Technical document on P2P  & O2C for R12

Hi All,
I need a technical document on Procure to pay cycle and order to cash cycle for R12. In which the process of these cycles and the information about the base tables getting effected by each step is explained.
Thanks

By CDC are you referring to Change Data Capture?
If so, do a search on "Change Data Capture" at http://tahiti.oracle.com, where all the Oracle documentation lives, and you'll get plenty of information. The change data is exposed in a series of tables, so there's no special client-side API-- just querying the appropriate tables & views.
Justin

Similar Messages

  • Dataguard document for R12.1

    We plan to implemnet Dataguard on EBS R12.1 (Redhat Linux). I only found document for R12:
    Business Continuity for Oracle Applications Release 12 on Database Release 10gR2 - Single Instance and RAC
         Doc ID:      452056.1
    anyone know document for R12.1 (ORACLE 11G database)?
    Thanks.

    Hi,
    Please refer to the following threads.
    Help Required to impliemnt the DataGuard Broker in 11.1.0.7
    Re: Help Required to impliemnt the DataGuard Broker in 11.1.0.7
    Step to setup the Dataguard in 11.1.0.7
    Re: Step to setup the Dataguard in 11.1.0.7
    Regards,
    Hussein

  • Technical Document Template for developing WD application

    Dear SDN community,
      Do you have any template for the technical document specific to WebDynpro(Java) development.
    Thanks!
    Surya.

    Look at the below link.. It will help you..
    Design Template for development a project in WebDynpro
    Raja T
    Message was edited by:
            Armin Reichert

  • Technical document template for WebDynpro application

    Dear SDN Community,
      Can you please tell me where can I get a Technical Document template for building a WebDynpro(Java) application.
    Thanks!
    Surya.

    hi,
    refer to Technical Specification link
    Ashu

  • Technical Document for Oracle BPM 10gR3

    Hi everybody,
    Is there any technical document for oracle bpm 10gR3
    Thanks for your attention

    Hi,
    What do you mean by technical document???
    You can get the details of coding in studio and managing enterprise in 10.3 documnetation
    http://download.oracle.com/docs/cd/E1315401/bpm/docs65/index.html_
    HTH,
    Charan

  • Anyone has setup document for R12?

    Hi all,
    Does anyone has setup document for R12 in any modules like PO, OM, INV, AR, AP or GL?
    Thanks,
    FAN

    Hi,
    What setup documents you are referring to?
    Oracle Apps documentation can be found at:
    Application release 11i and R12
    http://www.oracle.com/technology/documentation/applications.html
    For AIM documents, please refer to:
    AIM Methdology
    Re: AIM Methdology
    Regards,
    Hussein

  • Technical document require for english into French translation

    Hello dl-dba people
    I am current working on assessing the feasibility of translating some Oracle Report Figures from english into French.
    Are there any technical document that shows how to run a Oracle report builder 9i figures in French language or with both languages displayed.
    Or can somebody tell me how this is done.
    Thanks
    Brendon

    Anyone at all? I think you can, but I just want to confirm it before I present my answer. Thanks!

  • ETRM for R12.1.2 and greated

    We don't have eTRM for R12.1.2 and greater versions..what is the alternative for this? We don't even have Technical Reference Manuals for many modules of 12.1.2 and 12.1.3..
    Its becoming difficult to findout the table structure and design..do we have any good solution for this?
    Please advice.

    Hi;
    Note is soo clear,from note:
    *Note: As of 9-Sep-2011, the latest eTRM published was for 12.1.1 and it does not include the EBS tables added in 12.1.2 and 12.1.3.  The following are some of the tables that were added but not documented in the latest eTRM.  Refer to the product Release Notes:
    Oracle Warehouse Management 12.1.3 - Ref. Document 1101620.1
    OM change in R12.1.2 - Ref. Document 968382.1,
    AR Golden Tax Adaptor for Mainland China - Ref. Document 1180265.1*
    If those are not help than you need to rise SR
    Regard
    Helios

  • Issue with automatic numbering of figures in a Technical Document

    Hi everyone, thanks for taking the time to examine my issue. Basically I've inherited a Technical Document which was imported from Quark some years ago and badly cobbled together in IDesign by a novice and I'm bringing it up to standard to make it a bit more usable but do need to retain the conventions within it. It was written as a chaptered document so I've set up the 'chapters' as Sections in InDesign so as to allow for page number variables and a decent ToC etc. I'd like to have the diagram numbers (and associated x-references) automated too, but am floundering a bit with this.
    At the moment all the image captions are set in one paragraph style throughout the document, and I've been playing with the Bullets and Numbering Dialogue within this paragraph style. All the captions are part of the body text or in their own text frames (As opposed to being linked with image metadata or anything like that).
    The  manually written image number format in the document reads like 'Figure Chapter number, colon, Image number,  and then some have (a), (b), or (c). followed by the name)'  eg (worst case) Figure 8:5(c) Sealing the Blahblah Adaptor
    I realise I might have to set up a named list for each 'chapter' because I can't find a way to define the numbered list to show me;
    'Section number, dot, Image number (starting at one then continuing until the next section starts) dot and then if I need it an a, b, c. etc too'
    Not forgetting I have set up the written 'chapters' as Sections in Indesign.
    If I try adding the 'section symbol' to the number field in the bullets and numbering dialogue (inside my paragraph style)  I just get a weird little blue shape that presumably starts a new section rather than identifies the section I've put it in (so that isn't it) and if i try 'Chapter Number' from the number placeholder menu it only ever says '1' because InDesign only allows one 'chapter' per document (and my chapters are actually sections!).
    I do find the coding system for the 'insert special characters or numbered placeholder' really confusing - I'm not familiar with all of them, (and throwing circumflex's and hashtags in doesn't brighten my day) and since I don't know the codes trial and error seemed to be the way forward.  How are we supposed to know the codes - is there a list online somewhere?
    I could manually type the section number in the 'Number' text box in the dialogue (if I make a named list for each chapter) and lift a layer of confusion but surely there's a way to identify a section in a numbered/named list?
    I think I'm really close but it's driving me a bit crazy - I'm sure identifying levels within named lists might be something to do with it, but I can't see how to alter that. Do I need to set up a new paragraph style AND a new named list for each 'chapter' (section)? The alternative could be to split the document up and make a book file so the 'chapters' become real chapters? (I don't want to do this!)
    There's also something in RealWorld InDesign that worries me a bit - it says (even if I had it working the way I want) that it might number unthreaded text frames in the order they were created rather than the order they appear on the page? Um...
    The other thing is I do have a mixture of inline and anchored objects throughout this document so that might mess things up too?! *Sigh!*
    I'm using InDesign 5.5. for Windows. Many thanks for any tips! Hope somone out there is less confused than me!
    kind regards
    Phil

    You're so right!!!
    I really liked the idea of writing a book in pages. Have to write a second edition of something and did not want to use Word2008 on the Mac, because after one year it is still an unstable beast (crashes, crashes).
    So I checked ot Pages 09 - and alas
    * no xreferences
    * no automatic numbering of captions, figures, ...
    Then I asked my publisher for FrameMaker: The answer was: NO longer on the Mac since 2005. I can't believe this. Not a single decent program to write a book on a Mac.
    I don't want to go back to LaTex after 20 years - HELP me somebody
    and show me a few (automatic) workarounds how to play the automatic numbering and Xref tricks in pages.
    Otherwise it's really neat - BUT - nut for writing documents longer than 20 - 30 pages that need off that book like stuff.

  • XI Technical and Business System Definition For MDM 2.0

    Hi,
    We're trying to define the XI technical and business system definitions for our MDM 2.0 installation to work with SRM 5.0 and PI 7.0.
    In the documentation we have we can't find reference to what type of a technical and business system to define. Should they be abap/java/standalone/3rd party?
    Does anyone have any install scripts of what they did?
    Regards,
    Jerry Martinek

    You can set it as third party and it will work fine.  Because MDM isn't built on the wed application server like the majority of the netweaver apps, it's basically treated like a third party system as far as integration is concerned.  Hence you send and receive XML documents to PI and convert them into IDocs to send to R/3
    Check the beginning of this document on creating the business and technical systems for MDM
    /people/harrison.holland5/blog/2006/12/20/xi-configuration-for-mdm-integration--sample-scenario

  • Error when installing virtual appliance for r12.2.4

    Hello
    I have downloaded Oracle Virtual Appliance for Oracle  E-Business r12.2.4 in a following step by step manner but I am running into an error.  As per the readme, I have gone through the Note:1928303.1 but it does not address the issue.
    That said, is there any comprehensive, step by step document that outlines installation and implementation of Oracle Virtual Appliance for r12.2.4?
    Below are steps I ran.
    Step 1:  Downloaded and Installed Oracle Virtual Box version 4.3.22.
    Step 2:  I want to install Oracle EBS r12.2.4 single node installation on My Windows 8.1 64 bit laptop with 1 TB of HDD and 8GB RAM.
    Step 3:  Downloaded following files for single node vision appliance.
    There are two zip files for each part, so I downloaded total 16 zip files.
    V52470-01 Oracle E-Business Suite Release 12.2.4 Single Node Vision Install X86 (64 bit) (Part 1 of 8) Linux x86-64
    V52471-01 Oracle E-Business Suite Release 12.2.4 Single Node Vision Install X86 (64 bit) (Part 2 of 8) Linux x86-64
    V52472-01 Oracle E-Business Suite Release 12.2.4 Single Node Vision Install X86 (64 bit) (Part 3 of 8) Linux x86-64
    V52473-01 Oracle E-Business Suite Release 12.2.4 Single Node Vision Install X86 (64 bit) (Part 4 of 8) Linux x86-64
    V52474-01 Oracle E-Business Suite Release 12.2.4 Single Node Vision Install X86 (64 bit) (Part 5 of 8) Linux x86-64
    V52475-01 Oracle E-Business Suite Release 12.2.4 Single Node Vision Install X86 (64 bit) (Part 6 of 8) Linux x86-64
    V52476-01 Oracle E-Business Suite Release 12.2.4 Single Node Vision Install X86 (64 bit) (Part 7 of 8) Linux x86-64
    V52477-01 Oracle E-Business Suite Release 12.2.4 Single Node Vision Install X86 (64 bit) (Part 8 of 8) Linux x86-64
    Step 4:  Unzipped these files
    Step 5:  After unzip, unzipped filename looked like following.  So I removed the last digit in the extension so that Oracle virtual box can recognize .ova extension.
    Unzipped file name:
    Oracle-E-Business-Suite-12.2.4_VISION_INSTALL.ova.01
    renamed to
    01_Oracle-E-Business-Suite-12.2.4_VISION_INSTALL.ova
    Step 6. In Oracle virtual box, attempted to import these ova files using "Import Appliance".   This is when I am getting following error.
    Oracle VM Virtual Appliances for Oracle E-Business Suite (Linux)
    Failed to import appliance C:\ova\EBS\INSTALLATION OPTIONS\Option 1 Single Node ALL\0_Oracle-E-Business-Suite-12.2.4_VISION_INSTALL.ova.
    Could not create the imported medium 'C:\Users\ova\VirtualBox VMs\Oracle-E-Business-Suite-12.2.4_VISION_INSTALL\Oracle-E-Business-Suite-12.2.4_VISION_INSTALL-disk1.vmdk'.
    VMDK: Compressed image is corrupted 'C:\Users\ova\Oracle-E-Business-Suite-12.2.4_VISION_INSTALL-disk1.vmdk' (VERR_ZIP_CORRUPTED).
    Result Code:  (0x80BB0004)
    Component: Appliance
    Interface: IAppliance {3059cf9e-25c7-4f0b-9fa5-3c42e441670b}
    This is happening with each and every file in above list. 
    Please advise what am I missing?  And if there is a comprehensive document somewhere that outlines details about implementation.  The above mentioned metalink note is not enough.
    Darsh

    You need to merge all of the downloaded files first, before importing into Virtualbox. Google for my blog for detailed steps.

  • DMS BAPI_DOCUMENT_CREATE2 Class type Technical Document Category, object ty

    Hello Experts!
    The problem is that DMS import functionality stoped working after supp. pack implementation.
    The process is based on BAPI_DOCUMENT_CREATE2 functionality.
    The first problem was an error "The status set requires a previous status" which was causes dy note 1157678
    (http://wiki.sdn.sap.com/wiki/display/PLM/Error-Thestatussetrequiresapreviousstatus)
    After setting break point/de-implementing that note additional error appeared:
    "Class type Technical Document Category, object ty"
    Does anyone have idea what caused the problem, or which sap note did that? before SP19 implementation that error was not displayed.
    Current highest support package is SAPKH60403.
    Thanks in advance for help,
    Rgds,
    LB

    Hi,
    That error refers to updating characteristics for classification (addnl data tab in DIR).
    Does anyone know what could cause the problem after support pack implementation?
    Is it possible that bapi_document_create2 > api_document_maintain2 disables an option to update classification?

  • Help scanning technical documents to pdf

    Hi,
    Newbie using Acrobat 9 standard (updated to 9.1) with new Fujitsu S1500 document scanner.
    I need to scan to pdf a number of technical documents -- no color, these are white background (or, at least, should be white -- some are old and a bit discolored), mostly text and some grayscale illustrations/images and electronic schematics.
    Been playing with various options -- scanning resolutions, B&W vs Grayscale, and "Optimize Scanned PDFs" (in Acrobat 9.1) for several hours, and not making much progress.  The issue is that the scanned documents do not print out as good as the originals.
    I am hoping that some Acrobat pro's familiar with document scanning can provide some advice.
    My goals:
    1) PDF needs to print out as close to original as possible
    2) File size optimized for small size as much as possible, as some of the documents will be 100-pages and may need to be emailed.
    3) If possible, is there a way to manually clean-up the scans in Acrobat?  For example, removing the occasionally spot / mark / staple-hole that shows up in the scan.  The PDF Optimizer settings, even agressive, do  not seem to remove these marks.  Since the background of all of these documents is white, a simple way to "clear" the spots to a white backgound would be perfect.
    Any suggestions or best way to approach this project will be appreciated.  Thanks.

    100 pages of graphics is going to most likely be too large to e-mail. You would have to post them on the web for someone to grab. Sometimes grayscale seems to work better for me, but I don't do enough to know why. B&W is what I generally what I want (and it sounds like what you want), but there is typically a problem with the quality when I do it. You need to probably play with the resolution and such to get reasonable performance. I would suggest 300 dpi. After you save the file, make a copy and try OCR on it. Once the OCR is complete, do a Save as to remove the old stuff. You may then want to go back and view the suspects, correcting as you go. It may be that Acrobat also has already converted some things wrong. You will have to go back and check. Then do one more Save As.
    You might then want to save the document as a DOC file or related format. If you have equations, they will probably have to either be retyped or clipboarded from the PDF as a graphic. The OCR would hopefully give you the smallest file size. You can also try using Reduce File Size or the PDF Optimizer to reduce the file size and delete junk that is not needed.

  • Provide the list of CPU patches for r12.1.2 and r12.1.3.

    Hi,
    can you provide me the exact number of CPU patches for R12.1.2 and R12.1.3, and other recommended patches.
    thx

    Hi,
    Please see these docs/links.
    Note: 986534.1 - Oracle E-Business Suite Releases 11i and 12 Critical Patch Update Knowledge Document (July 2010)
    Note: 244040.1 - Oracle E-Business Suite Recommended Performance Patches
    Note: 950896.1 - Oracle E-Business Suite Recommended Performance Patches II
    Note: 756671.1 - Oracle Recommended Patches -- Oracle Database
    My Oracle Support > Patches & Updates > Recommended R12 Patches/Latest R12 Packs
    Thanks,
    Hussein

  • Document Title Variable Text for Footer

    I am fairly new to InDesign and did as much searching as possible before posting this. I took a three-day class for InDesign, but we never got into variables.
    This is for a technical document template I am creating. What I am trying to do is create a text variable that pulls the "Document Title" from the File Info. This variable would put the document title in the footer of every body page in my document.
    Thanks for any help!

    I took it to mean the data in the indicated field inthe XMP data below:
    You get here by choosing File Info from the File menu in ID, or you can acess it through Bridge, I presume. By default this field seems to be blank, and you get to enter anything you like into it, so it might or might not be the same as the filename (I asked earlier if it was because I hadn't done any investigation and wondered if you had).

Maybe you are looking for