Technical content objects Getwa_not_assigned

hi friends thanks for pervious replay
I have assigned the points but i have one more request this regrading technical content objects. plz find the error below and try to help thank you . thnaks in advance .
infoobjects for technical content is failed with the short dumps
0TCTIOBJNM,0TCTQUERY,0TCTIFCUBE, plz find the attached file for error
messages . i am unable to access the querys in the prodution sytem .
Date Time Message
2005.06.13 02:56:04 Job started
2005.06.13 02:56:04 Step 001 started (program SBIE0001, variant
&0000000000376, user ID BWADMIN)
2005.06.13 02:56:04 DATASOURCE = 0TCTIFCUBE
2005.06.13 02:56:04
2005.06.13 02:56:04 * Current Values for Selected Profile
Parameters *
2005.06.13 02:56:04
2005.06.13 02:56:04 * abap/heap_area_nondia......... 2000000000
2005.06.13 02:56:04 * abap/heap_area_total.......... 2000000000
2005.06.13 02:56:04 * abap/heaplimit................ 40000000
2005.06.13 02:56:04 * zcsa/installed_languages...... E3
2005.06.13 02:56:04 * zcsa/system_language.......... E
2005.06.13 02:56:04 * ztta/max_memreq_MB............ 250
2005.06.13 02:56:04 * ztta/roll_area................ 2000000
2005.06.13 02:56:04 * ztta/roll_extension........... 2000000000
2005.06.13 02:56:04
2005.06.13 02:56:07 ABAP/4 processor: GETWA_NOT_ASSIGNED
2005.06.13 02:56:07 Job cancelled

HI MR.Andrzej
thnaks for ur repaly i tried to do as u said but it gives me waring saying . see below . hope u can help . thanks in advance . i dont understand what to do .
ConvExits for assigned InfoObjects inconsistent: ' ' (KS:0TCTSYSID) - ALPHA(TS:0TCTSYSID)
Message no. RSAR367
Diagnosis
The InfoObject of the communication structure has the conversion exit "'. This InfoObject was assigned a field of the transfer structure as a transfer rule. However, conversion exit ALPHA belongs to this field. Problems and errors could occur later if the conversion exits differ.
Procedure
To prevent later problems, select a field with its correctly assigned conversion exit.
When loading from an R/3 system, you can ignore this message if the transfer structure field has a conversion exit and the InfoObject assigned in the transfer rules has no conversion exit.

Similar Messages

Technical Content Object - Duplicate Records

Hi,
My PSA getting duplicate records for Technical Content Object. Due to that the load becoming failure.
Can I remove duplicate records form the Technical Content tables ?
Thanks,
Abhi.

Its 3.x Data Source. So it doesn't have DTP. I found SAP Note 1229385 - BIAC:Duplicate entries for 0TCTPRCVAR_TEXT in PSA . But it will works for SP19. We are on SP18.
KIndly pls let me know SAP Note for SP18 to avoid Duplicate entries for 0TCTPRCVAR_TEXT in PSA.
Thanks,
Abhi.

BI 7.0 Technical Content Activation

We have performed the technical upgrade from 3.5 to 7.0 and are in the process of performing the Post Upgrade steps. We are currently updated to level: SAP_BW 7.00 SP15.
One of the Post Upgrade steps referenced in the "How to ... Checklist: Rapid SAP NetWeaver 7.0 BI Technical Upgrade with BI Accelerator Implementation" SAP document references the the activation of BI Technical Content (even if there are no plans to use it). Our problem occurs when we attempt to activate the required Technical Content objects via IMG (TCode SPRO). When the activation reaches the Process Chain activation a couple of the Process Chains reference objects that are not available at our content patch level.
I have researched and understand the workaround discussed in OSS 1134944. My question is more general. Is the activation of the Technical Content absolutley required - even if we have no plans to make use of it initially? If so, can someone please explain why this is the case.

Ramesh,
I understand the purpose and usage of Business Content in BI. As I stated in my thread, the Post Upgrade How To Guide implies that the activation of the Technical Content (a component of BI Business Content) is required in 7.0 - even if there are no plans to use it. Since we are having problems with the activation of the Technical Content my question referred only to its objects. We are trying to understand why (if) this component of the Business Content is actually required as the document implies.
Dan

Technical Content Activation

Hi
Iam trying to activate technical content from Bus. content are and being unsuccessfull.
Steps i took
    Collected the technical content objects.
    Marked all of the objects to be installed.
    Ran install and nothing happenned.
    Then i tried to simulate the install, it is
        saying Role SAP_BWC_TCONT already exists.
Went back to Info providers sections and deleted all of the already existing series of info cubes from
0BWTC_C02.... C11. Delete the multiprovided C10 too.
assuming that this will clear up the role.
Once again tried the simulation and the same error comes up. Not sure how to to delete the role.
Please let me know how to do this.
Sampath

Hi,
By using T. Code PFCG we can create/ Edit the roles. So you can go to the T.code and choose the role and delete.
Thanks & regards,
Venkata Sharma.

Bi content objects collection for transport

Hi Experts,
may i know how can i colloect the technical contnet objects for transport?
basically i already transport a technical content content request to quality, after transporting i got the logs as some of the technical content objects have not been activated in quality, but i thougt i can directly activate the content objects by using the program RSDG_IOBJ_ACTIVATE and remaing programs for cubes,aggregates,data sources and all in quality sytem, but client dont want the mannuall activation in qulaity system, they are askig again i have to transport the active(which are the objects not in active version in quality) version from EST to ESQ and then re-import my main transport.
so now again i have to activate the objects in develpment, may i know if i activate the program RSDG_IOBJ_ACTIVATE in se38 and transport the request to quality is it ok (here have to create a new request for this?) here in asingle request can i activate all objects which are not activated (i have to go for activation to info objects, cubes, data sources, update rules,transfer structures) is there any sequence steps to collect this object, please provide me
Many Many thanks
Mrudula

Hi,
Activate all the necessary objects and collect them in a single request and check for any inconsistencies or inactive objects in the requests before transporting it to the QA or PRD in SE03.
Regards,
rik

Cant find BI Content Objects..

Hi Friends,
I am unable to find any SAP Delivered Objects under Business Content ( ex :Busines Content Cubes , ODS, InfoObjects , BC Reports... etc)
I can see only Technical Content Objects
Its really urgent to me.. Do i need to do any Configurations in BW after sucessfully Installing BW7.0
Any inputs i really appreciated them
Thanks,

Hi Vikash,
For BW7.0 , BI Content will be loaded while installating the BW..
we need not to load BI Content seperately ....
Are you sure do we need to do any configurations or settings after finsihin the BW Installation
Thanks,

BI Technical Content in BI 7.0

Hi Experts,
Could any one help me in installing the BI Technical content in BI 7.0.
Please give me step by step procedure and tell me which are the Infocubes and Multiproviders i need to install.
Thanks,
Mansi.........

Hi,
please go through on below mention steps:
1.     In the administrator workbench, click the Business     Content bar on the left side and then click to set the default source systems.
2. The default source systems are displayed. Click to accept them &       continue. Double click Object Types.
1.     Click     and then select the collect automatically option i.e., BW will collect related objects for the infoproviders to be selected.
       4.   Click     and select the in dataflow before and afterwards             option. Now the infoobject & the object on which the infoobject depends will   be collected and activated together.
        5. Now we will select a Business content object and activate it. Click Select                objects under Infocubes to locate the required infocubes.
       6. Select the required infoobjects and then click
           Now the selected infocubes along with the respective infoobjects will be              transferred for installation.
       7. Click install and then select install to activate the selected infoobject and the              associated objects.
       8. The install in background option can be used when activating a large object.

Unused queries & Technical Content

Hi folks,
I need to find out the unused queries (e.g. the ones that weren't used in last 13 months). As far as I know the best way is to use the technical content (0BWTC_C10); but unfortunately it's not active in our system at the moment.
Another option is, using the "Last Used" field of RSZCOMPDIR. We have another "but" here. I've figured out that this field is updated even though a query is opened in query designer.
My questions are:
1. Any ideas for defining such queries in this situation?
2. What are the disadvantages of using this technical content? (I mean the extra work load at server-side.)
Thanks.

hi pekcan,
you can run transaction rszdelete to get a list of all queries not used for a defined time.
Unused/unnecessary Queries can lead to higher times in the 'Open' &#56256;&#56526; 'Query' dialog. They also cause an unnecessary allocation of disk space.
Check regularly whether queries are really still in use. The 'Last Used' field in transaction RSZDELETE (Delete Objects) is related to table RSZCOMPDIR. 'Last Used' is updated in table RSZCOMPDIR with the exact timestamp of when queries are executed with the BEx Analyzer or Web Frontend.
to get some idea regarding technical content, use the links.
http://help.sap.com/saphelp_nw70/helpdata/en/f2/e81c3b85e6e939e10000000a11402f/frameset.htm
with hopes,
Raja singh

Slow Moving Item Scenario - Technical content for Queries

Hello
Due to preparations for upgrade to BW 7.30 we would make an analysis of not or seldom used BEx reports (queries, workbooks, etc.)
All of unused objects should be deleted in advance of an upgrade.
I checked if there is a query which shows slow moving items for queries.
Is there any technical content (query) which reports this scenario for BEx objects?
Thanks for any advise.

follow steps in this doc:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/11291595-0501-0010-c881-e02c27261b55

Content Objects or XPATH in Header mapping..!! How to provide??

Hi All,
Iam doing B2B scenarios where i need to pass the Party name by based on the content of the message in the header mapping.
I think we can do by using Content Objects or XPATH in Header mapping, but the structure is not displaying in the Content Objects or XPATH in Header map in order to provide the condition.
I need to do anything else to see the structure over there?
Waiting for your replys.
Thanks&Regards
Seema.

Hi,
If you get the following msg while selecting the BS in Receiver Determination
"Message interface does not exist in any software components installed on this business system"
1) Open ID-----Double click on Business system that which u are using in the scenario
2) Check whether you are able to see the SWC in the Othere attributes TAB
3) If it is not there means goto SLD----Open the Technical System of R/3 by choosing Web as ABAp type
4) Click on Installed Products TAB
5) Click on Add New product and add your Product of the SWC whcih you are using for developement and Save it
6) Then goto Business systems TAB in the same Technical systems window and click on the Business System appears in the window.
7) Click on Installed products and Check the check box of your Product and then finally save that.
Now you should be able to see the SWC in the Othere attributes TAB in ID
Regards
Seshagiri

Technical Content Activation failed

Hi guys,
I tried to activate Technical Content via SPRO's Activate Technical Content in SAP NetWeaver BI.
However, I am facing with these problems:
1. If I choose only Activate SAPI DataSources, I will get a time out.
2. If I choose only Activate Technical Content, I will get the following error message:
Runtime Errors         UNCAUGHT_EXCEPTION
Exception              CX_RS_VERSION_NOT_FOUND
Date and Time          23.07.2008 09:38:27
Short text
     An exception occurred that was not caught.
What happened?
     The exception 'CX_RS_VERSION_NOT_FOUND' was raised, but it was not caught
      anywhere along
     the call hierarchy.
Since exceptions represent error situations and this error was not
     adequately responded to, the running ABAP program
      'CL_RSSM_LOADING===============CP' has to be
     terminated.
What can you do?
     Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
     administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_RS_VERSION_NOT_FOUND', was not
     caught in
    procedure "CHANGE_VARIANT" "(METHOD)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    Object   could not be found in version
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
"UNCAUGHT_EXCEPTION" "CX_RS_VERSION_NOT_FOUND"
    "CL_RSSM_LOADING===============CP" or "CL_RSSM_LOADING===============CM00G"
    "IF_RSPC_TRANSPORT~KEY_CHANGE"
If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
     Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
     In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"CHANGE_VARIANT" "(METHOD)", or its possible occurrence must be declared in the
RAISING clause of the procedure.
To prevent the exception, note the following:
Can someone help to me solve both problems???Thanks!!

Hi,
Aks your Basis person to look into the dump in tcode ST22. Also you can check in the SAP notes for error message displayed in the dump. There you find the correction notes.
Mostly this problem is related to Service packs.
Regards,
Sreenivas.

Technical Content Activation Failed in BI7

Dear experts,
Basically, I have posted this question in another category but the response is very disappointing. So I though of moving the question to here.
I am using SAPKW70015 i.e. Release 15. I tried to activate Technical Content via SPRO's Activate Technical Content in SAP NetWeaver BI.
However, I am facing with these problems:
1. If I choose only Activate SAPI DataSources, I will get a time out.
2. If I choose only Activate Technical Content, I will get the following error message:
Runtime Errors UNCAUGHT_EXCEPTION
Exception CX_RS_VERSION_NOT_FOUND
Date and Time 23.07.2008 09:38:27
Short text
An exception occurred that was not caught.
What happened?
The exception 'CX_RS_VERSION_NOT_FOUND' was raised, but it was not caught
anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_RSSM_LOADING===============CP' has to be
terminated.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_RS_VERSION_NOT_FOUND', was not
caught in
procedure "CHANGE_VARIANT" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
Object could not be found in version
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_RS_VERSION_NOT_FOUND"
"CL_RSSM_LOADING===============CP" or "CL_RSSM_LOADING===============CM00G"
"IF_RSPC_TRANSPORT~KEY_CHANGE"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"CHANGE_VARIANT" "(METHOD)", or its possible occurrence must be declared in the
RAISING clause of the procedure.
To prevent the exception, note the following:
Can someone help to me solve both problems???Thanks!!

Hi,
Aks your Basis person to look into the dump in tcode ST22. Also you can check in the SAP notes for error message displayed in the dump. There you find the correction notes.
Mostly this problem is related to Service packs.
Regards,
Sreenivas.

Activating technical content in BW7.0

Hi,
We are in the process of upgrading BW 3.5 to NW 2004s. We followed OSS note 965386 to activate technical content. We assigned all the required authorization to the user and followed the following path to activate the content:-
SPRO>SAP NW>Business Intelligence>Setting for BI Content>Business Intelligence>BI Admin Cockpit>Activate technical content in SAP NW BI
When we went to SPRO we did not see the last step i.e. Activate technical content in SAP NW BI.
Any help in this regard? Also, why not we can activate the technical content from RSA1.
Regards,
Anil

Its just like installing any other BI content. Just check what are the cubes you would be needing. If you are not sure and want to have latest and greatest, you can stick with the MultiProvider(0BWTC_C10) that is delivered comprising of all the six individual technical content cubes. While installing system would prompt you whether to install the datsources, say yes and provide ur credentials. That would take of activating DS. After installing, replicate the datsources from the source system. You are all set to go.
or alternately run program RSTCC_ACTIVATE_ADMIN_COCKPIT to install all this stuff automatically instead of collecting all the objects in BI content screen.
Message was edited by:
voodi

Variable in technical content

Hi all,
In the TECHNICAL CONTENT of my system I have a variable for the Exchange Rate Type (0RTYPE)called Z_RTYPE. When I run a query that use the currency conversion type this variable pops up in the variable screen, but it is not specifically added to my query.
Because this is not added to my query I cannot see this variable in the "Query Properties", which I need to be able to sort it.
Is there some way to add this variable from the technical content to my query?
Best regards,
TMV

Hi Pank,
For all the Queries/Workbooks for which you want to collect Stats and see them in Reports, you have to activate or mark them/relevant Infoproviders in Datawarehousing Workbench.Tools> BI Statistics Settings.
For the new statistics, you have to determine the objects for which you want to update the statistics and to what level of detail. You call this dialog from the Data Warehousing Workbench. It has changed completely from the previous statistics functionality.
In addition, you can manually assign a priority to the queries, InfoProviders and process chains. This priority is evaluated in the statistics. This can be used to establish a ranking or to exclude objects from the display in a report.
Please search in SAP Help, you will get more stuff.
http://help.sap.com/saphelp_nw70/helpdata/en/43/15c54048035a39e10000000a422035/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/ef/372242c4e05033e10000000a155106/frameset.htm
Thanks
CK

Implement BI 7.0 Technical Content for BI admin Cockpit

Hi Experts
I should begin to activate, fill, and use the BI Technical Content system.
My goal is to set up and use the BI Administrative Cockpit.
I start by filling the necessary objects and running the queries.
I am new to this area.Could any one provide me step by step solution for How to activate BI Admin Cockpit technical Content in BI 7.0
How should I tranfer data and run queries.Please through light on these topics.If you have any useful materila pls forward to my mail id:[email protected] your time and help.
Thanks,
Vamsi .

Hi,
Did you see the doc below.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90080703-4331-2a10-cd98-9c1e95acdea0
Regards.

Technical content objects Getwa_not_assigned

Similar Messages

Maybe you are looking for