Technical Acknowledgement for the message ORDRSP

Hi
This is a vendor Management Inventory scenario (VMI).We have XI setup between SAP and 3rd party system.
We have a requirement where we are receiving ORDRSP IDOC (Inbound) message from 3rd party system via XI into SAP whenever stock falls below threshold level it creates PO in SAP MM .
Now we want to send technical acknowledgement for the same whenever successful idoc ORDRSP is posted . There are no contents of this acknowledgement message just it means IDOC is "Received".
How can we do this.
Regards
Ashish

My question is answered

Similar Messages

Technical Specifiaction for the ABAP HR Functional Spec

HI Please help me to write a technical spec for the below functional spec.
As-Is Business Process
Duplicate Performance, Development and Career Plans are being created. Forms have been created with incorrect validity dates. Some people that should have forms dont and some that should not have forms do. We have no easy way to periodically audit for these situations.
To Be Business Process
Audit report to be run via the SRET report tree to check for duplicate plans, incorrect validity dates, and actives that are missing forms as well as terms that have forms that are not in completed status.   Should be able to save selections as a variant.
Selection Screen
Use selection screen from YAUMI tcode as a base model. We only need the top bar, the selection section,, and a section for invalid data edits, which will be modified as shown below. Additionally, there should be a section to choose templates.
Template section:
      This section can be modeled after the selection screen in program Y_HRHAP_PDPGEN. Each template is selected via drop down, and the plan end year is entered. Drop down to choose template that shows form name. For development and career, the expected end year is 9999, which would be entered in the year for those 2 templates. For the Performance plan, the current year is the end year, and would be entered.
Invalid Data Edits section:
   Checkboxes for:
1)     duplicate plans
2)     invalid validity dates
3)     missing plans for active
4)     terms with non completed plans
Logic
     Include the templates selected above for associates with the chosen selections.
     If duplicate plans checkbox is selected
            If the plan year end on the screen is 9999, see if there is any associate that has more than one of this template in status not equal to Complete. If so, output to audit report.
            If the plan year end on the screen is less than 9999 (i.e. 2007), then see if there is any pernr that has more than one of this template in a status that is not equal to Complete with an validity end date of 12/31/yyyy (where yyyy is the year on the selection screen). If so, output to audit report.
     If invalid validity dates is selected
        If the plan year end on the screen is 9999, see if there is any pernr that has that template in status not equal to Complete with an end date not equal to 12/31/9999. If so, output to audit report.
            If the plan year end on the screen is less than 9999 (i.e. 2007), then see if there is any pernr with that template in status not equal to Complete with an end date = 12/31/9999, or with an end date with a month and day not equal to 12/31. If so, output to audit report.
     If missing plans for active is selected
     See if there are any people in the selected population that do NOT have any of the selected templates in a status not equal to Complete If so, output to audit report.
      If terms with active plans is selected
     See if there are any people in the selected population that DO have any of the selected templates in a status not equal to Complete If so, output to audit report.
Output
      Appraisee Pernr
      Appraisee Name
      Template name
      Validity Dates begin date and end date
      Status / Substatus
      Appraiser Pernr
      Appraiser Name
      Message :
          Duplicate plan
          Invalid Validity End Date
          Missing plan
          Plan not completed.
      For missing plan error, the fields for validity dates, status/substatus, appraiser pernr and appraiser name will be blank.
Thanks
Raja

Hi IB!
Please check the following links for docu:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/80/ea89395eb58c4f9d0c3e837cf0909d/frameset.htm
Check this for ESS:
/people/srinivasarao.gv2/blog/2005/06/11/configuring-ess-in-sap-enterprise-portal-60
I hope it was in time!
Have a nice day!
Best regards,
Zsolt

Message retry count for the message has been exhausted

Hi,
I am using 'Custom Document Over Internet' with HTTPS as transport protocol. I have set the acknowledgement mode to Sync in order to receive the synchronous response. B2B is able to post the HTTP request successfully and in turn it receives a synchronous response and a MDN message. At the initial stage, after posting the request it shows the state as 'WaitForAck' for request message and for response and MDN messages, the state is completed.
After some time when we check the state of request it is changed to 'Error' with the error message as 'Message retry count for the message has been exhausted'. We have not set the retry count and retry interval and so after retrying for 3 times with an interval of 120 minutes it is showing error state as it is not able to correlate the incoming response to the corresspoding request. We have tried the option of setting the Message id of the request in 'replyToMsgID' parameter of response header and tested the flow. But still I am facing te same issue. Please help me to resolve this issue.

Hi Anuj,
The property mentioned by NandaGopal has already been added in tip.properties file. I sent the B2B logs in debug mode and tip.properties file to your mail id. Please have a look into that. The result of opatch lsinventory command is
Result:
Installed Patch List:
=====================
1) Patch 9234704 applied on Fri Jan 15 16:41:12 GMT 2010
[ Bug fixes: 8870866 9143036 ]
[ This patch overlays patches " 8703410 " ]
[ This patch needs patches " 8703410 " as prerequisites ]
2) Patch 8703410 applied on Thu Jan 07 17:56:08 GMT 2010
Unique Patch ID: 11901808
[ Bug fixes: 7652646 7497854 7664370 8708445 7661101 7007789 6352814 6802446 7665607 7641078 6496457 6013963 8330151 7305413 8619657 7460584 7529893 7458954 7020996 8393885 8210401 6329207 6740403 7126458 6511970 8783577 7379065 7230993 8704965 6774631 7198642 8309511 8392729 7661769 7605518 7479148 6733262 8349002 6736026 7322333 7242500 7239355 8746561 8344645 8451004 7645440 6747966 6369424 6737334 8339176 6774134 7046561 6412124 7210461 7506319 8630406 8235175 7258882 7184318 6453359 7456866 7673646 6043277 7457597 6769895 7193710 8239170 7668247 8404955 8612841 7261965 7132740 7485790 6518386 7305363 6852370 6433256 7673431 6764239 8360048 7501748 7379153 8281019 7498031 8216457 7046574 6875312 6754906 6656289 6417367 7658271 7556011 7000190 6979467 8594506 8691820 6852308 8475848 8518443 7600385 7211208 6732051 8524862 7461051 8263026 7609467 7379161 7672714 6353293 7157229 7594997 7211287 7034069 7563311 6822375 6640935 7359202 6769261 6919593 8601869 6029507 6974391 7139013 7518641 8605719 6817264 7501903 7496014 7576785 8666761 7130151 7322581 5523563 7680097 8508905 7241737 7660780 8480395 7660781 7191994 6924921 7672723 8432093 6800745 8703404 8540335 8507242 8608121 8217566 7481317 6639030 6200414 7529795 7354853 8475867 7376270 7303860 7016005 7678901 7368610 8992520 6881977 6016128 7033061 6397084 7672730 8703410 7709562 6449656 7045589 8508054 6491068 7378745 7643811 7435853 7615836 8707416 6447557 7379042 6940476 7670634 6950383 6764273 6962327 7478322 8546454 7157324 8871403 8862082 7184219 7672744 7164618 7672745 7230184 7576730 7590301 8746541 7261863 8327427 6769430 8295683 7526186 8298731 6414280 6139955 6646997 7692853 8233048 6794296 7457066 8552373 8225241 7706387 7204022 ]
3) Patch 4601861 applied on Fri Nov 14 04:24:08 GMT 2008
[ Bug fixes: 4601861 ]

S/A bridge problem: No object type found for the message

Hi all,
I've been spending days looking into the following problem. I have a RFCXIFile scenario. The R3 system sends data via an RFC to XI and XI post the data as a flat file on a certain server using FTP.
This scenario worked just fine for 1 exception. I could only run this scenario once. The second time I got timeouts when checking the data sent to my RFC destination using SM58. When I reactivated my RFC communcation channel I could again send 1 RFC to the system. All subsequent tries would fail.
I guess this is due to the fact that I use a synchonous call (RFC) to an asynchronous one. Thus the adapter is still waiting for the response from the XI system and will not accept any further new calls from R3.
So I figure let's use this pattern called the S/A bridge. So I designed everything according to guides and examples and I'm quite certain everything is configured right but when I run the scenario I get the following message:
<i> 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No object type found for the message. Check that the corresponding process is activated</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error></i>
It seems that the adapter cannot find any integration process to send the message into!?
I've looked at numerous threads on sdn and tried all kinds of stuff (looked at the cache==> code 0 = OK , tried to reactivate my integration process, checked the interface determination,...), but to no avail. Does anybody has an idea what could be wrong ?
Any help would be greatly appreciated for I'm all out of clues....
Bob

First of all, Thank you for trying to help me out here.
Some answer to your suggestions/questions:
The IP has return code 0 in SXI_CACHE. so that doesn't seem to be the problem.
I've checked the BPM for syntax errors. I doesn't have any.
I've reimported the BPM into the integration directory.
And did a full cache refresh in SXI_CACHE. Return code is (stays) zero, so that's OK.
I've already included the error message from SXI_MONI. It is in the last step ("Call Adater") that the error occurs.
The other steps execute just fine...
The RFC communcation channel accepts the incoming RFC call and puts into the pipeline, so no problems with the communication channel either. the problem is actually when the pipeline is trying to forward the message into an IP trhough the BPE_ADAPTER (according to SXMB_MONI).
Therefore I'm not able to go to into PE, because the workflow is never started. the BPE_ADAPTER does not find any active process for the interface determination i've entered.
So i can not debug the IP in the PE and check container variables, like some of you mentioned.
Maybe some more information about the scenario:
The RFC is called from an R3 system to XI over the interface "CONTROL_RECIPE_DOWNLOAD", which is an imported RFC, with a request and response message type.
Then I got a receiver and interface determination with lead the incoming RFC message to the IP, into interface "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI".
This is an abstract synchronous interface based on the request and response types of the "CONTROL_RECIPE_DOWNLOAD" imported RFC.
This interface is used the first step (receive) of my BPM as the synchronous interface to open the S/A bridge.
The message (container var) used in this step is
name: CORREQ
Category: Abstract interface
type: "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI"
The interface "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI" is an abstract, asynchronous interface based on the request type of the "CONTROL_RECIPE_DOWNLOAD".
Then there are 2 send steps for putting the flat files into place and finally i close the the S/A bridge using message:
name: CORRES
Category: Abstract interface
type: "XI_ERP_MF_MD_CONTROL_RECIPE_RES_AI_MI"
The interface "XI_ERP_MF_MD_CONTROL_RECIPE_RES_AI_MI" is an abstract, asynchronous interface based on the response type of the "CONTROL_RECIPE_DOWNLOAD".
I hope this information gives you guys a better understanding of hte problem.
Really looking forward to see more suggestions and to solve this nasty problem ...
Regards,
Bob

How to Disable client side validation for the message text input

Hi,
I have scenario where i need to by pass the client side validation for a message text input
Scenario is
I have a message text input field(say XYZ), i set the max length for the item as 20
Now when im trying to enter the greek characters into it, it is allowing me to enter till 20 characters
But when i try to submit the form ..my client side validation is firing..
The Error says the XYZ is too long
The problem is, in greek each character takes two bytes.(In english it is only 1).While entering the content it allowing 20 characters and when validating it is checking for bytes(if we enter in greek the length will be 40 bytes not 20)
I cannot increase the max length .coz i have restrict the character length to 20 only.(english or Greek).
Please help me in this regard.
Regards
Sandeep.

Thanks for the information.But we dont have any option either declaratively or programatically to disable the client side validation for the message text input..I referred java docs ..i dint find any method which does..
Correct me if im wrong

How to display Help for the message in our program

Hi Experts,
Do any one know how to display the HELP for the Message in our ABAP program? Just like the user click the Long Text button in SE91.Do we have any function modules or Class method to do that? Thanks in advance.
Joe

Hi Joe,
While creating a message class in se93, theres a button (documentation) on the application tool bar. Click on that and you will be lead to a text editor where you can fill in the necessary documentation for the message you have created.

I've lost a load of notes, but dont know why or how to get them back. I cant find the folder that is in my Yahoo account that people have suggested might be the location for the messages. I recently signed into iCloud for the first time.

I've lost a load of notes, but dont know why or how to get them back. I cant find the folder that is in my Yahoo account that people have suggested might be the location for the messages. I recently signed into iCloud for the first time. Any idea how to get the notes back? I really dont want to lose them.

It should keep asking for the password, because it's trying to check for purchases... As soon as you login, it will see you have pending downloads and create the downloads section on the left below Purchases under the Store section. Then it will start the music downloads there, as they will be listed one below the other.
You could just try to check your account balance or view your account and that will trigger a password request too. You can just click on that and say that now iTunes keeps asking for the password and ask him to help you with that. Trick would be to interrupt him so that he carries on with another task after, so he doesn't notice the download. Or you carry on with email or browsing which you were "busy" with when iTunes interrupted you for the password (stupid iTunes)

Get amount of megabytes for the message transfer per day, month, year

Dear experts,
can you please tell me the name of the report which can be used to get the amount of megabytes for the message transfer per day, month, year etc.? I can't find it in our system.
Best regards,
David

Hi,
Check this blog: /people/gourav.khare2/blog/2007/12/12/interesting-abap-tables-in-xi-150-part-i
SXMSPFRAWH: this table contains runtime performance data for successful message and sender and receiver information is stored as address id that derive information from SXMSPFADDRESS, from this table you can find out volume and latency also.
Regards,
Gourav

Why does recievig partnerrequire outbound parameter setting for the message

Hi,
I was configuring the partner profiles for outbound billing and sales order cycles.Interestingly for outbound scenario, we had to maintain the settings for outbound parameters in receiving partner.
For example, if i sending ORDERS message type from sender to receiver, then after maintaining the details in partner profile(outbound parameters for sender in we20) for sender, then not only i need to put the orders details in inbound parameters for reciever, but also the outbound parameters for receiver(both inbound and out bound parameters to be filled for the message type for reciver partner).
I checked other systems and founf this is how it is being maintained in outbound cycle.But could anyone provide any insight of why this is required.I did not find anything from bd64 or others about this.
why would the outbound parameters needs to be filled for particular message type in reciver sytem, when it is only required to fill the inbound parameters only for receiver system?

I got help for this issue over at CreativeCow's FCP pages -- it turns out, all I had to do was open a new project using an easy setting and project setting for vanilla PAL 25 fps SD stuff. All of the audio was correctly brought in -- then I disconnected all of the clips, made them dual mono, reconnected them, and copied them over to my old gristly project folder.
Now I can marry these dual mono 25fps files to the video files without having FCP incorrectly compensate for "30fps" by speeding these clips up slightly, so things stay in sync.

Modify the message type for the Message no. CK239

Hi,
I would like to change the message type E to W for the message CK239.
Is it possible?
Thanks.
Jean-Marc

Hi,
yep, agree with Eli. Please check this [thread|Re: T-code SE91 queries ??; on the issue of changing messages.
Rgds
Karl

Technical content for the BI statistics

Hi Guru's
What is technical content for the BI statistics and where do I find this???
I want to know what is the procedure to know which query is mostly executed in the system and by how many users.
Thanks & Regards.

Hi,
What is technical content for the BI statistics and where do I find this???
you can enable this facility
go to RSA1> tools >bw statistics>here we have two options like OLAP,WHM ,if you chk OLAP for the respective cube,now it will display all the related infromation i.e all the details of the queries pertaining to the cube
WHM will store all related data staging related information
want to know what is the procedure to know which query is mostly executed in the system and by how many users
the below cubes will meet your requirement
0BWTC_C10_Q011 OLAP Use per User
0BWTC_C10_Q506 OLAP Use per User (Total Number of Records)
0BWTC_C10_Q505 OLAP Use per User (Total Time)
0BWTC_C10_Q503 OLAP Use per User (Time)
chk the below link
http://help.sap.com/saphelp_nw04/helpdata/en/88/3e1f3b5839e10fe10000000a114084/content.htm
Once you install technical content you can use the features of BW statistics etc..
Cheers,
Swapna.G

Distribution Model for the Message

want to create a filter for my Distribution Model for the Message Type HRMD_A .
The filtering should be based on Company Code .
I'm getting only infotypes but now should I filter based on Field BUKRS ?

1. Go to Tcode BD59.
2. Create a Custom ALE Object Type
3. Specify the corresponding Segment name where BUKRS exists and the Field Name as BUKRS.

HT201363 I forgot the security question and did not reach me any e-mail from an email technical support for the alternative I hope to help

I forgot the security question and did not reach me any e-mail from an email technical support for the alternative I hope to help

Alternatives for Help Resetting Security Questions and/or Rescue Mail
     1. If you have a valid rescue email address, then use this procedure:
         Rescue email address and how to reset Apple ID security questions.
     2. Fill out and submit this form. Select the topic, Account Security. You must
         have a Rescue Email to use this option.
     3. This is the only option if you do not already have a valid Rescue Email.
         These are telephone numbers for contacting Apple Support in your country.
         Apple ID- Contacting Apple for help with Apple ID account security. Select
         the appropriate country and call. Ask to speak to the Account Security Team.
Note: If you have already forgotten your security questions, then you cannot
         set up a rescue email address in order to reset them. You must set up
         the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
                         Apple ID- All about Apple ID security questions.

Is there anywhere a technical manual for the NB100 ?

Is there anywhere a technical manual for the NB100 ?
I want to replace my internal harddisk with a bigger one and don´t want to destroy anything so a manual for the best way to open the NB100 would be a good thing :-)
cola

The upgrade is not that hard. There is no need to completely disassemble the unit. Remove the screws from the underside, then remove the cover at the top of the keyboard (the cover with the on/off switch on). Remove the screws from under the cover and then remove the keyboard, gently unclipping the ribbon. unclip the ribbon for the touchpad and the wireless aerials (x2). At this stage the HDD is accessible on the left side, remove the screws and gently pull the HDD out.
Once the new drive is fitted, reverse the procedure. I had no option but to replace mine, as I was on an overseas trip when the Toshiba HDD failed (the system was saying I had no HDD fitted) and as I had only taken the NB100 with me I had no choice if I wanted a working laptop for the trip, I stripped my external HDD and fitted it into the NB100, I now have a NB100 with a 250 GB HDD and it's perfect.

Filter Infotypes based on Company Code for the Message Type HRMD_A

Hi,
I have a requirement to send different infotypes for different Company codes using the same distribution model for the message type HRMD_A.
Example :
For the BUKRS 2500 I need to send infotype 0000 ,0002,0006
For the BUKRS 2600 I need to send infotype 0000 ,0008,0009
It will be a great help for me if any one can guide me on that.
Regards,
Raka

Hi ,
Thanks for the reply.
I alredy have done that . But its not working.
Its working only for infotype 0001.
If the infotype is there in any of the filter groups, the data will be sent irrespective of the Com Code.
Regards,
Raka

Technical Acknowledgement for the message ORDRSP

Similar Messages

Maybe you are looking for