TechNet Social login problems on Windows 8.1 w/ IE 11

I'm unable to login to the Technet forums on any of my Windows 8.1 computers with IE 11. This seems to be an issue with the Windows 8.1 Microsoft Account SSO. I haven't tested further, but I have this problem on all of my computers, but I can use Chrome/Firefox
without any issues. Is there a solution to this? If not, is anyone working on a solution? Is there awareness around this issue?
Thank you.

Single sign on also works here no problem on my surface pro 2. Might be this issue though.
SSO service does not work in Internet Explorer 11
If the issue persists I'd probably ask over here.
IE11 on Microsoft Answers
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Similar Messages

Problem on Windows 7 Home Premium cant open program for using codes like visual studio 2012

I have problem my windows 7 Home Premium because of visual studio 2012..I can't open even in several times, I don't know what happen, and sometime it is so low to process whenksn it to open my laptop..Why is that pleas do reply..ASAP! tha

Hi,
According to your description, it seems like VS itself problem, you can try to repair this program through Control Panel for test. If no use, it would be better to post your question at VS forum for further assistance.
Contact VS forum:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?category=visualstudio%2Cvsarch%2Cvsdbg%2Cvstest%2Cvstfs%2Cvsdata%2Cvsappdev%2Cvisualbasic%2Cvisualcsharp%2Cvisualc
Roger Lu
TechNet Community Support

Problem Installing Windows 2008 R2 in BladeCenter HS21 in IBM Storage DS3400

Please someone help
me ..
Hi I have problems installing Windows
Server 2008 R2 on BladeCenter
H (HS21) using IBM Storage
DS3400 (fiber)
I can map the drive to
Hojilla HS21, and the installation
wizard start Windows Server 2008
can see the mapped achieve 60GB
hard drive.
When I try to install it shows me the following
error:
"Setup was unable to
create a new system partitio
or locate an existing system
partition"
It's like that but puediera
create the system partition.
I add the (LUN 0),
and the Logic Controller and
Fiber the place to make a Boot's
(LUN 0)
Please someone give me a solution
to solve this problem.
I used a translator in English because
I only speak Spanish
Thank you.

Hi,
Please check if file allocation size is 4k for boot/system partition. Windows basically does not support non-default file allocation size for boot/system partition.
For more detailed information, please refer to the thread below:
Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information
http://social.technet.microsoft.com/Forums/en-US/42b1023f-ed59-48cb-ab29-4360b8ca457a/setup-was-unable-to-create-a-new-system-partition-or-locate-an-existing-system-partition-see-the?forum=winserver8setup
You could also follow the article below to troubleshoot the issue:
Error message when you try to install Windows Vista: "Windows is unable to find a system volume which meets its criteria for installation"
http://support.microsoft.com/kb/938984
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Unable to login with Jabber Windows

Hi ,
Am unable to login the Jabber Windows Client. Getting the error as "Unable to Communicate With the Server".
Able to login with CUPS & CUCM end user page. CUCM Integrated with LDAP.
While going through the UP Profile logs seen that "Failed to SOAP login".
Tried with restart of CUCM & CUPS several times but no go.
CUCM Version - 8.6.2
CUPS Version - 8.6.1
Tried with CUPC client result also same.
Thanks in Advance

If credentials work on CCMuser CUPSuser I would suspect either some kind of communication problem between the clients and the servers and/or misconfiguration (user/device/line association, device owner, roles, CTI/CCMCIP profiles, etc) on CUCM/CUPS.
Specially because you mention the same happens with CUPC.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

IPod/iTunes problems on Windows XP

Now equiped with 5G iPods, my wife and I tried putting our photo album onto them. We have separate Windows XP logins.
Problem 1: Using the same photo directory was impossible: the "iPod Photo Cache" that is created there is write-protected against users other than the creator. Couldn't it be made shareable, or else created elsewhere than in the shared photo directory root (as is the iTunes music library)?
Problem 2: All our music files are on an external USB hard drive. Up until now, this drive did not need to be connected for me to sync the iPod with the podcasts in my music directory. It would just claim it couldn't find the disconnected files. I decided (given problem 1) to put a copy of our photos on the external drive too. When I tried sync'ing without the drive attached, iTunes got stuck in a busy-loop, using up all the CPU of the machine. I had to kill the process. I copied the photos back to the PC's internal disk, attached the external drive, reconfigured to point to the internal drive and sync'ed. All OK. Then I sync'ed without the external drive being there: looping again!
Problem 3: Windows XP has a much too simplistic approach to assigning drive letters. Even if you use the Computer Management -> Disk Management tool (accessible via the Control Panel's Administrative Tools) to assign a particular drive letter to an external drive, Windows is only too happy using that letter for another, non-assigned drive. Unfortunately, I loaded my songs into the iTunes library when the external drive was labelled G, the first free drive letter on my machine. Short of deleting the library and starting again (something I don't want to do), there is no way I can see to repoint the library references as a group (you can do it file-by-file, but that's incredibly slow and frustrating for even a single directory/album; forget a collection of 6000 songs!). Can this be scripted in some way on XP?
Thanks for any help/suggestions/fixes to iTunes!
Sony VAIO VGN-A190 Windows XP

I have no idea. It is not listed in any App articles and a Google search did not even find a hit for the error number.
All I can suggest is:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

Looking for a site that shows problems with windows patches or updates.

Looking for a site that shows problems with windows patches or updates...so I know what not to install.
Plenty of sites list and summarize individual patches, I want one that consolidates problems and complaints so I can better assess the risk. Currently I'm waiting to install patches several days and doing google searches. That works, but I'd rather find a place
that does it with expertise.
Which forums would be best to look for such problems.
Thanks in and advance for suggestions

Hi,
I agreed with Cyber and Rick.
Windows update helps to keep your PC safer—and your software current—by fetching the latest security and feature updates from Microsoft via the Internet.
Although there might be some problems when installing it, Windows update is not the one to blame.
For troubleshooting Windows updates, if needed:
Fix Microsoft Windows Update Issues
http://support2.microsoft.com/gp/windows-update-issues
Best regards
Michael Shao
TechNet Community Support

Problem with Windows 8.1 and Corseca Byte BT headset

I recently bought a Corseca Byte bluetooth headset.
The headset works fine with phones.
Initially when connected to the laptop running windows 8.1 it works well and continues to flawlessly for hours.
The problem is when the headset is connected to the laptop but there is no audio streaming (e.g paused a movie playback for attending some other job) and resume playback after 10-15 minutes the audio starts stuttering/ becomes choppy. If I switch off the headset
and restart it works fine unless it lays unused for some time.
Windows recognizes the device correctly. I've turned off power management for BT devices and tried to update the drivers without any positive result.
Initially I thought the headset was defective but since it works flawlessly with phones I think it is a problem with Windows 8.1.
How to solve the issue?

Hi,
Have you also tried to disable power management on wireless network connection adapter? Since some OEM computers also combine some features of Bluetooth to wireless network connection adapter.
This issue can be mostly caused by drivers. Please contact the menufacturer's to see if the latest driver is compatible with Windows 8.1.
If not, I suggest you find the driver for Windows 8 /7 and install it in compatible mode in Windows 8.1 to see what's going on.
Also, post back the C:\Windows\Inf\setupapi.dev.log and event log you can find in event viewer related to this issue here for our research.
Kate Li
TechNet Community Support

Oracle 10g express edition browser login problem

Hi
I installed oracle 10g express edition and after installing successfully logged in browser , unlocked hr login and also created one form then I shutdown the database and rebooted my pc and since then when I try to login to "go to Database Home page" after starting database , I get a cookie 127.0.0.1 with username and password, First of all I am not sure what username/password it is expecting, I believe it requires my Windows XP username and password , I tried to enter couple of times my pc login username which has administrator privileges, I also checked it has ora_dba group but after entering pc username , password browser opens saying "unauthorized". I created another os user and tried with that still same. I tried entering oracle password "SYSTEM" and password for it but still could not login, I tried HR username password still nothing.
I tried disabling firewall but still same issue. I tried to re-install two time but still same .
Start database dos prompt does show all the process are started successfully .
I also did ping for 127.0.0.1 and it does ping.
I tried everything what I knew.
Can anyone please help me ..to resolve this issue .

Hi
This is how I resolved the browser login problem .
I checked the listener log
C:\OracleXE\app\oracle\product\10.2.0\server\NETWORK\log
And found the error
TNS-12542: TNS:address already in use
TNS-12560: TNS:protocol adapter error
TNS-00512: Address already in use
I have another version for oracle installed on my pc .
I ended both the oracle process (Oracle.exe) through the Task Manager
Then manually started OracleServiceXe service through Component Services
Control Panel Performance & Maintenance Administrative Component Services
Then did following
Programs Oracle Database10g ExpressEdition Start Database
Programs Oracle Databse10g ExpressEdition Go to Database Homepage
Enter username SYSTEM
Enter password xxxxxx whatever given at the time of installing.
And I did successfully login to the browser .
Hope this will help to those of you who have run into similar problem which I faced
Good Luck .
A. Patil

SHARING COMPATIBILITY PROBLEM IN WINDOWS 7

HI
we have an accounting software very old 2003 model, we use it only to review old database , this software use a share folder (company file folder) (we mapped to Z drive in all machine) it was located in windows server 2003, and every machine will pull the
information for Z drive
I transferred this share folder from the windows server 2003 to windows 7 pro , and sharing exactly the same, with all permission given (everyone full control) and sharing permission as well, and the we face the following problems :
every windows xp client runs the application work perfectly without any problems.
when you open that application for windows 7 machine, even the Z drive is accessible it will tell you the folder location cannot be found, but if you go to the Z drive, and you open that company folder exactly like if you are looking at the folder contents
and keep windows file explorer open, then you open the client application at the same time will work perfectly ,
if I close that folder window, I can keep using that software until I close it then cannot open again..
so the application will only open when a specific folder is open
if I map the Z drive on the same machine contain the file, it will work
when I called someone knows about the software, he told they were doing something in windows registry to solve this but he don't remember what
anyone can help ?

Hi,
Can you run the application without any problems in Safe Mode with networking? If it works, I suspect that the issue is caused by your security programs or firewall.
You may also try running this program with compatibility mode by the steps below:
1. Right click the program's shortcut or the executive file and then click Properties.
2. On the Compatibility tab, check "Run this program in compatibility mode for".
3. Select the Windows xp in the pull down list.
In addition, you may take a look at the following article:
Mapped Drive Connection to Network Share May Be Lost
http://support.microsoft.com/kb/297684
However, if the issue persists, please contact the application vendor and confirm whether there is any update for their product.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Oracle 8i EE Install problems on Windows 2000

Problem 1 - LENGTH OF INSTALL FILES PATH.
The Oracle Universal Installer was coming up fine, but the "Next" button wouldn't do anything. After much trial and error, I discovered this to be related to the path of the install files. Rather than burning to CD, I had copied the install files into a directory C:\ORA816 - when I renamed this directory to just C:\O, the "Next" magically began working. This problem only occurs on Windows 2000, not NT4.
Problem 2 - CREDENTIAL RETRIEVAL FAILED.
I got this error (ORA-12638) from the Database Configuration Assistant. This just happened, so I haven't had a chance to figure it out. Has anyone encountered/fixed this problem in Windows 2000? I am running the install as Administrator.
null

Re: Problem 2. Just found out that this problem is resolved by removing the line SQLNET.AUTHENTICATION_SERVICES from
%ORACLE_HOME%\network\admin\sqlnet.ora
(see: http://technet.oracle.com//tech/migration/workbench/htdocs/relnotes.htm)

Simultaneous login problem

Hi
I am having simultaneous login problems. In the past I have been able to sign into my skype account on both my Mac Book Pro and my Windows 7 desktop PC. However since I had to change my password I can only login into one machine at a time now. Also when I change my password on the desktop PC I can only sign into that skype / computer. Whenever I type the same account name and same exact password on my Mac Book Pro, it says it doesn't recognize my sign-in details but I am 100% sure that I typed it in exactly the same way as I did on my desktop. Another is that when I reset my password on my Mac Book those details won't work on the Desktop PC and vice-versa.
I would like to know what is the problem in this situation, I am not sure if this is an application error or a networking error where the account details are not signing in from a different IP or MAC address.
Please and thank you!

"The load balancing was already functional:"
Do you have a description how to do that?
I Would like to know how.
"so ALL traffic, not going to the LAN network and so over this interface, went out on the DMZ interface, with source IP from LAN."
If you put the VPN servers behind 1-1 NAT instead they will use the firewall as GW and the VPN clients will get at your remote sites/LAN IF you add routing definitions in VPN config what networks are reachable through VPN.
Or you keep servers as they are but also add add more routing definitions in VPN AND static routes to each server with the firewall as gw to those remote networks. Default gw will still be through the DMZ IPs though.
The problem with more than one VPN client from behind same IP address is, with your current server settings, most likely because of the client side NAT router isn't coping with the task. Your public IP VPN server(s) should mean NAT VPN problem is at the other end (customer/client network router/firewall).
If two VPN clients behind same NAT router connected to different servers at your end, "12.34.56.80" and "12.34.56.81" (both are public IPs?) respectively I believe at least two should be able to connect.
3G/4G modems isn't an option?
Maybe try bringing your own tested working portable router (ethernet/wifi maybe includes a VPN client that connect to your servers) to the customer and put it temporarily on their LAN? There are these small new 3G/WiFi routers too. Depends on wether you need to be connected to customer LAN or not.
Try other VPN solution, SSL or OpenVPN?
Use both PPTP and L2TP simultaneously (PPTP could be troubelsome if GRE/TCP 1723 passthrough is disabled)?

Backup Problem with Windows Server Backup

Hello,
we have problems with Windows Server Backup Feature.
Our system is a Windows Server 2008 Standard. On the computer runs a SQL Server 2005.
Since several days no backup can be carried out. We get the error message:
- Error during a Volume Shadow Copy service operation. Detailed error: Failed to process the volume shadow copy: "0x800423F0".
- Errors in the event log: For the started backup an error occured. The volume shadow copy operation was not successful. Error code: "2155348129". Run the backup again after the problem was fixed.
We have already tried to restart the services, uninstalled the Windows Server Backup Feature and reinstalled it, also we rebootet the server several times. Unfortunately, so far without success.
What else can we do respectively where could be the problem?
Kind regards
Sven Otto
KRK ComputerSysteme GmbH (Germany)

Hi Sven,
Please check if there a system partition that is created on the server. If so, assign a drive letter on the partition to check the results.
For more detailed information, please refer to the article below:
Volume Shadow Copy Error 0x800423f0 - writer error: inconsistent snapshot
http://kb.backupassist.com/articles.php?aid=2995
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to view the login log in window NPS after login cisco switch and without SQL server database

how to view the login log in window NPS after login cisco switch and without SQL server database
in summary
there is only log with event id 4400
A LDAP connection with domain controller XCPAWS20.cyberport.noc for domain NOC2 is established.

Hi adil,
For your issue, you can create a custom security token service (STS) and then set up a trust relationship between a SharePoint 2010 farm and the custom STS.
For more information, you can refer to the articles:
http://forums.asp.net/t/1335229.aspx?Sharing+Authentication+Ticket+Between+ASP+NET+and+Sharepoint
https://msdn.microsoft.com/en-us/library/office/ff955607(v=office.14).aspx
http://www.paraesthesia.com/archive/2011/02/01/working-with-windows-identity-foundation-in-asp-net-mvc.aspx/
Best Regards,
Eric
Eric Tao
TechNet Community Support

Problems accessing windows share folders with iMac joined to the domain

Hi,
Following the Apple Seminar (http://seminars.apple.com/seminarsonline/addamac/apple/index.html?s=300) I've joined an iMac (10.6.2) to a Windows Domain successfully and I can login with my windows account.
The problem arises when I try to mount a share folder. Mac ask me if I want to access as a guest or as a registered user, and it's really weird since the folder belongs to the windows user. It seems like Mac doesn't use the login account to access the share folders...
Regards,

Hi,
I'm trying to use the Connect to Server > smb://ipaddressoftheserver (smb://192.168.100.1/implementaciones) but it ask me for the authentication again....
It seems there is a problem with Snow Leopard and AD with .local domains. I've trying this solution:
http://www.edugeek.net/forums/mac/43879-snow-leopard-ad-integration-woes.html#po st549033
Regards,

Client context error message while configuring for social login and personalization

Hi,
I am getting the below exception while configuring for social login and personalization.
27.12.2012 11:21:25.463 *ERROR* [127.0.0.1 [1356587485463] GET /etc/cloudservices/facebookconnect/sample_fb.login.html/callback/connect HTTP/1.1] com.day.cq.wcm.core.impl.designer.DesignerImpl No design at /etc/design/cloudservices. Using default.
27.12.2012 11:21:46.549 *ERROR* [127.0.0.1 [1356587485463] GET /etc/cloudservices/facebookconnect/sample_fb.login.html/callback/connect HTTP/1.1] com.adobe.granite.auth.oauth.impl.oauth2.Oauth2Helper Problems while creating connection.
27.12.2012 11:21:46.549 *WARN* [127.0.0.1 [1356587485463] GET /etc/cloudservices/facebookconnect/sample_fb.login.html/callback/connect HTTP/1.1] com.adobe.granite.auth.oauth.impl.oauth2.Oauth2Helper token was null or not in UNAUTHORIZED state:1
27.12.2012 11:21:46.549 *ERROR* [127.0.0.1 [1356587485463] GET /etc/cloudservices/facebookconnect/sample_fb.login.html/callback/connect HTTP/1.1] com.adobe.granite.auth.oauth.impl.servlet.OAuthProfileImportServlet requestAccessToken: could not retrieve user
27.12.2012 11:21:46.549 *ERROR* [127.0.0.1 [1356587506549] GET /etc/cloudservices/facebookconnect/sample_fb.login.html HTTP/1.1] com.day.cq.wcm.core.impl.designer.DesignerImpl No design at /etc/design/cloudservices. Using default.
27.12.2012 11:21:48.455 *ERROR* [127.0.0.1 [1356587508455] GET /etc/clientcontext/default/contextstores/profiledata/loader.json HTTP/1.1] org.apache.sling.engine.impl.SlingRequestProcessorImpl service: Uncaught SlingException org.apache.sling.api.SlingException: An exception occurred processing JSP page /libs/cq/personalization/components/profileloader/command/load/load.json.jsp at line 41
at org.apache.sling.scripting.jsp.jasper.servlet.JspServletWrapper.handleJspExceptionInterna l(JspServletWrapper.java:574)
at org.apache.sling.scripting.jsp.jasper.servlet.JspServletWrapper.handleJspException(JspSer vletWrapper.java:499)
at org.apache.sling.scripting.jsp.jasper.servlet.JspServletWrapper.service(JspServletWrapper .java:451)
at org.apache.sling.scripting.jsp.JspServletWrapperAdapter.service(JspServletWrapperAdapter. java:59)
Thanks,
Shankar .A

Hi Shankar,
Any luck with this issue. I am also seeing the same issue
Thanks
Pushparajan

TechNet Social login problems on Windows 8.1 w/ IE 11

Similar Messages

Maybe you are looking for