Technical monitoring SAP ERP 6.0 NW 7.0 SP 28 in Solman 7.1 SP10

Dear All,
Solution manager 7.1 with SP 10.
Added manged system SAP ERP 6.0 NW 7.0 SP 28.
completed managed system and technical monitoring.
But still not getting system in Technical monitoring -> system monitoring work center.
Regards,
Nikunj Thaker

Hi Nikunj,
Please check following:
1831983 - How to display dashboards from SolMan 7.1 SP05;
http://servcie.sap.com/rkt-solman > SAP Solution Manager 7.0 > Technology Consultant & System Administrator > System Monitoring / Administration
www.service.sap.com/slr -> Service Level Reporting
www.service.sap.com/ewa -> EarlyWatch Alert
Here it is described how to activate such reportings.
1909531 - Metrics in Interactive Reporting - Solution Manager 7.1
All those points are covered by the ALM Reporting dashboard and other
dashboards which are mentioned in 1831983 (and the SAP
Documentation) which was already provided in this message. Please also
check following notes:
1862024 - ALM Dashboards not showing any information
1570399 - Solution Manager BI reporting
Thanks
Vikram

Similar Messages

Monitoring Status is Still Gray [Not Performed] When Technical Monitoring Setup DOne

Dear SAP Expert,
I have problem when setup technical monitoring SAP system through t-code SOLMAN_SETUP in Solman.
Managed system configuration (satellite system) was configured with green indicator for all steps.
Technical monitoring (system monitoring) steps were configured also with green indicator for all steps.
After configure technical monitoring, i found the status of monitoring status for that satellite system still gray (not performed).
And after 2 day the status is not changed yet to another indicator.
There is no problem with network firewall and server firewall.
Is there anyone of you have experience to solve this problem?
Please help me to solve this problem.
Thanks & regards,
Husin.

Hi Husin,
If the status is still grey please re-execute the steps mentioned in SAP note 1819848 - All metrics are grey in Technical Monitoring to see if this helps.
Kind regards,
Roland

Integrate nagios with sap solution manager technical monitoring

Hello,
We are using nagios to gather the alert from the CCMS of the solution manager 7.1.
Recently we start using the Sybase ASE DB 15.6 and 16 on SAP solution manager and Business suite. As the CCMS is not provided to monitor Sybaseand the only way to check sybase info is through the dbacockpit and the technical monitoring I would like to know if a concection is possible between nagios and the system monitoring in Solution manager so we can gather the needed monitoring informations.
Best regards,
Hassan khanafer

Hi,
As far as I know there is no standard way of doing this at the moment.
Take a look at using the non-SAP monitoring using OS Scripts as described
below:
http://wiki.scn.sap.com/wiki/download/attachments/355894795/Non-SAP%20Monitoring%20using%20OS%20Scripts.pdf?api=v2
Kind regards,
Roland

Technical Usage for SAP ERP 6.0 EhP4

Hello gurus,
I am planning to upgrde my system EC2 which is an SAP ERP 6.0 on an Oracle10g database with OS Windows Server 2003.
But I dont know which technical usage to choose.
Using the url http://<hostname>:5<instance number>00/utl/UsageTypesInfo, the following are my system's usage types:
SAP ERP 2005/SR2     XSS     XSS     Self Services
SAP ERP 2005/SR2     LSOCP     LSOCP     Learning Solution Content Player
SAP ERP 2005/SR2     BD     BD     Biller Direct
SAP ERP 2005/SR2     XECO     XECO     Extended E-Selling Components
SAP ERP 2005/SR2     ECC     ECC     Central Component
SAP ERP 2005/SR2     BP-ERP     BP ERP     Business Packages (Portal Content)
SAP NetWeaver 2004s/SR2     PI     PI     Process Integration
SAP NetWeaver 2004s/SR2     BI     BI Java     BI Java
SAP NetWeaver 2004s/SR2     AS     AS Java     Application Server Java
SAP NetWeaver 2004s/SR2     EPC     EP Core     Enterprise Portal Core Components
SAP NetWeaver 2004s/SR2     EP     EP     Enterprise Portal
SAP NetWeaver 2004s/SR2     AAS     AS ABAP     Application Server ABAP
There seems to be no direct equivalent of these usage types in the technical usages I see on MOPZ.
Please advise.
Thanks, Cha Cha

Hello,
You may check the attachments in note 1165438 for business function -> technical usage equivalence.
as for usage types, you seem to have listed product instances instead. Perhaps you can also have a look at the product instances -> technical usages equivalences in the attachments to note 1165438
Anyway, the technical usagesI can see right away are:
- SAP Learning Sol-Frontend CP
- XSS Self Services
- SAP FSCM - Biller Direct
- Central applications
- SAP XECO
Netweaver 7 app server ABAP, Netweaver PI, and Enterprise Portal product instances don't have any additional technical usages assigned.
I suggest also the service http://service.sap.com/bfp for a free service that will help you to select technical usages in your EHP4 install.
Best regards,
Miguel Ariñ

Is SAP-OSS RFC Configuration required for Technical Monitoring ?

Hi Experts,
I have not configured the SAP-OSS rfc connection.Is it required for setting up the technical monitoring(Tcode : SOLMAN_SETUP).
If Yes can you please help me in solving the above problem.Our aim is to configure technical monitoring for system and self-monitoring.
Thanks In Advance,
Satheesh E

Hello,
I am assuming you are speaking about 100 concurrent users and not the entire company userbase.
Core i5 (although is dual core underneath) is generally meant for desktops, having said this, please note that its difficult to arrive at any recommendation based on simply userbase. You need to have more data with you with respect to amount of transactions, concurrent users, peak period, load during peak period etc.
You need to use SAP's quicksizer to calculate the amount of SAPS for your production servers, SAPS is the unit used to calibrate your hardware for running SAP Applications.
If you provide your SAPS value to hardware vendor, they will advise what CPU rating and how many CPUs you need. They will infact tell you the entire configuration that you need.
you can also buy the following book:
http://www.sap-press.com/products/Sizing-SAP-Systems.html
Regards,
Siddhesh

SAP ERP (Logistics) IT Process monitoring KPI's

Dear all,
I have to come up with the KPI's to monitor SAP Processes (Especially logistic processes) from IT perspective. I present you with two possible scenarios for a more clear picture.
One is that an ERP system is launched at a new location (Here you have to monitor that if the tool is in use after implementation)
The second situation is that, it has been quite some time since the implementation of tool (Here you have to monitor if all the defined processes are being followed for example every order from purchase order to delivery is processed in the system and there is no manual work or violation of proper procedure ).
The problem is to separate the Logistics processes from IT processes. The aim is to develop KPI's that purely monitor effective use of SAP ERP from IT's perspective.
I would like you to recommend me some reference material or the ideas that can help me to find the right solution.
thank you very much in advance and kind regards.

Hi Sanjeev,
>
Sanjeev Kumar Kedarshetty wrote:
> Hi,
>
> Thanks for your input, but this is not really what I am searching for. I am searching for how many entires are totally inserted into a table in a day.
> Sanjeev.
On SAP level we have some stats like nr. of changes per table... .
On DB02 you can analyze how much space a table allocates...
On database level (e.g. on ORACLE) one can analyze the nr. of INSERTS / UPDATES / DELETES per table... .
And the database statistics will not help as well since they are not updated daily...
If you really need that information you have to do something on your own.... .
Kind regards,
Hermann

Technical Monitoring - Connect DB Oracle (Error)

Hi experts,
I would like to connect a database of an ERP System to our technical monitoring.
Therefore I go in SOLMAN_SETUP->Managed Systemconfiguration to step 5 - "Enter System Parameters".
Here I enter in "DB-Parameters" the following data:
Database Host: "DB Host"
Service Name: "DB SID"
Port Number: 1527 (where can I check this???)
TNS Name: "DB SID"
Character Set: ????
National Character Set: ????
Username: ora<sid>
password: ****
But on clicking on "Setup DBA Cockpit connection" I get the following error:
"The connection "<sid>" is not set up correctly. Database connection <sid>:ADBC error "Internal error 16 has occured"".
Does anybody know help on this?
Thank you

Hello Roland,
thats the output in the process, it seems, as I need to install oracle libraries???
B Loading DB library '/usr/sap/<sid>/DVEBMGS<sidno>/exe/dboraslib.so' ...
M *** ERROR => DlLoadLib()==DLENOACCESS - dlopen("/usr/sap/<sid>/DVEBMGS<sidno>/exe/dboraslib.so") FAILED
"Unable to find library 'libclntsh.so.11.1'." [dlux.c       445]
M {root-id=0017A47714101EE484B22C1661F85404}_{conn-id=0017A47714101EE484B2285550A0110C}_1
B *** ERROR => Couldn't load library '/usr/sap/<sid>/DVEBMGS<sidno>/exe/dboraslib.so'
[dbcon.c      5767]
B {root-id=0017A47714101EE484B22C1661F85404}_{conn-id=0017A47714101EE484B2285550A0110C}_1
B ***LOG BYG=> could not load library for database connection <db sid>        [dbds         862]
B ***LOG BZY=> unexpected return code 8192       calling DBDS       [dbacds       1862]
B Loading DB library '/usr/sap/<sid>/DVEBMGS<sidno>/exe/dboraslib.so' ...
M *** ERROR => DlLoadLib()==DLENOACCESS - dlopen("/usr/sap/<sid>/DVEBMGS<sidno>/exe/dboraslib.so") FAILED
"Unable to find library 'libclntsh.so.11.1'." [dlux.c       445]
M {root-id=0017A47714101EE484B22C1661F85404}_{conn-id=0017A47714101EE484B2285550A0110C}_1
B *** ERROR => Couldn't load library '/usr/sap/<sid>/DVEBMGS<sidno>/exe/dboraslib.so'
[dbcon.c      5767]
B {root-id=0017A47714101EE484B22C1661F85404}_{conn-id=0017A47714101EE484B2285550A0110C}_1
B ***LOG BYG=> could not load library for database connection <dbsid>        [dbds         862]
B ***LOG BZY=> unexpected return code 8192       calling DBDS       [dbacds       1862]
B Loading DB library '/usr/sap/<sid>/DVEBMGS<sidno>/exe/dboraslib.so' ...
M *** ERROR => DlLoadLib()==DLENOACCESS - dlopen("/usr/sap/<sid>/DVEBMGS<sidno>/exe/dboraslib.so") FAILED
"Unable to find library 'libclntsh.so.11.1'." [dlux.c       445]
M {root-id=0017A47714101EE484B22C1661F85404}_{conn-id=0017A47714101EE484B2285550A0110C}_1
B *** ERROR => Couldn't load library '/usr/sap/<sid>/DVEBMGS<sidno>/exe/dboraslib.so'

Curiosity about the level of load on SAP ERP systems

Hello all,
In my company, I'm in charge of the SAP capacity planning and so, every month, I fill several Excel sheets to follow the load of our systems.
I am curious to know if our load is similar to that of other SAP ERP customers.
I would be happy if some of you would like to post their monthly load statistics for R/3 or ECC systems.
Of course, I begin :
Production R/3 4.7 ext2 system, main modules SD and MM.
460 declared users, average 110 concurrent users
1 Win 2003 MSCS itanium cluster with 5 win 2000 32 bit app servers.
stats for November :
Thousands of steps
TOTAL :            22 500
Dialog :                 797
Background :        459
RFC :                4 439
UPD and UP2 : 14 418
HTTP :                  523
Average dialog step response time : 548 ms
Database size : 1.1 To
The load evolution of the system is
always increasing
stable for dialog steps (sapgui)
more and more external RFC calls
more and more web services calls
The system is less and less a transactional system and more and more a backoffice system executing services calls.
Thanks to all who will be interested to share this load information.
Regards,
Olivier

We are a manufacturing company and we have a lot of batch processing (MRP et al).
Yes - the systems are pretty big
DB-Server/CI: 4 x DualCore Opteron - 48 GB Memory (ENQ, BTC)
AppServer: 4 x Opteron 48 GB Memory
From a technical point of view we wouldn´t need the application server, the DB server could handle that load too.
The main requirement we have is, that the avg. reponse time in VA01 for each line item is below 450 ms everywhere on the world (China, Poland, Russia) on those remote locations - the system is in Germany - so we are trying to make sure, that the main time consumed on the box itself is rather small because of not always reliant network connections to the east part of the world (actually VPN). 1/3 - 1/2 of the actual avg. reponse time is consumed for network transmission.
On top of that we have about 550 printers defined because we print everything, that is related to the business process out of this SAP system which will also consume quite a bit of network speed/bandwith.
Our users are pretty much "regaled" with response time, on days, where the avg. time is increasing 100 ms, we get a LOT of calls because of a slow system. The benchmark assumed 2 seconds are unacceptable for our users thus it may appear, that the boxes are oversized but we need that power to ensure the speed.
Markus

Where do I set the polling frequency for Technical monitoring in Solution Manager 7.1 SP10 ??

Hi All,
I am customizing my technical monitoring templates and would like to know :
1. Where we can set the polling frequency for each metrics for triggering alerts through Technical monitoring in Solution Manager 7.1 SP10 ??
2. Is it like each time our threshold is breached, it will send an alert irrespective of polling frequency ??
I know the data collection interval time for each metrics in technical monitoring template but the as per my observation the polling frequency is different.
Need your guidance.
Regards,
Manish K

Hi Javier,
Refer to the documentation 'MAI Alert Consumer BAdI Interface' under
http://wiki.scn.sap.com/wiki/display/TechOps/Alert+Consumer+BAdI+Interface link for information on the input to the BAdI.
Kind regards,
Roland

Technical Monitoring for Logical host name

Dear experts,
We are in mid of technical monitoring finalisation.
one of the interesting thing which i found with respect to the logical host name, we installed SMD agent on Virtual host name and our system is not with HA environment and no clustering. It is just a system with single instance.
During the managed system configuration all the physical and logical host name reported by SMD autodiscovery, all went fine. But in Technical monitoring shows only virtual host name with the updated alerts , and logical host name only shows grey alert.
virtual host shows alert here
logical host name shows grey
how can i get alert displayed for logical host name too? do i need to do some settings at the OS level , could you guide us?
Thanks
Jansi

Hi Giri Raju Ayyagari,
I am sorry, seems you are still not able to get my issue, moreover you get diverting my issue
Here the problem is not at all related to agents on fly. thats the separate topic.
We are having issue on Logical Host names where there is no HA environment, means only One logical host name created.
I raised to SAP, l will update once the update from SAP given.
Best regards
Jansi

Technical Monitoring - DBA Connection red (failure)

Hi experts,
I have the following problem.
In technical monitoring I have one managed system, on which the DB availability check is not working.
The DB is a Sybase ASE 15.7
In solman_setup->system config the DB connection is configured well (green status).
Also if I open the dbacockpit of solution manager, I can see the DB of the managed system and the connection checks are working fine.
But in technical monitoring, I get the alert that the DB is not available and also that "DBA Cokcpit Connection Status" = failure.
If I go to the details of the alert, I also can't see the problem.
I did already remove and add the system more often. Further I also did remove the connection in dbacockcpit and created it again.
But now I don't have any further ideas.
Hopefuly somebody can help me.
Thank you

Hi Christian,
1st let us find the error related to this.
Follow below KBA to find out the error that is causing the issue.
2016715 - Metric Troubleshoot using MAI Tools
Since, you are motioning a remote ASE database, make sure the below KBA is read and applied.
1532253 - SYB: Remote DB Monitoring for SAP Sybase ASE
Regards,

PI Integration between SAP ERP system and Cloud for Customer

Hi,
We have set up integration between Cloud for Customer tenant and our SAP ERP system via PI.
For performing initial load, when we try to activate change pointers for Message types in the SALE transaction, we don't find the MATMAS_CFS and DEBMAS_CFS in the ERP system(IDES ECC 6.0 EhP6).
CODERINT 600(SP1 &2) are installed and BC set COD_BYD_ERP_INT is activated in the system.
Could anyone let us know what are we missing here, so that we can get the message types.
Also we tried using Message type MATMAS for sending a message from ERP to Cloud for Customer. In PI message monitoring, the status shows as 'Processed successfully', however we do not find the message in Business Communication Monitoring in the Cloud system. neither do we see the Business Object created for that Material master.
Please let me know how to debug such a scenario.
Regards,
Sangeeta

Hi Vatsav,
Yes the outbound works now with the following urls with channel id as param. With the 'BusinessSystem used as the sender(COD) business system ID. Thanks for your help and the document
Customer Replication
/XISOAPAdapter/MessageServlet?channel=:<business system>:COD_SOAP_BusinessPartnerReplication_Send
Customer Address Replication
/XISOAPAdapter/MessageServlet?channel=:<business system>:COD_SOAP_BusinessPartnerAddress_Send
Customer Contact Replication
/XISOAPAdapter/MessageServlet?channel=:<business system>:COD_SOAP_BusinessParterContact_Send
Regards,
Sangeeta

SAP ERP == XI == SAP POS (Customer Data Maintenance)

Dear Friends,
   We are doing the scenario SAP ERP ==> XI ==> SAP POS. This is IDoc to File scenario. The file is picked from FTP site by receiver(where the Triversity server pick ascii files).
   Here problem is after picking the file, data is not inserted, updated, deleted in the Customer Profile table of Triversity Store Manager. (We follow the Technical Reference Guide for creating files).
Regards,
Jagan.

HI experts ,
   After integration of SAP retail and SAP POS, we are receiving file from PI for e.g DEPTTXN.asc (below) ,
              As according to DEPTTXN.ASC file format update type ,department, department group ,description should be of Decimal 2.0,decimal4.0, decimal 3.0 and string 20 respectively,
              But we are receiving data in below mentioned format ,because of that when we are posting this file to Xpress sever-> parm folder to view its data in Store manager we are not
              able see all the details of DEPTTXN.asc ,only price point details with the linked category and department are shown there. We are facing same difficulties with other two files also.
       Do we have to do some modification in PI for the naming of department and department group?
It will be great help ,if you can guide us to solve this particular issue.
99
2,MC11111,MC11110,"class. dresses, long",,,,,N,N,,Y,,,,,,Y,,,N,N,,,,,Y,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Y,,,,N,N,N,N,N,N,N,N,N,N,N,N,,,,,,,,,N,N
2,MC11142,MC11140,"skirts, short",,,,,N,N,,Y,,,,,,Y,,,N,N,,,,,Y,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Y,,,,N,N,N,N,N,N,N,N,N,N,N,N,,,,,,,,,N,N
2,MC11151,MC11150,"shirts, 1/1 sleeve",,,,,N,N,,Y,,,,,,Y,,,N,N,,,,,Y,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Y,,,,N,N,N,N,N,N,N,N,N,N,N,N,,,,,,,,,N,N
2,MC11152,MC11150,"shirts, 1/2 sleeve",,,,,N,N,,Y,,,,,,Y,,,N,N,,,,,Y,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Y,,,,N,N,N,N,N,N,N,N,N,N,N,N,,,,,,,,,N,N
2,MC11422,MC11420,"sweatshirts",,,,,N,N,,Y,,,,,,Y,,,N,N,,,,,Y,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Y,,,,N,N,N,N,N,N,N,N,N,N,N,N,,,,,,,,,N,N
2,MC11441,MC11440,"shirts,le.1/1 sleeve",,,,,N,N,,Y,,,,,,Y,,,N,N,,,,,Y,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Y,,,,N,N,N,N,N,N,N,N,N,N,N,N,,,,,,,,,N,N
2,MC11451,MC11450,"ties, classic",,,,,N,N,,Y,,,,,,Y,,,N,N,,,,,Y,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Y,,,,N,N,N,N,N,N,N,N,N,N,N,N,,,,,,,,,N,N
2,MC13101,MC13100,"meat, sausage",,,,,N,N,,Y,,,,,,Y,,,N,N,,,,,Y,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Y,,,,N,N,N,N,N,N,N,N,N,N,N,N,,,,,,,,,N,N
2,MC13102,MC13100,"fruits, vegetables",,,,,N,N,,Y,,,,,,Y,,,N,N,,,,,Y,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Y,,,,N,N,N,N,N,N,N,N,N,N,N,N,,,,,,,,,N,N
2,MC13103,MC13100,"dairy goods",,,,,N,N,,Y,,,,,,Y,,,N,N,,,,,Y,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Y,,,,N,N,N,N,N,N,N,N,N,N,N,N,,,,,,,,,N,N
2,MC13104,MC13100,"bread and pastries",,,,,N,N,,Y,,,,,,Y,,,N,N,,,,,Y,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Y,,,,N,N,N,N,N,N,N,N,N,N,N,N,,,,,,,,,N,N
2,MC14501,MC14500,"garden equipment",,,,,N,N,,Y,,,,,,Y,,,N,N,,,,,Y,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Y,,,,N,N,N,N,N,N,N,N,N,N,N,N,,,,,,,,,N,N
2,MC22003,MC22000,"Rolling trolleys",,,,,N,N,,Y,,,,,,Y,,,N,N,,,,,Y,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Y,,,,N,N,N,N,N,N,N,N,N,N,N,N,,,,,,,,,N,N
2,MC_ECKP,,"price point",,,,,N,N,,Y,,,,,,Y,,,N,N,,,,,Y,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Y,,,,N,N,N,N,N,N,N,N,N,N,N,N,,,,,,,,,N,N
HI jagan.
could you please share your mobile number.
regards
abhishek
09008833411
Edited by: abhishek011 on Jul 16, 2009 7:56 AM

Main advantages of SAP ECC6.0 over SAP ERP 4.7

Hello All,
I'm looking for some basic and important differences between SAP ECC 6.0 and SAP ERP 4.7 Versions from purely technical perspective.
Also please list some major advantages of using ECC 6.0.
Please do not paste any reference links or any website for the same.
I'm expecting answers like:
- ECC6 is available with Net-weaver WAS JAVA+ABAP.
- It supports Adobe forms.
- While executing debugging in report, 2 sessions are opened. 1 for program and another for debugging mode.
Regards,
Sushil.
Moderator message: please search yourself for available information/documentation.
Edited by: Thomas Zloch on Jan 11, 2011 12:26 PM

Look at [Transition and Upgrade to SAP ERP|https://websmp209.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000063452008E] (look also at [SAP ERP Upgrade on service.sap.com|https://websmp209.sap-ag.de/upgrade-erp])
Regards,
Raymond

Difference between sap erp and crm

hi
can u pls explaine me wht is the difference between crm and erp. how both are integrated
regards
Guru

Hi,
SAP Erp is a Total Enterprise Solution for the business.
But CRM is Specific Speciality part of Erp.
Deploying an SAP solution isnt just about technology. Its about removing barriers between people, information, geographies and business processes. And getting it right requires a broad range of capabilities, from deep technical skills and SAP solution implementation experience to in-depth knowledge that cuts across every industry and business discipline.
BPO Systems industry-leading services extend across the entire SAP lifecycle - from selection and design to implementation and support - enabling us to bring genuine transformation and bottom-line results to businesses. We partner with organizations in the commercial and public sector to:
Define and build business processes
Streamline operations
Provide real-time visibility across the enterprise
Implement efficient administrative and financial systems
Reduce costs
Eliminate duplication of effort
Shorten product-to-market time
Improve decision-making throughout the organization
SAP NetWeaver platform and Technology Integration
The SAP NetWeaver platform is changing the way companies support their business processes providing a comprehensive and integrated platform designed from the ground up to work with SAP and other standard technologies. But understanding when, where, and how to deploy SAP NetWeaver components to generate the most business value requires a comprehensive understanding of a companys business processes and organizational structurealong with in-depth knowledge of various technology practices.
Business Applications
Business Intelligence Enterprise Solutions
Customer Relationship Management Enterprise Solutions
Finance & Performance Management Enterprise Solutions
Human Performance Enterprise Solutions
Specific Enterprise Solutions: Overview
Supply Chain Management Enterprise Solutions
Regards,
Nandha.

Technical monitoring SAP ERP 6.0 NW 7.0 SP 28 in Solman 7.1 SP10

Similar Messages

Maybe you are looking for