Tech Preview available on Labs
We are pleased to announce that a Tech Preview of the Flash Builder Plugin for SAP Netweaver Gateway Services is now available on Adobe Labs. Please check it out and give us feedback!
http://labs.adobe.com/technologies/flashbuilder_sap/
how much memory and swap space do you have on the system ?
did you try stopping the admin server and then starting this instance ?
Similar Messages
-
Windows 10 Tech Preview Will Not Run On Oracle VM - Newest Build 2015
Hello Everyone,
I've been quite pumped to install the new Tech Preview for W10 on my VB.
I DL'ed the new ISO and tried to boot it up but it game me this error:
Failed to open the optical disk file.
Could not get the storage format of the medium (VERR_NOT_SUPPORTED).
Result Code:
VBOX_E_IPRT_ERROR (0x80BB0005)
Component:
Medium
Interface:
IMedium {05f2bbb6-a3a6-4fb9-9b49-6d0dda7142ac}
Callee:
IVirtualBox {fafa4e17-1ee2-4905-a10e-fe7c18bf5554}
Callee RC:
VBOX_E_OBJECT_NOT_FOUND (0x80BB0001)
The version I'm trying to run the machine off on is Windows 8.1 x64 / Other Windows x64.
I gave it 4096MB of RAM, with 256MB of VRAM allocated to it. 3D Acceleration is also enabled. I'm not too sure if this is an Oracle VM problem, or an ISO problem. Any suggestions?
Thanks,
ScythianUnborneI am trying to install Windows 10 in Virtual Box on my HP Pavilion DV6 running Windows 7 Home Premium x64. I set up the Win10 virtual machine following these instructions: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/how-to-install-windows-10-developers-preview-in/e98dd450-02d2-4519-b6a3-6743bedcf777
However, I am receiving the following error: 'VT-x/AMD-V hardware acceleration is not available on your system. Certain guests (e.g. OS/2 and QNX) require this feature and will fail to boot without it.' When I click continue, the VM provides the following
message: 'Your PC needs to restart. Please hold down the power button. Error Code: 0x0000000A Parameters: 0xFFD00000 0x000000FF 0x0000000A 0x8192F5E3'
After some further research, I found that I need to enable virtualization and hyperthreading. I downloaded Speccy and determined that my PC is capable of virtualization, and it was already enabled; however, hyperthreading is not supported. I have been hearing
good things about Windows 10, and I should really like to give it a test run. Is the error with Virtual Box or Windows 10 or Windows 10 running in Virtual Box? Is there anything I can do to make it work? Thanks for any help.
Any reason why you would not consider dual boot Win 7 and Win 10 TP ?
I had an Acer Aspire laptop running Win 7 Home Premium SP1 64-bit. I dual booted with Win 10 TP. That's starting from build 9841 to 9926. I dual booted twice and I had no problem doing it. -
Reminder: Please use GroupSpace for Tech Preview feedback
We recently announced the availability of the live WebLogic Portal GroupSpace community for Tech Preview 2. GroupSpace is one of the highlights of the 9.x release, and you can now use it to log and discuss Tech Preview-related issues, store documents, create links, and collaborate in other ways.
Please use GroupSpace instead of this newsgroup for logging and discussing Tech Preview issues. However, if for some reason GroupSpace is not available, feel free to temporarily use this newsgroup.
To use GroupSpace:
1. Send a note to [email protected], putting this in the subject line:
REQUEST FOR GROUPSPACE ACCOUNT.
You will be sent an invitation with instructions to join.
2. Before contributing as a GroupSpace member, please review the guidelines at: http://wlp.bea.com/WLP92TechPreview/docs/wlp_tp_groupspace_guidelines.doc
3. Log in to GroupSpace and start collaborating!
Thanks again for your participation. As always, if you have any questions, send a note to [email protected]
Thank you,
The WLP Tech Preview TeamHi
I found this answer..
was having trouble getting DirectAccess to enable on Windows 10 preview. The Enterprise version was being used and the issues with the machine name and GPO covered in other threads was also resolved. Instead it turned out that if the DA configuration
has the "Laptop only" restriction used as part of the wizard, the default value will not work with Windows 10. Instead, you have to use GP Editor and edit the WMI for "Laptop only" as follows:
Select * from Win32_OperatingSystem WHERE (ProductType = 3) OR ((Version
LIKE '6.2%' OR Version LIKE '6.3%' OR VERSION LIKE '6.4%') AND
(OperatingSystemSKU = 4 OR OperatingSystemSKU = 27 OR OperatingSystemSKU = 72 OR OperatingSystemSKU = 84)) OR (Version LIKE '6.1%' AND (OperatingSystemSKU = 4 OR OperatingSystemSKU = 27 OR OperatingSystemSKU = 70 OR OperatingSystemSKU = 1 OR OperatingSystemSKU
= 28 OR OperatingSystemSKU = 71))
(the new text is the OR VERSION LIKE '6.4%') After the necessary GPO update propagation delays, DA properly runs on Win 10. Just thought I would post this for others knowledge. -
How can we enable the tech preview for BPEL 2.0?
According to this blog, BPEL 2.0 support was supposed to be available in 11.1.1.3 in preview mode:
http://blogs.oracle.com/soabpm/2010/03/11gr1_patchset_2_111130_soa_fe.html
Any hints?Sorry, I did not understand your case correctly.
Then maybe you're talking about the "for-each" BPEL 2.0 activity which enable you to make that kind of loop.
The overall logic is the same.
You set the start counter to 1
You set the end counter to "count('your collection')"
And you name the counter in order to get the current element of the loop using the counter.
But be careful, if you set the start counter to 1 and your collection is empty then your loop will not end correctly.
mathieu.d wrote:
<forEach parallel="yes" counterName="index" name="ForEach_FilteredSubs">
<bpelx:skipCondition>ora:countNodes('SubscriptionsList','FilteredSubscriptions') = 0</bpelx:skipCondition>
<startCounterValue>1</startCounterValue>
<finalCounterValue>ora:countNodes('SubscriptionsList','FilteredSubscriptions')</finalCounterValue>
</forEach>regards,
mathieu
Edited by: mathieu.d on Feb 14, 2013 1:19 AM -
I installed the new tech preview of windows on 2 different laptops.
1 has an NVidia video card and the other has an ATI card.
I installed 12.1.1.4 on both. on the NVidia machine there is no problem.
On the ATI system it worked until the video driver updated.
Hasn't worked since. Has anyone ever had a similar experience and found a workaround without rolling back the driver???
Can any one help???
Thanks in advance.Hi Mike,
So the current situation is we are running Windows 10 9841 on the machine which used to run Windows XP, and the install process is very slow?
Have you checked the system requirements before the installation?
Before you install Windows Technical Preview
Could you please have a share with the machine specifications?
Besides, if you are willing to upgrade to the newer version (Build 9879, also Windows 10 9879 ISO is available for download), you might encounter the disk missing error. Build 9879 introduced functionality that used the
PUIS (Power-Up in Standby) function of hard disks. This causes the hard disk to not spin up when power is applied, it instead waits for a separate spin-up command.
Some system firmware does not send this command and thus the hard disks are either not seen in BIOS or appear incorrectly. This has been fixed by update
KB3021937.
For more details, please check this thread:
build 9879 bricking drives!!!!
Best regards
Michael Shao
TechNet Community Support -
Cannot install EMET Notifier 4.1 or 5.0 Tech Preview
I uninstalled EMET notifier 3 to try out the new 5.0 tech preview. However when trying to install I get an error saying "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your
support personnel or package vendor."
I tried installing 4.1 and get the same error. I am running Windows 8.1 Home Premium and have .Net 4 installed. I have turned on verbose logging, apologies for the massive amount of data but I didn't want anything to get missed.
The log file is below. Can anyone suggest what might be going wrong?
\Edit - The log below is pretty heavy reading, but the line that seems to be causing the trouble is:
CustomAction DIRCA_CheckFX returned actual error code 1157 (note this may not be 100% accurate if translation happened inside sandbox)
Solution
The solution is to go into c:\users\"username"\AppData\Local\ then right click on "temp" and choose "properies". Choose "security" --> edit --> add, and add the username you are using, and give yourself all rights.
I got this information from http://sourceforge.net/p/googlesyncmod/support-requests/225/?page=0
Many thanks,
Ian
=== Verbose logging started: 30/04/2014 11:25:31 Build type: SHIP UNICODE 5.00.9600.00 Calling process: C:\WINDOWS\System32\msiexec.exe ===
MSI (c) (C4:6C) [11:25:31:363]: Font created. Charset: Req=0, Ret=0, Font: Req=MS Shell Dlg, Ret=MS Shell Dlg
MSI (c) (C4:6C) [11:25:31:364]: Font created. Charset: Req=0, Ret=0, Font: Req=MS Shell Dlg, Ret=MS Shell Dlg
MSI (c) (C4:04) [11:25:31:373]: Resetting cached policy values
MSI (c) (C4:04) [11:25:31:373]: Machine policy value 'Debug' is 0
MSI (c) (C4:04) [11:25:31:373]: ******* RunEngine:
******* Product: C:\Users\Ian\Downloads\EMET Setup.msi
******* Action:
******* CommandLine: **********
MSI (c) (C4:04) [11:25:31:374]: Machine policy value 'DisableUserInstalls' is 0
MSI (c) (C4:04) [11:25:31:381]: SOFTWARE RESTRICTION POLICY: Verifying package --> 'C:\Users\Ian\Downloads\EMET Setup.msi' against software restriction policy
MSI (c) (C4:04) [11:25:31:381]: SOFTWARE RESTRICTION POLICY: C:\Users\Ian\Downloads\EMET Setup.msi has a digital signature
MSI (c) (C4:04) [11:25:31:427]: SOFTWARE RESTRICTION POLICY: C:\Users\Ian\Downloads\EMET Setup.msi is permitted to run at the 'unrestricted' authorization level.
MSI (c) (C4:04) [11:25:31:431]: Cloaking enabled.
MSI (c) (C4:04) [11:25:31:431]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (C4:04) [11:25:31:433]: End dialog not enabled
MSI (c) (C4:04) [11:25:31:433]: Original package ==> C:\Users\Ian\Downloads\EMET Setup.msi
MSI (c) (C4:04) [11:25:31:433]: Package we're running from ==> C:\Users\Ian\Downloads\EMET Setup.msi
MSI (c) (C4:04) [11:25:31:435]: APPCOMPAT: Compatibility mode property overrides found.
MSI (c) (C4:04) [11:25:31:435]: APPCOMPAT: looking for appcompat database entry with ProductCode '{65BC2BDA-D828-4596-99E4-A8799C45C84C}'.
MSI (c) (C4:04) [11:25:31:435]: APPCOMPAT: no matching ProductCode found in database.
MSI (c) (C4:04) [11:25:31:440]: MSCOREE not loaded loading copy from system32
MSI (c) (C4:04) [11:25:31:443]: Machine policy value 'TransformsSecure' is 0
MSI (c) (C4:04) [11:25:31:443]: User policy value 'TransformsAtSource' is 0
MSI (c) (C4:04) [11:25:31:443]: Note: 1: 2262 2: MsiFileHash 3: -2147287038
MSI (c) (C4:04) [11:25:31:443]: Machine policy value 'DisablePatch' is 0
MSI (c) (C4:04) [11:25:31:443]: Machine policy value 'AllowLockdownPatch' is 0
MSI (c) (C4:04) [11:25:31:443]: Machine policy value 'DisableMsi' is 0
MSI (c) (C4:04) [11:25:31:443]: Machine policy value 'AlwaysInstallElevated' is 0
MSI (c) (C4:04) [11:25:31:443]: User policy value 'AlwaysInstallElevated' is 0
MSI (c) (C4:04) [11:25:31:443]: Running product '{65BC2BDA-D828-4596-99E4-A8799C45C84C}' with user privileges: It's not assigned.
MSI (c) (C4:04) [11:25:31:443]: Machine policy value 'DisableLUAPatching' is 0
MSI (c) (C4:04) [11:25:31:443]: Machine policy value 'DisableFlyWeightPatching' is 0
MSI (c) (C4:04) [11:25:31:443]: Enabling baseline caching for this transaction since all active patches are MSI 3.0 style MSPs or at least one MSI 3.0 minor update patch is active
MSI (c) (C4:04) [11:25:31:444]: APPCOMPAT: looking for appcompat database entry with ProductCode '{65BC2BDA-D828-4596-99E4-A8799C45C84C}'.
MSI (c) (C4:04) [11:25:31:444]: APPCOMPAT: no matching ProductCode found in database.
MSI (c) (C4:04) [11:25:31:444]: Transforms are not secure.
MSI (c) (C4:04) [11:25:31:444]: PROPERTY CHANGE: Adding MsiLogFileLocation property. Its value is 'C:\Users\Ian\AppData\Local\Temp\MSIc9f55.LOG'.
MSI (c) (C4:04) [11:25:31:444]: Command Line: CURRENTDIRECTORY=C:\Users\Ian\Downloads CLIENTUILEVEL=0 CLIENTPROCESSID=4548
MSI (c) (C4:04) [11:25:31:444]: PROPERTY CHANGE: Adding PackageCode property. Its value is '{69FDEBF8-3A1D-4011-AAB7-980DF90F569B}'.
MSI (c) (C4:04) [11:25:31:444]: Product Code passed to Engine.Initialize: ''
MSI (c) (C4:04) [11:25:31:444]: Product Code from property table before transforms: '{65BC2BDA-D828-4596-99E4-A8799C45C84C}'
MSI (c) (C4:04) [11:25:31:444]: Product Code from property table after transforms: '{65BC2BDA-D828-4596-99E4-A8799C45C84C}'
MSI (c) (C4:04) [11:25:31:444]: Product not registered: beginning first-time install
MSI (c) (C4:04) [11:25:31:444]: PROPERTY CHANGE: Modifying ALLUSERS property. Its current value is '2'. Its new value: '1'.
MSI (c) (C4:04) [11:25:31:444]: PROPERTY CHANGE: Adding ProductState property. Its value is '-1'.
MSI (c) (C4:04) [11:25:31:444]: Entering CMsiConfigurationManager::SetLastUsedSource.
MSI (c) (C4:04) [11:25:31:444]: User policy value 'SearchOrder' is 'nmu'
MSI (c) (C4:04) [11:25:31:444]: Adding new sources is allowed.
MSI (c) (C4:04) [11:25:31:444]: PROPERTY CHANGE: Adding PackagecodeChanging property. Its value is '1'.
MSI (c) (C4:04) [11:25:31:444]: Package name extracted from package path: 'EMET Setup.msi'
MSI (c) (C4:04) [11:25:31:444]: Package to be registered: 'EMET Setup.msi'
MSI (c) (C4:04) [11:25:31:444]: Note: 1: 2262 2: Error 3: -2147287038
MSI (c) (C4:04) [11:25:31:445]: Note: 1: 2262 2: AdminProperties 3: -2147287038
MSI (c) (C4:04) [11:25:31:445]: Machine policy value 'AlwaysInstallElevated' is 0
MSI (c) (C4:04) [11:25:31:445]: User policy value 'AlwaysInstallElevated' is 0
MSI (c) (C4:04) [11:25:31:445]: Running product '{65BC2BDA-D828-4596-99E4-A8799C45C84C}' with user privileges: It's not assigned.
MSI (c) (C4:04) [11:25:31:445]: PROPERTY CHANGE: Adding CURRENTDIRECTORY property. Its value is 'C:\Users\Ian\Downloads'.
MSI (c) (C4:04) [11:25:31:445]: PROPERTY CHANGE: Adding CLIENTUILEVEL property. Its value is '0'.
MSI (c) (C4:04) [11:25:31:445]: PROPERTY CHANGE: Adding CLIENTPROCESSID property. Its value is '4548'.
MSI (c) (C4:04) [11:25:31:445]: TRANSFORMS property is now:
MSI (c) (C4:04) [11:25:31:445]: PROPERTY CHANGE: Adding VersionDatabase property. Its value is '200'.
MSI (c) (C4:04) [11:25:31:445]: SHELL32::SHGetFolderPath returned: C:\Users\Ian\AppData\Roaming
MSI (c) (C4:04) [11:25:31:446]: SHELL32::SHGetFolderPath returned: C:\Users\Ian\Favorites
MSI (c) (C4:04) [11:25:31:446]: SHELL32::SHGetFolderPath returned: C:\Users\Ian\AppData\Roaming\Microsoft\Windows\Network Shortcuts
MSI (c) (C4:04) [11:25:31:446]: SHELL32::SHGetFolderPath returned: C:\Users\Ian\Documents
MSI (c) (C4:04) [11:25:31:446]: SHELL32::SHGetFolderPath returned: C:\Users\Ian\AppData\Roaming\Microsoft\Windows\Printer Shortcuts
MSI (c) (C4:04) [11:25:31:446]: SHELL32::SHGetFolderPath returned: C:\Users\Ian\AppData\Roaming\Microsoft\Windows\Recent
MSI (c) (C4:04) [11:25:31:446]: SHELL32::SHGetFolderPath returned: C:\Users\Ian\AppData\Roaming\Microsoft\Windows\SendTo
MSI (c) (C4:04) [11:25:31:446]: SHELL32::SHGetFolderPath returned: C:\Users\Ian\AppData\Roaming\Microsoft\Windows\Templates
MSI (c) (C4:04) [11:25:31:447]: SHELL32::SHGetFolderPath returned: C:\ProgramData
MSI (c) (C4:04) [11:25:31:447]: SHELL32::SHGetFolderPath returned: C:\Users\Ian\AppData\Local
MSI (c) (C4:04) [11:25:31:447]: SHELL32::SHGetFolderPath returned: C:\Users\Ian\Pictures
MSI (c) (C4:04) [11:25:31:447]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (c) (C4:04) [11:25:31:447]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
MSI (c) (C4:04) [11:25:31:447]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs
MSI (c) (C4:04) [11:25:31:447]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
MSI (c) (C4:04) [11:25:31:448]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
MSI (c) (C4:04) [11:25:31:448]: SHELL32::SHGetFolderPath returned: C:\Users\Ian\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (c) (C4:04) [11:25:31:448]: SHELL32::SHGetFolderPath returned: C:\Users\Ian\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
MSI (c) (C4:04) [11:25:31:448]: SHELL32::SHGetFolderPath returned: C:\Users\Ian\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
MSI (c) (C4:04) [11:25:31:448]: SHELL32::SHGetFolderPath returned: C:\Users\Ian\AppData\Roaming\Microsoft\Windows\Start Menu
MSI (c) (C4:04) [11:25:31:448]: SHELL32::SHGetFolderPath returned: C:\Users\Ian\Desktop
MSI (c) (C4:04) [11:25:31:449]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Templates
MSI (c) (C4:04) [11:25:31:449]: SHELL32::SHGetFolderPath returned: C:\WINDOWS\Fonts
MSI (c) (C4:04) [11:25:31:450]: Note: 1: 2898 2: MS Sans Serif 3: MS Sans Serif 4: 0 5: 16
MSI (c) (C4:04) [11:25:31:455]: MSI_LUA: Setting AdminUser property to 1 because this is the client or the user has already permitted elevation
MSI (c) (C4:04) [11:25:31:455]: PROPERTY CHANGE: Adding AdminUser property. Its value is '1'.
MSI (c) (C4:04) [11:25:31:455]: PROPERTY CHANGE: Adding Privileged property. Its value is '1'.
MSI (c) (C4:04) [11:25:31:455]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (c) (C4:04) [11:25:31:455]: PROPERTY CHANGE: Adding USERNAME property. Its value is 'Ian'.
MSI (c) (C4:04) [11:25:31:455]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (c) (C4:04) [11:25:31:455]: PROPERTY CHANGE: Adding DATABASE property. Its value is 'C:\Users\Ian\Downloads\EMET Setup.msi'.
MSI (c) (C4:04) [11:25:31:455]: PROPERTY CHANGE: Adding OriginalDatabase property. Its value is 'C:\Users\Ian\Downloads\EMET Setup.msi'.
MSI (c) (C4:04) [11:25:31:455]: Machine policy value 'MsiDisableEmbeddedUI' is 0
MSI (c) (C4:04) [11:25:31:455]: PROPERTY CHANGE: Adding SourceDir property. Its value is 'C:\Users\Ian\Downloads\'.
MSI (c) (C4:04) [11:25:31:455]: PROPERTY CHANGE: Adding SOURCEDIR property. Its value is 'C:\Users\Ian\Downloads\'.
MSI (c) (C4:6C) [11:25:31:456]: PROPERTY CHANGE: Adding VersionHandler property. Its value is '5.00'.
=== Logging started: 30/04/2014 11:25:31 ===
MSI (c) (C4:04) [11:25:31:459]: Note: 1: 2262 2: PatchPackage 3: -2147287038
MSI (c) (C4:04) [11:25:31:459]: Machine policy value 'DisableRollback' is 0
MSI (c) (C4:04) [11:25:31:459]: User policy value 'DisableRollback' is 0
MSI (c) (C4:04) [11:25:31:459]: PROPERTY CHANGE: Adding UILevel property. Its value is '5'.
MSI (c) (C4:04) [11:25:31:459]: Note: 1: 2262 2: Font 3: -2147287038
MSI (c) (C4:04) [11:25:31:460]: Note: 1: 2203 2: C:\WINDOWS\Installer\inprogressinstallinfo.ipi 3: -2147287038
MSI (c) (C4:04) [11:25:31:460]: Note: 1: 2262 2: LaunchCondition 3: -2147287038
MSI (c) (C4:04) [11:25:31:460]: APPCOMPAT: [DetectVersionLaunchCondition] Launch condition already passes.
MSI (c) (C4:04) [11:25:31:461]: PROPERTY CHANGE: Adding ACTION property. Its value is 'INSTALL'.
MSI (c) (C4:04) [11:25:31:461]: Doing action: INSTALL
MSI (c) (C4:04) [11:25:31:461]: Note: 1: 2262 2: ActionText 3: -2147287038
Action 11:25:31: INSTALL.
Action start 11:25:31: INSTALL.
MSI (c) (C4:04) [11:25:31:461]: UI Sequence table 'InstallUISequence' is present and populated.
MSI (c) (C4:04) [11:25:31:461]: Running UISequence
MSI (c) (C4:04) [11:25:31:461]: PROPERTY CHANGE: Adding EXECUTEACTION property. Its value is 'INSTALL'.
MSI (c) (C4:04) [11:25:31:461]: Doing action: DIRCA_CheckFX
Action 11:25:31: DIRCA_CheckFX.
Action start 11:25:31: DIRCA_CheckFX.
MSI (c) (C4:04) [11:25:31:462]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'DIRCA_CheckFX'
MSI (c) (C4:04) [11:25:31:463]: Creating MSIHANDLE (1) of type 790542 for thread 772
MSI (c) (C4:04) [11:25:31:463]: Invoking remote custom action. DLL: C:\Users\Ian\AppData\Local\Temp\MSI9FD2.tmp, Entrypoint: CheckFX
MSI (c) (C4:9C) [11:25:31:464]: Cloaking enabled.
MSI (c) (C4:9C) [11:25:31:464]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (C4:9C) [11:25:31:464]: Connected to service for CA interface.
CustomAction DIRCA_CheckFX returned actual error code 1157 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (c) (C4:04) [11:25:31:491]: Closing MSIHANDLE (1) of type 790542 for thread 772
MSI (c) (C4:04) [11:25:31:492]: Note: 1: 1723 2: DIRCA_CheckFX 3: CheckFX 4: C:\Users\Ian\AppData\Local\Temp\MSI9FD2.tmp
MSI (c) (C4:04) [11:25:31:492]: Note: 1: 2262 2: Error 3: -2147287038
MSI (c) (C4:6C) [11:25:31:493]: Note: 1: 2262 2: Error 3: -2147287038
Info 2898.For VSI_MS_Sans_Serif13.0_0_0 textstyle, the system created a 'MS Sans Serif' font, in 0 character set, of 13 pixels height.
MSI (c) (C4:6C) [11:25:31:494]: Note: 1: 2262 2: Error 3: -2147287038
DEBUG: Error 2835: The control ErrorIcon was not found on dialog ErrorDialog
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2835. The arguments are: ErrorIcon, ErrorDialog,
Error 1723. There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor. Action DIRCA_CheckFX, entry: CheckFX, library: C:\Users\Ian\AppData\Local\Temp\MSI9FD2.tmp
MSI (c) (C4:04) [11:25:32:678]: Note: 1: 2262 2: Error 3: -2147287038
MSI (c) (C4:04) [11:25:32:678]: Product: EMET 4.1 -- Error 1723. There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor. Action DIRCA_CheckFX,
entry: CheckFX, library: C:\Users\Ian\AppData\Local\Temp\MSI9FD2.tmp
Action ended 11:25:32: DIRCA_CheckFX. Return value 3.
MSI (c) (C4:04) [11:25:32:679]: Doing action: FatalErrorForm
Action 11:25:32: FatalErrorForm.
Action start 11:25:32: FatalErrorForm.
MSI (c) (C4:04) [11:25:32:680]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'FatalErrorForm'
MSI (c) (C4:6C) [11:25:32:681]: Note: 1: 2262 2: Error 3: -2147287038
DEBUG: Error 2826: Control Line1 on dialog FatalErrorForm extends beyond the boundaries of the dialog to the right by 3 pixels
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: FatalErrorForm, Line1, to the right
MSI (c) (C4:6C) [11:25:32:681]: Note: 1: 2262 2: Error 3: -2147287038
DEBUG: Error 2826: Control Line2 on dialog FatalErrorForm extends beyond the boundaries of the dialog to the right by 3 pixels
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: FatalErrorForm, Line2, to the right
MSI (c) (C4:6C) [11:25:32:682]: Note: 1: 2262 2: Error 3: -2147287038
DEBUG: Error 2826: Control BannerBmp on dialog FatalErrorForm extends beyond the boundaries of the dialog to the right by 3 pixels
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: FatalErrorForm, BannerBmp, to the right
MSI (c) (C4:6C) [11:25:32:687]: Note: 1: 2262 2: Error 3: -2147287038
Info 2898.For VsdDefaultUIFont.524F4245_5254_5341_4C45_534153783400 textstyle, the system created a 'MS Sans Serif' font, in 0 character set, of 13 pixels height.
MSI (c) (C4:6C) [11:25:32:687]: Note: 1: 2262 2: Error 3: -2147287038
Info 2898.For VSI_MS_Sans_Serif16.0_1_0 textstyle, the system created a 'MS Sans Serif' font, in 0 character set, of 20 pixels height.
Action 11:25:32: FatalErrorForm. Dialog created
MSI (c) (C4:08) [11:25:32:691]: Note: 1: 2731 2: 0
Action ended 11:25:35: FatalErrorForm. Return value 1.
Action ended 11:25:35: INSTALL. Return value 3.
MSI (c) (C4:04) [11:25:35:322]: Destroying RemoteAPI object.
MSI (c) (C4:9C) [11:25:35:324]: Custom Action Manager thread ending.
Property(C): UpgradeCode = {D12F7559-47B0-4D52-B302-737539A86620}
Property(C): WindowsFolder = C:\WINDOWS\
Property(C): ProgramMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
Property(C): DesktopFolder = C:\Users\Public\Desktop\
Property(C): SystemFolder = C:\WINDOWS\SysWOW64\
Property(C): SourceDir = C:\Users\Ian\Downloads\
Property(C): VSDFrameworkVersion = v4.0
Property(C): VSDAllowLaterFrameworkVersions = False
Property(C): ProductName = EMET 4.1
Property(C): ProductCode = {65BC2BDA-D828-4596-99E4-A8799C45C84C}
Property(C): ProductVersion = 4.1
Property(C): Manufacturer = Microsoft Corporation
Property(C): ARPHELPLINK = http://social.technet.microsoft.com/Forums/en/emet/threads
Property(C): ARPCONTACT = Microsoft Corporation
Property(C): ARPCOMMENTS = Enhanced Mitigation Experience Toolkit 4.1
Property(C): ARPURLINFOABOUT = http://www.microsoft.com/emet
Property(C): ProductLanguage = 1033
Property(C): ALLUSERS = 1
Property(C): ARPPRODUCTICON = _6FEFF9B68218417F98F549.exe
Property(C): SecureCustomProperties = PREVIOUSVERSIONSINSTALLED;NEWERPRODUCTFOUND
Property(C): RedirectedDllSupport = 2
Property(C): VersionNT = 603
Property(C): VSDNETURLMSG = This setup requires the .NET Framework version [1]. Please install the .NET Framework and run this setup again. The .NET Framework can be obtained from the web. Would you like to do this now?
Property(C): VSDIISMSG = This setup requires Internet Information Server 5.1 or higher and Windows XP or higher. This setup cannot be installed on Windows 2000. Please install Internet Information Server or a newer operating system and run this
setup again.
Property(C): VSDUIANDADVERTISED = This advertised application will not be installed because it might be unsafe. Contact your administrator to change the installation user interface option of the package to basic.
Property(C): VSDNETMSG = This setup requires the .NET Framework version [1]. Please install the .NET Framework and run this setup again.
Property(C): VSDINVALIDURLMSG = The specified path '[2]' is unavailable. The Internet Information Server might not be running or the path exists and is redirected to another machine. Please check the status of this virtual directory in the Internet Services
Manager.
Property(C): VSDVERSIONMSG = Unable to install because a newer version of this product is already installed.
Property(C): AdminMaintenanceForm_Action = Repair
Property(C): EulaForm_Property = No
Property(C): FolderForm_AllUsers = ME
Property(C): FolderForm_AllUsersVisible = 0
Property(C): ErrorDialog = ErrorDialog
Property(C): SFF_UpFldrBtn = UpFldrBtn
Property(C): SFF_NewFldrBtn = NewFldrBtn
Property(C): MaintenanceForm_Action = Repair
Property(C): DefaultUIFont = VsdDefaultUIFont.524F4245_5254_5341_4C45_534153783400
Property(C): AdminEulaForm_Property = No
Property(C): WelcomeForm_NextArgs = FolderForm
Property(C): FolderForm_PrevArgs = WelcomeForm
Property(C): FolderForm_NextArgs = EulaForm
Property(C): EulaForm_PrevArgs = FolderForm
Property(C): EulaForm_NextArgs = ConfirmInstallForm
Property(C): ConfirmInstallForm_PrevArgs = EulaForm
Property(C): AdminWelcomeForm_NextArgs = AdminFolderForm
Property(C): AdminFolderForm_PrevArgs = AdminWelcomeForm
Property(C): AdminFolderForm_NextArgs = AdminEulaForm
Property(C): AdminEulaForm_PrevArgs = AdminFolderForm
Property(C): AdminEulaForm_NextArgs = AdminConfirmInstallForm
Property(C): AdminConfirmInstallForm_PrevArgs = AdminEulaForm
Property(C): LAUNCHAPP = 1
Property(C): MsiLogFileLocation = C:\Users\Ian\AppData\Local\Temp\MSIc9f55.LOG
Property(C): PackageCode = {69FDEBF8-3A1D-4011-AAB7-980DF90F569B}
Property(C): ProductState = -1
Property(C): PackagecodeChanging = 1
Property(C): CURRENTDIRECTORY = C:\Users\Ian\Downloads
Property(C): CLIENTUILEVEL = 0
Property(C): CLIENTPROCESSID = 4548
Property(C): VersionDatabase = 200
Property(C): VersionMsi = 5.00
Property(C): VersionNT64 = 603
Property(C): WindowsBuild = 9600
Property(C): ServicePackLevel = 0
Property(C): ServicePackLevelMinor = 0
Property(C): MsiNTProductType = 1
Property(C): MsiNTSuitePersonal = 1
Property(C): WindowsVolume = C:\
Property(C): System64Folder = C:\WINDOWS\system32\
Property(C): RemoteAdminTS = 1
Property(C): TempFolder = C:\Users\Ian\AppData\Local\Temp\
Property(C): ProgramFilesFolder = C:\Program Files (x86)\
Property(C): CommonFilesFolder = C:\Program Files (x86)\Common Files\
Property(C): ProgramFiles64Folder = C:\Program Files\
Property(C): CommonFiles64Folder = C:\Program Files\Common Files\
Property(C): AppDataFolder = C:\Users\Ian\AppData\Roaming\
Property(C): FavoritesFolder = C:\Users\Ian\Favorites\
Property(C): NetHoodFolder = C:\Users\Ian\AppData\Roaming\Microsoft\Windows\Network Shortcuts\
Property(C): PersonalFolder = C:\Users\Ian\Documents\
Property(C): PrintHoodFolder = C:\Users\Ian\AppData\Roaming\Microsoft\Windows\Printer Shortcuts\
Property(C): RecentFolder = C:\Users\Ian\AppData\Roaming\Microsoft\Windows\Recent\
Property(C): SendToFolder = C:\Users\Ian\AppData\Roaming\Microsoft\Windows\SendTo\
Property(C): TemplateFolder = C:\ProgramData\Microsoft\Windows\Templates\
Property(C): CommonAppDataFolder = C:\ProgramData\
Property(C): LocalAppDataFolder = C:\Users\Ian\AppData\Local\
Property(C): MyPicturesFolder = C:\Users\Ian\Pictures\
Property(C): AdminToolsFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\
Property(C): StartupFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\
Property(C): StartMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\
Property(C): FontsFolder = C:\WINDOWS\Fonts\
Property(C): GPTSupport = 1
Property(C): OLEAdvtSupport = 1
Property(C): ShellAdvtSupport = 1
Property(C): MsiAMD64 = 6
Property(C): Msix64 = 6
Property(C): Intel = 6
Property(C): PhysicalMemory = 8052
Property(C): VirtualMemory = 5796
Property(C): LogonUser = Ian
Property(C): UserSID = S-1-5-21-48452953-3679128683-2660926274-1002
Property(C): UserLanguageID = 2057
Property(C): ComputerName = CYRIXINSTEAD
Property(C): SystemLanguageID = 2057
Property(C): ScreenX = 1920
Property(C): ScreenY = 1080
Property(C): CaptionHeight = 23
Property(C): BorderTop = 1
Property(C): BorderSide = 1
Property(C): TextHeight = 16
Property(C): TextInternalLeading = 3
Property(C): ColorBits = 32
Property(C): TTCSupport = 1
Property(C): Time = 11:25:35
Property(C): Date = 30/04/2014
Property(C): MsiNetAssemblySupport = 4.0.30319.33440
Property(C): MsiWin32AssemblySupport = 6.3.9600.16384
Property(C): AdminUser = 1
Property(C): Privileged = 1
Property(C): USERNAME = Ian
Property(C): DATABASE = C:\Users\Ian\Downloads\EMET Setup.msi
Property(C): OriginalDatabase = C:\Users\Ian\Downloads\EMET Setup.msi
Property(C): SOURCEDIR = C:\Users\Ian\Downloads\
Property(C): VersionHandler = 5.00
Property(C): UILevel = 5
Property(C): ACTION = INSTALL
Property(C): EXECUTEACTION = INSTALL
=== Logging stopped: 30/04/2014 11:25:35 ===
MSI (c) (C4:04) [11:25:35:331]: Windows Installer installed the product. Product Name: EMET 4.1. Product Version: 4.1. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.
MSI (c) (C4:04) [11:25:35:333]: Grabbed execution mutex.
MSI (c) (C4:04) [11:25:35:333]: Cleaning up uninstalled install packages, if any exist
MSI (c) (C4:04) [11:25:35:334]: MainEngineThread is returning 1603
=== Verbose logging stopped: 30/04/2014 11:25:35 ===I uninstalled EMET notifier 3 to try out the new 5.0 tech preview. However when trying to install I get an error saying "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support
personnel or package vendor."
I tried installing 4.1 and get the same error. I am running Windows 8.1 Home Premium and have .Net 4 installed. I have turned on verbose logging, apologies for the massive amount of data but I didn't want anything to get missed.
The log file is below. Can anyone suggest what might be going wrong?
Many thanks,
Ian
I am having exactly the same problem. But I also can't even uninstall EMET 3.0 or EMET 4.0 both of which I have installed on my machine. I get the same error message when I try to uninstall them !! I need to uninstall them so that I can install EMET 4.1
or EMET 5.0.
I have been trying to do this for more than a month but without any luck. So any help will be much appreciated.
Thanks,
Mohamed -
Crypto failure when upgrading Windows 8.1 Pro install to Windows 10 Tech Preview 10041
Has anybody experienced the following error when trying to upgrade a Windows 8.1 Pro install to Windows 10 Tech Preview 10041
crypto_self_test_failed
The system reboots twice both times with the same error and then reverts back to Windows 8.1 Pro. This occurs during the upgrade process. Windows 10 never installs.
Thoughts? Suggestions?
Thanks
Eric StenHi Eric,
It seems to be the upgrade self-test fails.
For testing Windows 10, you may consider take use of Hyper-V and install a VM of Windows 10:
Step-By-Step: Creating and Running A Windows 10 VM on Windows 8.1
Or try a dual boot:
How to Dual Boot Between Windows 7 (or Windows 8.1) and Windows 10 Technical
Preview (VHDX)
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
hi,
i'm able to run tech preview 3 of java system web server 7 fine under 32 bit ubuntu 6.06.
however when trying to run it on 64 bit ubuntu 6.06, i get the following when trying to start the initial instance:
27/Dec/2006:01:23:29 info CORE1116: Sun Java System Web Server 7.0-Technology-Preview-3 B09/13/2006 13:14
27/Dec/2006:01:23:29 catastrophe CORE4005: Internal error: unable to create JVM
27/Dec/2006:01:23:29 failure CORE4009: Failed to load JVM (check your JRE)
27/Dec/2006:01:23:29 failure CORE2253: Error running Init function load-modules: initialization of libj2eeplugin.so failed
27/Dec/2006:01:23:29 warning CORE3283: stderr: There was an error trying to initialize the HPI library.
27/Dec/2006:01:23:29 warning CORE3283: stderr: Please check your installation, HotSpot does not work correctly
27/Dec/2006:01:23:29 warning CORE3283: stderr: when installed in the JDK 1.2 Linux Production Release, or
27/Dec/2006:01:23:29 warning CORE3283: stderr: with any JDK 1.1.x release.
27/Dec/2006:01:23:29 catastrophe CORE4005: Internal error: unable to create JVM i've tried several JDKs, including 32-bit 1.6.0, in both 'JVM General Settings' and in 'Administration Server - General Settings' but no luck. any ideas?
the admin server runs fine, but i can't seem to get past this error for the initial actual web server to start up.how much memory and swap space do you have on the system ?
did you try stopping the admin server and then starting this instance ? -
HDMI Audio doesn't work on Windows 10 Tech Preview
I am using a HP ENVY TouchSmart 15-j053cl Notebook PC and often plug it directly into my television for streaming video. However, after updating to windows 10 tech preview the HDMI output for audio no longer appears in playback devices, though video is fine. Upon further inspection I found that the device is not starting via device manager, i.e
"This device cannot start. (Code 10)
{Operation Failed}
The requested operation was unsuccessful."
I attempted to reinstall the driver from the support site for windows 8.1, but that had no effect. The driver I installed
IDT High-Definition (HD) Audio Driver 2013-09-30 , Version6.10.6491.0, 43.95M
Located http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=5390...
Are there any drivers out yet that can bridge the gap from 8.1 to 10?
Any help would be great,
Coletrain@Coletrain
Thank you for using HP support forum. I have sent you a private message. If you’re unsure how to check your private messages please click here.
Thank you,
Omar
I Work for HP -
This newsgroup was created to facilitate on-line discussion of questions and issues pertaining to the WLP / WLW 9.2 Tech Preview. For more information on the Tech Preview program, visit:
http://wlp.bea.com/WLP92TechPreview/
To enroll in the Tech Preview program, contact your BEA Field Rep.Raj,
The Workshop team has addressed a similar question in a previous posting in the list - see that for more details. In summary, the full picture view is coming post GA, speed optimizations are being made.
Regards,
--alex -
No Preview Available in Thumbnails
The past couple of times when I have tried to import pictures from my camera into Lightroom 3, when the thumbnails finally come up, it is just a gray box that says no preview available. I have a little over 28,000 pictures in my catalog and have had no problems importing until recently. I optimize and back up my catalog everytime I use Lightroom, but it is getting slower and slower at importing. Tonight when I tried to import, it just froze and even after waiting about 10 minutes even the gray thumbnails hadn't shown up in the previews. Before tonight, once I imported them, I could preview them. I am importing RAW pictures that average in size from 7 to 15mb, but this has not been a problem until the last 2 imports. Has anyone else had this problem and what can I do to make it where I can import my pictures again?
I am importing images straight from a Canon T1i using a USB port. I have had not problems importing this like this until the last 2 imports and it started giving the grey thumbnails after about 15 pictures had imported out of 167 pictures. The next import would only give the grey thumbnails saying no preview available and when I tried to import tonight it just froze up and still hadn't imported any pictures at all. I am using Windows 7 with a 6GB ram, 64 Bit OS with Intel core Duo CPU T6600 2.2GHz
-
Preview Build Section gone from Windows Tech Preview
So, I noticed that after updating to Windows Tech Preview Build 9860, the preview build section is gone from my settings in zPC settings. Is this a glitch or did Microsoft temporally remove it? Thanks.
It's there, you're just not looking in the right place.
There are two settings Apps - PC Settings and zPC Settings.
Look in PC Settings, under
Update and recovery. The Preview builds section is there in build 9860.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options -
JDeveloper 11g Tech Preview 4 Very Slow
How to increase the the working speed (cache) of JDeveloper 11g tech preview 4. While coding it is taking time to get it typed. During scrolling the page, it is moving very slow. I have tried with changing the value of AddVMOption -Xmx512M in "ide.conf" file. Changed it to 1024. Still there is no difference. Please help me.....
Thank you for your attention
VinsAnd to back up John's words, the TP releases were designated for non-production "preview" use only, were not optimised in anyway, have huge amounts of bugs and are not supported. Best upgrade or you're going to have further issues.
CM. -
Installing Windows 10 Tech Preview on Yoga 13 as dual boot
Hi guys,
I'm new here, but have the Yoga 13 for almost 2 years now.
But that's not the case though
I'm having problems installing the Windows 10 Technical Preview on my machine on a new partition. I have lowered the storage on my Windows8_OS drive with around 40GB. Got everything ready for install and got the Bios to boot from the USB. But when i'm about to choose the partition to install the Tech Preview, the button NEXT won't show. All I get is the message: "Windows cannot be installed on this disk. The selected disk is of the GPT partition style".
As this is the Lenovo Forums, I though you guys might know what causing the problem here.
Hope you guys know what I want and hopefully you have the answer.
Thanks in advance.
Details about my machine:
Processor: Intel i7
RAM: 8GB
Type system: 64-bits
SDD: 256GB
Solved!
Go to Solution.Hi Bro,
I had the same problem, I am using lenovo ideapad yoga 13 with 128GB only. So you have more space.
Anyway, you have to follow the procedure by step by step.
1. Check your system properties about windows x86 or x64 and download the proper iso file in to your local directory.
http://windows.microsoft.com/en-gb/windows/preview-download?ocid=tp_site_downloadpage
Mine is a 64 bit version. So I downloaded x64.
2. Download rufus at below link
http://rufus.akeo.ie/
3. Then insert a thumb drive (at least 16GB) then choose GPT partition scheme and locate the disc image file.
4. Once you are done, restart the computer, go to bios (pressing F2), just check USB is set 1st boot device.
Then you will be able to install on your secondary partition.
Now I am posting this reply from W10-tech preview only. Wish you good luck. If still need more details, please feel to ask me. Thanks
Friendly
Cp -
Running Windows XP where clicking on pdf documents to open them results in Windows Fax Viewer opening displaying the message "No Preview Available". Have tried removing the Acrobat program and re-downloading it, but to no avail.
Are you viewing your CF and SD cards with your camera directly connected to your computer or do you use a card reader?
And are you Mac or Windows?
By the way, Lr 1.0 supports the V-LUX 1. Is that the same as your camera?
Maybe you are looking for
-
How to Delete Duplicate Songs in iTunes 8
Is there an easy way to delete duplicate songs in iTunes 8? A friend of mine with a large CD collection and I share music. The trouble is that in the process of exchanging music we have created quite a number of duplicates. Is there a way to automate
-
Updating data from PSA to Data Target
Hi, I just want to update data from PSA to data target. There is a process chain running daily it will updating Master Data in to 0Vendor object. This process chain is updating only upto PSA not the data target. I just want to update from PSA to data
-
Dear Gurus, Am working in a FMCG environment. Confirmation of operations is required every 15-20 minutes. There are multiple operations in an order. Also, we are using Handling Unit functionality for palletization process. The Handling Unit creation
-
Portal & Oracle Reports Integration
I have a customer that is considering integrating both Portal and Reports. Dependent on the user that is requesting the report, the customer would like to limit the amount of information returned. I am considering suggesting Virtual Private Database
-
[cs3, as2] nested txt not working with XML
Hi im having problems with my xml banner, i have some txt that is nested in a movieclip that animates on as each image is loaded. Initially i couldnt even get the txt to show up, after i used _root, the txt now pops up but only for a split sec and th