Teathering issue with samsung galaxy s2 GT i9000

Recently i bought my blackberry wifi only model. i tried teathering via hotspot and bluetooth via my samsung galaxy s2. Actually it gets connect but unable to browse any site or open any application.
My same samsung s2 can teather with other devices.i checked all settings and found ok.
is this known issue of teathering via s2 ?
when RIM will bring fix for this issue ?

Ok, I recieved link to bugzilla [http://bugzil.la/769269 http://bugzil.la/769269] from AaronMT

Similar Messages

  • Issues with Samsung Galaxy Tab S after installing 5.0.2

    Hi all,  After updating to the latest firmware I have had nothing but issues leading to the tablet now being useless. Power drains in seconds dropping from 53% to 2% in 3 minutes and loosing mobile connection every few minutes. The tablet turns itself off constantly and it is completely useless.  I have done the usual, deleted cche partitions's, soft reset, complete reset, deleted all data on SD card inserted and checked SIM in my phone to make sure it works. Anyone else had these issues or  other, this is redicoulus. After waiting months for the same update for my Galaxy Note 3 I am staring to have other issues with this also and this is very worrying.  many thanks  

    The update is FOTA. Your device will notify u when its your turn. They send them out in batches.
    Now you can take it to a best buy to the Samsung experience center and have them flash it. Also a Att device support center can do it.

  • Cannot send an MMS with Samsung Galaxy III

    Highly frustrating.
    I have turned on mobile data, turned on wi-fi, restarted it and it still doesn't want to send. The send circle just keeps going around and around, for hours! I have 2GB worth of data so it shouldn't be a problem. Can anyone tell me how to make it work because I really have no desire to drive up to Verizon, don't have the time. The phone is less than a week old. >.<

    No luck..>.<
    Perhaps I was doing it wrong. I took out the battery and held down the power button for 10 seconds. Then figuring I read it wrong, I took out the battery, let it sit for 30 seconds, put it back in and held the power button. Just powered on like usual. I really want to be able to send picture messages...>.<
    Date: Mon, 15 Oct 2012 23:18:46 -0600
    From: [email protected]
    To:  (removed personal email address as per Verizon Wireless Terms of Service)
    Subject: Re: Cannot send an MMS with Samsung Galaxy III - Re: Cannot send an MMS with Samsung Galaxy III
                                                                                    Re: Cannot send an MMS with Samsung Galaxy III
        created by B33 in Samsung Galaxy S III - View the full discussion
    Have you Pulled the Battery out and performed a Soft Rest?  by holding the power Button Down while the Battery is out..
    Reply to this message by replying to this email -or- go to the message on Verizon Wireless Community
    Start a new discussion in Samsung Galaxy S III by email or at Verizon Wireless Community
    (deleted personal/private information)
    Message was edited by: Verizon Moderator (M)

  • Is there a version of Firefox mobile compatible with Samsung galaxy precedent mobile phone?

    Looking for a version of Firefox mobile compatible with Samsung galaxy precedent

    What OS do you have?
    Unfortunately the Firefox App is not working properly with 2.1 systems. Here are the bugs to follow their statuses: https://bugzilla.mozilla.org/buglist.cgi?order=Importance;list_id=2400841;short_desc=2.1;query_format=advanced;short_desc_type=allwordssubstr;product=Fennec;product=Fennec%20Native

  • I can not use mac book air with samsung galaxy 3 to transfer files. i download the  OS X mountain line version the latest one...how can i introduce them each other?

    i can not use mac book air with samsung galaxy 3 to transfer files. i download the  OS X 10.8.1 mountain line version the latest one...how can i introduce them each other?

    Thanks how do I get the latest version then? online its asking me to submit address details and all sort and I'm not keen to do that, I'm working away from the city I bought it in and there is no Apple Store near me yet?

  • Ipad 2 wifi connection with Samsung Galaxy Y phone.

    Hi All,
    I have a Samsung Galaxy Y GT-S5360 model phone. I'm planning to have 3G internet through vodafone in my phone. Is it possible to connect internet from my samsung phone to ipad 2(without micro-sim) by enabiling hot spot feature in my samsung phone?
    Please suggest. If not possible, any work around would be of great help. Thanks
    Regards
    Jim

    Hi Gianluigi48,
    If you are having issues with a greyed out WiFi settings on your iPad, you may find the following article helpful:
    iOS: Wi-Fi settings grayed out or dim
    http://support.apple.com/kb/ts1559
    Regards,
    - Brenden

  • Issue with Samsung LN32B360

    I have seen an issue with the new 32" Samsung LN32B360 while looking at it in two different stores.This model is sold at BestBuy and Target.
    The issue that I have seen on both is with the picture settings.  There are three different modes for the picture, dynamic, standard, and movie.  If you change this setting to either standard or movie, then turn off the TV and turn it back on it will change back to dynamic by itself.  The menu isn't holding the setting.   
    Solved!
    Go to Solution.

    Here is what you need to do:
    Press the ◄ or ► button to select
    Store Demo or Home Use, then press the ENTERE
    button. The message
    Select the Antenna source to memorize.
    is displayed.
    We recommend setting the TV to
    Home Use
    mode for the best picture in your home
    Store Demo
    mode is only intended for use in retail environments.
    If the unit is accidentally set to
    Store Demo mode and you want to return to Home Use
    (Standard): Press the volume
    button on the TV. When the volume OSD is displayed, press and hold the
    MENU button on the TV for 5 seconds.
    environment.

  • Sony MDR-1RBT with Samsung Galaxy Tab 2?

    I've successfully paired my new Sony MDR-1RBT Bluetooth headphones with my Samsung Galaxy S3 phone.  However, I can't get them to pair with my Samsung Galaxy Tab 2 tablet.  Are they compatible?
    I held the button for 7 seconds until I heard the sound and the red/blue lights flashed.  The Galaxy Tab was discoverable but never found the headphones.  I tried restarting the tablet, restarting the headphones, etc.
    Any suggestions would be appreciated - these headphones were too expensive to not work with all my devices. 
    Solved!
    Go to Solution.

    I figured this out today - I realized I had to hold the power button long enough to see a red flash and then keep holding until I hear a second tone and a red/blue flashing.  The unit paired right away when I did this.  Thanks!

  • Help with error msg to send data with samsung galaxy tab app

    To whom it may concern,
    I downloaded this app and keep getting an error message. I always send the report. I have a Samsung galaxy tab. I have tried restarting my tab as well as uninstalling the app to reinstall it but I am still getting the error msg to send report. Please assist me in fixing this issue. Thank you for your time anbd patience.
    Kind Regards,
    April Joi Jones

    Hi April Joi,
    Could you please specify more on this issue. Which app are you exactly talking about?
    Are you using Adobe Reader on your Galaxy tab? Have you signed in to your "acrobat.com" account using Adobe credentials.
    What exactly were you trying to do?
    Please attach the screenshot of the error message(using camera icon) so that I can analyze the issue at my end.
    Hope to hear from you.
    Regards,
    Anubha

  • Sony X85C - Bravia Sync Issue with Samsung Homecinema and WD Live Box

     Hello  I purchased the 2015 4k Sony TV X85c line, its the 55" with Model Nr: KD55X8507C (silver bezel). The latest Android TV version from mid July is installed and the TV is working fine - except for the interaction with my 2 other components:- a Western Digital Live streaming player box- a Samsung Homecinema HT-D6750W  I knew i could run into problems when mixing up brands, but the issue now is really bugging me: The Samsung homecinema is connected via the HDMI 4 ARC to the Sony TV. The Westen Digital is connected to the homecinema. All devices are HDMI CEC compatible, thus on the Sony I can see the other devices and even control them with the Sony remote - which "concept wise" is really neat, but something is failing.  It seems that the Sony trys constantly to switch between audio system (Samsung) and its own TV speakers when choosing how to deliver the sound. This somehow interfers with the menu dialogs of the Sony. As soon as I connect the Samsung Homecinema and go into the display menu to change image settings / modes it the menu will crash after some seconds (it just fades away). This does not happen when the homecinema is not connected, but then of course im missing the sound of my homecinema.  So there seems to be a certain interference and I assume it could be because of the constant audio switching between TV and audio system. I already tried to deactivate all HDMI-CEC features on the devices, but for the Sony TV's bravia sync its impossible to deactivate fully (the menu is just greyed and "on").  I'm getting some new and state of the art HDMI cables later this day, maybe this will bring a positive effect. Anyone experiences something similiar with the X85C range of products? Is there a way to handle it? ThanksAndre / xenom0rph  

    I "solved" the problem: Bravia Sync does not seem to be compatible with HDMI CEC / Anynet of the Samsung homecinema. I deactivated all HDMI CEC features on the samsung player and the WD TV Live box, and then the deactivation of bravia sync was possible on the TV. After that the issue with the menu crashes was gone. Now i try to get digital audio with optical to the samsung player. So i connected optical out from the Sony TV to the optical in of the player. There are different settings to be made in the sonys audio menu now which I'm still not sure what to do. It has different compression modes for the audio (auto 1, auto 2, pcm). PCM seems to work for most digital audio content, but i fear DTS is not supported by the Sony. I tried the XBMC Kodi Android App on the Sony TV and got digital audio on some movies, but not all of em....not sure if its an app or TV problem.  Oh well..for the moment i stay with the WD live streaming box which supports all audio formats and is connected via HDMI to the player, but its just a very slow cpu in there, so it would be cool to use the more powerful TV as streaming player.

  • HS-700 Headset compatibil​ity with Samsung Galaxy S5?

    I have an HS-700 bluetooth headset I got when I had my Blackberry Torch (which I loved by the way)  I upgraded to a Samsung Galaxy S5 and paired them yesterday.
    All voice commands work great EXCEPT "Call".  When I push the voice command button and wait for the prompt then say "Call...and the number"  or "Call and the name"  it always calls the same number.  It says in the directions to push and hold the voice command button for 2 seconds then pause and say "Call and the number or name" .  When I do that it doesn't do anything......
    Am I doing something wrong or is it just not compatible with my Samsung?
    I have looked all over the internet for an answer or some help and have found none....can someone please help?  I love my headset!
    Thanks so much!

    that and the answer command is only when paired to a BlackBerry
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • Issues with Samsung 840 pro and MacbookPro mid 2012.

    I got a Samsung 840 pro 256GB SSD a few months ago. I installed it into my MacbookPro mid 2012 and it worked with no issues for two months. One day the drive pretty much crashed on me while I was using it. I tried connected the drive with a SATA to Thunderbolt adapter and the SSD worked with no issues. This led me to think the issue was with my mac, so I reinstalled the HDD I was previously using. I experianced no issues with this drive installed. Simply put, the SSD does not work if ONLY if it is connected to the internal SATA connection. I wound up RMAing the drive back to Samsung and recieved a new one today.
    I installed the drive and attempted to install OS X without success. After more troubleshooting I determined that, the brand new drive is experiancing the same issue: it does not work ONLY if it is conneced to the internal SATA connection. I spend an hour on the phone with Samsung, they have not heard of this problem happening. I called an independanta Mac repair shop and they told me it was the SATA cable (this is incorrect because other HDD's work). I went to the Apple store but they don't care about you unless you're willing to shell out big bucks or you have AppleCare.
    Somebody help!

    One possibility is that the model you have is intended for use with a SATA III 6.0 Gb/s interface whereas your computer only supports up to 3.0 Gb/s. If the new SSD is not downward compatible then it will not work properly.

  • NAC problem with Samsung Galaxy Grand (Android)...!!!

    I tried accessing wifi though my Android mobile in my college, which is NAC installed. The mac address of my device was successfully added to the portal, but I'm not able to connect my device to the respective wifi network.
    Can anyone suggest what's the problem.

    It is probably issue with your NAC config.
    If issue with all android devicea then look into this:
    https://supportforums.cisco.com/message/3889346#3889346
    HTH
    Amjad
    Rating useful replies is more useful than saying "Thank you"

  • Is Photoshop Touch compatible with Samsung Galaxy Note?

    This is THE app I've been waiting for!
    And first on Android - very chuffed, because I got my 1st Android phone days ago - the Galaxy Samsung Note - the size of which makes it super ideal for this kind of app!
    However, it says on Android Market that Adobe Photoshop Touch is not compatible with this phone.
    Can someone please confirm this? Or can Adobe let us know when it will be compatible?
    Thanks !

    Hi David,
    I just checked it out: Photoshop Touch is still unavailable on GooglePlay-Store; it still tells me that my Galaxy Note GT-N7000 is not compatible.
    But:
    Amazon App Store allows to download Photoshop Touch on Galaxy Note GT-N7000 yet !!! I bought PS Touch in this moment    I AM SOOOOOO HAPPYY !!!!
    Definitely creating a 1920x1080 px layer and brushing on it, is not that fast as it is on my Mac ... but that was not the point It really works fine, althought the display is a little bit small for that stuff
    Biggest thanks for the Galaxy Note support   and hate on GooglePlay
    If anyone from Germany has problems putting Amazon App Store to German, contact me. I was fighting against some issues for more than 1 and a half hour Oo
    So good night everbody and tomorrow will be a wonderful photoshopping day
    PS: Just found some issues ... for example the preferences. If you clikc on preferences, there are some values to change (for example under "stylus"), but there is no text, what this value changes

  • HDMI Audio issue with Samsung Plasma

    Hi all,
    I have a mid 2010 Mac Mini that I bought for my HTPC. I am unable to get the HDMI audio to work after trying a number of connection possibilities. Here's the setup -
    Mac Mini to Samsung via HDMI cable (1.3a) in either HDMI port - no audio
    Mac Mini to Samsung via HDMI cable currently working for my uverse service - no audio
    Mac Mini to Insignia LCD via HDMI cable in either HDMI port- no audio
    I thought it was hardware, so I made a genius appointment and took it in. They gave me a new mini. Same exact issue.
    When I switch to SAMSUNG in the sound properties, it tells me "The selected device has no output controls"
    Video works fine.
    What am I doing wrong? Did I just get two bad boards? This is really freaking annoying.

    I have the same issue... perfect image on a Samsung TV UE32EH5300, but no sound. I tried changing the input name to HDMI/PC (and tried all others) with no success.
    Altough I noticed one rare thing. I opened Mountain Lion AudioMidi Configuration and selected the HDMI output. Can't move the volume controls because these are supposed to be controlled on the TV. But when clicking at the Speaker configuration and making a test for L/R speakers... each TV  speaker (connected by HDMI) reproduced statics.
    THEN I'M CONFUSED!!!!... how can I hear sound produced by the computer but can't have the normal audio on HDMI???
    Any help???

Maybe you are looking for