Technical Content Query
Hi,
Can anyone please help me about the frequency and number of navigations info objects in Technical content query.
I have executed the query once and closed it. Post that I have uploaded the statistics data through the info packages provided.
After that I have executed the query 0BWTC_C10_Q021. In the output of this query, I am getting the values for frequency and number of navigations as 4.
Any idea why the count is showing as 4, when I executed the query once.
Thanks
Ramesh Ganji
Hi,
Normally when you copy the query it get stored in a Favourites folder just check it.
Hope this helps.
Assign points if useful
Venkat
Similar Messages
-
Init / Nav Flag in Technical Content Query 0TCT_MCA1_Q0142
Hi Experts,
In the technical content query 0TCT_MCA1_Q0142, there is a field Init / Nav Flag. I am not able to figure out the meaning of X and #, what does 'X' and '#' stand for, my understanding is that Init / Nav = '#' signify that it is a initialization step.
Could you please let me know whether my understanding is correct or not.
thanks and regards,
Rk.Hi Rajani
When im trying to install the Technical Content Process Chain then im getting the problem like below
<b>InfoObject 0LOGSYS :
Overwrite transfer routine with the Content
version ?</b>
Why it is like that . Please let me know .
kumar -
Technical Content - Query Execution
Hi,
I have recently activated the Technical Content.
How do I identify the number of the times the query has been executed by the user? I found one column 'Number of Navigations' in the BW-Statistics workbook. What is this meant for ?
Thanks
Ramesh Ganjihi Ramesh,
oss note 130696 -Performance trace in BW-Helps may explain the meaning.
to identify number of times query executed, there is keyfigure 0TCTSTAUIK - frequency,
check if helps business content query 0BWTC_C10_Q021
http://help.sap.com/saphelp_nw2004s/helpdata/en/68/84353cf261303de10000000a11402f/frameset.htm
you can utilize infoobjects OTCTQUERY, 0TCTSTAUIK (frequency), 0TCTUSERNM, 0TCTNAVCTR from multiprovider 0BWTC_C10
most user-run queries
130696 -Performance trace in BW-Helps
Symptom
How can you monitor the performance of a query in BW?
Other terms
Performance, tracing, BW, query, report, time
Solution
1) Activate the saving of statistical data for each InfoCube
-> BW Admin Workbench - Tools -> BW Statistics for Infoproviders ->
Select the "OLAP" field for the InfoCube.
3) Execute report/query
2) Analyze the RSDDSTAT table using Transaction SE16
Access, for example, using the InfoCube name or the user name or the
timestamp
1. Times that are saved:
QTIMEOLAPINIT
Time of the initialization of the query (for example, loading query in OLAP, compiling if required)
QTIMEOLAP
Time that the OLAP processor required
QTIMEDB
Time the database + network required to select the transaction data. The time is measured from when the SQL command is send to the database, and it is stopped when the requested data reaches the application server. This time therefore includes the transport on the network and the selection on the database.
QTIMEVARDP
Time the user required to enter the variables
QTIMEUSER
Time the user required between the navigation steps
QTIMECLIENT
Time of data formatting in the frontend
The time measurment starts when the OLAP processor has completed the data formatting. The data is then sent to the frontend (EXCEL). The time is stopped when the frontend (BW add-in in EXCEL) has inserted all data in the worksheets (writing the contents and formatting cell, if required). The time therefore includes the transport on the network with the RFC connection and the output in the frontend.
TIMECHAVLREAD
Time required to read master data
TIMEAUTHCHECK
Runtime of the authorization check.
TIMEREST
Time that could not be assigned in more detail (should be equal to 0; if this is not the case, something in the internal processing of the OLAP processor occured differently than expected.)
QRUNTIMECATEGORY
Time of a navigation step (QTIMEOLAPINIT + QTIMEOLAP + QTIMEDB + QTIMEEXCEL + QTIMECHAVLREAD) rounded to the next higher scaling (1,10,100,1000 ... seconds). As of 1.2B, this is rounded to 1,2,3, ... 10,20,30,...100,200,300,... seconds.
1. Data regarding the size of the query:
QDBSEL
Number of the records that had to be read on the database
QDBTRANS
Number of records that the database transferred to the server
QNUMCELLS
Number of cells that were transferred to the frontend
QNUMRANGES
Number of formattings that were transferred to the frontend
RECCHAVLREAD
Number of master data records to be read
1. In addition, the following is saved:
QAGGRUSED
Name of the aggregate used
QNACHLESEN
Indicator: Query reads during each navigation step
1. Administrative information
STATUID
Key of the table; link in view RSDDSTAT_V
QSESSION
All data for a call of the frontend (between start and end of the frontend) is compounded with this unique GUID.
QNAVSTEP
The navigation steps of a QSESSION are numbered in ascending order
QNUMOLAPREADS
Number of read operations OLAP processor for each navigation step
HANDLE
In the frontend, each embedded query has a separate, sequential number (handle)
If you want to analyze a certain query, start it and filter the values from the table afterwards: Selection options: infocube, user name, queryid (can be determined in the report monitor (Transaction RSRT)-> Technical information). The STARTTIME (UTC time) tells you whether you have found the correct session.
You can recognize a session because the QSESSION is always assigned the same ID. The sequence of the navigation steps is saved in QNAVSTEP. However, you can also determine it using the STARTTIME. -
Slow Moving Item Scenario - Technical content for Queries
Hello
Due to preparations for upgrade to BW 7.30 we would make an analysis of not or seldom used BEx reports (queries, workbooks, etc.)
All of unused objects should be deleted in advance of an upgrade.
I checked if there is a query which shows slow moving items for queries.
Is there any technical content (query) which reports this scenario for BEx objects?
Thanks for any advise.follow steps in this doc:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/11291595-0501-0010-c881-e02c27261b55 -
Fix for Tech Content query 0TCT_MC11_Q0230 ?
Hi,
Does anyone know if there is a fix for this Technical Content query 0TCT_MC11_Q0230 (DataStore Object Status: Analysis)? I have 16 requests loaded and activated ok in a particular DSO. However, this report is showing 16 requests as '# Req. Tech. Not OK', '#Req. Qual. Not OK' and '#Req. Not Activated'.
Please let me know.
Thanks,
AnthonyWhat you can do is :
1. Make these templates changeable - in the transport connection under RSA1 - select Object Changeability and then under TMPL right click and set to Everything changeable.
If this is your development system which is open - you need not do this....
2. You can also view the templates ( HTML version ) using program RS_TEMPLATE_MAINTAIN
Going by your error - looks like some Authorization objects are missing for you to be able to edit the templates - since these are SAP Defined - I would recommend not editing them and instead - going through the HTML using the program mentioned above and if you need a copy of the same - then copy the HTML and put it into a new template under the HTML View. -
Unused queries & Technical Content
Hi folks,
I need to find out the unused queries (e.g. the ones that weren't used in last 13 months). As far as I know the best way is to use the technical content (0BWTC_C10); but unfortunately it's not active in our system at the moment.
Another option is, using the "Last Used" field of RSZCOMPDIR. We have another "but" here. I've figured out that this field is updated even though a query is opened in query designer.
My questions are:
1. Any ideas for defining such queries in this situation?
2. What are the disadvantages of using this technical content? (I mean the extra work load at server-side.)
Thanks.hi pekcan,
you can run transaction rszdelete to get a list of all queries not used for a defined time.
Unused/unnecessary Queries can lead to higher times in the 'Open' �� 'Query' dialog. They also cause an unnecessary allocation of disk space.
Check regularly whether queries are really still in use. The 'Last Used' field in transaction RSZDELETE (Delete Objects) is related to table RSZCOMPDIR. 'Last Used' is updated in table RSZCOMPDIR with the exact timestamp of when queries are executed with the BEx Analyzer or Web Frontend.
to get some idea regarding technical content, use the links.
http://help.sap.com/saphelp_nw70/helpdata/en/f2/e81c3b85e6e939e10000000a11402f/frameset.htm
with hopes,
Raja singh -
Aggregates on Technical Content
Hi Guru's,
I have installed the Technical Content Cube ( 0BWTC_C05) ,which is for ware house performance monitoring, Now I have to create a process chain to load data into this Infocube. As we are not using the Multiprovider,we cant have the standard queries on this cube. I have created a Query to get the data necessary . I want to create an aggregate for this infocube . How to manage this in the process chain ,and My doubt is if we create the aggr in Dev system, will this be carried to QA system and prd ?? I will be really Glad if any of you can send me the PC Chain used to load this Infocube, as I am not sure what process to include .
Thanks,
KrishHi Krish,
You can transport the aggregates created in Dev to QA and Prod boxes. Also most of the projects do allow the creation of aggregates in Prod/QA also so you can create the aggregates there.
The load steps for 0BWTC_C05 would be like this:
1. Load all the attribute/text associated with the cube 0BWTC_C05.
2. Aplly Hier/Attr Change.
3. Load the data for 0BWTC_C05.
Bye
Dinesh -
Hi all,
In the TECHNICAL CONTENT of my system I have a variable for the Exchange Rate Type (0RTYPE)called Z_RTYPE. When I run a query that use the currency conversion type this variable pops up in the variable screen, but it is not specifically added to my query.
Because this is not added to my query I cannot see this variable in the "Query Properties", which I need to be able to sort it.
Is there some way to add this variable from the technical content to my query?
Best regards,
TMVHi Pank,
For all the Queries/Workbooks for which you want to collect Stats and see them in Reports, you have to activate or mark them/relevant Infoproviders in Datawarehousing Workbench.Tools> BI Statistics Settings.
For the new statistics, you have to determine the objects for which you want to update the statistics and to what level of detail. You call this dialog from the Data Warehousing Workbench. It has changed completely from the previous statistics functionality.
In addition, you can manually assign a priority to the queries, InfoProviders and process chains. This priority is evaluated in the statistics. This can be used to establish a ranking or to exclude objects from the display in a report.
Please search in SAP Help, you will get more stuff.
http://help.sap.com/saphelp_nw70/helpdata/en/43/15c54048035a39e10000000a422035/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/ef/372242c4e05033e10000000a155106/frameset.htm
Thanks
CK -
Technical Content(Statistics)
Hi,
Previously I installed the BI statistics manually (not over SPRO). During the activation the system created datasources in all conected systems like R/3 dev. system. Also the activated process chains include the delta loads from these R/3 based datasources.
My doubt is, the existing dataload steps in the process chains might be wrong. Can anyone tell me which datasources should be used from R3 side and which should be the BW based?
The process chains I mentioned are:
Content Master Data
System Master Data
Data Load Statistics - Delta
Load Statictics Data Delta
Query Runtime Statistics - Delta
Thanks
SenoySenoy,
Statistics load from BW only. Not from R/3. all data sources are from BW only.
Please check:
[BI7: Administration Cockpit Technical Content BI Statistics|http://sapbwneelam.blogspot.com/2008/10/administration-cockpit-technical.html]
[BW 3.5: How to setup bw statistics|https://www.box.net/shared/us1b13ijq2]
Hope it Helps
Srini
[Dont forget to close the call by assigning poings.... - Food for Points: Make a Difference through Community Contribution!|https://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/007928c5-c4ef-2a10-d9a3-8109ae621a82] -
Technical content for the BI statistics
Hi Guru's
What is technical content for the BI statistics and where do I find this???
I want to know what is the procedure to know which query is mostly executed in the system and by how many users.
Thanks & Regards.Hi,
What is technical content for the BI statistics and where do I find this???
you can enable this facility
go to RSA1> tools >bw statistics>here we have two options like OLAP,WHM ,if you chk OLAP for the respective cube,now it will display all the related infromation i.e all the details of the queries pertaining to the cube
WHM will store all related data staging related information
want to know what is the procedure to know which query is mostly executed in the system and by how many users
the below cubes will meet your requirement
0BWTC_C10_Q011 OLAP Use per User
0BWTC_C10_Q506 OLAP Use per User (Total Number of Records)
0BWTC_C10_Q505 OLAP Use per User (Total Time)
0BWTC_C10_Q503 OLAP Use per User (Time)
chk the below link
http://help.sap.com/saphelp_nw04/helpdata/en/88/3e1f3b5839e10fe10000000a114084/content.htm
Once you install technical content you can use the features of BW statistics etc..
Cheers,
Swapna.G -
Technical Content - Delta Initialization
Hi,
While loading the Technical Content data, Do I need to run the Transactions - Delta Initialization infopackages everytime before I run the delta info packages.
Please help.
Thanks
Ramesh GanjiHi AHP,
I have executed both with text / without text infopackages for both 0TCTTQUERY & 0TCTQUERID.
I also checked the query by displaying key and name. Is is showing as #.
Post that I checked the Statistics cube. In cube some rows are blank without any query name, infocube name. But the frequency is having the value. May be because of this it is showing in the report.
Thanks
Ramesh Ganji -
Roles and queries Technical content cube
Dear Experts,
Is anyone aware of any technical content cube that has information about roles and which queries those roles have access to?
ie. I need Roles - Query mapping
I have already looked in to AGR_1251 table but here the direct value is not present. I will have to evaluate the S_RS_COMP and
S_RS_COMp1 authorization objects. Iam looking for another method. So please dont suggest AGR_1251 table.
Thanks,
KrisHi Kris,
The way that is there to find out the query - mapping details is already known to you which is the best possible way. But apart from that if you would like to know the roles present in your system then you can simply use the Metadata Repository that is already there and is easily accessible.
1) Just go to the RSA1-> Left hand side bottom -> Metadata Repository -> Click on it or use tcode RSORMDR.
2) You will get list for all the Activated objects in your production system.
3) Locate the Role object from Right hand side.
4) On clicking the Role you will get all the roles that have been created in your system.
If you want the role related to a query then you can simply select the Query object from the metadata repository, you will get list of all queries & further clicking on the query will give you entire details about the query like roles etc.
Also you can use your own method.
You will need to write your own abap to get the details by writing logic which compares the data from both the tables and displays the data accordingly else the best option that is always there is using Metadata Repository.
Thanks -
Steps in Technical Content (0TCT*)
Hello,
Please let me know the steps are correct or something is missing.
1) Activate the Technical content just like business content (say activating cube 0TCT_C03: Data Manager Statistics )
2) Check the extractor in BW, t-code RSA3 (self system) to see number of records
3) Load the data using infopackage and schedule delta
4) Run the standard query on this cube
Just need some clarification on "Activating Data Transfers for BW Statistics". This can be found in menubar Tools --> BI Statistics Setting. I can understand that here you can activate and de-activate individually the processes for saving and transferring data. But if we dont do this, can't we see the data in reports. Is this mandatory?
Please advice
Regards
Pank SAPHi Pank,
For all the Queries/Workbooks for which you want to collect Stats and see them in Reports, you have to activate or mark them/relevant Infoproviders in Datawarehousing Workbench.Tools> BI Statistics Settings.
For the new statistics, you have to determine the objects for which you want to update the statistics and to what level of detail. You call this dialog from the Data Warehousing Workbench. It has changed completely from the previous statistics functionality.
In addition, you can manually assign a priority to the queries, InfoProviders and process chains. This priority is evaluated in the statistics. This can be used to establish a ranking or to exclude objects from the display in a report.
Please search in SAP Help, you will get more stuff.
http://help.sap.com/saphelp_nw70/helpdata/en/43/15c54048035a39e10000000a422035/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/ef/372242c4e05033e10000000a155106/frameset.htm
Thanks
CK -
Datasources Missing when Installing Technical Content for BI Admin Cockpit
Hi,
I have installed the Technical Content for BI Admin Cockpit in our QA systems, for BI7, using SPRO, and it seems that there are some missing datasources, transfer rules, etc.,
The one's that are missing are:
=> 0TCTPRCSVAR_TEXT
=> 0TCTPRCSVAR_ATTR
=> 0TCTBWOBJCT_TEXT
=> 0TCTBWOBJCT_ATTR
Does anyone know if this is a known issue, that these are not available?
Please let me know if they're required, and if there's a fix to get them back.
Thanks,
JohnHi John,
In my system the symptom is the same. So I just installed them myself in RSA1->BI Content.
I don't think it's a big problem because the queries on the MultiProviders can run without these master data. For example, you may find the text of query is missing but you can see query's technical name.
I remember when I activate 0TCTBWOBJCT_TEXT and 0TCTPRCSVAR_TEXT, these datasources are in BI 7 version but there's no transformation. So I create myself.
Please let us know if you have other questions.
Regards,
Frank -
How can i use Bi-Technical Content is used for measuring the performance of
Hi
recenetly i implemented the BI7.0 for one client. I want to know how to use 'BI Administraction Cockpit,.
Actual what technical content does ???
And how can i use technical content or statistics for measuring the performance of my queries. Please let me know
kumarHi Ravi,
BI Admin Cockpit is enhancement of BW Statistics.
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/08a75d19e32d2fe10000000a11466f/frameset.htm
Check this thread also:
BI Statistics comparision with the old
Regarding the performance check the link below.
Re: Query - Performance
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/15c54048035a39e10000000a422035/frameset.htm
Regards,
Anil
Maybe you are looking for
-
How do I retrieve iphoto library from Time Machine when the Mac doesn't have enough memory
Is there a way to retrieve (or view) specific photos from iphoto library when it resides in Time Machine? The iphoto library file is much bigger than the free space available on the Mac; erasing unneeded files may not free up enough space if the libr
-
Can't get ipod to show up...
I'm sure this sort of question has been posted before, but I have an annoying problem with my ipod. Long story short, I got a new computer and hooked my ipod up to it and everything. I downloaded itunes and even bought a couple songs, but I can't tra
-
Business Intelligence Setting Up BI in Netweaver 7.0 ABAP Trial version
Hi , I have installed NEtweaver 7.0 , successfully. I Logged in to client 000 with DDIC or BCUSER, change active client to 001 Run SE16, edit table RSADMINA, field BWMANDT = 001 ( or 1 ). This step is fine. Created the new user e.g. NWUSER and grant
-
AIFF's imported are always out of sync and need to be rendered!!!!!
I have had this problem for years, has anyone figured out hoe to get sound files that are in sync in pro Tools and in Sound Track Pro to be in sync in FCP?? This is the strangest thing that you can not import files into a PAL session without a red li
-
Why do my layers disappear when I save a .jpg?
Photoshop has learned a new trick in my office today: I arrange all of my text and layers the way I want them, get all ready to save and my group of layers becomes invisible. This is odd. They are all set to be visible in the layers window, soI selec