Technical Master data replication CRM to ISU

Dear Experts,
This is regarding the replication of TECHNICAL MASTER data from CRM to ISU. I have done all the required setting and the data is replicating to ISU as well except PoD.Unable to replicate POd.Can any one suggest on this
Also while creating Service Contract in CRM every time system ask to "identify the Premise " which is not possible as i am unable to find Premise details in CRM.
Has any one faced such issue.
Regards
Hrishi
Moderator note - thread locked, no research, generic question

Hi,
Sometimes, the data can get stuck in the queues. So you need to check on it as well.
After creating the technical master data, please check whether it exist in ISU system.
Then you can check the SMQ1(Outbound queue) in ISU.
Then you can check the SMQ2 (Inbound queue) in CRM.
Also in Tcode SMW01 ( BDoc message) in CRM.

Similar Messages

Technical master data replication error

Dear Experts,
I am facing a problem with the TECHNICAL MASTER DATA replication from ISU TO CRM, Problem is I have completed the initial load of the TECHNICAL MASTER DATA load is sucessfull issue is when i am creating the NEW TECHNICAL MASTER DATA like connection object and premise they are not moving to CRM immediately every time i am doing the request load or initial load by putting the filters could you please tell me how to solve this issue.
Thanks & Regards
Boyz

Hi,
Sometimes, the data can get stuck in the queues. So you need to check on it as well.
After creating the technical master data, please check whether it exist in ISU system.
Then you can check the SMQ1(Outbound queue) in ISU.
Then you can check the SMQ2 (Inbound queue) in CRM.
Also in Tcode SMW01 ( BDoc message) in CRM.

Number range for Technical Master Data in CRM

Dear CRM experts,
I am just wondering, do we need to maintain number range for both the product type "Material" and also "IS-U Premises" (Object: ISU_TMPVST) for Technical Master Data (Connection Object and Point of Delivery) in CRM??? That will be 2 sets of number range, am i correct?
Would appreciate your reply and points will be rewarded. Thanks!!

Hi Kevin,
Thanks a lot for reply.
Our requirement and priority is to avoid redundancy of data. Due to this, we wanted to replicate minimum data to CRM system from ISU.
I went through some of the notes on market place where it is mentioned that replication of technical master data is not mandatory. We have ISU and CRM RFC connection already established, still I'm not able to view ISU technical
master objects in CRM.
Having said that, I wanted to know, if we do not replicate the technical master data (Connection Object, Premise and Device data) to CRM, can we still carry out the ISU functionalities through webclient interface? Or, am I missing any further configuration settings, to make use of technical master data in WebClient screen.
Please advise.
Regards,
MV

Creation of Tech Master data with CRM IC Web Client

Hi Experts,
I have a query regarding creation of Technical master data via CRM IC Web client ( CRM7.0 & ECC6 for ISU)
1) If we are using CRM IC web Client then , how the creation of Technical Master Data is triggered from web client ?
2) Where the technical master data created first ISU or CRM ?
If anyone has the info on this please let me know.
regards,
Sagar

Hi Sagar Arvind Phirke,
1) You need to configure CRM Middleware to exchange data between CRM and IS-U;
2) Data is created first in CRM, then it's replicated to IS-U.
Check this helpful documentation: http://help.sap.com/saphelp_crm70/helpdata/en/46/66235fc77c453a8696f76c66e8014c/frameset.htm
Best Regards,
Pedro Nunes

Is it possible to create isu technical master data using EMIGALL

Hi exports,
I ma new to emigall ,but i need to upload 1000's of master data as well as technical master data .
kindly any body provide me related isu master data upload documents other wise sugesset me step by step guidelines regarding EMIGALL for upload technical master data ..
kindly send me link if have any EMIGALL screens doc..
Thanks in advance..
Moderator note - thread locked, no research done

Post Author: swalker
CA Forum: General
yangster thanks for the quick reply. I am not really sure about combining reports, so I looked into what you said. I tried to create a shared variable on the field that I need to share but that field is a running total and I get an error when I try to run the report "This field cannot be used becaus eit must be evaluated later." So I am not sure what to do now. Is there a work around for this? Thanks for any help.

ALE distribution of HR master data to CRM - subtype CELL and MAIL

Hello,
Overview/Introduction:
we are using the ALE distribution of HR master data to CRM. The distribution has already been set up and it is running. We know that the infotype communication (0105) is especially distributing the subtypes 0010 (e-Mail) and 0020 (telephone number). This e-Mail address and the telephone number are stored in the business partner in the CRM system.
For this infotype 0105 there are also the subtypes CELL (cell phone) and MAIL (e-Mail address). Unfortunately this cell phone number and the mail address (from subtype MAIL) are not stored at the business partner in CRM.
Our request is on the one hand to store the data from subtype CELL into the field mobile number of the business partner. And on the other hand we want to store the e-mail address of subtype MAIL at the business partner instead of subtype 0010.
For some reason it seems that these requests canu2019t be setup within SAP standard.
So we found SAP note 758426 which suggests to use the BAdI HRALEX_INBOUND and the report RH_ENHANCE_BP_TEMPLATE.
Problem:
Now the problem is that the BAdI does not get called! The BAdI is active! We tried to set break points -> unfortunately did not stop! And we also implemented an endless loop in the BAdI -> even with this the system did not u2018stopu2019!?
Any ideas?
Thank you,
Roman

Hi,
First you need to create a distribution model using transaction BD64 : Edit > Model View > create.
Then you will need to maintain fields for description and technical name. In partner box you need to enter the source system (HR) and the target system (FI) in the second field. Then you need to assign a message type and filter settings if you need it. You need to create this distribution model in source system (HR).
After, still in BD64, go to environment > change partner profile or transaction WE20
Select your target system and enter the corresponding message type ( HRMD_A or HRMD_ABA depends on your scenario) with the correct customizing (receiver port, packet size, idoc type, syntax check and output mode).
Then please do the same things in your source system using WE20 for your source system and define your inbound parameters (Process code HRMD, processing by function module : use trigger immediately if it is not a production system or else trigger by background program and this case you will need to run report RBDAPP01 to process Idocs).
Once done, then go back to your model view in your source system (BD64) and go to Environment > generate partner profiles. Then please go to Edit > Model View > distribute
After all these settings done, it should work.
Please also check out documentation :
http://help.sap.com/erp2005_ehp_04/helpdata/EN/82/933b90aa9e11d6b28800508b5d5211/frameset.htm
Best Regards
Christine

Transfer of Business Partner Master data from CRM to TIBCO.

Hi All,
We intend to integrate CRM4.0 with TIBCO for transfer of Business Partner Master data from CRM to TIBCO.
Can anyone provide solution for the same. One of the think is through XI.Please correct if it is the right way to do it?.
Also, would appreciate if someone can provide documentation or links for integration.
Regards,
Mehul Shah.

Hi Rahul,
Yes you can integrate CRM and TIBCO using XI.
Check the below links
transfer the Business Partners from the CRM system to XI and to MDM.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/406efa7e-388a-2910-f9b8-81913b0ca57f
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50260ae5-5589-2910-4791-fc091d9bf797
any XI content delivered by SAP can be found in the SAP service marketplace which you can enter http://www.sap.com/services/bysubject/servsuptech/index.epx.
a) After you entered the service marketplace go to Software Download under the header SAP Support Portal.
b) Next navigate to Download -> Support Packages and Patches -> Entry by Application Group
c) In the main window select SAP Content and then Process Integration Content (XI Content).
d) Now you should see a list of XI content packages.
The package containing XI content for CRM is
XI CONTENT BBPCRM
In addition you find some packages that offer mappings from CRM interfaces to industry standards like RosettaNet or STAR standard, like
XI CONTENT ROSETTANET CRM
XI CONTENT STAR CRM
Some of these packages may require a license, therefore I am not sure if they are visible to you.
As per my knowledge, XI has CRM pre-delivered content and usually it communicates thru Proxies,Http, RFCs..
And in your scenario , you can always go for Proxy communication
Have a look into these threads
CRM and SAP XI
SAP CRM integration with XI
How to access the pre-delivered XI Integration Content for APO ,SCM or CRM
Dont forget to Reward points if this helps
Regards
Pragathi.

Error in sending HR Master data to CRM - PFAL error

HI expert ,
I am sending HR master data to CRM system through PFAL transation. I am using HRMD_ABA message type to send the data.
While executing i am getting the error like this " Internal error: Program read table idoc_structure,
command data_select_for_block, argument Z1P0002 " . I have a custom segment ZIp0002 for ci_p0002 . Can you please suggest any solution to solve this.
with regards
RKM

Hi,
An extension of an infotype should be created in segment Z1Pxxxx where all fields of E1Pxxxx and the additional fields should be inserted. The entry in T777D should have Z1Pxxxx for field Idoc segment as described in note 105148.
Please, check also note 165699.
As of Release 4.6: In the customer enhancement RHALE001, fill the function exit EXIT_SAPLRHA0_004 with the line
F_idoc_control-cimtyp = 'ZRMD_AXX'.
Where ZRMD_AXX is the enhancement/extension you created.
Regards,
Ana

Failure in the SOAP Runtime: Employee Master Data Replication Using IDoc OTM_EMPL

During employee master data replication from ECC to CfTE, we encountered the following error:
Unexpected element -el=OTM_EMPL ns=urn:sap-com:document:sap:idoc:soap:messages
We are using the 1402 WSDL for Replication of Employee Master Data with Employment Details (humancapitalmanagementmasterd2). The payload was not received in CfTE.
Can anybody please advise how to resolve this issue?
Thank you.

Dear Joselito,
This issue need deeper investigation in customer system.
Kindly report an incident for SAP Support for further help.
Regards,
Rahul Mishra

Technical Master Data Creation

Hi Experts,
Is it possible if technical master data created partially. my client requirment is to create the tech master data after the payment confirmation.
Please provide suggestions.
Regards,
Shahid

How can you receive a payment for an account if the account doesn't exist? Sometimes you have to talk to the client and explain why it cannot be done that way.
If it is just the technical master data that should not be created, then go ahead and create the business master data such as BP, and contract account. Post the charge document on the account and when the payment clears it, then create the technical master data.
If you cannot even create an account, then store everything in custom tables until the payment is received and then create everything upon confirmation. No other solution for it.

Employee master data replication error

Dear experts,
Please help on the issue, as we are doing the UAT test next week.
When doing the employee master data replication on test tenant, everything works fine, the replication status is green. But when doing the employee replication on production tenant, replication status is red, and system gives error message:
Company of employment missing for remote employee XYZ.
We check the Employee in Replication Request, and go to the Employment tab, the Company ID is missing there on PRD tenant.
But we check the table OTM_HREE_C01 on ERP PRD and Test tenant , everything looks the same, also the Configuration in report OTM_TRIGGER_EMPL_REPL_CE, everything seems to be the same there.
Could you please let us know what went wrong, and what else to check?
Thanks!
Best regards,
Wendy

Here's some things that I would check:
- Make sure idoc includes the company code for the employee <E101OTM_S_EMPL_EMPLOYMENT> <COMPANY_CODE>
- The assigned cost center of the employee must belong to the same company code this employee is assigned to.
- Review the company code set-up to make sure it is complete
- The communication arrangement to make sure it is complete

Datasource for Master Data in CRM

Hi CRM Gurus,
I am working in a CRM-BW integration project. I wanted to know the list of relevant Datasources for Master data in CRM side for which i have to load data in BW side for the Opportunity Cube and Activity Cube.
Also want the list of Datasources for Master Data for Business Partner and Product in CRM system and the relevant Infoobjects(Master Data) in BW side.
Full points will be awarded. Eagerly Awaiting for your help.
Regards
Vishwanath

Hi,
The datasources are:
Opportunity - 0CRM_OPPT_H - Opportunities header
0CRM_OPPT_I - Opportunities Items
Activities - 0CRM_SALES_ACT_1 - Activities
Master data -
0CRM_OPPT_CYCLE_TEXT
0CRM_OPPT_PHASE_TEXT
0CRM_OPPT_TYPE_TEXT
Business Partner
0CRM_BPART_ATTR
0CRM_BPART_TEXT
Products
0CRM_PRODSL_ATTR
0CRM_PROD_ATTR
0CRM_PROD_HIER
0CRM_PROD_IDCMP_TEXT
0CRM_PROD_TEXT
0CRM_PROD_TYPE_TEXT
These are indicative. Do a proper business blueprinting for all your needs.

Master data replication from R3 to CRM

i have pulled the master data from R3 to CRM .data is showing in table but000 and crmm_but_custno but it is not showing in the BP transection.
when i am searching in BP it is not showing but i can see in the table(but000 and crmm_but_custno)
What should i have to do .
Pl suggest !!!!

Hi sunil,
while searching for data in BUT000 are you searching based on BP number or content of the table? At the same time while searching with TCODE - BP on what basis you are searching?
If the data is replicated into the BUT000 it should come out with the T-Code BP also. For your problem there will be 2 possibilites.
1) the data is not at all replicated and you may looking at the old data.
2) Due to improper number ranges for R/3 and CRM eventhough the data is replicatd into CRM you can't find it because it taken some other number range.
For ex: you have created a Customer in R/3 i.e 5000456, when replicated it will take some othe number XXXXXX.
So, while searching with BP T-Code search data on the basis of first name, last name or searchterm instead of BP number.

Problem in replication of HR Master Data to CRM

Hi All,
I am working on ECC 6.0 and CRM 7.0 systems.
I have made all the configurations for replicating HR Master Data from HCM( or HR module in ECC) system to CRM as per the best practices. We have maintianed the Organisation Structure only in HR module and not in ECC and we are trying to replicate the same to CRM system. For the Organsiation structure we have maintained different number ranges for all Company Codes as per the requirement.
I need to know how the number ranges are to be maintained in CRM side in BUCF transaction in order to replicate the Org. Unit with the same number in CRM.
My problem is that for the first Company Code say 1200 we are getting the O S P replicated btu when I try the same for other company codes I am getting Success Idocs but BP is not getting created when synching HR data via report HRALXSYNC.
Also suggest whether we need to maintain the same structure as in ECC HR system in HR switches in SM30 (Table T77s0).
Regards
Kshitij

Hi ,
Have you made checks related to HRALX in t77s0 table as those are mandatory for integrating ECC and CRM integration.
checks like HRALX-OBPON, HRALX-PBPON etc.
Thanks
Sonia

Customer master data replication probelm from ECC to CRM system.?

Hi..Gurus,
Intial downloading was done for master data and transaction data..but after 10 days.. some changes in ECC system will not replicate to CRM system..delta down loading working or not how i can check ? or i have again do the intial downloading for customer_main..plz help me..?
Truly,
San Rao.

Hi,
make sure that the Middleware is activated in R/3 table TBE11 for
application component BC-MID as below:
Application ID Active Text
BC-MID X Middleware
Also, in R/3 table TBE31 make sure the following even has been activated
00001321 BC-MID PI_BP_CUSTOMER_BTE_1321
In R/3 table CRMRFCPAR make sure that the delta load has not been
deactivated for the object Customer_Main....
If this is ok check filter on the object Customer_Main in trx. R3AC1 in
CRM to make sure they havent filtered out the relevent BP's
If you have a BP expample use CRM trx. CRMM_BUPA_MAP to gather the BP
from R/3 into CRM...this will either lead to a sysfail in CRM SMQ2 or
A short dump in ST22 if there are any errors...
Also, after using trx. "CRMM_BUPA_MAP" check in SMw01 for Bupa_Main
bdocs...if there are errors they will norally be on the validation of
the BP in CRM and the bdocs will have errors...
Regards, Gerhard

Technical Master data replication CRM to ISU

Similar Messages

Maybe you are looking for