Technical monitoring of SRM system

Hi,
I would like to get a list of components to monitor in an SRM system. This is so that we can do weekly checks on the system to ascertain its health. For e.g. I should check whether IPC is up, similarly IGS, Integrated ITS, etc. etc.
Is there a standard template available for this?
Regards,
Sanket

Hi Sanket,
I don't know if it still helps, but there is a Best Practice document for technical monitoring of SRM. It concerns monitoring of EBP, ITS (standalone), IPC, Business Connector, Requisite Catalog, J2EE Engine as well as configuration of the engines, agents, etc.
Unfortunately, it doesn't say anything about monitoring the integrated ITS...
You can find it at https://service.sap.com/~sapidb/011000358700007362432002E
Just in case you're still looking for it.
Matthias

Similar Messages

Technical Monitoring one template used for production and non-production system.

Dear All,
Is there a way to have one template in Solman Technical Monitoring for production system and non-production system with different alerts ? For example if it exceeds a threshold for production system it will trigger red alert or set automatically an incident and if it's non prod system it will go to yellow warning alert ?
Regards
Lukasz Goral

Hi Likasz,
You first create and customize the template, and then assign to a system.
If it was selecting a system and then customizing a template, then may be such functionality makes sense.
So, I don't think that is possible.
Better would be copy the template used for production to non-production and make the adjustment to it.
Regards,
Divyanshu

ABAP Central Service not available alert in Technical Monitoring

Hi Gurus,
Need help with this alert which i am getting from Solman 7.1 SP10.
ABAP Message Server Status
XXX-ABAP
3
3
3
No process found for: msg_server(.*)
I have already checked following notes but no luck
1419603 - Missing ABAP SAP Central Services (ASCS) instance in SLD/LMDB
1916237 - ABAP Central Service not available alert in Technical Monitoring
Our managed system kernel is 720 P 401 as per-requisites for the sld registration.
Have tried few things here and there but no luck.
Please suggest is any has any suggestion or solution.
Dev

Hi Roland,
I followed the note 1717846 and performed all the steps successfully.. But still no luck with ASCS in SLD.
Any ideas or suggestions .?
Attaching the logs for your reference:
Tue Apr 15 15:52:23 2014 Parsing XML document.
Tue Apr 15 15:52:23 2014 Supplier Name: BCControlInstance
Tue Apr 15 15:52:23 2014 Supplier Version: 1.0
Tue Apr 15 15:52:23 2014 Supplier Vendor:
Tue Apr 15 15:52:23 2014 CIM Model Version: 1.5.29
Tue Apr 15 15:52:23 2014 Using destination file '/usr/sap/XXX/SYS/global/slddest.cfg'.
Tue Apr 15 15:52:23 2014 Use binary key file '/usr/sap/XXX/SYS/global/slddest.cfg.key' for data decryption
Tue Apr 15 15:52:23 2014 Use encryted destination file '/usr/sap/XXX/SYS/global/slddest.cfg' as data source
Tue Apr 15 15:52:23 2014 HTTP trace: false
Tue Apr 15 15:52:23 2014 Data trace: false
Tue Apr 15 15:52:23 2014 Using destination file '/usr/sap/XXX/SYS/global/slddest.cfg'.
Tue Apr 15 15:52:23 2014 Use binary key file '/usr/sap/XXX/SYS/global/slddest.cfg.key' for data decryption
Tue Apr 15 15:52:23 2014 Use encryted destination file '/usr/sap/xXX/SYS/global/slddest.cfg' as data source
Tue Apr 15 15:52:23 2014 ******************************
Tue Apr 15 15:52:23 2014 *** Start SLD Registration ***
Tue Apr 15 15:52:23 2014 ******************************
Tue Apr 15 15:52:23 2014 HTTP open timeout = 420 sec
Tue Apr 15 15:52:23 2014 HTTP send timeout = 420 sec
Tue Apr 15 15:52:23 2014 HTTP response timeout = 420 sec
Tue Apr 15 15:52:23 2014 Used URL: http://sapr6bv:51600/sld/ds
Tue Apr 15 15:52:23 2014 HTTP open status: true - NI RC=1
Tue Apr 15 15:52:23 2014 HTTP send successful.
Tue Apr 15 15:52:23 2014 Return code: 200 --- Return message: (OK)
Tue Apr 15 15:52:23 2014 HTTP response: Success. HTTP status code: 200
Tue Apr 15 15:52:23 2014 ****************************
Tue Apr 15 15:52:23 2014 *** End SLD Registration ***
Tue Apr 15 15:52:23 2014 ****************************

SOLMAN 7.1 Technical Monitoring - System Monitoring - Host Grey

Hi All,
Wondering why my host monitoring in system monitoring is greyed out? I managed to get Technical Systems, Database and others work well but not Host Monitoring.
I checked SAPHOSTAGENT is running fine, DAA and wily as well. Also, all updated to latest version. Template assigned to Host monitoring as well. All troubleshooting and logs leaves no clue.
Any idea as i've run out of ideas.....
Cheers,
Nicholas Chang

Hi Roland,
I did check and below are what it returns:
Configuration XML 7.01.01.20120305075238 did not reach the agent. Agent XML:
No measured values have been reported by data provider.
No measured values were ever calculated.
However, when i click on the "FIX" icon, nothing appears........
I've changed the metric for "Host" managed object, assign and activate, rerun technical monitoring setting.
i dont find any useful thread on SDN nor SMP. I've drill to landscape browser, agent log, daa log, extractor and etc but to no avail. However, i did get host info on Wily and E2E.... just wondering???
Any clues?
Thanks,
Nicholas Chang

Technical monitoring system status is showing grey

Hello experts,
I have sucessfully configured Managed system and techincal monitoring for one your system.
But i am nto able to see alerts and system staus is Grey for all the tabs.
Attached is the screen shot of system SBI which newly configured.
Please let me know which action is required to resolve this error. Your response is higly appreciated.
Thanks and Regrads
Ravi Pandey

Hi Ravi,
Please check this note.
1819848 - All metrics are grey in Technical Monitoring
2016745 - Grey metrics information required for analysis in technical monitoring with SAP Solution Manager 7.1
Also execute TCODE MAI_TOOLS on solman and refer SAP Note 2016745 for more info on inputs.
Regards,
Divyanshu

Technical Monitoring -SLT System - No Metrices delivered

Dear Experts,
I have configured Technical Montoring for SLT system in our landscape .
But still i could not find few metrics collecting data . It shows as no metrics delivered .
Attachment has details about the metrics .
Please help me to fix the issue and let me know for further details .
Regards
Bala

Hi Balamurugan,
The solution for this kind of issues are different and not fixed solutions.But please check below points to make sure you have covered all steps.
1)LMDB landscap verfication should green for managed system.
2)Managed system setup should be green .
3)In technical monitoring setup make sure you assign all templates which is valide for your managed system software components.
4)After TechMon activation check managed system extractors in "Extractors Framework" administration and make sure all extrator in active and last runs are green.
Thanks,
Prakash

Technical Monitoring for Logical host name

Dear experts,
We are in mid of technical monitoring finalisation.
one of the interesting thing which i found with respect to the logical host name, we installed SMD agent on Virtual host name and our system is not with HA environment and no clustering. It is just a system with single instance.
During the managed system configuration all the physical and logical host name reported by SMD autodiscovery, all went fine. But in Technical monitoring shows only virtual host name with the updated alerts , and logical host name only shows grey alert.
virtual host shows alert here
logical host name shows grey
how can i get alert displayed for logical host name too? do i need to do some settings at the OS level , could you guide us?
Thanks
Jansi

Hi Giri Raju Ayyagari,
I am sorry, seems you are still not able to get my issue, moreover you get diverting my issue
Here the problem is not at all related to agents on fly. thats the separate topic.
We are having issue on Logical Host names where there is no HA environment, means only One logical host name created.
I raised to SAP, l will update once the update from SAP given.
Best regards
Jansi

CCMS monitoring of SRM's own XI integration engine

I have CCMS problems when monitoring XI integration engine of a SRM system. The integration engine will not appear in CCMS. I opened a question on SRM solution forum, could somebody have a look at it there. Here is the link to original question and earn your points there:
CCMS monitoring of SRM's own XI integration engine
background: I have previously managed to successfully set up CCMS monitoring for a plain XI system, but there seem to be some difference while SRM's XI only has integration engine and not J2EE engine running. SRM XI Integration engine is in place due to ABAP Proxies used by SRM.
best regards,
Kimmo

You have to follow the note <a href="https://websmp110.sap-ag.de/~form/handler?_APP=00200682500000002442&_EVENT=DISPLAY&_OBJECT=012006153200000552232003&_NNUM=634771&_NLANG=EN">634771</a>
and following this document <a href="https://websmp110.sap-ag.de/~sapdownload/011000358700004422742005E/XIMonitoringHowTo_01aSR.pdf">How To Monitor Exchange Infrastructure 3.0</a> pay attention to page 34, for the use of a Central Monitoring (CEN) System.
Of course you have to adjust the GRMG in order to have only the ABAP part under monitor.
Best Regards

Technical Monitoring - DBA Connection red (failure)

Hi experts,
I have the following problem.
In technical monitoring I have one managed system, on which the DB availability check is not working.
The DB is a Sybase ASE 15.7
In solman_setup->system config the DB connection is configured well (green status).
Also if I open the dbacockpit of solution manager, I can see the DB of the managed system and the connection checks are working fine.
But in technical monitoring, I get the alert that the DB is not available and also that "DBA Cokcpit Connection Status" = failure.
If I go to the details of the alert, I also can't see the problem.
I did already remove and add the system more often. Further I also did remove the connection in dbacockcpit and created it again.
But now I don't have any further ideas.
Hopefuly somebody can help me.
Thank you

Hi Christian,
1st let us find the error related to this.
Follow below KBA to find out the error that is causing the issue.
2016715 - Metric Troubleshoot using MAI Tools
Since, you are motioning a remote ASE database, make sure the below KBA is read and applied.
1532253 - SYB: Remote DB Monitoring for SAP Sybase ASE
Regards,

Integrate nagios with sap solution manager technical monitoring

Hello,
We are using nagios to gather the alert from the CCMS of the solution manager 7.1.
Recently we start using the Sybase ASE DB 15.6 and 16 on SAP solution manager and Business suite. As the CCMS is not provided to monitor Sybaseand the only way to check sybase info is through the dbacockpit and the technical monitoring I would like to know if a concection is possible between nagios and the system monitoring in Solution manager so we can gather the needed monitoring informations.
Best regards,
Hassan khanafer

Hi,
As far as I know there is no standard way of doing this at the moment.
Take a look at using the non-SAP monitoring using OS Scripts as described
below:
http://wiki.scn.sap.com/wiki/download/attachments/355894795/Non-SAP%20Monitoring%20using%20OS%20Scripts.pdf?api=v2
Kind regards,
Roland

What are the main points to freeze technical scenario in SRM?VeryUrgent Pls

Hi SRM Guruu2019s,
What are the main points to freeze technical scenario in SRM?.
Please mention main points to select Classic Scenario and Extended Classic scenario individually.
I would really appreciate.
Regards,
John.
Edited by: johnmiller465 on Nov 12, 2009 3:30 PM

i believe what is your PPS version / SRM version
generally PPS works on EXtended Classic
http://wiki.sdn.sap.com/wiki/display/SRM/PPS-ProcurementforPublicSector-+enhancements#PPS-ProcurementforPublicSector-enhancements-PPSprocessisbasedinExtendedClassicscenario
Procurement for Public Sector - PPS1.0: An Overview
Ralf Wolfgang Geithner
Business Card
Company: SAP AG
Posted on Nov. 20, 2007 11:57 AM in Public Sector Subscribe
Print
Permalink
Introduction:
SAP PPS1.0 is an addon to SAP SRM5.0 addressing requirements of public sector procurement. SAP SRM is used as functional frontend to support the main procurement processes:
Public tendering
Awarding
Contract negotiation
Purchase order creation
SAP PPS1.0 has been designed to work in the extended classic scenario, where SAP ERP 2004 functions as backend supporting the processes:
Sales Order processing
Purchase Requisition processing
Goods Receipt processing
Invoice Receipt processing
Main Features:
PPS 1.0 features a couple of unique functions designed for the needs of public sector customers, namely:
Document Builder Integration
Records Management Integration
Smart document numbering
Funds Management integration
Acceptance at Origin
Central Contractor Registration (CCR)
Contract Tracking and Monitoring
Close Out Execution
Enhanced Versioning
FPDS Reporting
Guaranteed Minimum
Maximum Quantity per Period
Public Sector User Status
Reason Codes for Document Changes
Smart numbering of procurement documents
Selective Release
Sourcing Priorization
In the next couple of blog posts I want to describe the different features and give some guidelines for the implementation of the functionality.
What Next?
I plan to start with the smart numbering which is called as well "long procurement number"
Ralf Wolfgang Geithner is Senior Developer in Procurement for Public Sector core team

Can we use both Stand alone and Extended classic in one SRM system

Hi All,
Our client is now using Stand alone SRM system with back-end R/3 FI-CO system. Now they want to go Extended classic scenario for few product categories.
         Would it be possible to use both in one SRM system? If possible could you please provide what are the sequential steps to do this?
             Thanks in advance.
Regards,
Ram

Hi Ramesh,
How did you end up solving your problem, as i have the same scenario. Did you use this BADI (
SRM Server->Business Add-Ins->Control Extended Classic Scenario->Activate Extended Classic Scenario)? Based on my reading, it seems this BADI is relevant to switch between extended classic and classic scenarios.
From what i understand, we can control the standalone scenario via the define backend system configuration (SAP SRM -> SRM Server -> Technical Basic Settings -> Define Backend System for Product Category). In my scenario, I have one set of product categories, so i will likely need to implement this BADI (BBP_DETERMINE_LOGSYS, method:   DETERMINE_LOGSYS - SAP SRM -> SRM Server -> Business Add-Ins ->Shopping Carts and Requirement Items -> Determine Backend System / Company Code) in order to determine the correct backend system based on company/plant for example.
Did you then leave the extended classic scenario activated (IMG --> Supplier Relationship Management -> SRM Server-> Cross-Application Basic Settings->
Activate Extended Classic Scenario)?
Or how did you achieve both standalone and extended classic using one SRM server?
cheers,
AD

2 Srm Systems connected to 1 R/3 system is it possible

Hi friends,
I was looking into a situation where you would have 2 SRM systems pointing to 1 backend R/3 system. I<b> dont believe its possible.</b>
I believe you can have 1 SRM pointing to multiple backend systems, this is do-able.....
cheers
alex

It is possible that there can be multiple SRM system connected to 1 R/3 system...You need to setup on...IMG>SRM->SRM Server->Technical Basic Settings>Define Backend System-> There you need to provide Logical System/Description/RFC Distination and Sys Type.
I hope it clarifies your issue.

Is SAP-OSS RFC Configuration required for Technical Monitoring ?

Hi Experts,
I have not configured the SAP-OSS rfc connection.Is it required for setting up the technical monitoring(Tcode : SOLMAN_SETUP).
If Yes can you please help me in solving the above problem.Our aim is to configure technical monitoring for system and self-monitoring.
Thanks In Advance,
Satheesh E

Hello,
I am assuming you are speaking about 100 concurrent users and not the entire company userbase.
Core i5 (although is dual core underneath) is generally meant for desktops, having said this, please note that its difficult to arrive at any recommendation based on simply userbase. You need to have more data with you with respect to amount of transactions, concurrent users, peak period, load during peak period etc.
You need to use SAP's quicksizer to calculate the amount of SAPS for your production servers, SAPS is the unit used to calibrate your hardware for running SAP Applications.
If you provide your SAPS value to hardware vendor, they will advise what CPU rating and how many CPUs you need. They will infact tell you the entire configuration that you need.
you can also buy the following book:
http://www.sap-press.com/products/Sizing-SAP-Systems.html
Regards,
Siddhesh

Technical monitoring SAP ERP 6.0 NW 7.0 SP 28 in Solman 7.1 SP10

Dear All,
Solution manager 7.1 with SP 10.
Added manged system SAP ERP 6.0 NW 7.0 SP 28.
completed managed system and technical monitoring.
But still not getting system in Technical monitoring -> system monitoring work center.
Regards,
Nikunj Thaker

Hi Nikunj,
Please check following:
1831983 - How to display dashboards from SolMan 7.1 SP05;
http://servcie.sap.com/rkt-solman > SAP Solution Manager 7.0 > Technology Consultant & System Administrator > System Monitoring / Administration
www.service.sap.com/slr -> Service Level Reporting
www.service.sap.com/ewa -> EarlyWatch Alert
Here it is described how to activate such reportings.
1909531 - Metrics in Interactive Reporting - Solution Manager 7.1
All those points are covered by the ALM Reporting dashboard and other
dashboards which are mentioned in 1831983 (and the SAP
Documentation) which was already provided in this message. Please also
check following notes:
1862024 - ALM Dashboards not showing any information
1570399 - Solution Manager BI reporting
Thanks
Vikram

Technical monitoring of SRM system

Similar Messages

Maybe you are looking for