support and that of studio's.
I understand that many of the new features of C++0x, even from initial glance, appear to be quite complicated, especially lambda functors and their associated []/auto return types, variadac template parameters and class concept checking. In addition, I understand gcc has an unfair advantage so to speak since it is being used as the test bed for many of the committee proposal submitter's proof-of-concept implementations (the variadic template parameter feasibility implementation written for gcc comes to mind).
Could a developer please assuage my fears and inform me that the studio team has a roadmap/timeframe in place to release a studio that fully supports the new language-level features in a reasonably competitive time frame? It apparently will be the responsibility of the STLPort team to essentially copy many of boost's libraries (shared_ptrs, random numbers, type_traits) and rename them and move them to the std namespace and also supply the new unordered<> containers, to name a few.
I for one can't wait until boost::mpl, boost::fusion, boost::format and others are all reduced from 10's of 1000's of lines of pre-processor generated crufty template definitions to a single variadic template declaration. Also, I won't feel quite so willfully derelict to efficient code every time i bust out an std::for_each and drop in a boost::bind generated functor and instead can use a lambda function with the various efficiency gains ranging from direct referencing to the stack variables passed in as the closure arguments to the ability for the compiler to actually inline the body of the lambda function where appropriate.
I'm in no way trying to accuse you compiler developers of being slow to implement features, but just would like to be assured that there is nothing to worry about and there is a plan and current work being done on the required features. I know it's still a couple of years off, but I personally can't wait to replace hundreds of lines of boost::bind() calls with their more efficent lambda equivalent, and in addition clean up interfaces that could have used boost::bind if it weren't for the unacceptable overhead introduced often executed blocks of code.
Thanks,
Chris Knight - Faithful sun studio user through at least 2 major name changes and since at lest when it was called Forte 4.2 and RougeWave and classicIO libraries roamed the earth in vast quantities.
P.S. I truly fear that the other 3 major compilers (gnu, intel, ms) will be out the door with C++0x in around the same time and boost will then willingly drop support for the sun compiler if it doesn't support the required language features at that time as they had no problem not supporting studio at all until Studio 12 so I'm sure as soon as the 3 compilers they run nightly tests with support it, they'll be just as eager to
make use of the new features as I am.
This leaves someone who has based their entire system on Solaris + SunStudio + Boost in a potentially undesirable situation. Solaris is far too stable and Linux to ever-changing to ever consider Linux as a platform for critical systems yet the idea of running g++ on Solaris w/ gcc's propensity to change their ABI on a weekly basis gives me immediate heartburn.
Thanks again.

You raise some very good points, and believe me, we are even more aware of them than you are!
Short answer: We are planning to bring out a compiler conforming to C++0X in a timely fashion.
Longer answer:
Right now, we are working on providing binary compatibility with g++ as an option in the next compiler release. When we are done, you will be able to use g++ headers with Sun C++, and link the code with binaries created by g++. The first implementation will be on Linux. (Which versions of g++ and which versions of Linux? Stay tuned.)
Implementing all the new features of C++0X will require a re-design of parts of the compiler front end. The current compiler organization does not support "concepts", for example. (We've been looking for an excuse to re-design the front end for a while, and C++0x is not just an excuse -- it's a requirement.) With the g++ ABI work done, we'll ready to start the re-design, and begin to implement C++0x features.
We won't release an official (stable, fully-supported) product with C++0X features until the standard is final. Until then, any feature could change in unpredictable ways. We got caught by that problem with C++ 4.2 and C++98 -- we implemented what we thought were final features that changed dramatically after we released the compiler. We won't do that again. Compiler stability is one of our most important considerations.
Beginning some time next year, we expect to have Express releases with some C++0X features. Express releases are our way of providing compilers with experimental features that might not be stable yet. It gives our customers a chance to try them out and provide feedback before they become part of a stable release. That is to say, a feature flagged as experimental is subject to change, and compatibility with other Express or official releases is not guaranteed. We can therefore fix bugs and catch up with late changes in the Standard as necessary.
We have not yet done all the planning for our C++0X compiler, so I can't give you any estimates about specific feature availability and time frames. When we are farther along, we'll post the road map on a public site, and I'll announce it here.
Steve Clamage
Sun C++ Team

Can i use create function for MSSql scalar and table valude function.

Hi,
1) Can i use create function for MSSql scalar and table valued function?
2) How many type of user defined function are there in oracle 11g express?
3) And can i reture any "type" form user defined function?
yourse sincerely

944768 wrote:
Q1)That means even if i return predefined types like integer, varchar2 then also PGA is used ?The data type does not determine where the variable is stored. A string (called a varchar2 in Oracle) can be stored in stack space, heap space, on disk, in a memory mapped file, in a shared memory, in an atom table, etc.
It is the who and what is defining and using that string, that determines where and how it is stored.
The Oracle sever supports 2 languages in PL/SQL. The PL (Programming Logic) language is a procedural/declarative language. It is NOT SQL. SQL is integrated with it. The PL/SQL engine uses private process memory (PGA). So PL/SQL variables exist in the PGA (but there are exceptions such as LOBs).
Q2) So please suggest me solution in oracle.Sounds to me you are looking at how to implement a T-SQL style function as an Oracle function, and once implemented, do joins on the function.
Do not use PL/SQL in SQL in place of a SQL select. It is not T-SQL.
One cannot use PL/SQL to create functions along the style of T-SQL, where the function executes a SQL using some conditional logic, and then return as if the function was a native SQL select.
T-SQL is an extension to the SQL language - making it a hybrid and very impure language implementation. PL is based on ADA - part of the Pascal family of languages. The E-SQL (embedded SQL) approach used in languages like C/C++, Cobol and Ada, has been transparently done in PL/SQL. You can write and mix PL code and variables with SQL code. And the PL/SQL engine figures out how to make the call from the PL/SQL engine to the SQL engine.
But PL/SQL is not "part" of the SQL language and does not "extend" the SQL language in a T-SQL fashion.
So you need to check your SQL-Server preconcepts in at the door, as they are not only irrelevant in Oracle, they are WRONG in Oracle.
The correct way in Oracle, in a nutshell - Use the SQL language to do data processing. Use PL/SQL to manage conditional process flow and the handling of errors.

Will Adobe ever add support for JPEG-XR?

There's been quite a bit of work done on the Flash Player to display and export JPEG-XR files. During the Flash CS6 prerelease, the Flash team talked about additional JPEG-XR support for things like spritesheet creation.
I know there's an ancient Photoshop plug-in for JPEG-XR, but does Adobe have any plans to make JPEG-XR a first-class citizen in Photoshop? Considering the numerous benefits the format offers, I'm puzzled as to why this hasn't been added.
Either way, it would be helpful to get the scoop. If there are no plans to support it then I'll buy a product that does, but I'd prefer Photoshop.

I've been using XnConvert to convert uncompressed files to JPEG-XR. It's a free, cross-platform, batch file converter:
http://www.xnconvert.com/
XnConvert doesn't have as much control over compression settings as I would like, but the JPEG-XR files it creates are 30% – 50% smaller than comparable JPEG files saved using Photoshop's "Save for Web".

Teaming support for MSSQL

Similar Messages

Maybe you are looking for