Teamviewer changing lists as navigate through pages-probl for anyone else?

Hi All,
We're using R/3 4.7, ESS 50.4 and MSS 6.1.20.  After much correspondence with SAP we have discovered that the teamviewer does not behave the way we thought/want it to.
Basically as the teamviewer is applied on a page basis, each page gets their own teamviewer.  In our teamviewer we have 3 distinct lists of employees.  So if on one page you were looking at list 2 and you navigate to a different page, we expected to be on the same list.  Unfortunately, if the teamviewer on the new page was previsouly looking at a different list, say list 3, the employees for list 3 would be displayed.
This is not what we want.  In essence we want the teamviewer to work off the MY Staff workset, so that when you navigate between pages, the teamviewer will remain on the same employee in the same list.  This to me is the most user friendly way and the way that makes the most sense. 
If a manager wanted to view data for a single employee from a number of pages, (s)he could quite possibly have to reset the teamviewer on each page and select the employee again.  This is totally unacceptable..
Has anyone else been bothered by this?  Did anyone come up with a solution?  I can't believe that this issue has not arisen before.  I would be interested to hear similar stories.
Many Thanks,
Liz.

After much correspondence with sap, this is infact the expected behaviour on the team viewer

Similar Messages

  • Impossible to navigate through pages

    Hello,
    With App Store (and the same with iTunes), I am not able anymore to navigate through pages (2, 3, 4, 5 - next) once browsing te applications into their categories.
    Sorry for my bad English.
    Thanks and regards
    Henri

    Well, folks, I've got good news and bad news. I can now navigate through all the pages from 1 to N and back again. However, if I happen to choose to see the specific information for an app, say on page 6 of 10, it also works fine, but when I want to return to page 6, hitting the back arrow in the top left of the app page returns me to page 1 NOT page 6. So, I have to navigate to the bottom of page 1 and choose the page I wanted to return to in the first place, page 6. Still a bug, APPLE.

  • Ipad2 doesn't sync with my kindle. When I open the kindle app I have to search for the correct page. Does anyone else have this problem?

    When I open the kindle app on iPad 2 I have to search for the correct page. Does anyone else have this problem?

    Well, I did a search on apple.com and found this:
    http://www.apple.com/itunes/itunes-news/2010/04/the-hidden-itunes-visualizer-con trols.html
    "The Visualizer -- graphics that swoop and pulse with the music -- has been part of iTunes' DNA from the beginning. And because its creators wanted to interact with the graphics in real time as well as watch them, Visualizer includes some single keystroke commands that change what you see while it runs. But these commands are hidden by default lest they obstruct the graphics.
    Use the Show/Hide Visualizer command in the View menu to turn Visualizer on and off, and use the Visualizer menu to select among the choices. If the choice you're using has hidden commands you can see them for a brief time by typing ? while a song is playing and Visualizer is visible. The keystrokes will work regardless of whether the help menu is showing, so if you memorize them it's possible to add Virtuoso Visualizer Player to your list of accomplishments. (For the Visualizer choice called Jelly, available only in iTunes for Mac, try holding the keys down, especially the number keys, for maximum effect.")
    Not that you care. >.<

  • HT1222 I just wish we had a "backwards" half circle to hit when we need to go back one page.  Does anyone else feel the same way?  How did I find this page anyway?

    I just wish we had a "backwards" half circle to hit when we need to go back one page.  Does anyone else feel the same way?  How did I find this page anyway?

    how about you just swipe from left to right.  works for me.

  • HT1338 I cannot open my existing Pages files any longer.  I get a message that my Pages needs to be updated.  But when I go to update Pages, I am told I have the latest Pages.  Is anyone else having this problem?

    I cannot open my existing Pages files any longer.  I get a message that my Pages needs to be updated.  But when I go to update Pages, I am told I have the latest Pages.  Is anyone else having this problem?

    Maybe this discussion will help you : https://discussions.apple.com/message/23723460#23723460

  • Keyboard response chang in iOS 8.0.2 for anyone else?

    Keyboard response chang in iOS 8.0.2 for anyone else?

    Other people have reported issues with the keyboard in iOS 8. I had some problems and I reset all settings and that fixed most of the issues - everywhere but in this forum. But the keyboard problems in this forum are a as a result of the crappy software that this forum runs on.
    First reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. See if that does any good.
    If that made no difference, try this. Reset all settings. You will not lose any data, but most of the device settings will have to be entered in the settings app again. Settings>General>Reset>Reset all Settings.

  • Problem with back button when using task flow to navigate through pages

    I am using unbounded task flow to navigate through my pages
    in page2 I added back button so I can back to page1 using the action A2
    task flow 1
    page 1 -----A1-------> page 2
    page2 ----A2--------> page1
    the problem when I used page2 in another task flow
    task flow 2
    page 3 -----A3------> page2
    page 2 -----A4 -----> page3
    here when I click on back button he take me to page1
    how can I back to page3 ???????

    For this you have to know where the user came from when he navigated to page2. You can e.g. store the back target in a variable in the session or pageflow scope (when the user navigates from page1 or page3 to page2), then you bind the back button of page 2 to the stored variable.
    Timo

  • A number of peoples names associated with an email address have been changed to "Apple Computer Inc." in Mail  Anyone else experiencing this?

    When I type in a letter in the "To" box, let's say 'a', a number of my contact come up with "Apple Computer Inc" as the name associated with an email address.  In the past, the person's name was listed i.e Joe Smith <[email protected]>.  Now it looks like this Apple Computer Inc.<[email protected]>  Anyone else experienceing this?

    Hello DSH3
    Check out your contacts to ensure they are correct. If they are then check out the article below to see if it pulling data from the Previous Recipients or Address History
    iCloud: Troubleshooting iCloud Reminders and Tasks
    http://support.apple.com/kb/TA22337
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • When I open new tabs, their names will get stuck at whatever name they are first given and will not change as I navigate within them. For example, a tab will stay named "New Tab" or "Connecting..." Any advice/solutions to fix this behavior?

    My problem is as the title suggests.
    When I open a new tab, the title displayed on the tab will stay stuck at whatever the tab is first titled after it is opened- usually "New Tab" or "Connecting..."
    The names will stay stuck at those names even if I navigate within the tabs to different pages or refresh the tabs/pages.

    I only had to disable TabRenaminizer, and everything is working just fine now. Thanks a bunch!

  • I have Friefox 17 and use Windows 7. I can't seem to click on all of the the links at the top of pages. Is anyone else having this issue? How to fix?

    I updated to FF 17 and use Windows 7 on a 2 yr old Sony Vaio Laptop. Since updating, I cannot seem to click on certain links, most of which seem to be located at the top of web pages. I also have trouble using click and hold to scroll feature (on the side). It's very finicky about where on the sliding button I can click on to make it work. I have no problem using the up and down arrow buttons on the side though.
    How to fix?

    Problems with buttons and links at the top of the page not working can be caused by an extension like the Yahoo! Toolbar or a Babylon extension that extents too much downwards and covers the top part of the browser window and thus makes links and buttons in that part of the screen not clickable.
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode

  • HT5312 I have tried to request the 'rescue' email for 2 separate Apple IDs.  The email does not send.  I no longer remember my Security questions, I need to reset them so that I can change my password on my account.  Has anyone else experienced these issu

    Please help....

    If you aren't receiving the emails on your rescue email accounts (and you've checked the spam folder as well as the inbox, and tried clicking the reset link again), then you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699

  • How can I hide what I write in a find and change list

    I've written a find and change script, I prepared to offer it for anyone to use, but I don't want to anyone to read what I write in the find and change list.
    How Can I hide it?

    OK, my be offer it for someone to use it, I mean in house coworker, no any virus in it.
    How can hide the find and change list, or change it to another format, not just .txt.
    mybe change it to .doc or .vb or .js, and the script still can run well.

  • CTS - Don't Always Want Transportable Change Lists

    Is there a way to turn off automatic creation of the Transportable Change Lists?  At times, especially during the trial and error of development in the IB-Repository, I do not like having a bunch of transportable change lists created.  I end up deleting them manually since I always do initial transports of the entire SWCV after I am done.
    In the past I have turned off the change lists by SWCV when using CMS for transports (config exists in Administration section of Integration Builder).  Is there something like this for CTS?

    This change did not resolve my issue (and we bounced the system to make sure it took effect).
    If anyone knows of anything else, please chime in.
    When I make a change in IB-Repository, then go to the "Change Lists" tab and activate the change, a "Transportable" change list automatically generates.  I would like that turned off and I will only make transports when I am ready.
    Thanks

  • How do you change the header on different pages?

    I'm having difficulties changing the header on another page. For example, my title has to be a certain header nad the other pages another header, but all them conform to the same header!

    It is called alignment.
    +Menu > Format > Align > Left / Right / Centre / Justify+
    Or use tabs to position the text where you want it, setting tabs by clicking on the ruler.
    The first click gets you the default left align tab, each subsequent click on the tab marker advances it to centre, right, decimal and back again to left. Or you can right click on the tab marker and get a pulldown menu with the same choices.
    Peter

  • Replacing master page layout for documents

    Hi all! I have been making a book, and have been using our standard master page layout. I now have to change the master page layout of the whole book, and I have made a document that uses the new master page layout. I did the typical make new master page layout, gave it a name, and everything seemed normal. I then went to add it to the existing documents but, my new layout is nowhere to be found. How do I add this new layout? I thought I could just change out the current master page layout for the new one. The only changes are the graphics at the top, and some header and footer changes. Body text stays the same. I'm on FM11 by the way.

    > I then went to add it to the existing documents ...
    How? Import Formats from the Book menu should do what you want, followed by an Apply Master Page operation (assuming the new pages have exactly the same names as the old pages to be replaced).

Maybe you are looking for