Technical content in BI7...

Hi,
We upgraded to BI7 and now trying to install the Technical content in BI7. I read few forums and im confused.
Right now, we have all 3.x technical content installed, but we are not using them to capture the stats. So we can completely discard them.
I found that we have 2 scenarios in which we can install the Tech content:
1. T-code - RSTCO_ADMIN: When I first logged in to BI system after upgrade, the status in this T-code was 'Not Activated' (RED).When I tried to do it manually again, it still shows the same status and the error message in the app log is:
InfoObject 0TCTUSERNM: You are not authorized to change authorization relevance
Message no. R7B295
Diagnosis
You want to change the authorization relevance for InfoObject 0TCTUSERNM. You do not have the right authorization for making this change.
Procedure
Contact your system administrator. You can find more information in the documentation for authorization object S_RSEC.
The above message is concerned to -TCTUSERNM and we get different messages for diff objects.
I guess we need to have few roles/auth objects added in to my user id to install the Tech content!
2. SPRO
What is the difference between the two.
We are in SP17 and does installing using SPRO effects any of the other objects like 0calyear/0calweek!
We are not on portals, so we dont have to install the Admin Cockpit right!
When we use SPRO-->Activate Technical Content in SAP NetWeaver BI, in the Source system assignment do we need to go for just BWMYSELF are even the R3 systems too!
please suggest.

Hello Ram,
Both paths lead to the same result; You will be taken to the same screen in both events as it is the same program being called.
As for authorization error try adding SAP_BW_BI_ADMINISTRATOR to your roles.

Similar Messages

Activating Technical Content in BI7.0

Hi Experts,
I am trying to activate technical content for BI Statistics and make it work. I have not used RSTCO_ADMIN (we will not need BI Admin Cockpit for now, ST03 would make it at the moment) but went the good old way, activated all the cubes, process chains, etc. from RSA1.
Now everything looks to be more or less OK, except the Process Chains. The problem is that those infopackages in the standard process chains do not exist, and I cannot even find them in the Business Content either. Additionally, 6 of the 7 process chains in transaction RSPC look like "inactive", their names are displayed with grey instead of black. I have to double click on their name and then click on "Display/Change" to make them appear on the right-hand side of the screen.
We are on SAP_BW release 700 SP12, BI_CONT release 703, level 0000. Do you have any idea on why I cannot find those infopackages anywhere in the BI content?
Thanks in advance for any tips,
Csaba

Hi Dhanya,
Thanks for your reply.
When activating the process chain, I have selected all infopackages that were collected automatically by the system (with the option "In the Data Flow Before"). I also tried to find these infopackages myself in the Business Content (in ISIP (Infopackage) object type), still no success.
I also thought I could create these infopackages manually, but I have absolutely no idea on what they are expected to do: loading? From where to where? Activating data? Changing attributes? I don't know.
In RSPC I can see these infopackages as a step in the chain, but only with their technical name which does not help me to find out what is the source and target of that loading.
Cheers,
Csaba

Activating technical content

Hello guru's
I want to activate the technical content in BI7 environment.can u advice the procedure to activate.my dought is what is the differeance b/w activationg through SPRO and directly in business content <object types<roles<technical content.

hi,
u can also use tcode - RSORBCT.
RSA1 - BICONTENT
regards,
md zubair sha

Statistics technical content activation issue with MD process chain in BI7

Hi,
Let me give you history of the issue first.
I had to activate the Statistics in BI7. I followed the SAP Note 965386 and activated the Technical Content.
Faced activation issues in MD process chain, Content Master Data-0TCT_MD_C_FULL_P01. It dint get activated, Followed the SAP note 1065919, which asked me to remove the below process from RSPC and activate it.
Load data- Process Variant Attribute and
Load data- Process Variant Text.
I did the same and it got activated after removing them.
Issue is. Later knew that manually activating the Process chain from Content would have activated those Infopackages aswell.
Now how should I get those processes into the chain and activate? Based on your suggestions, I can let you know what all I have been trying to fix it?
Relying on you for solution.
Thanks
Pavan

Thank You Neethika,
I have this issue solved. I replicated the data sources, activated those infoPackages manually and then added those variants into the process chain manually. So my MD chain now has all the necessary process.
Now i need to schedule them and see if it runs with out any errors. I will keep this thread open till i run it to take your help if i get any errors while running them.
Thanks
Pavan

Question Related to Source System of BI7 Technical Content

Hi Experts,
I activated BI7 Technical contents using SPRO Transaction.
Activation is successfull.
My question is that I could now find two source systems for
each activated Datasource of Technical Content(One BI self source system and another R3 source system).Is that right?
I thought that BI statistics wil be based on only BI as a
source system.
Please help me in this.
Thanks,
Senoy
Edited by: senoy laxman on Aug 19, 2008 3:29 PM

This is because, before actiavtion of technical content, those TWO source systems were already assigned (Check Boxes 'ON')...under
RSA1 --> Business Content --> 'EDIT" menu --> Source System Assignment --> see those check boxes 'ON' for BI self source system and R3 source system.
U r right..BI statistics wil be based on only BI as a source system.

Technical Content Activation Failed in BI7

Dear experts,
Basically, I have posted this question in another category but the response is very disappointing. So I though of moving the question to here.
I am using SAPKW70015 i.e. Release 15. I tried to activate Technical Content via SPRO's Activate Technical Content in SAP NetWeaver BI.
However, I am facing with these problems:
1. If I choose only Activate SAPI DataSources, I will get a time out.
2. If I choose only Activate Technical Content, I will get the following error message:
Runtime Errors UNCAUGHT_EXCEPTION
Exception CX_RS_VERSION_NOT_FOUND
Date and Time 23.07.2008 09:38:27
Short text
An exception occurred that was not caught.
What happened?
The exception 'CX_RS_VERSION_NOT_FOUND' was raised, but it was not caught
anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_RSSM_LOADING===============CP' has to be
terminated.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_RS_VERSION_NOT_FOUND', was not
caught in
procedure "CHANGE_VARIANT" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
Object could not be found in version
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_RS_VERSION_NOT_FOUND"
"CL_RSSM_LOADING===============CP" or "CL_RSSM_LOADING===============CM00G"
"IF_RSPC_TRANSPORT~KEY_CHANGE"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"CHANGE_VARIANT" "(METHOD)", or its possible occurrence must be declared in the
RAISING clause of the procedure.
To prevent the exception, note the following:
Can someone help to me solve both problems???Thanks!!

Hi,
Aks your Basis person to look into the dump in tcode ST22. Also you can check in the SAP notes for error message displayed in the dump. There you find the correction notes.
Mostly this problem is related to Service packs.
Regards,
Sreenivas.

Technical Content(Statistics)

Hi,
Previously I installed the BI statistics manually (not over SPRO). During the activation the system created datasources in all conected systems like R/3 dev. system. Also the activated process chains include the delta loads from these R/3 based datasources.
My doubt is, the existing dataload steps in the process chains might be wrong. Can anyone tell me which datasources should be used from R3 side and which should be the BW based?
The process chains I mentioned are:
Content Master Data
System Master Data
Data Load Statistics - Delta
Load Statictics Data Delta
Query Runtime Statistics - Delta
Thanks
Senoy

Senoy,
Statistics load from BW only. Not from R/3. all data sources are from BW only.
Please check:
[BI7: Administration Cockpit Technical Content BI Statistics|http://sapbwneelam.blogspot.com/2008/10/administration-cockpit-technical.html]
[BW 3.5: How to setup bw statistics|https://www.box.net/shared/us1b13ijq2]
Hope it Helps
Srini
[Dont forget to close the call by assigning poings.... - Food for Points: Make a Difference through Community Contribution!|https://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/007928c5-c4ef-2a10-d9a3-8109ae621a82]

Technical Content

we have just finish the BI7 ugprade.
When I run RSA1 (for the first time), it says the job BI_TCO_ACTIVATION is schedule and run in the background. I check on the website site and it says this Job will activate the Technical Content.
1) Question is why it automatically activate the Technical Content?
2) I thought it is up to us to decide if we want to install and activate the Technical Content from RSA1 ->Business Content?
3) Now the job is finished and it seems like some of the Technical Content have been activated a appear in RSA1.
4) Can I just delete them from the RSA1?
What should I do?
Please help.

BI_TCO_ACTIVATION automatically install the technical contents when you execute RSA1 tcode for the first time after system upgrade.
Technical contents consists of objects related to BI statistics, distributed statistics records etc. Which are different than the business content which we installs manually.
The technical BI Content must be installed or activated. The technical Content is installed automatically in the background (job name BI_TCO_ACTIVATION) when you execute RSA1 for the first time. For the other installations, you should wait until the job BI_TCO_ACTIVATION is completed. (OSS NOTE 979581)
You can have a look at OSS note 979581.

Datasources Missing when Installing Technical Content for BI Admin Cockpit

Hi,
I have installed the Technical Content for BI Admin Cockpit in our QA systems, for BI7, using SPRO, and it seems that there are some missing datasources, transfer rules, etc.,
The one's that are missing are:
=> 0TCTPRCSVAR_TEXT
=> 0TCTPRCSVAR_ATTR
=> 0TCTBWOBJCT_TEXT
=> 0TCTBWOBJCT_ATTR
Does anyone know if this is a known issue, that these are not available?
Please let me know if they're required, and if there's a fix to get them back.
Thanks,
John

Hi John,
In my system the symptom is the same. So I just installed them myself in RSA1->BI Content.
I don't think it's a big problem because the queries on the MultiProviders can run without these master data. For example, you may find the text of query is missing but you can see query's technical name.
I remember when I activate 0TCTBWOBJCT_TEXT and 0TCTPRCSVAR_TEXT, these datasources are in BI 7 version but there's no transformation. So I create myself.
Please let us know if you have other questions.
Regards,
Frank

How can i use Bi-Technical Content is used for measuring the performance of

Hi
recenetly i implemented the BI7.0 for one client. I want to know how to use 'BI Administraction Cockpit,.
Actual what technical content does ???
And how can i use technical content or statistics for measuring the performance of my queries. Please let me know
kumar

Hi Ravi,
BI Admin Cockpit is enhancement of BW Statistics.
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/08a75d19e32d2fe10000000a11466f/frameset.htm
Check this thread also:
BI Statistics comparision with the old
Regarding the performance check the link below.
Re: Query - Performance
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/15c54048035a39e10000000a422035/frameset.htm
Regards,
Anil

BI Technical Content in BI 7.0

Hi Experts,
Could any one help me in installing the BI Technical content in BI 7.0.
Please give me step by step procedure and tell me which are the Infocubes and Multiproviders i need to install.
Thanks,
Mansi.........

Hi,
please go through on below mention steps:
1.     In the administrator workbench, click the Business     Content bar on the left side and then click to set the default source systems.
2. The default source systems are displayed. Click to accept them &       continue. Double click Object Types.
1.     Click     and then select the collect automatically option i.e., BW will collect related objects for the infoproviders to be selected.
       4.   Click     and select the in dataflow before and afterwards             option. Now the infoobject & the object on which the infoobject depends will   be collected and activated together.
        5. Now we will select a Business content object and activate it. Click Select                objects under Infocubes to locate the required infocubes.
       6. Select the required infoobjects and then click
           Now the selected infocubes along with the respective infoobjects will be              transferred for installation.
       7. Click install and then select install to activate the selected infoobject and the              associated objects.
       8. The install in background option can be used when activating a large object.

Unused queries & Technical Content

Hi folks,
I need to find out the unused queries (e.g. the ones that weren't used in last 13 months). As far as I know the best way is to use the technical content (0BWTC_C10); but unfortunately it's not active in our system at the moment.
Another option is, using the "Last Used" field of RSZCOMPDIR. We have another "but" here. I've figured out that this field is updated even though a query is opened in query designer.
My questions are:
1. Any ideas for defining such queries in this situation?
2. What are the disadvantages of using this technical content? (I mean the extra work load at server-side.)
Thanks.

hi pekcan,
you can run transaction rszdelete to get a list of all queries not used for a defined time.
Unused/unnecessary Queries can lead to higher times in the 'Open' &#56256;&#56526; 'Query' dialog. They also cause an unnecessary allocation of disk space.
Check regularly whether queries are really still in use. The 'Last Used' field in transaction RSZDELETE (Delete Objects) is related to table RSZCOMPDIR. 'Last Used' is updated in table RSZCOMPDIR with the exact timestamp of when queries are executed with the BEx Analyzer or Web Frontend.
to get some idea regarding technical content, use the links.
http://help.sap.com/saphelp_nw70/helpdata/en/f2/e81c3b85e6e939e10000000a11402f/frameset.htm
with hopes,
Raja singh

Error while trying to access data from virtual provider - Technical Content

Hi,
I am trying to install the new BI 2004s technical content. I am done with the installation I am trying to display data for the remote cubes delivered i.e. 0TCT_VC11/21 etc. but getting an error:
Error reading the data of InfoProvider 0TCT_VC11
There is still no data source assigned to VirtualProvider 0TCT_VC11
The virtual providers are of type "virtual provider based on DTP" since standard technical content didnt have any DTPs for the VC cubes I tried to create some direct access DTPs based on datasources 0TCT_DS11 but there also getting error:
Source doesnt support direct access
I saw the type for datasource 0TCT_DS11 and its using SAP SAPI and not direct access and couldnt change the type actually the same datasource is also used by cube 0TCT_C11 so changing the type probably wouldnt have been a good idea.
I found the following notes 996735 and implemented its change...but no use...
we are on SP10 and content 7.03 SP2. Can anybody please help??

Hi all,
The above mentioned solution is a good idea but in this context not appropriate as it aims at resolving an issue in the delivered Content Version of 0TCT_VC11.
In your case, you already have 0TCT_VC11 activated and you can not read any data from this VirtualProvider in queries. Right?
In that case, you have to:
1. Check that the entire data flow is active for the InfoProvider (activation should occur for the MYSELF source system): 0TCT_VC11 with InfoSource 0TCT_IS11 with DataSource 0TCT_DS11
2. Activate the direct access for the VirtualProvider (Context menu of 0TCT_VC_11 > Activate Direct Access > Source Syst. for InfoSource3.x > Mark the column with the MYSELF source system and Save).
This corresponds to Installation "Step 5.) Activate direct access for virtual providers" that is mentioned in SAP Note 934848 "Collective note: (FAQ) BI Administration Cockpit".
Best regards,
Rudolf Hennecke
SAP NetWeaver RIG BI

Slow Moving Item Scenario - Technical content for Queries

Hello
Due to preparations for upgrade to BW 7.30 we would make an analysis of not or seldom used BEx reports (queries, workbooks, etc.)
All of unused objects should be deleted in advance of an upgrade.
I checked if there is a query which shows slow moving items for queries.
Is there any technical content (query) which reports this scenario for BEx objects?
Thanks for any advise.

follow steps in this doc:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/11291595-0501-0010-c881-e02c27261b55

Error in transports of BI technical content

Hi ,
While transporting BI technical content , we are getting an error 'Program terminated (job: RDDEXECL, no.: 10524800)'
It also giving a dump as follows:
SAPSQL_ARRAY_INSERT_DUPREC
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
     in
    procedure "RSZ_P_DB_ELT_SET_IMMEDIATELY" "(FUNCTION)", nor was it propagated by
     a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    If you use an ABAP/4 Open SQL array insert to insert a record in
    the database and that record already exists with the same key,
    this results in a termination.
    (With an ABAP/4 Open SQL single record insert in the same error
    situation, processing does not terminate, but SY-SUBRC is set to 4.)
Kindly advice how this issue can be resolved .

Hi,
When you have the transport request under the tranport queue of the destination System and click to truck to import appear a windows with some tabs, in the last tab appear some checkboxes with diferent options, there are some that talk to overwrite the existing objets, and other talk abou repair. Click this ans try to import.
Sometimes work.
Regards,
Dani

Technical content in BI7...

Similar Messages

Maybe you are looking for