Technical content activation for BI STAT and Admin cockpit

Hi friends,
I am going to setup the IMG call for BI STAT and Admin cockpit. If i run the technical content activation will i need a precaution for other data loading. If i run them in background does it affects other data loads. did i need to take down time for the whole system?
After the implemntation did i need to load data for all infoproviders in quality system.

Hello Suresh,
I am not clear on all your questions.
In general, technical content process chains load data similiar to other BI process chains.
if your system is productive for a longer period already ( > 6 months ), there may be a lot of
BI statistics data generated and this will take a longer time to load the technical content cubes during the initial load.
Otherwise, it should not affect system performance.
It is better to schedule them daily to avoid huge data loads.
But these are only guidelines. It depends on your need.
You would need to do separately for quality and production system, if you want the BI stats in those systems. This is similiar to any other Data load and cube and content in BI.
Thanks,
Bilal

Similar Messages

BI Statistics Technical Content Activation Error

I got some errors when activating BI Statistics technical content in SPRO and could not find any information about this error on SDN. I would really appreciate your help.
Thank you.
Tony
Below is part of the error message from job log:
Variant '0PAK_472D695A0ZS3DWVBA4H1OO9A6' of process type 'LOADING' not found in A version
A type "Attribute Change Run" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in the chain
A type "Data Transfer Process" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in the chain
A type "Generate Index" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in the chain
A type "Activate DataStore Object Data" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in th
A type "Data Transfer Process" process has to follow process "Execute InfoPackage" var.0PAK_E8U9KCLMI7HW76ZSYTSL0N7NA in the chain
A type "Generate Index" process has to follow process "Execute InfoPackage" var.0PAK_E8U9KCLMI7HW76ZSYTSL0N7NA in the chain
A type "Data Transfer Process" process has to follow process "Execute InfoPackage" var.0PAK_EAYZPOK7VL8KCD6D6HI3UYUT2 in the chain
A type "Generate Index" process has to follow process "Execute InfoPackage" var.0PAK_EAYZPOK7VL8KCD6D6HI3UYUT2 in the chain
A type "Generate Index" process has to follow process "Execute InfoPackage" var.0PAK_44I75TQHBEZKMPJT67XC0VKQJ in the chain
Version 'M' of chain 0TCT_C0_DELTA_P01 was saved without checking
InfoPackage no longer exists in object version A in table RSLDPIO
Variant '0PAK_472D695A0ZS3DWVBA4H1OO9A6' of process type 'LOADING' not found in A version
A type "Attribute Change Run" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in the chain
Version 'M' of chain 0TCT_C0_DELTA_P01 was saved without checking
Start of Process Chains
ABAP/4 processor: UNCAUGHT_EXCEPTION
Job cancelled

Hi Ramesh,
That's the point. Admin cockpit pops up a message:
"Before you can call the BI Administration Cockpit, the technical content has to be installed and customized."

Just bought 2 Apple 6 plus phones. Cannot get my husbands email to connect. He works for the state and not sure if that is the problem or not. All his information is correct.

Just bought two new iPhone 6 plus phones. Cannot get the email to load on my husbands phone for his work. He works for the state and I don't know if that is the issue or not. Any suggestions?

Your husband should contact his IT department at work to find out if he is allowed to set up his work email on his personal device and if so, how to do it.

Statistics technical content activation issue with MD process chain in BI7

Hi,
Let me give you history of the issue first.
I had to activate the Statistics in BI7. I followed the SAP Note 965386 and activated the Technical Content.
Faced activation issues in MD process chain, Content Master Data-0TCT_MD_C_FULL_P01. It dint get activated, Followed the SAP note 1065919, which asked me to remove the below process from RSPC and activate it.
Load data- Process Variant Attribute and
Load data- Process Variant Text.
I did the same and it got activated after removing them.
Issue is. Later knew that manually activating the Process chain from Content would have activated those Infopackages aswell.
Now how should I get those processes into the chain and activate? Based on your suggestions, I can let you know what all I have been trying to fix it?
Relying on you for solution.
Thanks
Pavan

Thank You Neethika,
I have this issue solved. I replicated the data sources, activated those infoPackages manually and then added those variants into the process chain manually. So my MD chain now has all the necessary process.
Now i need to schedule them and see if it runs with out any errors. I will keep this thread open till i run it to take your help if i get any errors while running them.
Thanks
Pavan

Urgent-Technical content Activation

Hi all,
I had a basic question.
I am activating Technical Content in BW.Do we have to activate the datasources in R/3 system and then replicate it in BW.Just like any other datsources?
I was under the assumption that activating the objects related to Technical contetn does not have to deal with R/3 system.As i see the datasources under the Bw system under the source system.
Please correct me if iam wrong?This is an urgent issue,appreciate with any help provided.

Hi sreenivas,
that was a very helpful answer.Now i can say that my doubt has been clarified "if i have to activate DS in R/3 for Technical Content".
But my other question is when i transport it to QA.I have been getting the following logs.
Warnings:
Application component TCT of DataSource 0BWTC_C02 does not exist Etc for each DS.
Errors:
DataSource 0BWTC_C02 does not exist in source system QBWCLNT100 of version A
Mapping between data source 0BWTC_C02 and source system QBWCLNT100 is inconsistent
Field CALDAY will not be delivered from DataSource 0BWTC_C02 in source system QBWCLNT100 Etc
I get a RC 8 on this.I checked the DS 0BWTC_C02 in Dev and it was in active version so saved it and retransported it but the same message.
please advice.
thanks in advance

Technical Content Activation failed

Hi guys,
I tried to activate Technical Content via SPRO's Activate Technical Content in SAP NetWeaver BI.
However, I am facing with these problems:
1. If I choose only Activate SAPI DataSources, I will get a time out.
2. If I choose only Activate Technical Content, I will get the following error message:
Runtime Errors         UNCAUGHT_EXCEPTION
Exception              CX_RS_VERSION_NOT_FOUND
Date and Time          23.07.2008 09:38:27
Short text
     An exception occurred that was not caught.
What happened?
     The exception 'CX_RS_VERSION_NOT_FOUND' was raised, but it was not caught
      anywhere along
     the call hierarchy.
Since exceptions represent error situations and this error was not
     adequately responded to, the running ABAP program
      'CL_RSSM_LOADING===============CP' has to be
     terminated.
What can you do?
     Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
     administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_RS_VERSION_NOT_FOUND', was not
     caught in
    procedure "CHANGE_VARIANT" "(METHOD)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    Object   could not be found in version
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
"UNCAUGHT_EXCEPTION" "CX_RS_VERSION_NOT_FOUND"
    "CL_RSSM_LOADING===============CP" or "CL_RSSM_LOADING===============CM00G"
    "IF_RSPC_TRANSPORT~KEY_CHANGE"
If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
     Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
     In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"CHANGE_VARIANT" "(METHOD)", or its possible occurrence must be declared in the
RAISING clause of the procedure.
To prevent the exception, note the following:
Can someone help to me solve both problems???Thanks!!

Hi,
Aks your Basis person to look into the dump in tcode ST22. Also you can check in the SAP notes for error message displayed in the dump. There you find the correction notes.
Mostly this problem is related to Service packs.
Regards,
Sreenivas.

Technical Content Activation Failed in BI7

Dear experts,
Basically, I have posted this question in another category but the response is very disappointing. So I though of moving the question to here.
I am using SAPKW70015 i.e. Release 15. I tried to activate Technical Content via SPRO's Activate Technical Content in SAP NetWeaver BI.
However, I am facing with these problems:
1. If I choose only Activate SAPI DataSources, I will get a time out.
2. If I choose only Activate Technical Content, I will get the following error message:
Runtime Errors UNCAUGHT_EXCEPTION
Exception CX_RS_VERSION_NOT_FOUND
Date and Time 23.07.2008 09:38:27
Short text
An exception occurred that was not caught.
What happened?
The exception 'CX_RS_VERSION_NOT_FOUND' was raised, but it was not caught
anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_RSSM_LOADING===============CP' has to be
terminated.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_RS_VERSION_NOT_FOUND', was not
caught in
procedure "CHANGE_VARIANT" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
Object could not be found in version
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_RS_VERSION_NOT_FOUND"
"CL_RSSM_LOADING===============CP" or "CL_RSSM_LOADING===============CM00G"
"IF_RSPC_TRANSPORT~KEY_CHANGE"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"CHANGE_VARIANT" "(METHOD)", or its possible occurrence must be declared in the
RAISING clause of the procedure.
To prevent the exception, note the following:
Can someone help to me solve both problems???Thanks!!

Hi,
Aks your Basis person to look into the dump in tcode ST22. Also you can check in the SAP notes for error message displayed in the dump. There you find the correction notes.
Mostly this problem is related to Service packs.
Regards,
Sreenivas.

BI 7.0 Technical Content Activation

We have performed the technical upgrade from 3.5 to 7.0 and are in the process of performing the Post Upgrade steps. We are currently updated to level: SAP_BW 7.00 SP15.
One of the Post Upgrade steps referenced in the "How to ... Checklist: Rapid SAP NetWeaver 7.0 BI Technical Upgrade with BI Accelerator Implementation" SAP document references the the activation of BI Technical Content (even if there are no plans to use it). Our problem occurs when we attempt to activate the required Technical Content objects via IMG (TCode SPRO). When the activation reaches the Process Chain activation a couple of the Process Chains reference objects that are not available at our content patch level.
I have researched and understand the workaround discussed in OSS 1134944. My question is more general. Is the activation of the Technical Content absolutley required - even if we have no plans to make use of it initially? If so, can someone please explain why this is the case.

Ramesh,
I understand the purpose and usage of Business Content in BI. As I stated in my thread, the Post Upgrade How To Guide implies that the activation of the Technical Content (a component of BI Business Content) is required in 7.0 - even if there are no plans to use it. Since we are having problems with the activation of the Technical Content my question referred only to its objects. We are trying to understand why (if) this component of the Business Content is actually required as the document implies.
Dan

BW Business content activation for BPC 7 NW.

What are the standard business contents needs to be activated for BPC7NW installation in BW?
I means any infoobjects, cubes specific to BPC which can be activated in BW/BI server.
Please let me know any input or links.

Hi Manilyer,
Good question.
This topic is covered in the BPC NetWeaver installation guide that in on the service marketplace.
http://service.sap.com/instguides
The post activation activities are made up primarily of two things.
1) Activation of the delivered BPC Process Chains.
Within the DW Workbench goto the Business Content tab and search for all process chains with the prefix /CPMB/* and activate them all.
2) Activation of ApShell
You can do this by running the program UJS_ACTIVATE_CONTENT. This is not exactly Business Content however somewhat similar. This will create the cubes, infoObjects etc that make up Apshell and load ApShells applications with Data.
Hopefully this is helpful.
Cheers, Scott
Edited by: Scott Cairncross on Jul 30, 2009 1:51 PM

Technical Content Cube for Multi Provider Information???

Hi all,
Can anyone suggest which Technical Content Cube will give Information about Multi Provider and its underlying Info Providers(Last load tiem of Info Provider)?.
Thanks
Deepika

Hi,
We have tables which gives the information about that, if u want u can create a view on these tables in RSO2 in BW and load the data to the Zcube.
Below are the tables.
RSDCUBE - Directory of InfoCubes
RSDCUBEIOBJ - Objects per InfoCube (where-used list)
RSDDIMEIOBJ -
RSDCUBEMULTI -InfoCubes involved in a MultiCube
RSDICMULTIIOBJ - MultiProvider Selection/ Identification of InfoObjects
Sorry for the post its my misunderstanding....
For bw statistics the above post will help u....
Khaja
Edited by: khaja on Feb 25, 2008 12:46 PM

CAD Real Time Stats show NA for agent state and call log

Hello
For our lab uccx, the agent/users CAD display shows NA for the agent state and call log. I have
Not Ready and Log out codes set and have the testers do those actions to generate data.
I have rebooted the server and have also checked the services page and confirmed
all the services are running.
I went through the admin guide to see if I missed any configuration but does not appear so.
I tried launching the real time stats tool from the UCCX Admin and it launches OK
but I noticed that it shows not connected.
Note this is over a VPN to the UCCX.
So not sure if this is related. I checked the relase notes and this is the base install
of UCCX 8.5. I am going to install the service updates but wanted to see if I can
get this running before I schedule a maint window to do the upgrades.
Thanks
Mike Kana

Hi
you might be facing an issue where " uccxcaduser password" gets corrupted , which leads to the issue you are facing right now
you have to contact TAC to reset that password for you and your issue will be fixed ,100%
Note : Only TAC can reset this password

ID 5.5 Interact. PDF, cannot remove white background for Multi-States and buttons.

Hi
I am working on an Interactive PDF Portfolio document. The problem I have is with Multi-State object feature with several buttons going to states that need to be exported as a SWF and imported back into InDesign 5.5. See, the background of my entire doc. is GREY, but when I import the SWF (as directed in Lynda.com videos correctly) and export the entire doc as Interactive PDF and view it in Adobe Acrobat Pro (version 10.1.1) is when all the trouble starts.
When I try to get rid of the WHITE background around the Multi-State objects and the buttons for them (using Select Object Tool and then control+click on it to change the Properties to Transparent Background Appearance) it does not change, even when I go forward and backward to the page.
Does the option of removing white background and making it transparent work only for Animation, but not Multi-State feature with buttons?
Can anyone suggest any other tecnique to create a nice slide show that works in Interactive PDF in ID CS5.5? Please..
Sincerely,
in need of help,
Eve

I have 8 Multi-State objects in one stack on the left and the 8 buttons for each state in the stack on the right. The background of my document is dark grey. There is space inbetween Multi-State objects and the buttons that show the grey background. But after exporting as SWF the Multi-States together with the buttons and placing the SWF back in the PDF file, the space inbetween Multi-States and buttons that is supposed to show the grey background appears white. The problem is that I cannot even change this white background to transparent in Acrobat Pro, as well. I used to do that to animations and it worked, but not in this case.

Technical Content Activation

Hi
Iam trying to activate technical content from Bus. content are and being unsuccessfull.
Steps i took
    Collected the technical content objects.
    Marked all of the objects to be installed.
    Ran install and nothing happenned.
    Then i tried to simulate the install, it is
        saying Role SAP_BWC_TCONT already exists.
Went back to Info providers sections and deleted all of the already existing series of info cubes from
0BWTC_C02.... C11. Delete the multiprovided C10 too.
assuming that this will clear up the role.
Once again tried the simulation and the same error comes up. Not sure how to to delete the role.
Please let me know how to do this.
Sampath

Hi,
By using T. Code PFCG we can create/ Edit the roles. So you can go to the T.code and choose the role and delete.
Thanks & regards,
Venkata Sharma.

BI content required for Real Estate and Plan Maintenence

hi;
I have BW 7.0 server with BI_CONT addon and support package level is 6 ie SAPKIBIIP6.
now we need the business content for real estate and plan maintenence. i have read documents which contains the business content , but i couldnt find the particular one am searching for ie..real estate and plan maintenence....
should i update the patch?
regards
seethy
Edited by: Seethy Meerasahib on Jun 18, 2008 1:57 PM

hi
its already available in the InfoProvider..
Real estate comes under= Financial management and controlling
Plant maintanece = Defence force and public security..
regards
seethy

Only technical name showed for workbook in BI Administration Cockpit

Hi,
When I use the BI Administration Cockpit, for BI Application Statistics under Query Runtime Statistics,
only technical name showed for workbook. Is it possible to also show the name and how to do?
Many Thanks
Jonathan

hello,
you can check out some webinar on the same:
Webinars
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/15c54048035a39e10000000a422035/frameset.htm
Regards,
Dhanya

Technical content activation for BI STAT and Admin cockpit

Similar Messages

Maybe you are looking for