Technical Content BI Stat`s missing Transfer Rules for 0TCT_CA1

Hi,
I installed the new 7.0 technical content and had several glitches. Some are fixed with the new SP16, that we installed.
We are at BI Cont 7.03, patch 8.
There is no business content for the Frontend & OLAP Statistics (highly aggregated) 0TCT_CA1 transfer rules - although the cube and communication structure are there - as well as the virtual and multi cube with a lot of queries etc.
Does anyone have a solution for this?
Thanks!
Kathleen

Hi Kathleen Cooke ,
I am having similar issue now, can you please let me know if you know the solution for the below problem..
I am trying to activate the Business Content for BW Statistics, but the datasource and the  Transfer Rules are missing for the 0TCTPRCSVAR_TEXT and also a couple of BW Statistics objects...
I am on
BI_CONT 703, level 0005, Support Package SAPKIBIIP5
SAP_BW 700, level 0012, Support Package SAPKW70012
Thank You,
Varun.

Similar Messages

  • Error while installing transfer rules for 0PM_C03 from Business content

    Hi All,
    When i try to install the transfer rules for the Infocube 0PM_C03 from the Business Content, i get the following error:
    "Mapping between 2LIS_17_I3HDR  2LIS_17_ORDER is inconsistent".
    Here 2LIS_17_ORDER is the Infosource, and 2LIS_17_I3HDR  is the datasource.
    Also, kindly let me know how can the Infosource and the datasource have different names, like in the case for this Cube.
    Kindly help...

    Hi,
    The datasource and infosource can have different names no issue with that.
    and while selecting transfer rule for installing find with '2LIS_17_I3HDR'.
    Regards,
    Rathy

  • How can I activate the transfer rules for the ODS updating a data target.

    We are on BW 3.5 and I'm loading data into the 0FIGL_O10 ODS  and then uploading the data into the cube 0FIGL_C10. The data loads just fine to the ODS but when I try to <u><b>'update the data target'</b></u> I get a date & time stamp' error on the info-package transfer rules.
    I then Replicate the datasource 80FIGL_O01.
    I must then <u><b>'activate' the transfer rules</b></u>.
    However I cannot get the transfer rules for 80FIGL_O10 in CHANGE MODE to activate them.
    How can I activate the transfer rules for the ODS updating a data target.
    The error text is as follows:
    DataSource 80FIGL_O10 has to be replicated (time stamp, see long text)
    Message no. R3016
    Diagnosis
    DataSource 80FIGL_O10 does not have the same status as the source system in the Business Information Warehouse.
    The time stamp in the source system is 02/15/2007 10:42:33.
    The time stamp in the BW system is 11/07/2006 13:11:54.
    System response
    The load process has been terminated.
    <b>Procedure
    Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.</b>
    Thanks for your assistance.
    Denny

    Hi Dennis,
           Try, using Business Content to activate your data source
           hope this will help you
    How activate business content?
    http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm

  • No transfer rules for FI master data sources

    Hi all
    I didnt get transfer rules for some of the FI master datasources.
    0GLACCEXT_T011_HIER
    0NEG_POSTNG_TEXT
    0ITEMSELFLG_TEXT
    When I right click on datasource->create transfer rules->Only other option is enabled.WHen I say continue I am getting this error
    *Infosource(transaction data) is not known.
    How to resolve this isssue.
    Thanks.

    Double click on the data source and go to edit mode, system automatically provides the corresponding BI content infosources if  any and install the same.
    Not all the fields will be mapped with BI info objects.  Only necessary ones as defined in BI content will be available for you.
    If you feel the mapping is incomplete you can modify the same according to the requirement.
    Hope this helps.
    Regards,
    Rangz

  • Transfer Rules for two Source System in Production

    Hi All,
    I have a question.
    I have source system ECDCLNT230 (ECC Devlopment) which is connected to BIDCLNT200(BID Devlopment) I have two production source system ECPCLNT410 (ECP Pre Production Client) & ECPCLNT400 (ECP Production Client) which i want to connect with BIPCLNT400. when i transport my content from ECDCLNT230 to ECPCLNT410 and ECPCLNT400 , it works fine. i created 2 source system in BIPCLNT400 and replicated data source in to BIPCLNT400 so all data source has replicated.
    Now when i transport the request from BIDCLNT200 to BIPCLNT400, i need two transfer rules, two transformation one for each source system. for that what kind of settings are required.
    Thanks is advance.
    Regards,
    Komik Shah

    Hi,
    If I understand correctly, in your BW Production system, you want to connect / load data from your ECC Pre Production and Production system.
    In this case, to automate the transport needed for changes of transfer rules for both source system, you will need to have two tranfer rules in your BW Dev. You can either create two source system in Dev pointing to the same ECC Dev system, or one to ECC Dev and the second to ECC QA. Use different name for this two source system.
    In BW Production, you then then maintain the source system conversion of both source system.
    Thanks.

  • Transfer rules for  Functional Location hierarchy

    Hi
    I am trying to install Transfer rules for 0FUNC_LOC_HIER from BI Content.
    But i could not find any .
    Where do i can find T/Rs or Is there any procedure for that ?
    Regards
    sateesh

    Hi Sateesh,
    I am not sure if the hierarchy datasource 0FUNC_LOC_HIER supports the transfer methog PSA,
    if it only supports IDoc then its will not have transfer rules that you can maintain. You can
    check in table ROOSOURCE in the source system (field transfer method) to see if the datasource supports
    PSA transfer methd. If it does then you could create your own transfer rules.
    Best Regards,
    Des

  • How to refer field of DataSource in transfer rule for DSO object  in BI 7.0

    hello Gurus,
    I am new to BI 7.
    pls tellme how to refer field of DataSource in transfer rule for DSO object.
    I will assign points to proper answer.
    Praveen.

    hi praveen,
    when u create the transformation for the DSO, it asks for the source. in that you enter your datasource, then you get the datasource fields on one side and the rules in the middle and the DSO objects on the other side. whichever field of DataSource you want to refer in tranformation rule, just connect that field to the rule for the required object of the DSO.
    hope this will help you.
    regards
    vaibhav

  • Error in creating RSDS using transfer rules for master data datasources

    Hi ,
    when i am creating the transfermations(RSDS) using transfer rules for master data datasources while i want to migrate datasource.it is giving the error message saying that INITIAL ERROR OCCURED DURING GENERATION OF THE TRANSFERMATION.AND in the taskbar it is giving the message LOG IS BEING LOADED.
    MY QUESTION IS HOW CAN WE SEE THE LOG? AND
    PLEASE GIVE ME THE STEPS TO MIGRATE MASTER DATASOURCES.
    THANKS IN ADVANCE .

    Hi Ankit,
                  Yoy have to load data to the cube.For that you need update rules.
    Steps to load data to the cube
    1.Replicate the datasource.
    2.Assign Infosource
    3.Create transfer rules
    4.Maintain the update rules to the cube.
    5.Right click on the datasource and schedule an infopackage for it.
    Execute the Infopackage and pull the data to the cube.
    Hope this helps
    Regards
    Karthik

  • Strat routine code in transfer rules for the Extractor - 0CO_OM_CCA_1

    Dear SDNers,
    I have a scenario to implement a start rouine code in the transfer rulesfor the Extractor - 0CO_OM_CCA_1 , please give a light on this.
    Scenario:
    The extractor 0C0_OM_CCA_1 brings in Cost Center transactional data for costs and allocation into the SAP BI data warehouse. A cross reference table will be created in SAP BI for Profit Center. These tables will have CRM (CARDIAC RHYTHM MANAGEMENT) Profit Centers stored in them.
    In the transfer rules for 0CO_OM_CCA_1, add ABAP code in the start routine to block CRM (CARDIAC RHYTHM MANAGEMENT) data. The code will have the following logic:
    Check Cost center master data table u2018/BI0/QCOSTCENTERu2019
    This table u2018/BI0/QCOSTCENTERu2019 being time dependent, use the last day of the fiscal period from transactional data as the date to select from u2018/BI0/QCOSTCENTERu2019.
    Go to the Profit center reference table and identify if the data belongs to BSC Boston Scientific/CRM (CARDIAC RHYTHM MANAGEMENT).
    Block CRM (CARDIAC RHYTHM MANAGEMENT) data.
    Best Regards,
    Satya
    Edited by: satya prasad on Sep 8, 2009 8:16 AM

    You could give this a try:
    DATA: wa_qcostcenter TYPE /bi0/qcostcenter,
          wa_ppcxref TYPE /bic/ppcxref,       "Custom Profit Center Cross-Reference table
          l_tabix TYPE sy-tabix,
          l_last_date TYPE d.
    LOOP AT data_package.
      l_tabix = sy-tabix.
      CALL FUNCTION
        'LAST_DAY_IN_PERIOD_GET'
      EXPORTING
        i_gjahr = data_package-fiscper+0(4)
        i_periv = data_package-fiscvarnt
        i_poper = data_package-fiscper+4(3)
      IMPORTING
        e_date = l_last_date.
      SELECT SINGLE
      FROM
        /bi0/qcostcenter
      INTO
        wa_qcostcenter
      WHERE
        costcenter = data_package-kostl
        AND dateto <= l_last_date
        AND datefrom >= l_last_date.
      IF sy-subrc EQ 0.
        SELECT
        FROM
          /bic/ppcxref
        INTO
          wa_ppcxref
        WHERE
          profit_ctr = wa_qcostcenter-profit_ctr.
        IF sy-subrc EQ 0.
          IF wa_ppcxref-data = 'CRM'.
            DELETE
              data_package
            INDEX
              l_tabix.
          ENDIF.
        ENDIF.
    ENDLOOP.
    Edited by: Dennis Scoville on Sep 8, 2009 4:32 PM

  • Activating transfer rules for new source system

    Hi
    we are having 2 R/3 source system in BI. I had activated all the transfer rules with the first source system and now i have created a new source sytem connecting to a different R/3 client. I tried to change the transfer rules point to the new source system using the program RS_TRANSTRU_ACTIVATE_ALL giving the new source system and the infosource name. But i get the error "No Transfer Structure Selected" when i execute the prg.
    how can i change the source system without creating the transfer rules for the new source but use the existing transfer rules and just change the source system assigned to it????
    Regards
    Sujai

    Hi Sujai,
    There are many cases when this program is used.
    When the Trans rules get de-activated due to impact,we need to first replicate the data source and activate the TR using this program.This generally occurs during the data loads in prd.
    It does not makes sense to transport it when there r no changes done to the TR.So simply,u can use this program to activate.
    If the program does not work,then you are left with the transport option.
    Thanks & Regards,
    Suchitra.V

  • Error in Transfer rules for 0REQESTER

    Hi,
    I have a routine in transfer rules for standard Infosource 2LIS_02_ITM for 0REQESTER.
    routine goes like this
    INCLUDE rsbctbbp_transfer_r3.
    TABLES: srm_proj_contr.
    DATA:   l_s_errorlog TYPE rssm_s_errorlog_int,
              l_text TYPE string.
    data: l_rc type i.
    perform bbp_get_requester using TRAN_STRUCTURE-afnam
                                      RECORD_NO
                                      g_s_minfo
                                 changing RESULT
                                     g_t_errorlog
                                      l_rc.
    returncode <> 0 means skip this record
      RETURNCODE = l_rc.
    abort <> 0 means skip whole data package !!!
      ABORT = 0.
    ENDFORM.
    FORM INVERT_REQUESTER
      USING    I_RT_CHAVL_CS      TYPE RSARC_RT_CHAVL
               I_THX_SELECTION_CS TYPE RSARC_THX_SELCS
      CHANGING C_T_SELECTION      TYPE SBIWA_T_SELECT
               E_EXACT            TYPE RS_BOOL.
    $$ begin of inverse routine - insert your code only below this line-
      DATA:
        L_S_SELECTION LIKE LINE OF C_T_SELECTION.
    An empty selection means all values
      CLEAR C_T_SELECTION.
      L_S_SELECTION-FIELDNM = 'AFNAM'.
    Selection of all values may be not exact
      E_EXACT = RS_C_FALSE.
    $$ end of inverse routine - insert your code only before this line -
    ENDFORM.
    this routine does not have any errors.
    when i load the data data wil not be loaded and i will get the following error messege in details
    Record 1 :No value found for attribute 0REQESTER for InfoObject 0USERNAME =
    can anybody suggest me plz regarading this.
    Thanks & Regards,
    Vijaya

    Thanks!

  • Not getting transfer rules for 2LIS_02_HDR , 2LIS_02_ITM and 2LIS_02_SCL

    Hello Bi experts,
    Actually i am implementing standard Purchasing module in BI system.
    While implementing , i have installed cube 0PUR_C04 with data flow before options.
    After installation , i am not getting transfer rule for 2LIS_02_HDR , 2LIS_02_ITM and 2LIS_02_SCL .
    I am getting transfer rule for 2LIS_02_S011 only.
    0PUR_c04 contains these 4 dataspurces - 2LIS_02_HDR , 2LIS_02_ITM and 2LIS_02_SCL , 2LIS_02_S011 .
    So how can i get these transfer rule. and if we want to implement std Purchasing module in BI , which Cubes are required or necessary.
    In metadata repository also , for Cube 0PUR_c04 , it does not showing transfer rule HDR/ITM/SCL. there also it is now showing transfer rules.
    I will be also very thankful if anybody just give me overview of purchasing.
    Thanks,
    Sada.

    Hello Mani,
    Thanks a lot.you are the first one who has answered my que. which i expect .
    Look at following floe in infoprovider in my system. and please tell me what exactly i should do?
    Cube->Purchasing Groups                                                                                0PUR_C04
               Update Rule->0PUR_C04 2LIS_02_HDR                                                                       AY0XVMCJPXXXXXXXXXXXXXXXX
                                    Infosource->Purchasing Data (Document Header Level) as of 2.0B      2LIS_02_HDR
               Update Rule->0PUR_C04 2LIS_02_ITM                                                                         4YSO2PF9XXXXXXXXXXXXXXXXX
                                     INfosource->Purchasing Data (Document Item Level) as of 2.0B          2LIS_02_ITM
               Update Rule->0PUR_C04 2LIS_02_S011                                                                      CSB3FHGQXXXXXXXXXXXXXXXXX
                                     Infosurce->Purchasing groups                                                               2LIS_02_S011
                                                      Transfer Rule->from 2LIS_02_S011 for SC4 Client 600        2LIS_02_S011                  SCXCLNTXXX
                                                                             Datasource->Purchasing groups                    2LIS_02_S011
               Update Rule->0PUR_C04 2LIS_02_SCL                                                                        4ZZ0DMZXXXXXXXXXXXXXXXXXX
                                     Infosource->Pur.Data (Document Schedule Line Level)                         2LIS_02_SCL
    Mani i am expecting answer from you.
    Thanks,
    Sada

  • Transfer Rules for 7.0 Datasource

    Hi All,
    I am trying to create Transfer rules for 7.0 Datasource, but i am not able to see the 7.0 datasource when i try to assign it to infosource, currently i am using DTP(and it works fine), but is there any way to avoid using DTP and use Transfer rules and update rules for 7.0 datasource?
    Thanks,
    Shetty.

    Hi,
    Probably BI7.0 datasouces are migrated so u have to again convert into 3.5 datasource using RSDS transaction.
    If u want to use 3.5 objects (Infosource) then just install in 3.x version then use that for u r transformation and BI7.0 objects let it be there there is no problem with that.
    Thanks,
    Debasish

  • Missing Transfer Rules in Selection Window for Transport

    Hello,
    Can somebody tell me why certain transfer rules are missing in the object selection list of the transport connection window?  I am using BW 3.5.
    Problem details:
    I want to transport a transfer rule from a DEV box to a QA box.  In the transport connection window, I clicked on "select objects" from under transfer rules in the middle panel.  The object listing that followed showed only objects that start with numbers; no object we defined locally that starts with Z was included. 
    I also noticed that this appears to be a "funny" problem.  One other computer connected to BW shows the correct listing while still another shows a different listing.  Has this got to do with any setting? 
    Please help.
    Wernel

    Hi Wernel,
    Its better to activate ur transfer rules once again. Also this Z*  TRs would be displayed in last row of the Pop up window in the select Objects list.
    or select them by grouping as before dataflow by selecting InfoSoruce.
    Assign points if it helps...
    Regards,
    ARK

  • 0Gender Transfer Rules for its Text Datasource Missing

    Dear Experts,
    While checking 0Gender infoobject, I do not see any transfer rules connected to the 0Gender_Text Datasource?
    Within the 0Gender Display in RSD1, I see text data loaded into /BI0/TGENDER table.
    In the Business content activation under any grouping too no transfer rules are present.
    I am on BI 7SP17 and BI Cont 703 SP6.
    Can anyone please help.
    Thanks,
    Raj Jain

    Hi Raj Jain,
    Try the below SAP Note...
    SAP Note Number: 329874:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bct/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d333239383734%7d
    Hope this helps u...
    Regards,
    KK.

Maybe you are looking for