Teamspeak3 in KDE - microphone problems [SOLVED]

I am in KDE4 (latest version as of now). I chose the GStreamer backend when I installed KDE.
I have a headset, plugged into the rear outlets on my pc.
Sound output works fine.
I installed Teamspeak3 (Linux version, not Wine, but same problem in Windows/Wine version).
I can hear sounds just fine, but it does not register any sound from my microphone.
I went into alsamixer, unmuted everything, turned it up, etc., same problem. There is a 'rear mic' and 'rear mic boost' in the output section of alsamixer. when I turn that up, I can hear the microphone just fine through the headphones, so I know the microphone works and is picking up sound - Teamspeak isn't registering it, though.
The input section of Teamspeak settings shows either default or ALSA for sound system, and whichever I choose, it has two devices under microphone. I've tried all different combinations, no dice.
Any ideas?
Last edited by olorin12 (2014-12-13 02:51:30)

Apparently I didn't do my due diligence.
Teamspeak3 requires Pulseaudio. I installed it, now everything is working fine, both native and Windows/Wine versions.
Leaving this up in case anyone else runs into the same problems.

Similar Messages

Amarok kde library problem [SOLVED]

After the last update I had problems running amarok on gnome. Trying to start from the terminal returned various lib errors (libkhtml.so.4 , libkdeui etc.) running "pacman -S kdelibs3" seems to solve the problem. Hope it helps if anyone out there having the same issue...

Had the same problem.
kdelibs3 was installed, but I had to reinstall it to fix the problem.

[solved] Microphone problem, possible unwanted stereo mix.

I'm user of integrated Integrated audio: Realtek HD Audio ALC 1200 (Mother board: ASUS P5Q)
Whenever i try to record something from my microphone input, i'll record everything that currently plays at the background (output is being captured with microphone input, no matter what).
The question is, how to disable this? If i lower capture volume, this stereo mixer volume goes down, too, but therefore it's impossible to record my own voice without yelling.
I'm using Pulse Audio.
Is there anyone who is using same audio card and not having same problems?
I just hope i shouldn't blame my integrated audio card, but my hands.
Here is a screenshot of my alsamixer settings: http://img217.imageshack.us/img217/5885 … shotgy.jpg
EDIT: If you have same audio card and you do (or do not) have any microphone problems, please contact me.
TL;DR: stereo mixer is always on.
Solution: if you have 6 pins on motherboard, try to use orange/black instead of green for audio out (headphones). No idea what's the problem with green one.
^ works for me.
Last edited by Tom Fyuri (2012-10-20 10:36:11)

pyther wrote:
You say you are using pulseaudio. If I am not mistaken, the settings you change in alsamixer won't affect pulesauido (at least not in my case)
Have you installed and run pavucontrol to look at the "Input" Settings? This is the mixer for PulseAudio
After little discussion at alsa-project.org I believe my audio card is just "not really good" and this stereo mixer is possible to hear, if output volume is 66+ and capture 33++, i just switched to values above. (it's almost silent with those)
So I can now use microphone without heavy stereo mixing. But, need to find anyone else with same audio card experiencing same problems. If someone has the same audio card, and is (isn't) experiencing same problems please contact me.
Used pavucontrol to confirm volume settings.

Acrobat printing problems (solved)

Hi Folk
I'm getting on well with Arch apart from one problem, I can not print from Acrobat reader, it accepts the command and does precisely nothing, the jobs are appearing in cups but not being printed, I can print from Open Office and test print from cups but no cooperation with acrobat, anyone have any ideas? thanks
Pete
Last edited by pete051 (2009-09-29 19:14:12)

I don't know what DE are you using. In my case, I use xfce and when acroread starts with his stupidity I just change the print command to 'xfprint'. That forces acroread to redirect the print job to xfce's printing frontend, and problem solved.
Now, if you're using kde, I guess there is something named 'kdeprint', 'kprint' or similar. For gnome, I've no idea.
I hope this helps.
p.s. Sometimes, cups takes his time to print. When its taking too long I purge cups' temp files and restart the daemon.
Last edited by kjon (2009-09-25 00:32:23)

Microphone problems with hp dm3 3110 us

hi, im new to this.
I am trying to record directly from the mixer and somethimes from my external microphone. however my hp pavillion dm3 3110 laptop is also picking up the internal microphone. I tried muting the internal microphone but then the extenal one becomes disabled.
I usually record lectures and it is important for me to have the internal microphone disabled or not interferring while i am actually trying to record straight of the mixer or with my external mic.
If you guys need more info pls let me know. I seriously need help with this as this was the main reason i bought this laptop.
Thanks

@kextech
Hi,
You notebook have webcam with integrated microphone. so you may try something like this:
Click Start, type Device Manager , and select Device Manager from the list provided.
Double-click Imaging Devices to expand the list of webcam drivers.
Click with right button of your mouse on webcam and choose Disable.
Check is this problem solved or not.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Linux 3.1.9 and HDA ATI SB problem [SOLVED]

I`ve just updated kernel from 3.1.8 to 3.1.9 and now my HDA ATI SB (ALC889 Analog) audio card is now unavailable for system. Any suggestions?
I have KDE, and phonon-gstreamer.
Last edited by RealGecko (2012-01-14 11:38:02)

Well problem solved. Of course it is strange, but.. Before update I installed fluidsynth and enabled to run it as daemon through rc.conf. Then was update and restart after that I had message that my sound card doesn`t work. I was thinking and decided to remove fluidsynth from daemons array. After restart everything works again. The strangest thing is that if I start fluidsynth daemon during system run(/etc/rc.d/fluidsynth start) everything works fine.

Pavilion G7 1365dx internal microphone problems (skype).

I just purchased this notebook and when I tried to use Skype, everything works except the other person can't hear me. Mic is enabled and not muted. Internal Mic (IDT High Definition Audio CODEC). System checked for updated drivers, system said drivers are up to date. Thank you in advance for your help.

Hello @Pistaba1975,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how the microphone on your notebook is enabled, but will not record any audio on Skype. I would be happy to assist you in this matter!
Are you able to record audio using a different program on your computer? Were you able to record audio from Skype in the past?
In the meantime, I recommend following the steps in this document on Resolving microphone problems (Windows 8). This should help enable the audio-in when using the microphone.
Additionally, I also suggest following this resource on Microphone Troubleshooter to ensure that your Skype software is communicating the audio being transmitted to your audio-in device.
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

I can not write in Hebrew And create effects It shows all distorted When This problem solved?

I can not write in Hebrew
And create effects
It shows all distorted
When This problem solved?

roeisarusi wrote:
When This problem solved?
Nobody knows. iWorks apps have always had bugs that make them unsuitable for Hebrew/Arabic for most people. Tell Apple here:
http://www.apple.com/feedback/keynote.html

How to problem solve adf issue in the mx340 model

how to problem solve adf issue in the mx340 model

Alex,
the missing thing in your example is the fact, that if only one value is selected, the parameter has exact this value like BOSTON. If you choose more than one value, the parameter includes the *'*, so that it looks like *'BOSTON','NEW YORK'*. So you need to check in the package, if there's a *,* in the parameter or not. If yes there's more than one value, if not it's only one value or it's null.
So change your package to (you need to expand your variables)
create or replace package bip_departments_2_parameters
as
p_dep_2_param varchar2(1000);
p_loc_1_param varchar2(1000);
p_where_clause varchar2(1000);
function beforereporttrigger
return boolean;
end bip_departments_2_parameters;
create or replace package body bip_departments_2_parameters
as
function beforereporttrigger
return boolean
is
l_return boolean := true;
begin
p_where_clause := ' ';
if p_dep_2_param is not null then
if instr(p_dep_2_param,',')>0 then
p_where_clause := 'WHERE DNAME in ('||p_dep_2_param||')';
else
p_where_clause := 'WHERE DNAME = '''||p_dep_2_param||'''';
end if;
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || ' AND LOC IN ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || ' AND LOC = '''||p_loc_1_param||'''';
end if;
end if;
else
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || 'WHERE LOC in ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || 'WHERE LOC = '''||p_loc_1_param||'''';
end if;
end if;
end if;
return (l_return);
end beforereporttrigger;
end bip_departments_2_parameters;
I've written a similar example at http://www.oracle.com/global/de/community/bip/tipps/Dynamische_Queries/index.html ... but it's in german.
Regards
Rainer

WiFi connection problem solved

My intel iMac and MBA had no problem but iPods 3g and 5g did. I had an old Netgear router connected and sitting next to my Airport Express. On a hunch I diconnected the Netgear and created a guest network to replace the one on the Netgear. PROBLEM SOLVED!
Evidently our iPods and boarder's iPhone had problems sorting out the signals and finding the right addresses. Moving the AE to a higher and slightly more central position also helped.
Jim

Same here on a Vodafone PocketWiFi 2.
Tried NetworkManager, wicd, wifi-menu but all have the same issue.
I recently installed Aptosid on another machine and it has the same problem... It also has kernel version 3.9.
All the live CDs I've tried work, even an Arch CD from May works, though a current install does not.
I have no problems connecting to another (wpa2 enterprise) network yet can't on this 3G modem.
I'm hoping this isn't a permanent issue and perhaps an update very soon will fix this.
It seems the only way to fix this for now is to use an old version of Linux. I'm currently running a virtual machine only for the purpose of Internet sharing, very annoying.

Bug fix for Mac book wireless - problem solved!

Aparantly there is a rather large number of folks out there who've discovered this dillema with wireless not working very well at this point on the Macbook.
Well, I can attest there is one very good solution out there for this issue. This application called Sonar Theater from www.sunray.tv includes a bug fix for the wireless connection issues with Macbook in their latest 1.5 release of Sonar Theater.
I downloaded it, put it into my start up folder and waalaa! problem solved. I've haven't any more issues with dropped wireless since - it's been running constantly for over 2 weeks now.
I haven't even attempted to touch my router configuration - don't need to.

Welcome to the better life of Macs. I am using Sonar Theater too and it's been working very well for me. In fact, I'm getting hooked on just texting a message to my Mac book to fire up user sessions now. I think if you give the Mac Book some time however, you'll find that there really is no comparison to PC's. Your life overall is going to just keep getting better as you dig in to the resources available to new Mac users.
I'm sure it seems confusing to PC users at first, but here's how to set up any application as part of your startup sequence. It really is extremely easy and simple compared to the PC world. Oh and by the way, in reality, Mac users refer to this as your login sequence. So, at login time, you can do a multitude of different things for each user account you might want to set up. Naturally, you can choose to share or not share applications and data between these user accounts on your Mac too....
Mac OS X 10.3 or later
1. Log in as the user who wishes to have a login item or as an admin user.
2. Choose System Preferences from the Apple menu.
3. Choose Accounts from the View menu.
4. Click the name of the user.
5. Click the Startup Items button
6. Click the "Add {+}" button.
The item you selected will automatically open the next time you log in.
there are several ways to get good info from the apple community on tips and tricks as well. you should just try the apple os x web site...here,
http://www.apple.com/macosx/resources/
happy mac-ing!

Mediawiki, mysql, php? problems [SOLVED]

On Sunday my Arch install that is hosted by Slicehost became unresponsive to them so they had to do an emergency reboot. After it came back up my install of mediawiki was (and still is) only returning a blank page (at least in Firefox). After some digging I found out that part of the problem was that mysqld wasn't starting so I managed to get that fixed by commenting out the lines relating to innodb and putting in skip-innodb into my.cnf. But I'm still getting a blank page.
According to Mediawiki's manual, "A blank white page indicates a PHP error which isn't being printed to the screen." They give two lines to put into LocalSettings.php to force error messages but after doing that I'm still getting a blank page. Changing display_errors in php.ini to ON didn't have any effect. When I load the wiki in Safari I get the following error: "Got java.io.EOFException (Server closed connection while sending the HTTP header.): http://some_url.com/mediawiki/index.php/Main_Page". I have no idea what this error means and googling java.io.EOFException doesn't bring up anything very helpful. My PHP Test Page indicates that PHP is up and running.
Any ideas on fixes or where I can find more clues?
[EDIT]
Mysql was definitely the root of the problems with Mediawiki. I tried nearly every suggestion listed in the forums for fixing a mysql install that wouldn't start but nothing worked. I even completely uninstalled mysql and reinstalled it but it still refused to start. I switched over to postgresql and switched mediawiki to run with that. Problem solved.
Last edited by k_odoma (2009-05-23 01:48:35)

There are some other things that must be done to connect to
the database
(such as passing the usernamee, password, and host info to
mysql_connect()
and storing the connection resource), and those might be in
the include
files. I generally place all of the connection parameters in
a separate file
that is located in a folder that can't be accessed by a
browser, for
security purposes.
Paul Swanson
Portland, Oregon, USA
"Amy Blankenship *AdobeCommunityExpert*"
<[email protected]>
wrote in message news:edk6ui$69c$[email protected]..
> What's in the include(s)?
>
> "83Dons" <[email protected]> wrote in
message
> news:edk5s5$4uk$[email protected]..
> > Here is the php code for the 'read' and 'write'
parts:
> >
> >
> >
> > <?php
> > include '......';
> > mysql_select_db('clinskills') or die("UNABLE TO
CONNECT TO
DATABASE");
> > $sql = "select A1Answer from authorware where id =
'13'";
> > $result = mysql_query($sql);
> > $answer1 = mysql_result($result,0,"A1Answer");
> > print $answer1;
> > ?>
> >
> > <?php
> > include '............';
> > mysql_select_db('clinskills') or die("UNABLE TO
CONNECT TO
DATABASE");
> > $newdata = $_GET['data'];
> > mysql_query("insert into authorware (A1Answer)
values('$newdata')")
or
> > die(mysql_error());
> > mysql_close(); ?>
> >
>
>

Microphone problem, N86

Hi!
I have experienced 5 times that the person im' calling on the other line can't hear what im saying..
Have the 21.006 FW.
Microphone problems?
Restarted the phone, and the problem is still there..
N8 FW: 022.014 -- Please separate Artist & Albums!
N86 8MP FW: 30.009 -- We need a new FW on this phone!
E51 FW: 410.34.001
E70 FW: 2.0618.07.10 -- Why no v3 for my code?

The voice recorder won't work either..
N8 FW: 022.014 -- Please separate Artist & Albums!
N86 8MP FW: 30.009 -- We need a new FW on this phone!
E51 FW: 410.34.001
E70 FW: 2.0618.07.10 -- Why no v3 for my code?

Stuck with grub problem (SOLVED)

Today i tried to upgrade my Arch Linux, it downloaded everything that should be downloaded, it was installing upgrades but at the installing grub it stucks as like this
"Copying /boot/grub/grub.cfg.pacsave to /boot/grub/grub.cfg"
I've waited it for about 15 minutes, it didn't move on. So i did ctrl+z to break. Then i tried to update again. But it gives an error which is:
error: failed to commit transaction (conflicting files)
python: /usr/bin/2to3 exists in filesystem
Error occured, no packages were upgraded.
Please help me guys!
Last edited by bilgee0629 (2011-03-21 10:36:28)

Problem solved by moving 2to3 to other directory.

Dr.Watson problems solved.

DR.WATSON PROBLEMS SOLVED:
System:
WLS 5.1 with SP11 running on NT4 Using OCI817_8.
Oracle 7.3.4 running on NT4.
Problems:
Dr.Watson exceptions in native code...
# An EXCEPTION_ACCESS_VIOLATION exception has been detected in native code outside
the VM.
# Program counter=0x60239689
When asking BEA and Oracle:
"Use the latest OCI available. It is backward compatible !"
What have been done to solve the problem:
Going through all SQL code (and doing some rewriting), configuring connection
pools (TestOnReserve / TestOnRelease, refresh, etc) and several other configurations...
At last, we tried to change to the OCI version matching the Oracla versions we
were connecting to (from OCI817_8 to OCI734_7).
Voila ! NO MORE DR.WATSON EXCEPTIONS !
Our conclusion:
If possible, use the OCI version that matches the Oracle version you are running
on.

Hi Abhijit
Couple of pointers which could resolve the issue:
1. Since you are using the JDBC-ODBC bridge what occurs internally is that your JDBC API through the Virtual Machine make calls into the ODBC API on your Windows system. So the Watson error that you are getting is probably an illegal access by one of the methods in the ODBC API - this is for the Diagnosis part.
2. The Solution part -
a. Should I change my JDBC-ODBC driver? Not necessarily because the problems could be with the ODBC interface implementation and changing the driver might not help.
b. Should I change my programming style? This is one thing which could really help. The problem with creating connections each time is that it takes a lot of resources to do it, So there is a performance degradation. What you could do inyour code is use a Java Bean to create the required Connection. You can also think of using a prepared statement appropriately encapsulate it since you are invoking a particular query repeatedly. In your JSP page you can retrive(create) this bean through the jsp:useBean tag with the session as the scope attribute. The <jsp:setProperty methods could also be used to set the DSN name and the driver.
Once this bean is successfully created you have an open connection.
Now for the part you have pasted - replace the create connections with getting a new Statement object which would hold your Query. At the end of the JSP just close the Statement object.
Once you are done updating the page you may transfer the control to a different JSP - Let that transfer trigger the connection close in the Java bean.
This should solve the Dr.Watson problem.
Good Luck!
Eshwar Rao
Developer Technical Support
Sun microsystems inc
http://www.sun.com/developers/support

Teamspeak3 in KDE - microphone problems [SOLVED]

Similar Messages

Maybe you are looking for