Technical Content Object - Duplicate Records

Hi,
My PSA getting duplicate records for Technical Content Object. Due to that the load becoming failure.
Can I remove duplicate records form the Technical Content tables ?
Thanks,
Abhi.

Its 3.x Data Source. So it doesn't have DTP. I found SAP Note 1229385 - BIAC:Duplicate entries for 0TCTPRCVAR_TEXT in PSA . But it will works for SP19. We are on SP18.
KIndly pls let me know SAP Note for SP18 to avoid Duplicate entries for 0TCTPRCVAR_TEXT in PSA.
Thanks,
Abhi.

Similar Messages

Technical content objects Getwa_not_assigned

hi friends thanks for pervious replay
I have assigned the points but i have one more request this regrading technical content objects. plz find the error below and try to help thank you . thnaks in advance .
infoobjects for technical content is failed with the short dumps
0TCTIOBJNM,0TCTQUERY,0TCTIFCUBE, plz find the attached file for error
messages . i am unable to access the querys in the prodution sytem .
Date Time Message
2005.06.13 02:56:04 Job started
2005.06.13 02:56:04 Step 001 started (program SBIE0001, variant
&0000000000376, user ID BWADMIN)
2005.06.13 02:56:04 DATASOURCE = 0TCTIFCUBE
2005.06.13 02:56:04
2005.06.13 02:56:04 * Current Values for Selected Profile
Parameters *
2005.06.13 02:56:04
2005.06.13 02:56:04 * abap/heap_area_nondia......... 2000000000
2005.06.13 02:56:04 * abap/heap_area_total.......... 2000000000
2005.06.13 02:56:04 * abap/heaplimit................ 40000000
2005.06.13 02:56:04 * zcsa/installed_languages...... E3
2005.06.13 02:56:04 * zcsa/system_language.......... E
2005.06.13 02:56:04 * ztta/max_memreq_MB............ 250
2005.06.13 02:56:04 * ztta/roll_area................ 2000000
2005.06.13 02:56:04 * ztta/roll_extension........... 2000000000
2005.06.13 02:56:04
2005.06.13 02:56:07 ABAP/4 processor: GETWA_NOT_ASSIGNED
2005.06.13 02:56:07 Job cancelled

HI MR.Andrzej
thnaks for ur repaly i tried to do as u said but it gives me waring saying . see below . hope u can help . thanks in advance . i dont understand what to do .
ConvExits for assigned InfoObjects inconsistent: ' ' (KS:0TCTSYSID) - ALPHA(TS:0TCTSYSID)
Message no. RSAR367
Diagnosis
The InfoObject of the communication structure has the conversion exit "'. This InfoObject was assigned a field of the transfer structure as a transfer rule. However, conversion exit ALPHA belongs to this field. Problems and errors could occur later if the conversion exits differ.
Procedure
To prevent later problems, select a field with its correctly assigned conversion exit.
When loading from an R/3 system, you can ignore this message if the transfer structure field has a conversion exit and the InfoObject assigned in the transfer rules has no conversion exit.

Master data info object - duplicate records

Hi All,
I have a flat file which has department data that looks like this
0     OTHER
0      00 Other
1      01 Language Arts
2      02 Mathematics
3      03 Reading
4      04 Social Studies
5      05 Science
6      06 Student Success
7     07 Write Traits
1     READING
2     LANGUAGE ARTS
3     MATHEMATICS
4     SCIENCE
5     SOCIAL STUDIES
50     50 Profesional Development
6     BUSINESS EDUCATION
65     65 FRABOOMERANG
7     FOREIGN LANGUAGE
75     75 KA Software Product
8     Legacy = 8: No Description
80     80 CCI
89     89 Money Only EDC Wrkshps
9     GENERIC
99     99 Money Only Miscellaneou
I was asked to create master data info object for this. I created it but when I am loading it , I am getting an error that there are duplicate records.
What should be done? Will such data be still created as master data or an ODS ? Because there are duplicate records.
Thanks

Hi Eugene and Bhanu
I have the same issue. I have this master data flat file, with 2 fields . I am trying to load it . And the data looks like this
0----
1----
001 Work'g Words Spelling
2----
002 Vocab for Achievmt
3----
003 ETS95 Packets Program
4----
004 Every Day Counts
5----
005 Phonics We Use
6----
006 US94 History of US
7----
007 Masterng SAT 1/PSAT
I tried Bhanu's suggestion of ignoring duplicate records . I did not get any error but that I lost some data. So I tried Eugene's suggestion of shifting the fields .. I moved the second field to the frist place and saved and loaded it. I got this error.
"There are duplicates of the data record 2. with the key '3.' for characteristic 1.."
Any suggestions.
Thanks

Master data failed with error `too many duplicate records'

Dear all
below is error message
            Data records for package 1 selected in PSA -
            error                                                 4 in the update
LOng text is giving as below
Error              4 in the update
Message no. RSAR119
Diagnosis
The update delivered the error code                                                   4.
Procedure
You can find further information on this error in the error message of the update.
WOrking on BI - 7.0
any solutions
Thanks
satish .a

Hi,
Go through these threads, they have same issue:
Master data load: Duplicate Records
Re: Master data info object - duplicate records
Re: duplicate records in master data info object
Regards
Raj Rai

BI 7.0 Technical Content Activation

We have performed the technical upgrade from 3.5 to 7.0 and are in the process of performing the Post Upgrade steps. We are currently updated to level: SAP_BW 7.00 SP15.
One of the Post Upgrade steps referenced in the "How to ... Checklist: Rapid SAP NetWeaver 7.0 BI Technical Upgrade with BI Accelerator Implementation" SAP document references the the activation of BI Technical Content (even if there are no plans to use it). Our problem occurs when we attempt to activate the required Technical Content objects via IMG (TCode SPRO). When the activation reaches the Process Chain activation a couple of the Process Chains reference objects that are not available at our content patch level.
I have researched and understand the workaround discussed in OSS 1134944. My question is more general. Is the activation of the Technical Content absolutley required - even if we have no plans to make use of it initially? If so, can someone please explain why this is the case.

Ramesh,
I understand the purpose and usage of Business Content in BI. As I stated in my thread, the Post Upgrade How To Guide implies that the activation of the Technical Content (a component of BI Business Content) is required in 7.0 - even if there are no plans to use it. Since we are having problems with the activation of the Technical Content my question referred only to its objects. We are trying to understand why (if) this component of the Business Content is actually required as the document implies.
Dan

Technical Content Activation

Hi
Iam trying to activate technical content from Bus. content are and being unsuccessfull.
Steps i took
    Collected the technical content objects.
    Marked all of the objects to be installed.
    Ran install and nothing happenned.
    Then i tried to simulate the install, it is
        saying Role SAP_BWC_TCONT already exists.
Went back to Info providers sections and deleted all of the already existing series of info cubes from
0BWTC_C02.... C11. Delete the multiprovided C10 too.
assuming that this will clear up the role.
Once again tried the simulation and the same error comes up. Not sure how to to delete the role.
Please let me know how to do this.
Sampath

Hi,
By using T. Code PFCG we can create/ Edit the roles. So you can go to the T.code and choose the role and delete.
Thanks & regards,
Venkata Sharma.

Bi content objects collection for transport

Hi Experts,
may i know how can i colloect the technical contnet objects for transport?
basically i already transport a technical content content request to quality, after transporting i got the logs as some of the technical content objects have not been activated in quality, but i thougt i can directly activate the content objects by using the program RSDG_IOBJ_ACTIVATE and remaing programs for cubes,aggregates,data sources and all in quality sytem, but client dont want the mannuall activation in qulaity system, they are askig again i have to transport the active(which are the objects not in active version in quality) version from EST to ESQ and then re-import my main transport.
so now again i have to activate the objects in develpment, may i know if i activate the program RSDG_IOBJ_ACTIVATE in se38 and transport the request to quality is it ok (here have to create a new request for this?) here in asingle request can i activate all objects which are not activated (i have to go for activation to info objects, cubes, data sources, update rules,transfer structures) is there any sequence steps to collect this object, please provide me
Many Many thanks
Mrudula

Hi,
Activate all the necessary objects and collect them in a single request and check for any inconsistencies or inactive objects in the requests before transporting it to the QA or PRD in SE03.
Regards,
rik

Cant find BI Content Objects..

Hi Friends,
I am unable to find any SAP Delivered Objects under Business Content ( ex :Busines Content Cubes , ODS, InfoObjects , BC Reports... etc)
I can see only Technical Content Objects
Its really urgent to me.. Do i need to do any Configurations in BW after sucessfully Installing BW7.0
Any inputs i really appreciated them
Thanks,

Hi Vikash,
For BW7.0 , BI Content will be loaded while installating the BW..
we need not to load BI Content seperately ....
Are you sure do we need to do any configurations or settings after finsihin the BW Installation
Thanks,

SSIS - "Violation of PRIMARY KEY constraint. Cannot insert duplicate key in object ' tablename '. The duplicate key value is 1234 . Though there are no duplicate records.

Hi,
I am providing support to one of our clients, where we have jobs scheduled to load the data from the tables in the source database to the destination database via SSIS packages. The first time load is a full load where we truncate all the tables in the destination
and load them from the source tables. But from the next day, we perform the incremental load from source to destination, i.e., only modified records fetched using changed tracking concept will be loaded to the destination. After full load, if we run the incremental
load, the job is failing with the error on one of the packages "Violation of PRIMARY KEY constraint. Cannot insert duplicate key in object '<tablename>'. The duplicate key value is <1234>, even though there are no duplicate records. When we
try debugging and running the failing package, it runs successfully. We are not able to figure out why the package fails and when we run the next day it runs successfully. Request you to help me in this regard.
Thank you,
Bala Murali Krishna Medipally.

Hi,
I am providing support to one of our clients, where we have jobs scheduled to load the data from the tables in the source database to the destination database via SSIS packages. The first time load is a full load where we truncate all the tables in the destination
and load them from the source tables. But from the next day, we perform the incremental load from source to destination, i.e., only modified records fetched using changed tracking concept will be loaded to the destination. After full load, if we run the incremental
load, the job is failing with the error on one of the packages "Violation of PRIMARY KEY constraint. Cannot insert duplicate key in object '<tablename>'. The duplicate key value is <1234>, even though there are no duplicate records. When we
try debugging and running the failing package, it runs successfully. We are not able to figure out why the package fails and when we run the next day it runs successfully. Request you to help me in this regard.
Thank you,
Bala Murali Krishna Medipally.
I suspect you are trying to insert modified records instead of updating.

Duplicate records in master data info object

dear friends,
i got a standard infoobject called 'A' and it has got some attributes B,C,D,E for that one standard datasource with the following fields A,B,C,D,E exists and i loaded data. abapers had created a z table with the following P,Q,R,S,X,Y,Z fields. 'P' holds the same records what the 'A' infoobject holds. my requirement is to create a report on the following fields:
P,Q,R,S,B,C,D,E
WAT I DONE IS I CREATED A GENERIC DATASOURCE FOR THE FOLLOWING FIELDS P,Q,R,S AND I ADDED THE STANDARD INFOOBJECT CALLED 'A' WITH THE FOLLOWING FIELDS: Q,R,S.
AND I CRTEATED AND SHEDULED THE INFOPACKAGE FOR THE STANDARD DATASOURCE(A,B,C,D,E,) TO STANDARD INFOOBJECT(A,B,C,D,E,Q,R,S). NEXT I CREATED THE ANOTHER INFOPACKAGE AND SHEDULED THE INFOPACKAGE AND SHEDULED FROM GENERIC DATASOURCE (P,Q,R,S) TO STANDARD INFOOBJECT(A,B,C,D,E,P,Q,R,S) WITH TRANSFER RULES P->A,Q->Q,R->R,S->S. AFTER LOADING THE DATA I AM GETTING DUPLICATE RECORDS.I WILL GIVE THE TABLE HOW MY MASTER DATA LOOKS LIKE
A B C D E P Q R S
1 2 3 4 5
2 3 4 5 6
3 4 5 6 7
1         6 7 8 9
2         7 8 9 3
3         4 6 2 1
THIS IS HOW MY MASTERDATA LOOKS LIKE BUT I NEED IN THE FOLLLOWING FORMAT:
A B C D E P Q R S
1 2 3 4 5 6 7 8 9
2 3 4 5 6 7 8 9 3
3 4 5 6 7 4 6 2 1
PLEASE LET ME KNOW
THANKS & REGARDS,
HARI

Hari,
   why don't you enhance the Masterdata info object?. You are suppose to see overwritten records. infoobject A is primary key in the table.
try to enhance the masterdata Datasource. you will get required output or create masterdat generic Data source.
All the best.
any questions let us know.
Nagesh.

Duplicate records in DTP

Guys,
My DTP failed 4 days back, but the full load from Source system to PSA is executing successfully.
To correct the DTP load, I have deleted the last DTP request and also all the PSA requests except the last one and when I re-executed the DTP I am getting Duplicate records. Also, in the failed DTP header, I am seeing all the deleted PSA requests?
How do I resolve this issue? I cannot check Handle duplicate records since it is a Time dependent data.
Thanks,
Kumar

Hi Kumar,
1.deleting from PSA and updating is not a permanent solution..
chk wht are the records creating dupicates in PSA first...
the issue with the duplicates are not from PSA previously there are some records in the object itself...
so deleting from PSA will not solve the issue...
chk the data from source tables itself why the wrong data is cmg into PSA like tht...
then u can edit with the correct records in PSA and update the data into target using DTP..
u can create an error DTP for tht so tht it'll be easy to trace the duplicates easily,...
2. You have the option "handle duplicate reords" in the DTP.
check the box and try to load the data again.
If this is time dependent master data then check also "valid to" as key along with other objects in sematic group option in the DTP.
check this and they try to load the data.
http://help.sap.com/saphelp_nw70/helpdata/EN/42/fbd598481e1a61e10000000a422035/content.htm
Regards
Sudheer

Technical Content

we have just finish the BI7 ugprade.
When I run RSA1 (for the first time), it says the job BI_TCO_ACTIVATION is schedule and run in the background. I check on the website site and it says this Job will activate the Technical Content.
1) Question is why it automatically activate the Technical Content?
2) I thought it is up to us to decide if we want to install and activate the Technical Content from RSA1 ->Business Content?
3) Now the job is finished and it seems like some of the Technical Content have been activated a appear in RSA1.
4) Can I just delete them from the RSA1?
What should I do?
Please help.

BI_TCO_ACTIVATION automatically install the technical contents when you execute RSA1 tcode for the first time after system upgrade.
Technical contents consists of objects related to BI statistics, distributed statistics records etc. Which are different than the business content which we installs manually.
The technical BI Content must be installed or activated. The technical Content is installed automatically in the background (job name BI_TCO_ACTIVATION) when you execute RSA1 for the first time. For the other installations, you should wait until the job BI_TCO_ACTIVATION is completed. (OSS NOTE 979581)
You can have a look at OSS note 979581.

Steps in Technical Content (0TCT*)

Hello,
Please let me know the steps are correct or something is missing.
1) Activate the Technical content just like business content (say activating cube 0TCT_C03: Data Manager Statistics )
2) Check the extractor in BW, t-code RSA3 (self system) to see number of records
3) Load the data using infopackage and schedule delta
4) Run the standard query on this cube
Just need some clarification on "Activating Data Transfers for BW Statistics". This can be found in menubar Tools --> BI Statistics Setting. I can understand that here you can activate and de-activate individually the processes for saving and transferring data. But if we dont do this, can't we see the data in reports. Is this mandatory?
Please advice
Regards
Pank SAP

Hi Pank,
For all the Queries/Workbooks for which you want to collect Stats and see them in Reports, you have to activate or mark them/relevant Infoproviders in Datawarehousing Workbench.Tools> BI Statistics Settings.
For the new statistics, you have to determine the objects for which you want to update the statistics and to what level of detail. You call this dialog from the Data Warehousing Workbench. It has changed completely from the previous statistics functionality.
In addition, you can manually assign a priority to the queries, InfoProviders and process chains. This priority is evaluated in the statistics. This can be used to establish a ranking or to exclude objects from the display in a report.
Please search in SAP Help, you will get more stuff.
http://help.sap.com/saphelp_nw70/helpdata/en/43/15c54048035a39e10000000a422035/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/ef/372242c4e05033e10000000a155106/frameset.htm
Thanks
CK

Testing BW Statistics (Technical Content)

Hello ever one,
need some help in testing BW Statistics.
I have install all standard 6 cube and 1 multiprovider in Dev.
Every thing went fine,I am facing problem in testing,
as i am comparing BW Statistics Report out come with
BW objects (such as Cube/ODS-records/deleted records)
which are no where matching with BW Statistics report.
Is their any specific setting i have missed out coz of this
its not giving correct report ?
or some thing else need to be done for testing.
please let me know.
Thanks & Regards.

MWM,
Is this with respect to :
1. Requests being deleted ?
2. Selective deletion ?
Also what is the nature of mismatch - the records do not tally ?
2. There are no records in statistics ?
Try refreshing stats for the cubes and then reload technical content once again.. also check the same in table RSDDSTAT.
Arun

Setting change to correct duplicate records ..

Hi Experts,
> I tried loading a flat file to an ODS which was in the quality system and i got some duplicate rows which i had to correct manually in the PSA.
> When i tried loading the same flat file to the same ODS in Production , i did not get the error message 'duplicate records' .
Can you please tell me what is the setting that has to be changed to allow duplicate records, or correct it ...that i have to do in the quality.
Help done would be defenately rewarded with points ....
Thanks ,
Santosh ....

Hi Santhosh,
Remove check for unique data records.
<i><b>Unique Data Records</b></i>
With the Unique Data Records indicator, you determine whether only unique data records are to be updated to the ODS object. This means that you cannot load a data record into the ODS object the key combination for which already exists in the system otherwise a termination occurs. Only use this setting when you are sure that only unique data records are to be loaded into the ODS object (for example, single documents). A typical application of this is in the loading of mass data. It improves the load performance.
You can also deselect this indicator again (even if data has already been loaded into the ODS object). This can be necessary if you want to re-post deleted data records using a repair request (see: Tab Page: Updating). In this case, you need to deselect the Unique Data Records indicator before posting the repair request, following which you can then reset the Unique Data Records indicator once more. The regeneration of metadata of the Export DataSource, which takes place when the ODS object is reactivated, has no effect on the existing data mart delta method.
More info @ <a href="http://help.sap.com/saphelp_nw04/helpdata/en/a6/1205406640c442e10000000a1550b0/content.htm">ODS Object Settings</a>
Hope it Helps
Srini

Technical Content Object - Duplicate Records

Similar Messages

Maybe you are looking for