Technical content : aggregate statistics cube info

Hi Experts,
can anyone let me know which cube should be used for aggregate statistics in BI7 ( 0TCT* ).
similar to the statistics from cube 0BWTC_C04.
Many Thanks,
Neeraj.

Hi ,
Please refer to the below link,
http://help.sap.com/saphelp_nw04/helpdata/en/72/e91c3b85e6e939e10000000a11402f/frameset.htm
Hope it helps,
Rgards,
Amit Kr.
Edited by: Amit Kr on Oct 13, 2009 2:39 PM

Similar Messages

Technical Content(Statistics)

Hi,
Previously I installed the BI statistics manually (not over SPRO). During the activation the system created datasources in all conected systems like R/3 dev. system. Also the activated process chains include the delta loads from these R/3 based datasources.
My doubt is, the existing dataload steps in the process chains might be wrong. Can anyone tell me which datasources should be used from R3 side and which should be the BW based?
The process chains I mentioned are:
Content Master Data
System Master Data
Data Load Statistics - Delta
Load Statictics Data Delta
Query Runtime Statistics - Delta
Thanks
Senoy

Senoy,
Statistics load from BW only. Not from R/3. all data sources are from BW only.
Please check:
[BI7: Administration Cockpit Technical Content BI Statistics|http://sapbwneelam.blogspot.com/2008/10/administration-cockpit-technical.html]
[BW 3.5: How to setup bw statistics|https://www.box.net/shared/us1b13ijq2]
Hope it Helps
Srini
[Dont forget to close the call by assigning poings.... - Food for Points: Make a Difference through Community Contribution!|https://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/007928c5-c4ef-2a10-d9a3-8109ae621a82]

How can i use Bi-Technical Content is used for measuring the performance of

Hi
recenetly i implemented the BI7.0 for one client. I want to know how to use 'BI Administraction Cockpit,.
Actual what technical content does ???
And how can i use technical content or statistics for measuring the performance of my queries. Please let me know
kumar

Hi Ravi,
BI Admin Cockpit is enhancement of BW Statistics.
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/08a75d19e32d2fe10000000a11466f/frameset.htm
Check this thread also:
BI Statistics comparision with the old
Regarding the performance check the link below.
Re: Query - Performance
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/15c54048035a39e10000000a422035/frameset.htm
Regards,
Anil

Technical Content Cube for Multi Provider Information???

Hi all,
Can anyone suggest which Technical Content Cube will give Information about Multi Provider and its underlying Info Providers(Last load tiem of Info Provider)?.
Thanks
Deepika

Hi,
We have tables which gives the information about that, if u want u can create a view on these tables in RSO2 in BW and load the data to the Zcube.
Below are the tables.
RSDCUBE - Directory of InfoCubes
RSDCUBEIOBJ - Objects per InfoCube (where-used list)
RSDDIMEIOBJ -
RSDCUBEMULTI -InfoCubes involved in a MultiCube
RSDICMULTIIOBJ - MultiProvider Selection/ Identification of InfoObjects
Sorry for the post its my misunderstanding....
For bw statistics the above post will help u....
Khaja
Edited by: khaja on Feb 25, 2008 12:46 PM

BW Statistics and Technical Content

HI,
I am working on BI 7.0.
I understand both BW statistics and Technical content are used to monitor the system status to improve performance. But what I dont get is teh exact difference between these two.
BW statistics provides the follwing Dataprovider:
0BWTC_C02     BW Statistics - OLAP
0BWTC_C03     BW Statistics - OLAP, Detail Navigation
0BWTC_C04     BW Statistics - Aggregates
0BWTC_C05     BW Statistics - WHM
0BWTC_C09     BW Statistics: Condensing InfoCubes
0BWTC_C11     BW Statistics: Deleting Data from InfoCubes
Whereas Technical content provides following:
0TCT_C03     Data Manager Statistics (Details)
0TCT_C22     DTP Statistics
0TCT_C01     Front End and OLAP Statistics (Aggregated)
0TCT_C02     Front End and OLAP Statistics (Details)
0TCT_C23     Infopackage Statistics
0TCT_C21     Process Chain Statistics
Please advice
Regards
Pankaj

Thanks...
but in the following link of 7.0 saphelp, it still shows the BW statistics cube 0BWTC* and so is the confusion whether to use 0BWTC* also aprt from using 0TCT*
http://help.sap.com/saphelp_nw70/helpdata/en/44/10cb9a8f345cf9e10000000a155369/frameset.htm
Regards
Pankaj

Aggregates on Technical Content

Hi Guru's,
I have installed the Technical Content Cube ( 0BWTC_C05) ,which is for ware house performance monitoring, Now I have to create a process chain to load data into this Infocube. As we are not using the Multiprovider,we cant have the standard queries on this cube. I have created a Query to get the data necessary . I want to create an aggregate for this infocube . How to manage this in the process chain ,and My doubt is if we create the aggr in Dev system, will this be carried to QA system and prd ?? I will be really Glad if any of you can send me the PC Chain used to load this Infocube, as I am not sure what process to include .
Thanks,
Krish

Hi Krish,
You can transport the aggregates created in Dev to QA and Prod boxes. Also most of the projects do allow the creation of aggregates in Prod/QA also so you can create the aggregates there.
The load steps for 0BWTC_C05 would be like this:
1. Load all the attribute/text associated with the cube 0BWTC_C05.
2. Aplly Hier/Attr Change.
3. Load the data for 0BWTC_C05.
Bye
Dinesh

Technical content for the BI statistics

Hi Guru's
What is technical content for the BI statistics and where do I find this???
I want to know what is the procedure to know which query is mostly executed in the system and by how many users.
Thanks & Regards.

Hi,
What is technical content for the BI statistics and where do I find this???
you can enable this facility
go to RSA1> tools >bw statistics>here we have two options like OLAP,WHM ,if you chk OLAP for the respective cube,now it will display all the related infromation i.e all the details of the queries pertaining to the cube
WHM will store all related data staging related information
want to know what is the procedure to know which query is mostly executed in the system and by how many users
the below cubes will meet your requirement
0BWTC_C10_Q011 OLAP Use per User
0BWTC_C10_Q506 OLAP Use per User (Total Number of Records)
0BWTC_C10_Q505 OLAP Use per User (Total Time)
0BWTC_C10_Q503 OLAP Use per User (Time)
chk the below link
http://help.sap.com/saphelp_nw04/helpdata/en/88/3e1f3b5839e10fe10000000a114084/content.htm
Once you install technical content you can use the features of BW statistics etc..
Cheers,
Swapna.G

Testing BW Statistics (Technical Content)

Hello ever one,
need some help in testing BW Statistics.
I have install all standard 6 cube and 1 multiprovider in Dev.
Every thing went fine,I am facing problem in testing,
as i am comparing BW Statistics Report out come with
BW objects (such as Cube/ODS-records/deleted records)
which are no where matching with BW Statistics report.
Is their any specific setting i have missed out coz of this
its not giving correct report ?
or some thing else need to be done for testing.
please let me know.
Thanks & Regards.

MWM,
Is this with respect to :
1. Requests being deleted ?
2. Selective deletion ?
Also what is the nature of mismatch - the records do not tally ?
2. There are no records in statistics ?
Try refreshing stats for the cubes and then reload technical content once again.. also check the same in table RSDDSTAT.
Arun

How to create a copy cube from Business content statistics cube

Dear Experts,
I got a requirement to create the new cubes which is a copy of Business content statistics cubes.
Request you to let me know how can i create a copy cube from Business content cube. My doubt is,weather is't the same as normal customized cube creation by giving copy from option.....
Thanks in advance for your valuable assistance.
Regards,
Ramesh - Kumar.

for copying the cube whose copy is to be made should be available in infoprovider tab in modelling of RSA1.
first you have to install the business content cube ,so that it is found in the Info-providers tab in modelling .
for that,first go to business content option found in the modelling tab of t-code RSA1 .
find the cube and transfer it to the right and execute . It will be available in infoprovider tab of modelling .
then you can create a copy as we do normally .

Statistics technical content activation issue with MD process chain in BI7

Hi,
Let me give you history of the issue first.
I had to activate the Statistics in BI7. I followed the SAP Note 965386 and activated the Technical Content.
Faced activation issues in MD process chain, Content Master Data-0TCT_MD_C_FULL_P01. It dint get activated, Followed the SAP note 1065919, which asked me to remove the below process from RSPC and activate it.
Load data- Process Variant Attribute and
Load data- Process Variant Text.
I did the same and it got activated after removing them.
Issue is. Later knew that manually activating the Process chain from Content would have activated those Infopackages aswell.
Now how should I get those processes into the chain and activate? Based on your suggestions, I can let you know what all I have been trying to fix it?
Relying on you for solution.
Thanks
Pavan

Thank You Neethika,
I have this issue solved. I replicated the data sources, activated those infoPackages manually and then added those variants into the process chain manually. So my MD chain now has all the necessary process.
Now i need to schedule them and see if it runs with out any errors. I will keep this thread open till i run it to take your help if i get any errors while running them.
Thanks
Pavan

Technical Content and BI statistics

Hi
I am installing Technical content. Here i am not sure which one to install. Under technical content infoarea we have
1.Integrated planning
2. BI trace tool
3. Bex personalization
4. Exchange rates types
But under under business information warehouse, we have BI statistics and under these we have TCT_C01, C02, C03, TCT_V01, V02 and so on.
Here i am not sure which one i need to install, would anyone plz guide me thur this.
Regards
Annie

Any replies??
And also after installing the 0TCT_V01, V02, V03, 0TCT_C01,02,03. from the business content.
In the infopackages in update tab, by default the "initialize delta process" "without data transfer is selected".
So should we run initialize delta process withoudt data transfer first and then run delta?
Regards
Annie

Roles and queries Technical content cube

Dear Experts,
Is anyone aware of any technical content cube that has information about roles and which queries those roles have access to?
ie. I need Roles - Query mapping
I have already looked in to AGR_1251 table but here the direct value is not present. I will have to evaluate the S_RS_COMP and
S_RS_COMp1 authorization objects. Iam looking for another method. So please dont suggest AGR_1251 table.
Thanks,
Kris

Hi Kris,
The way that is there to find out the query - mapping details is already known to you which is the best possible way. But apart from that if you would like to know the roles present in your system then you can simply use the Metadata Repository that is already there and is easily accessible.
1) Just go to the RSA1-> Left hand side bottom -> Metadata Repository -> Click on it or use tcode RSORMDR.
2) You will get list for all the Activated objects in your production system.
3) Locate the Role object from Right hand side.
4) On clicking the Role you will get all the roles that have been created in your system.
If you want the role related to a query then you can simply select the Query object from the metadata repository, you will get list of all queries & further clicking on the query will give you entire details about the query like roles etc.
Also you can use your own method.
You will need to write your own abap to get the details by writing logic which compares the data from both the tables and displays the data accordingly else the best option that is always there is using Metadata Repository.
Thanks

BI Statistics Technical Content Activation Error

I got some errors when activating BI Statistics technical content in SPRO and could not find any information about this error on SDN. I would really appreciate your help.
Thank you.
Tony
Below is part of the error message from job log:
Variant '0PAK_472D695A0ZS3DWVBA4H1OO9A6' of process type 'LOADING' not found in A version
A type "Attribute Change Run" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in the chain
A type "Data Transfer Process" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in the chain
A type "Generate Index" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in the chain
A type "Activate DataStore Object Data" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in th
A type "Data Transfer Process" process has to follow process "Execute InfoPackage" var.0PAK_E8U9KCLMI7HW76ZSYTSL0N7NA in the chain
A type "Generate Index" process has to follow process "Execute InfoPackage" var.0PAK_E8U9KCLMI7HW76ZSYTSL0N7NA in the chain
A type "Data Transfer Process" process has to follow process "Execute InfoPackage" var.0PAK_EAYZPOK7VL8KCD6D6HI3UYUT2 in the chain
A type "Generate Index" process has to follow process "Execute InfoPackage" var.0PAK_EAYZPOK7VL8KCD6D6HI3UYUT2 in the chain
A type "Generate Index" process has to follow process "Execute InfoPackage" var.0PAK_44I75TQHBEZKMPJT67XC0VKQJ in the chain
Version 'M' of chain 0TCT_C0_DELTA_P01 was saved without checking
InfoPackage no longer exists in object version A in table RSLDPIO
Variant '0PAK_472D695A0ZS3DWVBA4H1OO9A6' of process type 'LOADING' not found in A version
A type "Attribute Change Run" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in the chain
Version 'M' of chain 0TCT_C0_DELTA_P01 was saved without checking
Start of Process Chains
ABAP/4 processor: UNCAUGHT_EXCEPTION
Job cancelled

Hi Ramesh,
That's the point. Admin cockpit pops up a message:
"Before you can call the BI Administration Cockpit, the technical content has to be installed and customized."

Impact of transporting some of the Technical Content Cubes

Hi All,
We are on BI 7.0.
We would like move only 5 of the cubes from Technical Content. We activated all the 11 cubes using Standard Report.
Questions:
1. I read in some of the threads Technical Content needs to be activated manually in the target systems...<b> i'm thinking we can transport it</b>.
2. I want to transport only 5 Cubes... <b>i don't think transporting these 5 cubes models without any other is not problem.</b>
Let us know your view.
Thanks inadvance!
Nagesh Ganisetti.

1. I read in some of the threads Technical Content needs to be activated manually in the target systems... YOU CAN ONLY ACTIVATE IN DEV AND TRANSPORT
2. I want to transport only 5 Cubes... YOU CAN COLLECT THE 5 CUBES AND TRANSPORT JUST THEM.
Hope this helps
EmJay
--- Assign points if helpful

BW 3.x technical content and BW 7.0 BI statistics

Dear all,
After we upgarde from BW 3.1 to 7.0 , does the old BW 3.1 technical content still collect data to those 3.1 statistics table? Or , we need to migrate to the new 7.0 BI statistics ?
Thank you,
Jeff

Just find the answer in note 955990

Technical content : aggregate statistics cube info

Similar Messages

Maybe you are looking for