Technical details of permanent failure: DNS Error: Domain name not found

I have tried to test eprint and keep getting an error. DNS Error: Domain name not found
I can print thru my network fine, but I get this error with eprint. My eprint address ends in hpeprint.co
Is this correct?

Found the problem. The printer display shorten my eprint address and dropped the "m" from com. Now to enjot my HP eeprinter.

Similar Messages

Postfix relay=none, ... status=deferred (Host or domain name not found...

Hi,
I actually posted this question 2 weeks ago but under the wrong topic. So, first of all wanted to apologise for double-posting... but since no one replied, I thought I'd try again under the right topic.
I've been trying to solve this all day today (that was Feb 26th). I used to be able to send emails but for some reason it does not work anymore. At first I thought it was a problem with php (I use entropy pack php 5.2.6) but after searching the topic, I think it is a problem with my network. BTW OS is 10.5.5 and Postfix version 2.4.3
First of all, after computer restart, I don't think postfix starts automatically
Running 'sudo postfix start' gives me:
postfix/postfix-script: starting the Postfix mail system
Looking at '/var/log/mail.log' I find:
Feb 27 12:51:04 AMs-MBP postfix/qmgr331: AA70A7A7C77: from=<[email protected]>, size=842, nrcpt=1 (queue active)
Feb 27 12:52:19 AMs-MBP postfix/smtp456: AA70A7A7C77: to=<[email protected]>, relay=none, delay=3437, delays=3362/0.02/75/0, dsn=4.4.3, status=deferred (Host or domain name not found. Name service error for name=email.com type=MX: Host not found, try again)
Running 'sudo postfix check' does not give me any errors
Checking my '/etc/resolv.conf' it has nameserver 192.168.1.1
Running 'ifconfig | grep netmask | grep -v 127.0.0.1 | awk {'print $2'}L' gives:
192.168.1.5
Checking http://switch.richard5.net/2006/08/19/fatal-open-lock-file-pidmasterpid/ and running 'launchctl list' gives me a long list but no item matches org.postfix.master
Running 'ps aux|grep postfix' gives
AM 546 0.3 0.0 599820 468 s000 S+ 1:41pm 0:00.00 grep postfix
_postfix 331 0.0 0.0 599816 824 ?? S 11:56am 0:00.04 qmgr -l -t fifo -u
root 329 0.0 0.0 600784 752 ?? Ss 11:56am 0:00.11 /usr/libexec/postfix/master
_postfix 519 0.0 0.0 599768 752 ?? S 1:36pm 0:00.01 pickup -l -t fifo -u
Running 'postconf inet_interfaces' at first gave me
inet_interfaces = localhost
which I changed to All in '/etc/postfix/main.cf'
I looked at http://www.postfix-book.com/debugging.html
Running 'telnet localhost 25' gives me
Trying ::1...
telnet: connect to address ::1: Connection refused
Trying fe80::1...
telnet: connect to address fe80::1: Connection refused
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
220 AMs-MBP.local ESMTP Postfix
quit
221 2.0.0 Bye
Connection closed by foreign host.
But running 'telnet 10.1.2.233 25' gives me
Trying 10.1.2.233...
telnet: connect to address 10.1.2.233: Operation timed out
telnet: Unable to connect to remote host
Running 'ping 134.169.9.107' takes a long time. After a while I stop it and get:
PING 134.169.9.107 (134.169.9.107): 56 data bytes
^C
o
+ 134.169.9.107 ping statistics ---
28 packets transmitted, 0 packets received, 100% packet loss
I have not idea what the problem is and/or how to fix it. I know the messages get to the postfix daemon but for some reason they do not continue on their way.
Please, does anyone have an idea of how to fix this?
TIA,
Elle

Dynamic IP addresses with DynDNS Updater (or equivalent) makes it pretty darned reliable, particularly if you buy DynDNS' Mailhop Forward service, which prevents the likes of roadrunner.com and aol.com from blocking mail coming from your server just because it lives in dynamicIP-land. Way cheaper than paying your ISP extra for a static IPA, too, and totally acceptable for low-volume, residential-based servers for personal not-for-profit use.
Regarding reliable delivery to a dynIPA server, you are only at risk of non-receipt for perhaps a few minutes immediately following when your ISP rotates your WAN IPA, until DynDNS Updater (or equivalent) updates the DynDNS (or equivalent) servers with your new WAN IPA. But that's really not a problem because I think all, well, okay, most, smtp servers will queue for a redelivery attempt if the initial delivery attempt just happens to occur at that time.
I wouldn't suggest this practice for high-volume enterprise-class servers or for people trying to run a bootleg mail server business for profit (besides, the ISP would shut it down as an abuse of terms of service, anyways), but for low-volume, residential-based servers for personal use and enjoyment, which I suspect is the case for the O.P., I can't say that I find anything unreliable about my dynamic IP-based mail server.

Webi Refreshing Error :database name not found and no default driver specified

Hi All,
When I refreshing the webi report from Launchpad getting bellow error
"database name not found and no default driver specified"
Bellow is the Screen shot
It is refreshing in webi Rich client (server and client tools are in same system) but not from Launch pad
1. Environment :BI 4.0 SP4
2. Server and client tools are installed in same system
3. Created a 32 bit odbc, universe connection is responding properly and report refreshing in rich client(I could not find 64 bit odbc) .
Can Please suggest me where I am doing wrong
Regards,
Mahi

Hi Mahi,
Seems like your BO server is 64 bits and you have created a 64 bits DSN; whereas your database requires 32 bits DSN.
Try below steps:
1. Navigate to the C:\Windows\SysWOW64 directory and open odbcad32.exe. This will open the ODBC Data Source Administrator for 32-bit drivers on the 64-bit server. NOTE: The ODBC Data Source Administrator that is located by clicking Start and Administrative Tools will only create 64-bit ODBC connections.
2. Click on the System DSN tab
3. Click on Add to create a new Data Source
4. Provide the database details
5. Your 32-bit ODBC data source is now ready for use.
Hope it will help.
Regards,
Yuvraj

Error: Datasource name not found and no default driver specified

HI All,
I have MySQL as my data base.
I created one universe on top of MySQL. Then i made one webI report on top of that and exported it to BO Portal (Infoview).
Now when I am refreshing this report, it gives me below error in Infoview while its getting refreshed in WebI.
[Database Error] [Microsoft ODBC Driver manager] Datasource name not found and no default driver specified.
WIS 10901
I found SAP Note 1200396 and have created DSN with Same name on Server.
But still I am facing same problem. I have not clustered enviroment.
Guys any one have some idea about this?
I will appreciate your answer.
Thanks in advance,
Rishit

If your BOBJ server runs on 64bit windows you should set up the DSN using the 32bit ODCB utility (<Windowa installation director>\SysWOW64\odbcad32.exe )
Regards,
Stratos

Some time I get technical details of permanent failure with one moste

The jpay.com contact is the main email where this happens.

Server not found
https://support.mozilla.com/en-US/kb/Server%20not%20found
Check and tell if its working.

Changing ODBC Connection results in Field Name not found error

Post Author: POH
CA Forum: Data Connectivity and SQL
I am using CR XI with mySQL 5.0 and VB6. The computer I use to to design my reports has a odbc dsn which is used to develop the reports. On the production computer the same odbc dsn is present but has a different server, database, user and password entries. I am using the code below to set the connection and test the database. For Each objDatabaseTable In objDatabaseTables objDatabaseTable.SetLogOnInfo "servername", "dbname", "user", "pw" objDatabaseTable.ConnectionProperties("UseDSNproperties") = True Next crxDatabaseTable crxDatabase.Verify No Error is given and the report in this case does not have any sub reports.Now when the command ViewReport is run the CR viewer is shown but the report is not displayed. The viewer shows the error "Filed Name not found". I do not have any formel fields in the report and I have checked to make sur that both databases have the same structure. Can any body help me. Regards Paul

Did you add a System DSN or a User DSN? If you added a User DSN from your own login, the asp.net application will not be able to use it unless its application Pool in IIS is configured to run under the same credentials that you used for creating
the DSN. It's better if you add a System DSN.
Also, be careful to ensure that you are using a 64 bit DSN, unless you configure the application to run in 32 bits. If the 64 bit application attempts to use the 32 bit driver you get the same error message "Data source name not found and no default
driver specified". See this KB article:
http://support.microsoft.com/kb/942976/en-us

Technical details of temporary failure: TLS Negotiatio...

Hi
2 days ago, I stop getting e-mails from a few domains. One of them was Gmail.
Am not sure why, because I have not done anyting to my Exchange 2010. It fully patched, and everything seems okey.
Many other external senders can send into us, outlook.com can.
Got an DSN from Gmail thoug.
This is an automatically generated Delivery Status Notification
THIS IS A WARNING MESSAGE ONLY.
YOU DO NOT NEED TO RESEND YOUR MESSAGE.
Delivery to the following recipient has been delayed:
[email protected]
Message will be retried for 2 more day(s)
Technical details of temporary failure:
TLS Negotiation failed
----- Original message -----
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
d=gmail.com; s=20120113;
h=mime-version:in-reply-to:references:date:message-id:subject:from:to
:content-type;
bh=tL3LLdgLkulNwsKv7NnCVs8NabfFaEB132no/oLiW6E=;
b=AssjOsQ5c0D+rqHW5FKROI8CGWXWX6Cl0FnajAiSh+kpo8o+Y5YF3dJJMrFnNZ2N/l
RKRvyikGzv7cKjd+eXrHNg29H7t21Q8j0GbYvs27LWYkcCMxE+3wCl+cqg1oOKJmpZhf
6i06dClWAD2qpdPguK2KbSCTaocguRY9F69Eq36qVvOOexEUlR7X+eKForHuOVZrcVrv
wOGB5KOtpd6DcW9JRMCXL0+dE5zlSvCCACEOPV9BUwN42NVkaoG/pYQJ5F+47WstorAD
wXrN6JbF7WIYBEIjJ7Vbde3fAl/8mGE0pgPw+fyc6b8FtI1BeGb+gdj5/23uxA2rZsHZ
AR7g==
MIME-Version: 1.0
X-Received: by 10.180.91.201 with SMTP id cg9mr22507926wib.63.1418025240818;
Sun, 07 Dec 2014 23:54:00 -0800 (PST)
Received: by 10.216.154.5 with HTTP; Sun, 7 Dec 2014 23:54:00 -0800 (PST)
Anyone can help me here?

I see :)
[PS] C:\Windows\system32>Get-ReceiveConnector | Ft Name, AuthMechanism, RequireTLS, PermissionGroups
Name AuthMechanism RequireTLS
PermissionGroups
Default Exchange01 ...RequireTLS, ExchangeServer False ...ers, ExchangeLegacyServers
Client Exchange01 ...cAuth, BasicAuthRequireTLS False ...angeUsers, ExchangeServers
Public 360 ...cAuth, BasicAuthRequireTLS False ...angeUsers, ExchangeServers
Public 362_2 ...cAuth, BasicAuthRequireTLS False AnonymousUsers, ExchangeUsers
Print
...cAuth, BasicAuthRequireTLS False ...angeUsers, ExchangeServers

While viewing a page I suden get "Oops! This page appears broken. DNS Error - Server cannot be found." However I can back arrow to the page

I just upgrade to versions 18.0.1. I am suing Window 7 64 bit.
Now I while I am viewing a page I suddenly receive the error massage "Oops! This page appears broken. DNS Error - Server cannot be found."
I can use the back arrow key to bring the paper back.
If I have several tabs open, I can watch one tab after another change from the page name, It doesn't seem to matter who page it is, Yahoo, Washington Post, NBCNews,

I am not a techie. I keep 15-20 to tabs open at a time for reference while working. When I upgraded to this version, all my tabs were closed and my history was erased. I still have not recovered from that loss. I do not want to have this repeated!
If I was using pdfforge extension (what ever that is) before the upgrade, why is it venomous now?
Besides this issue, since upgrading I suddenly starting having the audio from commercials being played from tabs that are not active (open). I now have to leave my audio muted.
I expected assistance from Firefox not some unknown individual ( iamjayakumars) who for all I know is a troll trying to get me to do something to expose my computer to attack.
I allowed Firefox to collect data they needed from my computer when I submitted the question.
Fix the bug in your program! I have used Firefox since it came out. I am within a hairs width of switching browser. The only thing holding me with Firefox is my bookmarks. If I figure out how to export them, I am gone.
FIX YOUR BROWSER!!!

Error - Launching ConsoleOne Domain Database Not found

Normally working fine, just recently the gwia message is messing up preparing messages to go out. Tried to launch ConsoleOne and it says the Domain Database not found, click OK try again.... and I get ERROR OPENING DOMAIN DATABASE...
I ran GWcheck on the Post office, and it ran ok...
What next?

usadavidh,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

CUCM & CUP DNS and Domain name

Hello
CUCM 9.1, CUP 9.1 and CUC 9.1
I have not mentioned DNS or domain name on my CUCM and on my CUP, if i enable the DNS and domain name on the CUCM does it will change the license mac of CUCM AND CUP ???? which will cause me to rehost the license from the cisco licensing team.
thanks

Hi Jack,
You can do that. Nothing would happen.
please follow the links
https://supportforums.cisco.com/message/4109569#4109569
https://supportforums.cisco.com/thread/2227236
regds,
aman

RFC_ERROR_COMMUNICATION ERROR Group PUBLIC not found

I using the SAP Discovery 2004s system. When I logon to Portal using J2EE_ADMIN, then enter any tab for HR like HR admin or ESS I get the following error:
com.sap.mw.jco.JCO$Exception: (102)
RFC_ERROR_COMMUNICATION:
Connect to message server host failed Connect_PM TYPE=B MSHOST=iwdfvm2160
GROUP=PUBLIC R3NAME=ERP MSSERV=sapmsERP PCS=1 LOCATION CPIC (TCP/IP)
on local host with Unicode
ERROR Group PUBLIC not found
TIME Thu Dec 14 11:03:48 2006 RELEASE 700 COMPONENT LG VERSION 5 RC -6
MODULE lgxx.c LINE 4288 DETAIL LgIGroupX COUNTER
I have a PUBLIC entry in SMLG and I have a valid entry in etc/services. The problem I think is with SMLG the PUBLIC entry does not have a green box under the status field. Can someone elaborate on this more?

Ensure that your host file contains three entries pointing to IP addrsss of Discovery System:
<IP ADDRESS>[tab] SAPDiscoverySystem<space>iwdfvm2160<space>owdfvm2160.wdf.sap.corp
This addresses the internal file names as well as SAPDiscoverySystem. This can also be accomplished with three entrie in your company DNS but many companies do not allow out-of-domain entries.
I will modify the instructions on Prerequisites page.
Rick

I want to add refworks grabit to my tool bar, when I try to install for firefox it won' t let me this is what I get: HTTP Error 404.3 - Not Found The page you a

this is the complete error I get. I just installed firefox so that I can use this feature and now it is useless.
Error Summary
HTTP Error 404.3 - Not Found
The page you are requesting cannot be served because of the extension configuration. If the page is a script, add a handler. If the file should be downloaded, add a MIME map.
Detailed Error Information
Module StaticFileModule
Notification ExecuteRequestHandler
Handler StaticFile
Error Code 0x80070032
Requested URL http://www.refworks.com:80/refgrabit/install.xpi
Physical Path E:\RefGrabIt\install.xpi
Logon Method Anonymous
Logon User Anonymous
Failed Request Tracing Log Directory C:\inetpub\logs\FailedReqLogFiles
Most likely causes:
It is possible that a handler mapping is missing. By default, the static file handler processes all content.
The feature you are trying to use may not be installed.
The appropriate MIME map is not enabled for the Web site or application. (Warning: Do not create a MIME map for content that users should not download, such as .ASPX pages or .config files.)
If ASP.NET is not installed.
Things you can try:
In system.webServer/handlers:
Ensure that the expected handler for the current page is mapped.
Pay extra attention to preconditions (for example, runtimeVersion, pipelineMode, bitness) and compare them to the settings for your application pool.
Pay extra attention to typographical errors in the expected handler line.
Please verify that the feature you are trying to use is installed.
Verify that the MIME map is enabled or add the MIME map for the Web site using the command-line tool appcmd.exe.
To set a MIME type, use the following syntax: %SystemRoot%\windows\system32\inetsrv\appcmd set config /section:staticContent /+[fileExtension='string',mimeType='string']
The variable fileExtension string is the file name extension and the variable mimeType string is the file type description.
For example, to add a MIME map for a file which has the extension ".xyz": appcmd set config /section:staticContent /+[fileExtension='.xyz',mimeType='text/plain']
Warning: Ensure that this MIME mapping is needed for your Web server before adding it to the list. Configuration files such as .CONFIG or dynamic scripting pages such as .ASP or .ASPX, should not be downloaded directly and should always be processed through a handler. Other files such as database files or those used to store configuration, like .XML or .MDF, are sometimes used to store configuration information. Determine if clients can download these file types before enabling them.
Install ASP.NET.
Create a tracing rule to track failed requests for this HTTP status code. For more information about creating a tracing rule for failed requests, click here.
Links and More Information This error occurs when the file extension of the requested URL is for a MIME type that is not configured on the server. You can add a MIME type for the file extension for files that are not dynamic scripting pages, database, or configuration files. Process those file types using a handler. You should not allows direct downloads of dynamic scripting pages, database or configuration files.
View more information »

That file might have moved to a different location on the server. I think you'll need to check with RefWorks support or your local IT department on why the install page links do not work.

Error 15 file not found.

I was able to install arch linux on a 2 GB flash drive. But I cannot boot into arch linux from the grub menu. I greeted by a message like "error 15 file not found"
my menu.lst file looks like
# Config file for GRUB - The GNU GRand Unified Bootloader
# /boot/grub/menu.lst
# DEVICE NAME CONVERSIONS
# Linux Grub
# /dev/fd0 (fd0)
# /dev/sda (hd0)
# /dev/sdb2 (hd1,1)
# /dev/sda3 (hd0,2)
# FRAMEBUFFER RESOLUTION SETTINGS
# +-------------------------------------------------+
# | 640x480 800x600 1024x768 1280x1024
# ----+--------------------------------------------
# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
# +-------------------------------------------------+
# for more details and different resolutions see
# https://wiki.archlinux.org/index.php/GRUB#Framebuffer_resolution
# general configuration:
timeout 5
default 0
color light-blue/black light-cyan/blue
# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
# (0) Arch Linux
title Arch Linux
root (hd1,0)
kernel /vmlinuz-linux root=/dev/disk/by-uuid/9157e8a3-c1bd-499a-95fe-524cd9c07d0e ro
initrd /initramfs-linux.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd1,0)
kernel /vmlinuz-linux root=/dev/disk/by-uuid/9157e8a3-c1bd-499a-95fe-524cd9c07d0e ro
initrd /initramfs-linux-fallback.img
# (2) Windows
#title Windows
#rootnoverify (hd0,0)
#makeactive
#chainloader +1
/etc/fstab file looks like
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
tmpfs /tmp tmpfs nodev,nosuid 0 0
#UUID=15eb5a8a-dddc-4b28-8183-f81d450b78d5 swap swap defaults 0 0
#UUID=9157e8a3-c1bd-499a-95fe-524cd9c07d0e / ext3 defaults 0 1
#UUID=aae9fb61-b5ec-40b5-a3dd-232c9a77f29b /boot ext2 defaults 0 1
#UUID=f1a9a9ad-8344-4eb5-be91-1af155c756e4 /home ext3 defaults 0 1
UUID=15eb5a8a-dddc-4b28-8183-f81d450b78d5 swap swap defaults 0 0
UUID=9157e8a3-c1bd-499a-95fe-524cd9c07d0e / ext3 defaults 0 1
UUID=aae9fb61-b5ec-40b5-a3dd-232c9a77f29b /boot ext2 defaults 0 1
UUID=f1a9a9ad-8344-4eb5-be91-1af155c756e4 /home ext3 defaults 0 1
and result of #blikd is
/dev/sda1: UUID="edc30674-5e24-46ae-865c-647b5af6a1ca" TYPE="ext4"
/dev/sda5: UUID="8045e664-17ad-4bfd-8b5e-56d7f17fbcdd" TYPE="swap"
/dev/sdb1: UUID="aae9fb61-b5ec-40b5-a3dd-232c9a77f29b" TYPE="ext2"
/dev/sdb2: UUID="15eb5a8a-dddc-4b28-8183-f81d450b78d5" TYPE="swap"
/dev/sdb3: UUID="9157e8a3-c1bd-499a-95fe-524cd9c07d0e" TYPE="ext3"
/dev/sdb4: UUID="f1a9a9ad-8344-4eb5-be91-1af155c756e4" TYPE="ext3"

Here is the result of my fdisk -l /dev/sdb
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 100 102384 83 Linux
/dev/sdb2 101 356 262144 82 Linux swap / Solaris
/dev/sdb3 357 1533 1205248 83 Linux
/dev/sdb4 1534 1926 402432 83 Linux
Last edited by manish411 (2012-01-14 05:24:14)

PI MDM Adapter Error - MDM port not found

We are working on an R/3 - PI - MDM scenario using the PI MDM Adapter. We are currently encountering the following errors.
In RWB - Communication Channel Monitoring
MDM Adapter listener could not start due to: Can not create repository session '<server=XXXXXXXX serverUser=Admin repository=Product user=Admin>' caused by: Connection Failed: Cannot create connection to MDM Server 'XXXXXXXX' for one of the following reasons: (1) server does not exist, (2) server is not started, or (3) input/output problem while creating connection, error code: UnknownServer
In RWB - Message Monitoring
2009-09-08 15:31:22 Error Message could not be forwarded permantely to the JCA adapter. Reason: System error: MDM port not found
2009-09-08 15:31:22 Error Message could not be forwarded to the JCA adapter. Reason: Permanent error: Adapter call failed. Reason: com.sap.aii.af.lib.ra.cci.XIAdapterException: System error: MDM port not found
2009-09-08 15:31:22 Error Adapter Framework caught exception: System error: MDM port not found
2009-09-08 15:31:22 Error Delivering the message to the application using connection MDM_http://sap.com/xi/MDMAdapter failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.lib.ra.cci.XIAdapterException: System error: MDM port not found.
Is there an issue with our receiver communication channel and the MDM Access Parameters? We are using the Port code and Remote System code provided by the MDM team.
Anyone experience this same issue?

We are no longer seeing the MDM Port Not found error, but we are still seeing the UnknownServer error. Looking at RWB Message Monitoring it appears that the message is successfully sent to the MDM server, but nothing is coming into the Ready folder. Any ideas on where the message is going, and why it is not showing up in the Ready folder?
In RWB - Communication Channel Monitoring
MDM Adapter listener could not start due to: Can not create repository session '<server=XXXXXXXX serverUser=Admin repository=Product user=Admin>' caused by: Connection Failed: Cannot create connection to MDM Server 'XXXXXXXX' for one of the following reasons: (1) server does not exist, (2) server is not started, or (3) input/output problem while creating connection, error code: UnknownServer
In RWB - Message Monitoring
2009-09-11 14:04:15 Information The message was successfully received by the messaging system. Protocol: XI URL: http: //XXXXXXXX/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
2009-09-11 14:04:15 Information Using connection MDM_http ://sap.com/xi/MDMAdapter. Trying to put the message into the receive queue.
2009-09-11 14:04:15 Information Message successfully put into the queue.
2009-09-11 14:04:15 Information The message was successfully retrieved from the receive queue.
2009-09-11 14:04:15 Information The message status was set to DLNG.
2009-09-11 14:04:15 Information Delivering to channel: MDS_TEST_CC
2009-09-11 14:04:15 Information The message was successfully delivered to the application using connection MDM_http ://sap.com/xi/MDMAdapter.
2009-09-11 14:04:15 Information The message status was set to DLVD.
I thought the implementation of the MDM Adapter was suppose to be straightforward and simple
Edited by: Chris Williar on Sep 11, 2009 9:56 PM

Create_dynamic_table - error "Load program not found"

Hi experts,
i have receive error "Load program not found" at CALL METHOD cl_alv_table_create=>create_dynamic_table
Runtime Error          LOAD_PROGRAM_NOT_FOUND
Exception              CX_SY_PROGRAM_NOT_FOUND
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_PROGRAM_NOT_FOUND', was
neither
caught nor passed along using a RAISING clause, in the procedure
"FB_TABLE_CREATE_STRING" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
On account of a branch in the program
(CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)
or a transaction call, another ABAP/4 program
is to be loaded, namely " ".
However, program " " does not exist in the library.
I'm stuck in this annoying problem,,,can anyone help me?

Hi Maroz,
I know this is not best practise to post my question in some others, but i have posted it separately earlier
Dynamic ITAB from Excel
I have created a dynamic ITAB from 1 Row of Excel Sheet
LOOP AT ist_excel INTO w_excel WHERE row = 2. " Contains the Values provided in 2nd row of Excel
    APPEND w_excel TO row1.
ENDLOOP.
LOOP AT ist_excel INTO w_excel WHERE row = 3. " Contains the Values provided in 3rd row of Excel
    APPEND w_excel TO row2.
ENDLOOP.
LOOP AT ist_excel INTO w_excel WHERE row = 4." Contains the Values provided in 4th row of Excel Etc
    APPEND w_excel TO row3.
ENDLOOP.
LOOP AT row1 INTO w_excel.
    CLEAR wa_it_fldcat.
    wa_it_fldcat-fieldname = w_excel-value .
    wa_it_fldcat-datatype = 'C'.
    wa_it_fldcat-inttype = wa_details-type_kind.
    wa_it_fldcat-intlen = 40.
* wa_it_fldcat-decimals = wa_details-decimals.
    APPEND wa_it_fldcat TO it_fldcat .
ENDLOOP.
* Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = it_fldcat
    IMPORTING
      ep_table        = new_table.
ASSIGN new_table->* TO <dyn_table>.
* Create dynamic work area and assign to FS
CREATE DATA new_line LIKE LINE OF <dyn_table>.
ASSIGN new_line->* TO <dyn_wa>.
I followed the Link provided by to create a Dynamic ITAB
Please guide me how to pass these Value from excel to Dynamic Internal Table
Warm Regards
Ramchander

Technical details of permanent failure: DNS Error: Domain name not found

Similar Messages

Maybe you are looking for