Technical document template for WebDynpro application

Dear SDN Community,
Can you please tell me where can I get a Technical Document template for building a WebDynpro(Java) application.
Thanks!
Surya.

hi,
refer to Technical Specification link
Ashu

Similar Messages

Technical specification template for WebDynpro development required

Dear All,
Can you please provide any pointer to SAP provided technical specification templates for WebDynpro development.
Thanks and regards,
Sudhir

Hi Sudhir
Does that mean you got the documents you were looking for?
I too am looking for sample documents and/or templates for Technical Specification for WebDynpro (Java) Application but was not able to find any.
If you have them will you please forward them to me?
If you can share a tech spec done for a real project (or even a sample one) along with any such documents, I'd much appreciate it as I'm new to the technology. I still have to find my way around these..... :o)
Thanks in advance.

Technical Document Template for developing WD application

Dear SDN community,
Do you have any template for the technical document specific to WebDynpro(Java) development.
Thanks!
Surya.

Look at the below link.. It will help you..
Design Template for development a project in WebDynpro
Raja T
Message was edited by:
Armin Reichert

Problem in Creating Source Files (Templates) for Original Application Files

Dear Friends,
I am trying to ccreate "Source Files (Templates) for Original Application Files" . I checked the link
http://wiki.sdn.sap.com/wiki/display/PLM/Templates-Document+Management
I created a new DOc. type TMP with no statuses, checked in KPO, assigned no. ranges.
Created DIR & assigned the template file, checked into storage category. DIR no. 10000000390 created.
In Workstation application "DOX" in define templates for originals : doc. type: ZGA, application: DOX; language- EN; no - 01; In source doc- entered doc. type- TMP, doc. no.- 10000000390, part & version
Assigned for required source file copy" ZGA doc. type. -- Default Appl. as "DOX" workstation application.
Now created a DIR with ZGA doc. type, when clicking on originals , DOX prompted and clicking on "create with template" . TMP doc. 10000000390 template open in a new window. I edited & saved. close the MS word window. When comes to DIR, it prompted, Original was changed Do you want to save the original?.
clicked on yes.
Saved the ZGA DIR. When I saw the new ZGA DIR created it didn't capture. Where I went wrong ?
Regards,
Sai Krishna

Dear Ravindra,
By going this below link, it seems we can use template for creating ne wdocument & attach the same.
http://wiki.sdn.sap.com/wiki/display/PLM/Templates-Document+Management
Following messages if you read, it may be clear.
By having templates in place we can utilize the pre-defined documents instead creating right from scratch.
Entries can be done in the Template and save the document.
Templates are used for standardization and uniformity. By using templates time consumption for creation of documents will reduce as most of the details are maintained in the master template and the same can be utilize by using the template when creating documents.
If in DMS editing functionality is not there what is the use of templates- documentation?
Regards,
Sai Krishna

Functional specification and technical Specification Templates for MDM

Hi All,
I am looking for some Functional Specification and Technical Specification Templates for MDM project. If anyone have such kind of documents then please send it to me.
Please if any one have any other useful documents for MDM implementation for example, transport strategy then please also send those to my ID [email protected]
Points will be rewarded to the helpful answers.
Thanks,
Shiv.

Hi Shiv
I'd like you to refer these URLs
Re: MDM Implementation Methodology
<a href="http://hosteddocs.ittoolbox.com/RD021507b.pdf">PDF Document</a>
Regards,
Krutarth

Supporting Environment for WebDynpro applications

Hi All
Please let me clarify my doughts...
1) In local machine where all webdynpro applications stored...I mean I wnat to know path.
2) who(Developer/Administrator) will deploy the webdynpro components and what is the process to deploy webdynpro components in to SAP Enterprise portal.
3) In support environment which tools willbe used to give support for applications, which are developed using webdynpor technology.
I mean how the tickets will be handled,,I worked for some days in java, where in that environment i have used remedy tool to get tickets from the clients.
4) In local environment how can we run and deploy webdynpro applications...
5) Can we use make utility for webdypro applications as we can use for java applications..
Thanks
Seshu..

Hey Seshu
1>By default it'll be in
C:Documents and Settings<user>.dtc
2>FYI we dont deploy applications in EP, we deploy in the J2ee engine and portal just a component on top of the java engine.
An Administrator can deploy the applications developed.
or anyone can deploy applications knowing the SDM password
3> am not clear on wat tickets u spekin
4>you need to deploy once in the server and then run the application throught he url generated after deploying.
5>need more clarity..
[Still More Details|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/29fd0ec7-0301-0010-359f-9f50928528db]
regards
Harish
`

How to implement the documentation help function for webdynpro application

We have implemented SAP Travelmanagement ESS services which uses ABAP Webdynpro. In each of the screen there is a "help" link on the top right corner. I would like to know how to use this function to link a help file that explains what needs to be done on each screen.
My requirement is to provide screen specific help information as a document for each of the screen in my webdynpro application.
Any suggestions, options, samples from the experts would be most appreciated.
Regards
Vivek

Hi Vivek,
seems to be your WDA are built by FPM, thats how by default you will be getting help link in top corner.
when you click on help link it has to display the help related data.
for this sap calls the standard wdc: WDHC_COMPONENT and the view:WDHC_APPL_HELP in this view you will see the element as: TEXT to fill some text which is your help data.
there might be some way to fill this TEXT (text view) try this.
or else i will check and upate you soon.
all the best.
Regards,
Mahesh.Gattu

Error while configuring Debugging for WebDynpro Application

Hi Experts,
I am trying to configure Portal server for debugging a WebDynpro application.
In NWDS , in Debug configuration
When i tried to add my Webdynpro Project and application under Debug tab , No problem.
But when i checked J2EE Engine tab : it showed the following error.
<b>[J2EE Engine]: the selected server node does not run in restricted load balancing mode, please configure it correctly so that the URL extention can be used</b>
And ignoring it when i started debugging the application , the URL was formed like this :
http://<host>:50000/@@@DEBUG@@@7672950/webdynpro/dispatcher
/local/WDtest/WDtest?SAPtestId=1
with the error : The requested resource does not exist.
Details: Go to main page of this application!
Can anybody help me to fix the configuration.
Regards,
Ashish Shah

Hi,
To configure to the debugging mode... follow the steps:
1. Select "SDM" from J2EE engine (To get this view navigate thru Window--> Show View --> J2EE Engine)
2. Make a right click on "SDM" and choose "Enabling Debugging of Process"
3. Now, Navigate to Run --> Debug --> Select your Project as "Webdynpro Application" and click "new" button
4. Now give some name and Click BROWSE to select ur project and then click APPLY and DEBUG
Or if u use 2004s, then u can do the settings in Portal itself...which gives u more clear information... follow the link
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0cb32c5-36a7-2910-2c9b-ba4a5bbdbb56">WebDynpro Java Debug Configurator</a>
Hope it helps...
Regards / Guru

How to create a Document Template for "Scanned" PDFs? (Editing isn't necessary.)

I have a Custom Content Type called "Vendor Invoices". It is based off the "Document" Content Type. I would like to create a "Document Template" that will support "PDFs", but the PDFs should always be added via an
"upload" (since these are Invoices that we will be "receiving", there is no need to actually "Create" one). So, I don't need to support "New Document" or the "Drag and Drop" "New Document". I simply
need the users to "Upload" the documents. Although, I have created several Columns for this Content Type (Invoice Number, Invoice Date, Vendor Name, etc) that the user will input when uploading the Invoice (PDF), so I WOULD like the "Document
Information Panel" to appear. Is that only possible by using one of the Office document types?
Any thoughts or ideas on how I might accomplish this?
Thanks!
Shayne

Hi,
According to your post, my understanding is that you want to create a pdf content type.
We can use the PDF SharePoint Cumulative Update 1 to achieve this scenario, it allows you to create new PDF template and then deploy it as a Content Type.
There is an article about this topic, you can refer to it.
https://www.pdfshareforms.com/deployment-of-pdf-template-as-sandboxed-wsp-solution/
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

How to create the IView and Roles ,User for WebdynPro Application in Portal

Hi,
I have one simple webdynpro application. i want to create the user,Role and Iview for my webdynpro application in the Portal . after that i need to assign the roles to the user and i want to see the different output for each user depends upon the Role.
Can anyone give me Tutorial page(PDF) or Guide me How to do?
Thanks in Advance
Regards
Ramkumar

Hello Ramkumar,
following please find the link to available documentation in SAP Help Portal:
http://help.sap.com/saphelp_nw70/helpdata/en/42/fa080514793ee6e10000000a1553f7/frameset.htm.
Regards,
SAP AG
Gesine Raith

Callable Object for Webdynpro Application

Hello,
I have a Webdynpro for Java Application where I am importing a model from R/3 and displaying certain records......and want to include it in GP Framework....so which is the Callable Object I should use.....i tried using Webdynpro application type but it gives me the error at runtime while execution as :
Application error occurred during request processing.
Details: com.sap.tc.webdynpro.services.sal.core.DispatcherException: Failed to start deployable object sap.com/home~<webdynpro component name>
Any help would be highly appreciated.
Regards,
Anil

Hi Anil,
I am also facing a similar problem . Can you please guide how to solve it.
Thanks and Regards,
Anurag

Want to change template for an application

I made my first test application on oracle's provided platform.
I chose the template with No tabs. Now I realize I need the tabs. I dont find a way to change the template assigned to an application.
Is it really allowed or not ??
regards,
raghav..

Raghav,
If you just want to change template for that particular page, go to edit page and in the Display Attributes select the template that you want, by default its Application level default. For changing the application default template go to Home>Application Builder>Application #>Shared Components>Themes>Create/Edit Theme and there you can change the default values.
Thanks,
Manish

Quicklink for WebDynpro application

Hi everybody,
I'd like to set up a quicklink to access my WebDynpro application as I can access for example the UME (http://<server>:<port>/useradmin)
How can I build a URI like http://<server>:<port>/myApplication?
thanks in advance
regards
Jan

Hi Jan,
A quick (and dirty) workaround would be to create htm file.
the htm file will contain this:
<html>
<iframe
src="/webdynpro/dispatcher/local/<project name>/<application name>"
width="100%"
height="100%"
scrolling="auto"
frameborder="0"
>
</iframe>
</html>
put the file under
<drive>\usr\sap\<SID>\JC<InstanceNumber>\j2ee\cluster\server<No>\apps\sap.com\com.sap.engine.docs.examples\servlet_jsp\_default\root
Then, you can run your application by:
http://<server>:<port>/<file name>.htm
Omri

Banner for WebDynpro application

Hi,
How to include banner as header for my WebDynpro application?
Thanks
Siva

Hi,
I want to place an image as banner to my WebDynpro application.
Currently I have placed the image in header of group element.
When I view the screen in the browser, I am getting space between image and top of the screen.
I want to show the image at top of my screen.
Could you please suggest any solution for this/
Thanks
Siva

Context Root for WebDynPro Applications

Is it possible to give a custom context root for a WebDynPro Application?
Ex: http://localhost:50000/myapp
Thanks and Regards
Chandu

Hi,
If u r talking about Custom Controller context , it is possible.For every WD component bydefault one component controller will be there and u can create any no of custom controllers.Both r faceless entyties and work as globel resource for any views in the component.
Regards,
Srikanth Reddy.T

Technical document template for WebDynpro application

Similar Messages

Maybe you are looking for