Technical content Installation Issue

Hi Gurus,
I am installing Technical content in our development box. I have one thing to be clarified before I go further with the installation job. I have got lots of infoobjects installed in our server eg., 0CALDAY which are again part of the technical content too. I have got some routines working on these infoobjects for some other purpose. If I install the 0CALDAY once again by selecting the Grouping option "data flow before and after" what would be the circuumstances. My question is do I need to do any sort of modifications to the objects where my 0CALDAY is refreenced after activating the Technical Content.
Kindly clarify.
Regards
Visweswara

You shouldn't need to reinstall these objects. You can either uncheck the Install box, or check the Match box and when you install it will stop at these objects, show you the difference, and allow you to take the new version or keep the old version.
Take care not to install in background, because this will automatically overwrite everything you have collected with the new versions, even if you uncheck the Install box.
Bryan

Similar Messages

BI Content Installation issues due to compounding

Hi All,
I am on BW 7.4 and am facing some issues while trying to install a BI content cube.
One of the infoobjects of those cubes has a custom infoobject compounded to it and the BI content installation keeps on failing because the Delivered version of that cube doesnt have that compounded InfoObject.
For example 0COMP_CODE has ZXYZ added in compounding. Now I try to install a cube 0ABC having 0COMP_CODE.
System throws an error that cube 0ABC is missing infoobject ZXYZ and cannot be installed.
How do I get this cube to be installed so that I can manually put ZXYZ in it and activate? Please help.
Regards,
Shyam

Hi,
I think I am not clear on my question.
0COMP_CODE is already present. ZXYZ is already been created and is a custom IO.
ZXYZ had been added in compounding of 0COMP_CODE.
This means that whenever you use 0COMP_CODE in a cube/dso you will have to make sure that ZXYZ is also present. Or else that Infoprovider cannot be activated.
Now the problem is that when I try to install a BI content cube containing 0COMP_CODE system throws an error that ZXYZ is not part of the Infocube (obviously since it is a custom IO) and hence the entire cube installation fails.
Now my question is how do i get the cube to be installed at least in inactive state so that I can add ZXYZ to it and make it active.
Regards,
Shyam

Statistics technical content activation issue with MD process chain in BI7

Hi,
Let me give you history of the issue first.
I had to activate the Statistics in BI7. I followed the SAP Note 965386 and activated the Technical Content.
Faced activation issues in MD process chain, Content Master Data-0TCT_MD_C_FULL_P01. It dint get activated, Followed the SAP note 1065919, which asked me to remove the below process from RSPC and activate it.
Load data- Process Variant Attribute and
Load data- Process Variant Text.
I did the same and it got activated after removing them.
Issue is. Later knew that manually activating the Process chain from Content would have activated those Infopackages aswell.
Now how should I get those processes into the chain and activate? Based on your suggestions, I can let you know what all I have been trying to fix it?
Relying on you for solution.
Thanks
Pavan

Thank You Neethika,
I have this issue solved. I replicated the data sources, activated those infoPackages manually and then added those variants into the process chain manually. So my MD chain now has all the necessary process.
Now i need to schedule them and see if it runs with out any errors. I will keep this thread open till i run it to take your help if i get any errors while running them.
Thanks
Pavan

Windows 8.0 and Windows 10 technical review installation issues and activation message keeps poping up?

My Dell Inspiron E1705 had Windows Vista and I could not install the Windows 10 technical review, so I installed my Windows 8.0 and then I could install the Win10 tech review.So I'm reviewing the Win10 and now I keep getting a pop up screen with Windows
asking to activate so to get ride of the messages popping up every boot up. I am attempting to activate but when I follow the instructions to activate entering the product key from the Windows 8.0 fails. I next select call and provide your installation ID,
this process is you call in and an automated prompt ask for your installation ID, then it gives you some numbers to enter in groups A thru H, but my screen only shows A thru G? My concern is that if I don't activate this windows it will stop and thus
no review of Win10.
Should I be concerned is activation necessary, Do I re-install Win10 and start over, I feel that I may have inadvertently caused the problem when I did the initial installation it ask if I wanted to keep information from the previous installed Windows 8
or install clean? If I don't get any other options/solutions I may just do a clean install?
Thanks in advance for your support.
/Joe

Hi Joe,
So the situation here is you upgrade Windows 8 to Windows 10, and Windows 10 can't be activated?
There is no need to activate Windows 10 in the Technical Preview period, and if you have issue activating Windows, you may try to run:
1. Open Administrative command prompt (Windows key+x > A)
2. Type: SLUI 3
3. Enter the product key listed on the download site.
And if you still get the activation issue, please contact Microsoft local license support team for further assistance.
Get Help Activating Microsoft Windows
Best regards
Michael Shao
TechNet Community Support

Webcenter Content installation issues

Hi,
I am new to Webcenter 11g and i am trying to in stall Webcenter Content.
I followed http://docs.oracle.com/cd/E23943_01/doc.1111/e14538/qiecm.htm#autoId15.
After installation i started the Admin server and i having issues starting the managed servers.
I am getting the below error when starting the UCM_server1. Am i missing something?
Thanks
Ajay
ERROR:
<Aug 21, 2012 4:08:35 PM IST> <Error> <Security> <BEA-090892> <The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-00056: Failed to create identity store service instance idstore.ldap.provider:idstore.ldap. Reason: weblogic.security.service.SecurityServiceRuntimeException: Invalid host or port for admin server..>
<Aug 21, 2012 4:08:35 PM IST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-00056: Failed to create identity store service instance idstore.ldap.provider:idstore.ldap. Reason: weblogic.security.service.SecurityServiceRuntimeException: Invalid host or port for admin server..
weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-00056: Failed to create identity store service instance idstore.ldap.provider:idstore.ldap. Reason: weblogic.security.service.SecurityServiceRuntimeException: Invalid host or port for admin server..
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1398)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsRuntimeException: JPS-00056: Failed to create identity store service instance idstore.ldap.provider:idstore.ldap. Reason: weblogic.security.service.SecurityServiceRuntimeException: Invalid host or port for admin server..
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:167)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:369)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsException: JPS-00056: Failed to create identity store service instance idstore.ldap.provider:idstore.ldap. Reason: weblogic.security.service.SecurityServiceRuntimeException: Invalid host or port for admin server..

Ajay G M wrote: Reason: weblogic.security.service.SecurityServiceRuntimeException: Invalid host or port for admin serverWhen starting the managed server using "startManagedWebLogic", you will provide an admin server address and port as part of the command line argument. The values you provided appear to be incorrect according to the trace.

Business content installation issue

HI all
     when iam   installing 0customer infoobject with nesseary attribute from business content, I cannot find the infoobject 0customer in the modelling.
     after clicking the install button .. the infoobject symbol is still in grey color and showing actuive version..
   please tel me the reason for not showing in the modelling .
Thank you
regards
pradeep

Hi ,
May be these infoobjects may be seen under 'unassigned nodes', when install from business content, you need to collect the infoarea and infoobject catalog also, now try to run function module(SE37)
RSDG_IOBC_REORG
Import parameter Value
I_OBJVERS A
I_PROGRESS
I_IOBJTP *
I_ALL_IOBJ X
I_T_IOBJNM 0 entries
I_BYPASS_BUFFER
F8 -> Execute
SAP Note 573421
Hope this will be expedite
Vaibhave Sharma

Urgent-Issue with Technical Content.

Hi experts,
we have activated the technical content.Now we are Initilize and run deltas with Process Chain.
Under one of the Infosource loading the datatarget(0BWTC_C02),i have the following standard delivered infopackages
1) Delta - OLAP Transaction Data
2) OLAP Transaction Data Initialization
3) OLAP Transaction Data: Delta Initialization
4) Transaction Data OLAP - Delta
5) Transaction Data OLAP - Delta Initialization
I have checked all these infopackages,i dont see any difference when i tried to compare the selection conditions and datatargets.
Now my question is
1) How do i select which infopackage should be in the process chains?
2) Also do we need to create and delete indexes for the technical content cubes too?
Please advise
thanks in advance
kiran

Hi sunil,
I appreciate your reply.
Issue 1:My question was as i have 5 Standard infopackages with no differences.If you see my first posting.How should i consider which infopackage to choose for in my Process Chain?
Ex: As i see 3 Init Infopackages witht he same name.How should choose which onfopackage to include for the process chain?
Also i see 2 delta infopackages witht almost the similar name.How should i consider which infopackage to include for the process chain.
Issue 2: I do understand that indexes are deleted before loading data for better loading performance and then indexes are created for reporting perfomances.
But my question was do we have to create/delete indexes for Technical content too.What is the recommended solution?What are the Pros and Cons?
Hope i am clear with my questions this time.
thanks in advance
kiran

Error while trying to access data from virtual provider - Technical Content

Hi,
I am trying to install the new BI 2004s technical content. I am done with the installation I am trying to display data for the remote cubes delivered i.e. 0TCT_VC11/21 etc. but getting an error:
Error reading the data of InfoProvider 0TCT_VC11
There is still no data source assigned to VirtualProvider 0TCT_VC11
The virtual providers are of type "virtual provider based on DTP" since standard technical content didnt have any DTPs for the VC cubes I tried to create some direct access DTPs based on datasources 0TCT_DS11 but there also getting error:
Source doesnt support direct access
I saw the type for datasource 0TCT_DS11 and its using SAP SAPI and not direct access and couldnt change the type actually the same datasource is also used by cube 0TCT_C11 so changing the type probably wouldnt have been a good idea.
I found the following notes 996735 and implemented its change...but no use...
we are on SP10 and content 7.03 SP2. Can anybody please help??

Hi all,
The above mentioned solution is a good idea but in this context not appropriate as it aims at resolving an issue in the delivered Content Version of 0TCT_VC11.
In your case, you already have 0TCT_VC11 activated and you can not read any data from this VirtualProvider in queries. Right?
In that case, you have to:
1. Check that the entire data flow is active for the InfoProvider (activation should occur for the MYSELF source system): 0TCT_VC11 with InfoSource 0TCT_IS11 with DataSource 0TCT_DS11
2. Activate the direct access for the VirtualProvider (Context menu of 0TCT_VC_11 > Activate Direct Access > Source Syst. for InfoSource3.x > Mark the column with the MYSELF source system and Save).
This corresponds to Installation "Step 5.) Activate direct access for virtual providers" that is mentioned in SAP Note 934848 "Collective note: (FAQ) BI Administration Cockpit".
Best regards,
Rudolf Hennecke
SAP NetWeaver RIG BI

BI Technical Content in BI 7.0

Hi Experts,
Could any one help me in installing the BI Technical content in BI 7.0.
Please give me step by step procedure and tell me which are the Infocubes and Multiproviders i need to install.
Thanks,
Mansi.........

Hi,
please go through on below mention steps:
1.     In the administrator workbench, click the Business     Content bar on the left side and then click to set the default source systems.
2. The default source systems are displayed. Click to accept them &       continue. Double click Object Types.
1.     Click     and then select the collect automatically option i.e., BW will collect related objects for the infoproviders to be selected.
       4.   Click     and select the in dataflow before and afterwards             option. Now the infoobject & the object on which the infoobject depends will   be collected and activated together.
        5. Now we will select a Business content object and activate it. Click Select                objects under Infocubes to locate the required infocubes.
       6. Select the required infoobjects and then click
           Now the selected infocubes along with the respective infoobjects will be              transferred for installation.
       7. Click install and then select install to activate the selected infoobject and the              associated objects.
       8. The install in background option can be used when activating a large object.

Lightroom 4.2 Installation Issue

Leaving this around in case anyone else has the same problem -- Solution found -- Windows installer issues / registry issues -- used the Microsoft Fix it tool (http://support.microsoft.com/kb/2438651#reso3) to correct. 4.2 install ran fine.
I've read through the posts in the Lightroom forum regarding LR 4.2 install issues. I will list here the things I've done to try to get the install to work:
1) Downloaded the installation software twice.
2) Ran the setup program in admin user mode.
3) Ran the install in admin user mode.
4) Get the following error in a Windows Installer window:
The feature you are trying to use is on a network resource that is unavailable.
Click ok to try again, or enter an alternate path to a folder containing the installation package 'Adobe_Lightroom_x64.msi' in the box below.
Use source:
c:\Users\RMJF\AppData\Local\Temp\{...}
What I have found (after displaying hidden AppData folder):
The location where the .msi file resides is different from the one defaulting in the above window.
I select this alternate path, but still cannot complete the installation.
Furthermore, when I cancel the install, I get this error:
Adobe Photoshop Lightroom 4.2 64-bit Installer Info
Error 1714. The older version of Adobe Photoshop Lightoom 4.2 64-bit cannot be removed. Contact your technical support group
I have been running LR since the beginning of time and most recently LR 4.1, so there is no 4.2 installed.
Also, I tried to fix the install of 4.1 via the programs in Control Panel. I cannot repair it and get this error:
The installation source for this product is not available. Verify that the source exists and that you can access it.
All versions (except the 1.0 version) were downloaded and installed from the Adobe LR site.
So, looking for suggestions.
Seems like there are some missing files from the 4.1 version that are hindering the install of 4.2???
All quite frustrating. Hope you can get me to a speedy solution.
(System info: Windows Vista 64-bit Home, SP 2, 20 GB of disk space to spare! Also, I have set the install program to be allowed by the anti-virus program. I have run a registry clean-up, as well. No other apps are running during the install.)
Message was edited by: marzo19

untill now, 3 phones later, and mayby 10 attemps later to install it: notting. the errors that i am gething are the same as above, but nothing helps for me.
even the microsoft fixid diden't help.
So also desperate.

Error in transports of BI technical content

Hi ,
While transporting BI technical content , we are getting an error 'Program terminated (job: RDDEXECL, no.: 10524800)'
It also giving a dump as follows:
SAPSQL_ARRAY_INSERT_DUPREC
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
     in
    procedure "RSZ_P_DB_ELT_SET_IMMEDIATELY" "(FUNCTION)", nor was it propagated by
     a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    If you use an ABAP/4 Open SQL array insert to insert a record in
    the database and that record already exists with the same key,
    this results in a termination.
    (With an ABAP/4 Open SQL single record insert in the same error
    situation, processing does not terminate, but SY-SUBRC is set to 4.)
Kindly advice how this issue can be resolved .

Hi,
When you have the transport request under the tranport queue of the destination System and click to truck to import appear a windows with some tabs, in the last tab appear some checkboxes with diferent options, there are some that talk to overwrite the existing objets, and other talk abou repair. Click this ans try to import.
Sometimes work.
Regards,
Dani

Technical content ** NW 2004s ** Please help

Hi,
When i check the reports of the technical content, i can only see the the Techcnical name of the Info Package.
Even if i choose display as " Key & Text " still unable to see the Ipak descreption in the report.
I have checked old 3.X statistics, i think, its the same issue there aswell.
Please help.
Thanks,
Nisha

Hi Srilatha,
I have applied the SAP Note 1088038 and tried loading 0tctprcsvar_text.
When i have checked in PSA, i can see the descreption of the Ipak.
But, if i maintain the master data and see that, the long descreption is blank.
Its not getting populated.
Please advise.
Thanks,
Nisha

Business Content installation error in Solman

Hi All,
While installing Business Content for the transactional data source "0CRM_SRV_PROCESS_H" in the Solman, I came accross the following error-
"IC=0CRM_PRI IS=80CRM_CNFI error when checking the update rules"
Can any one help me regarding this BC installation issue?
Edited by: S Baruah on Sep 3, 2009 12:12 PM
Edited by: S Baruah on Sep 3, 2009 12:14 PM

See the error log for the same...there will be procedure to correct the same...just follow that...
Also see if IC=0CRM_PRI IS=80CRM_CNFI are active.

Technical Content

we have just finish the BI7 ugprade.
When I run RSA1 (for the first time), it says the job BI_TCO_ACTIVATION is schedule and run in the background. I check on the website site and it says this Job will activate the Technical Content.
1) Question is why it automatically activate the Technical Content?
2) I thought it is up to us to decide if we want to install and activate the Technical Content from RSA1 ->Business Content?
3) Now the job is finished and it seems like some of the Technical Content have been activated a appear in RSA1.
4) Can I just delete them from the RSA1?
What should I do?
Please help.

BI_TCO_ACTIVATION automatically install the technical contents when you execute RSA1 tcode for the first time after system upgrade.
Technical contents consists of objects related to BI statistics, distributed statistics records etc. Which are different than the business content which we installs manually.
The technical BI Content must be installed or activated. The technical Content is installed automatically in the background (job name BI_TCO_ACTIVATION) when you execute RSA1 for the first time. For the other installations, you should wait until the job BI_TCO_ACTIVATION is completed. (OSS NOTE 979581)
You can have a look at OSS note 979581.

Urgent-Technical content Activation

Hi all,
I had a basic question.
I am activating Technical Content in BW.Do we have to activate the datasources in R/3 system and then replicate it in BW.Just like any other datsources?
I was under the assumption that activating the objects related to Technical contetn does not have to deal with R/3 system.As i see the datasources under the Bw system under the source system.
Please correct me if iam wrong?This is an urgent issue,appreciate with any help provided.

Hi sreenivas,
that was a very helpful answer.Now i can say that my doubt has been clarified "if i have to activate DS in R/3 for Technical Content".
But my other question is when i transport it to QA.I have been getting the following logs.
Warnings:
Application component TCT of DataSource 0BWTC_C02 does not exist Etc for each DS.
Errors:
DataSource 0BWTC_C02 does not exist in source system QBWCLNT100 of version A
Mapping between data source 0BWTC_C02 and source system QBWCLNT100 is inconsistent
Field CALDAY will not be delivered from DataSource 0BWTC_C02 in source system QBWCLNT100 Etc
I get a RC 8 on this.I checked the DS 0BWTC_C02 in Dev and it was in active version so saved it and retransported it but the same message.
please advice.
thanks in advance

Technical content Installation Issue

Similar Messages

Maybe you are looking for