Technical content infocubes

Hi All,
Anyone having Of IDEA on Technical content infocubes .When can we use this infocubes ,.How can we search Technical Content infocubes in Business content .
Thanks,
Praveen Yagna

See online docu for this topic:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/44/08a75d19e32d2fe10000000a11466f/content.htm

Similar Messages

Technical content in NW04s

As I understand the technical content infocubes provided in NW04s are named 0TCT*.
And earlier in NW04 it was 0BW*.
1) Is that right?
2) If yes then is it true that if the infocube is still on NW04 in the NW04s environment then only 0BW* infocubes will be populated with stats( not 0TCT) and likewise for NW04s infocubes the stats will be populated in 0TCT cubes ( not in 0BW*)?
Thanks
Manoj

1. In general, yes.
2. After upgrade to NW04s, only the new cubes will be populated with new data. The previous RSDDSTAT table will no longer be populated with statistics information. It becomes obsolete and is replaced with the new statistics tables.

BI Technical Content datasources not found in Quality after transport

HI All
I am trying to implement BI technical Content for Admin Cockpit. I was able to implement Technical content Infocubes successfully in development box but when I collected the objects and transported to Quality(collected oblects in seperate requests: info objects in one request, datasources in one request, infocubes, transfer rules and updated rules in one request), I am not able to find the datasources in quality in myself sourcesystem even after repication. but the transport for technical content datasources is successfull. The following are the datasources:
       Comment Entry: Released
       DataSource Replica
           0TCT_DS01                     D17CLNT208
           0TCT_DS02                     D17CLNT208
           0TCT_DS03                     D17CLNT208
           0TCT_DS11                     D17CLNT208
           0TCT_DS12                     D17CLNT208
           0TCT_DS21                     D17CLNT208
           0TCT_DS22                     D17CLNT208
           0TCT_DS23                     D17CLNT208
can anyone tell me why I am not able to find the datasources in Quality after successfull transport.
We are on SAP_BW     700   SAPKW70016     SAP NetWeaver BI 7.0.
thanks

thanks for your quick responce. I was not able to collect the datasources so I had to manually input them in the transport request. But it worked.
thanks once again.

BI Technical Content in BI 7.0

Hi Experts,
Could any one help me in installing the BI Technical content in BI 7.0.
Please give me step by step procedure and tell me which are the Infocubes and Multiproviders i need to install.
Thanks,
Mansi.........

Hi,
please go through on below mention steps:
1.     In the administrator workbench, click the Business     Content bar on the left side and then click to set the default source systems.
2. The default source systems are displayed. Click to accept them &       continue. Double click Object Types.
1.     Click     and then select the collect automatically option i.e., BW will collect related objects for the infoproviders to be selected.
       4.   Click     and select the in dataflow before and afterwards             option. Now the infoobject & the object on which the infoobject depends will   be collected and activated together.
        5. Now we will select a Business content object and activate it. Click Select                objects under Infocubes to locate the required infocubes.
       6. Select the required infoobjects and then click
           Now the selected infocubes along with the respective infoobjects will be              transferred for installation.
       7. Click install and then select install to activate the selected infoobject and the              associated objects.
       8. The install in background option can be used when activating a large object.

Aggregates on Technical Content

Hi Guru's,
I have installed the Technical Content Cube ( 0BWTC_C05) ,which is for ware house performance monitoring, Now I have to create a process chain to load data into this Infocube. As we are not using the Multiprovider,we cant have the standard queries on this cube. I have created a Query to get the data necessary . I want to create an aggregate for this infocube . How to manage this in the process chain ,and My doubt is if we create the aggr in Dev system, will this be carried to QA system and prd ?? I will be really Glad if any of you can send me the PC Chain used to load this Infocube, as I am not sure what process to include .
Thanks,
Krish

Hi Krish,
You can transport the aggregates created in Dev to QA and Prod boxes. Also most of the projects do allow the creation of aggregates in Prod/QA also so you can create the aggregates there.
The load steps for 0BWTC_C05 would be like this:
1. Load all the attribute/text associated with the cube 0BWTC_C05.
2. Aplly Hier/Attr Change.
3. Load the data for 0BWTC_C05.
Bye
Dinesh

Technical Content Cube for Multi Provider Information???

Hi all,
Can anyone suggest which Technical Content Cube will give Information about Multi Provider and its underlying Info Providers(Last load tiem of Info Provider)?.
Thanks
Deepika

Hi,
We have tables which gives the information about that, if u want u can create a view on these tables in RSO2 in BW and load the data to the Zcube.
Below are the tables.
RSDCUBE - Directory of InfoCubes
RSDCUBEIOBJ - Objects per InfoCube (where-used list)
RSDDIMEIOBJ -
RSDCUBEMULTI -InfoCubes involved in a MultiCube
RSDICMULTIIOBJ - MultiProvider Selection/ Identification of InfoObjects
Sorry for the post its my misunderstanding....
For bw statistics the above post will help u....
Khaja
Edited by: khaja on Feb 25, 2008 12:46 PM

Technical Content - Query Execution

Hi,
I have recently activated the Technical Content.
How do I identify the number of the times the query has been executed by the user? I found one column 'Number of Navigations' in the BW-Statistics workbook. What is this meant for ?
Thanks
Ramesh Ganji

hi Ramesh,
oss note 130696 -Performance trace in BW-Helps may explain the meaning.
to identify number of times query executed, there is keyfigure 0TCTSTAUIK - frequency,
check if helps business content query 0BWTC_C10_Q021
http://help.sap.com/saphelp_nw2004s/helpdata/en/68/84353cf261303de10000000a11402f/frameset.htm
you can utilize infoobjects OTCTQUERY, 0TCTSTAUIK (frequency), 0TCTUSERNM, 0TCTNAVCTR from multiprovider 0BWTC_C10
most user-run queries
130696 -Performance trace in BW-Helps
Symptom
How can you monitor the performance of a query in BW?
Other terms
Performance, tracing, BW, query, report, time
Solution
1) Activate the saving of statistical data for each InfoCube
-> BW Admin Workbench - Tools -> BW Statistics for Infoproviders ->
Select the "OLAP" field for the InfoCube.
3) Execute report/query
2) Analyze the RSDDSTAT table using Transaction SE16
Access, for example, using the InfoCube name or the user name or the
timestamp
1. Times that are saved:
QTIMEOLAPINIT
Time of the initialization of the query (for example, loading query in OLAP, compiling if required)
QTIMEOLAP
Time that the OLAP processor required
QTIMEDB
Time the database + network required to select the transaction data. The time is measured from when the SQL command is send to the database, and it is stopped when the requested data reaches the application server. This time therefore includes the transport on the network and the selection on the database.
QTIMEVARDP
Time the user required to enter the variables
QTIMEUSER
Time the user required between the navigation steps
QTIMECLIENT
Time of data formatting in the frontend
The time measurment starts when the OLAP processor has completed the data formatting. The data is then sent to the frontend (EXCEL). The time is stopped when the frontend (BW add-in in EXCEL) has inserted all data in the worksheets (writing the contents and formatting cell, if required). The time therefore includes the transport on the network with the RFC connection and the output in the frontend.
TIMECHAVLREAD
Time required to read master data
TIMEAUTHCHECK
Runtime of the authorization check.
TIMEREST
Time that could not be assigned in more detail (should be equal to 0; if this is not the case, something in the internal processing of the OLAP processor occured differently than expected.)
QRUNTIMECATEGORY
Time of a navigation step (QTIMEOLAPINIT + QTIMEOLAP + QTIMEDB + QTIMEEXCEL + QTIMECHAVLREAD) rounded to the next higher scaling (1,10,100,1000 ... seconds). As of 1.2B, this is rounded to 1,2,3, ... 10,20,30,...100,200,300,... seconds.
1. Data regarding the size of the query:
QDBSEL
Number of the records that had to be read on the database
QDBTRANS
Number of records that the database transferred to the server
QNUMCELLS
Number of cells that were transferred to the frontend
QNUMRANGES
Number of formattings that were transferred to the frontend
RECCHAVLREAD
Number of master data records to be read
1. In addition, the following is saved:
QAGGRUSED
Name of the aggregate used
QNACHLESEN
Indicator: Query reads during each navigation step
1. Administrative information
STATUID
Key of the table; link in view RSDDSTAT_V
QSESSION
All data for a call of the frontend (between start and end of the frontend) is compounded with this unique GUID.
QNAVSTEP
The navigation steps of a QSESSION are numbered in ascending order
QNUMOLAPREADS
Number of read operations OLAP processor for each navigation step
HANDLE
In the frontend, each embedded query has a separate, sequential number (handle)
If you want to analyze a certain query, start it and filter the values from the table afterwards: Selection options: infocube, user name, queryid (can be determined in the report monitor (Transaction RSRT)-> Technical information). The STARTTIME (UTC time) tells you whether you have found the correct session.
You can recognize a session because the QSESSION is always assigned the same ID. The sequence of the navigation steps is saved in QNAVSTEP. However, you can also determine it using the STARTTIME.

Technical Content - Delta Initialization

Hi,
While loading the Technical Content data, Do I need to run the Transactions - Delta Initialization infopackages everytime before I run the delta info packages.
Please help.
Thanks
Ramesh Ganji

Hi AHP,
I have executed both with text / without text infopackages for both 0TCTTQUERY & 0TCTQUERID.
I also checked the query by displaying key and name. Is is showing as #.
Post that I checked the Statistics cube. In cube some rows are blank without any query name, infocube name. But the frequency is having the value. May be because of this it is showing in the report.
Thanks
Ramesh Ganji

Technical Content 0TCT_MC23 Monitor Infopackage runtime over a time row

Hello Experts,
I try to make a query on the Multicube 0TCT_MC23.
I want to find out the runtime over several days for an Infopackage loading from source system, e.g. Y_2LIS_13_VDITM to an ODS.
To make it more flexible than the standardqueries I create my on query with some varaibles for source object, target, object and so on.
Now I have some questions:
1. Which calculation should I do for the runtime of the Infopackage in munutes/seconds?
   I would like to see the same time as I see in the monitor for the Infopackage run in the header information,
e.g.    Runtime      40m 12s = 0.28 % of the previo
(The keyfigure: 'End Timestamp' is not corresponding with the information from the Infopackage monitor,
The keyfigure 'Duration' is also not corresponing)
2. I also would like to differentiate the times on the source system and the times on BW system. Therefore I use the characteristic: Trans. type (WHM) 0TCTWHMACT with the content:
000
010      Processing in the Source System
600       InfoCube Reconstruction
900       Total Process
So who can explain me the meaning of this, e.g. the entry 900 (Total process) is the sum of what?
or a documentation link would be helpfull.
Edited by: Eva Haake on Nov 24, 2008 1:27 PM

Hi,
Oh, I'am sorry:
I don't have an actual problem with a step in a process chain.
What I'am going to do is:
Monitor the performance of my daily loading processes.
I just want to have more information about the performance of the steps in my loading process and monitor these steps over several days / weeks.
So some hints for the technical content and especially for 0TCTWHMACT information would be helpfull.
Eva

Actions of the APD logged in the technical content

Hey experts,
I am trying to clean up the bw system. Therefore, I created check queries on the technical content.
I have received a certain result.
I am tempted to delete certain queries, since they were not executed fo ra certain time. After having talked to a collegue, he told me that these queries are used on the analysis process designer (APD).
Can you tell me, if actions of the APD are logged in the technical content or not?
BR
Marcus

Hi,
Search them in following tables if anything is available
Queries
RSZELTDIR
Directory of the reporting component elements
RSZELTTXT Texts of reporting component elements
RSZELTXREF Directory of query element references
RSRREPDIR
Directory of all reports (Query GENUNIID)
RSZCOMPDIR Directory of reporting components
RSZRANGE Selection specification for an element
RSZSELECT
Selection properties of an element
RSZELTDIR
Directory of the reporting component elements
RSZCOMPIC
Assignment reuseable component <-> InfoCube
RSZELTPRIO Priorities with element collisions
RSZELTPROP Element properties (settings)
RSZELTATTR
Attribute selection per dimension element
RSZCALC Definition of a formula element
RSZCEL
Query Designer: Directory of Cells
RSZGLOBV
Global Variables in Reporting
RSZCHANGES Change history of reporting components
Workbooks
RSRWBINDEX List of binary large objects (Excel workbooks)
RSRWBINDEXT
Titles of binary objects (Excel workbooks)
RSRWBSTORE
Storage for binary large objects (Excel workbooks)
RSRWBTEMPLATE
Assignment of Excel workbooks as personal templates
RSRWORKBOOK Where-used list for reports in workbooks
Thanks and regards
Kiran

BW Statistics and Technical Content

HI,
I am working on BI 7.0.
I understand both BW statistics and Technical content are used to monitor the system status to improve performance. But what I dont get is teh exact difference between these two.
BW statistics provides the follwing Dataprovider:
0BWTC_C02     BW Statistics - OLAP
0BWTC_C03     BW Statistics - OLAP, Detail Navigation
0BWTC_C04     BW Statistics - Aggregates
0BWTC_C05     BW Statistics - WHM
0BWTC_C09     BW Statistics: Condensing InfoCubes
0BWTC_C11     BW Statistics: Deleting Data from InfoCubes
Whereas Technical content provides following:
0TCT_C03     Data Manager Statistics (Details)
0TCT_C22     DTP Statistics
0TCT_C01     Front End and OLAP Statistics (Aggregated)
0TCT_C02     Front End and OLAP Statistics (Details)
0TCT_C23     Infopackage Statistics
0TCT_C21     Process Chain Statistics
Please advice
Regards
Pankaj

Thanks...
but in the following link of 7.0 saphelp, it still shows the BW statistics cube 0BWTC* and so is the confusion whether to use 0BWTC* also aprt from using 0TCT*
http://help.sap.com/saphelp_nw70/helpdata/en/44/10cb9a8f345cf9e10000000a155369/frameset.htm
Regards
Pankaj

Unused queries & Technical Content

Hi folks,
I need to find out the unused queries (e.g. the ones that weren't used in last 13 months). As far as I know the best way is to use the technical content (0BWTC_C10); but unfortunately it's not active in our system at the moment.
Another option is, using the "Last Used" field of RSZCOMPDIR. We have another "but" here. I've figured out that this field is updated even though a query is opened in query designer.
My questions are:
1. Any ideas for defining such queries in this situation?
2. What are the disadvantages of using this technical content? (I mean the extra work load at server-side.)
Thanks.

hi pekcan,
you can run transaction rszdelete to get a list of all queries not used for a defined time.
Unused/unnecessary Queries can lead to higher times in the 'Open' &#56256;&#56526; 'Query' dialog. They also cause an unnecessary allocation of disk space.
Check regularly whether queries are really still in use. The 'Last Used' field in transaction RSZDELETE (Delete Objects) is related to table RSZCOMPDIR. 'Last Used' is updated in table RSZCOMPDIR with the exact timestamp of when queries are executed with the BEx Analyzer or Web Frontend.
to get some idea regarding technical content, use the links.
http://help.sap.com/saphelp_nw70/helpdata/en/f2/e81c3b85e6e939e10000000a11402f/frameset.htm
with hopes,
Raja singh

Error in Activating the Business Content Infocube 0CRM_C08

Hi Experts,
when iam trying to activating the business content infocube 0CRM_C08
iam getting few errors
Error-1:- Characteristic 0COUNTY_CDE is still being used as target of transfer rule ZCOUNTY_TEXT
Error-2:- Char. 0CRM_OBTYP3 is exclusively an attribute (cannot be a navigation attribute)
Error-3:- Authorization field CRM_SALORG still being used in authorization objects
Error-4:- Cannot delete authorization field of InfoObject 0CRM_SALORG
Error-5:- InfoObject ZDGTDCODE is used in transfer rules (1CL_OMAT001_BB) of characteristic 0MATERIA
Can anyone please clarify regarding these kind of errors.
What i have to do for make a successfull activation
Thanks in Advance
ARUN

Hi Raj,
I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
ASSIGN_LENGTH_0 " "
SAPLSNR3 or "LSNR3F01"
LOCAL_BUFFER
please treat this as urgent.
Thanks
Prabhakar.

Error while trying to access data from virtual provider - Technical Content

Hi,
I am trying to install the new BI 2004s technical content. I am done with the installation I am trying to display data for the remote cubes delivered i.e. 0TCT_VC11/21 etc. but getting an error:
Error reading the data of InfoProvider 0TCT_VC11
There is still no data source assigned to VirtualProvider 0TCT_VC11
The virtual providers are of type "virtual provider based on DTP" since standard technical content didnt have any DTPs for the VC cubes I tried to create some direct access DTPs based on datasources 0TCT_DS11 but there also getting error:
Source doesnt support direct access
I saw the type for datasource 0TCT_DS11 and its using SAP SAPI and not direct access and couldnt change the type actually the same datasource is also used by cube 0TCT_C11 so changing the type probably wouldnt have been a good idea.
I found the following notes 996735 and implemented its change...but no use...
we are on SP10 and content 7.03 SP2. Can anybody please help??

Hi all,
The above mentioned solution is a good idea but in this context not appropriate as it aims at resolving an issue in the delivered Content Version of 0TCT_VC11.
In your case, you already have 0TCT_VC11 activated and you can not read any data from this VirtualProvider in queries. Right?
In that case, you have to:
1. Check that the entire data flow is active for the InfoProvider (activation should occur for the MYSELF source system): 0TCT_VC11 with InfoSource 0TCT_IS11 with DataSource 0TCT_DS11
2. Activate the direct access for the VirtualProvider (Context menu of 0TCT_VC_11 > Activate Direct Access > Source Syst. for InfoSource3.x > Mark the column with the MYSELF source system and Save).
This corresponds to Installation "Step 5.) Activate direct access for virtual providers" that is mentioned in SAP Note 934848 "Collective note: (FAQ) BI Administration Cockpit".
Best regards,
Rudolf Hennecke
SAP NetWeaver RIG BI

BI content InfoCube missing for reporting and reports show'~' in with KFs

Hello friends,
I need help with the following two issue with the business content query that I have
installed in DEV system.
1. I have installed a BI content infocube and 5 standard
   queries with it, I am able to see and execute the query but some other
   users are not able to see the Infocube listed under Infoarea. The same
   users were able to see the Infocube if they tried creating a new query.
2. When I execute the same installed standard BI content query all the key figures values in columns are shown with a '~' symbol before and after it.
   example: $ 198.63 and -$ 0.02
   How do I over come this ? and what might be the reason ? Please suggest.
Thanks,
SONU.

Hi Sonu,
In Tcode SU01 check roles and profiles for your users.
Then in PFCG check the authorizations for that specific roles you have found in SU01.
Maybe your users have restrictions on query names: maybe they are authorized to execute only query starting with "Z" and BC query start with "0".
Ciao.
Riccardo.
PS: If Bhanu has solved your problem for item 2 I think you have to assign points...

Technical content infocubes

Similar Messages

Maybe you are looking for