Technical Monitoring -SLT System - No Metrices delivered
Dear Experts,
I have configured Technical Montoring for SLT system in our landscape .
But still i could not find few metrics collecting data . It shows as no metrics delivered .
Attachment has details about the metrics .
Please help me to fix the issue and let me know for further details .
Regards
Bala
Hi Balamurugan,
The solution for this kind of issues are different and not fixed solutions.But please check below points to make sure you have covered all steps.
1)LMDB landscap verfication should green for managed system.
2)Managed system setup should be green .
3)In technical monitoring setup make sure you assign all templates which is valide for your managed system software components.
4)After TechMon activation check managed system extractors in "Extractors Framework" administration and make sure all extrator in active and last runs are green.
Thanks,
Prakash
Similar Messages
-
Monitoring Status is Still Gray [Not Performed] When Technical Monitoring Setup DOne
Dear SAP Expert,
I have problem when setup technical monitoring SAP system through t-code SOLMAN_SETUP in Solman.
Managed system configuration (satellite system) was configured with green indicator for all steps.
Technical monitoring (system monitoring) steps were configured also with green indicator for all steps.
After configure technical monitoring, i found the status of monitoring status for that satellite system still gray (not performed).
And after 2 day the status is not changed yet to another indicator.
There is no problem with network firewall and server firewall.
Is there anyone of you have experience to solve this problem?
Please help me to solve this problem.
Thanks & regards,
Husin.Hi Husin,
If the status is still grey please re-execute the steps mentioned in SAP note 1819848 - All metrics are grey in Technical Monitoring to see if this helps.
Kind regards,
Roland -
Is SAP-OSS RFC Configuration required for Technical Monitoring ?
Hi Experts,
I have not configured the SAP-OSS rfc connection.Is it required for setting up the technical monitoring(Tcode : SOLMAN_SETUP).
If Yes can you please help me in solving the above problem.Our aim is to configure technical monitoring for system and self-monitoring.
Thanks In Advance,
Satheesh EHello,
I am assuming you are speaking about 100 concurrent users and not the entire company userbase.
Core i5 (although is dual core underneath) is generally meant for desktops, having said this, please note that its difficult to arrive at any recommendation based on simply userbase. You need to have more data with you with respect to amount of transactions, concurrent users, peak period, load during peak period etc.
You need to use SAP's quicksizer to calculate the amount of SAPS for your production servers, SAPS is the unit used to calibrate your hardware for running SAP Applications.
If you provide your SAPS value to hardware vendor, they will advise what CPU rating and how many CPUs you need. They will infact tell you the entire configuration that you need.
you can also buy the following book:
http://www.sap-press.com/products/Sizing-SAP-Systems.html
Regards,
Siddhesh -
SOLMAN 7.1 Technical Monitoring - System Monitoring - Host Grey
Hi All,
Wondering why my host monitoring in system monitoring is greyed out? I managed to get Technical Systems, Database and others work well but not Host Monitoring.
I checked SAPHOSTAGENT is running fine, DAA and wily as well. Also, all updated to latest version. Template assigned to Host monitoring as well. All troubleshooting and logs leaves no clue.
Any idea as i've run out of ideas.....
Cheers,
Nicholas ChangHi Roland,
I did check and below are what it returns:
Configuration XML 7.01.01.20120305075238 did not reach the agent. Agent XML:
No measured values have been reported by data provider.
No measured values were ever calculated.
However, when i click on the "FIX" icon, nothing appears........
I've changed the metric for "Host" managed object, assign and activate, rerun technical monitoring setting.
i dont find any useful thread on SDN nor SMP. I've drill to landscape browser, agent log, daa log, extractor and etc but to no avail. However, i did get host info on Wily and E2E.... just wondering???
Any clues?
Thanks,
Nicholas Chang -
Technical Monitoring - Metric Sybase Performance
Hi experts,
are there any performance-metrics in technical monitoring for database "Sybase"?
I found metrics like physical reads and writes or logical.
But they are only for temp-db usage.
So I think not really relevant for performance, or are the relevant?
I am not really sure what it means.
What I am looking for is like, how many reads/writes per seconds and what was the average time for <SID>-DB.
Also I don't get any results for Disk Reads/Writes per Seconds.
Kind regardsHello Giri,
I had a discussion with this about SAP.
And no, it is not possible to create customer metrics regarding ASE-performance.
All ASE-performance metrics get calculated within ST-PI coding and are hardcoded.
So there is no kind of "extractor" like CCMS which can be used.
Sure, it would be possible to code your own performance-calculation, but therefore you need to access the ASE-data, which I don't know how to realize.
However, in SP12 a lot of new ASE-performance metrics will be delivered.
So looking forward. -
Technical monitoring system status is showing grey
Hello experts,
I have sucessfully configured Managed system and techincal monitoring for one your system.
But i am nto able to see alerts and system staus is Grey for all the tabs.
Attached is the screen shot of system SBI which newly configured.
Please let me know which action is required to resolve this error. Your response is higly appreciated.
Thanks and Regrads
Ravi PandeyHi Ravi,
Please check this note.
1819848 - All metrics are grey in Technical Monitoring
2016745 - Grey metrics information required for analysis in technical monitoring with SAP Solution Manager 7.1
Also execute TCODE MAI_TOOLS on solman and refer SAP Note 2016745 for more info on inputs.
Regards,
Divyanshu -
Technical Monitoring - Metric for Mail (SOST)
Hi experts,
does anybody know, if there is a metric in Technical Monitoring which checks the EMails of SOST?
I mean especially, the amount of mails which are failed.
Otherwise I will develop a customer metric.
Kind regardsHi Christian,
I haven't used for any template for SOST and not sure even on it's existence in delivered templates.
However, you have this thing RZ20 to check number of emails in queue.
You can use the metric in RZ20 and migrate it in Tech Moni.
Make and test a custom alert using the below documents
CCMS to Technical Monitoring Migration: Use case - Monitoring OS Processes in Technical Monitoring
http://wiki.scn.sap.com/wiki/download/attachments/269157890/How+to+create+custom+CCMS+metrics+in+MAI.pdf?original_fqdn=w…
Regards,
Divyanshu -
Technical Monitoring: customizing cancelled batch jobs metric
We have recently implemented Solution Manager Technical Monitoring. We are struggling with the Number of cancelled jobs metric.
Our issue is that users have the ability to cancel their own background jobs. This of course triggers the alert. So, from that standpoint this alert can yield a lot of "false positives".
On the other hand, we do have jobs where we would like an alert - jobs by name, by ID, by program...etc.
However when I look at the Data Collection tab for the number of cancelled jobs metric(s), the parameters are very basic and don't provide any parameters to filter out jobs based on regular expressions as some other metrics do.
Does anyone have any insight into how this metric could be customized? Or, more ambitiously, could this be implemented as a brand new custom metric? If so, this seems to be a more involved process and we haven't seen a real comprehensive "guide" on how to create and implement a brand new custom metric so if anyone has any experience or documentation to share that would be greatly appreciated.
thanks,
Jeff HenkeHi Jeff,
I have been through the exact scenario in my previous project and can relate to your frustration.
The issue is that Technical Monitoring only plays with numbers when it comes to Job monitoring. This is also because Jobs are considered more of a Business related function.
Therefore, the best option would be to go for BPMon for jobs monitoring. This is the way I went and got a lot of success with it.
Once you have setup the BPMon structure - basic setup etc, Solution etc.
Goto BPO Workcenter and configure the monitoring object of type Simple job.
Here you can specify wildcard within the jobs that you want to monitor. for eg, *ERP*SO* - this would monitor all Sales order jobs for all country etc.... you then have to (ofcourse) define all the other components like notifications etc settings.
A detailed document created in SCN - Job Monitoring using BPM
Now as the email notification that comes out of the alert is pretty standard and at least didn't meet my requirements, so I wrote a BADI and configured the same within the Monitoring object to call this BADI.
You can see a complete step by step implementation of my BADI in SCN Customize Email Subject in Solman 7.1 using BADI
Hope this helps
All the best
Regards
Deepak -
Technical Monitoring one template used for production and non-production system.
Dear All,
Is there a way to have one template in Solman Technical Monitoring for production system and non-production system with different alerts ? For example if it exceeds a threshold for production system it will trigger red alert or set automatically an incident and if it's non prod system it will go to yellow warning alert ?
Regards
Lukasz GoralHi Likasz,
You first create and customize the template, and then assign to a system.
If it was selecting a system and then customizing a template, then may be such functionality makes sense.
So, I don't think that is possible.
Better would be copy the template used for production to non-production and make the adjustment to it.
Regards,
Divyanshu -
Technical monitoring of SRM system
Hi,
I would like to get a list of components to monitor in an SRM system. This is so that we can do weekly checks on the system to ascertain its health. For e.g. I should check whether IPC is up, similarly IGS, Integrated ITS, etc. etc.
Is there a standard template available for this?
Regards,
SanketHi Sanket,
I don't know if it still helps, but there is a Best Practice document for technical monitoring of SRM. It concerns monitoring of EBP, ITS (standalone), IPC, Business Connector, Requisite Catalog, J2EE Engine as well as configuration of the engines, agents, etc.
Unfortunately, it doesn't say anything about monitoring the integrated ITS...
You can find it at https://service.sap.com/~sapidb/011000358700007362432002E
Just in case you're still looking for it.
Matthias -
Technical Monitoring - DBA Connection red (failure)
Hi experts,
I have the following problem.
In technical monitoring I have one managed system, on which the DB availability check is not working.
The DB is a Sybase ASE 15.7
In solman_setup->system config the DB connection is configured well (green status).
Also if I open the dbacockpit of solution manager, I can see the DB of the managed system and the connection checks are working fine.
But in technical monitoring, I get the alert that the DB is not available and also that "DBA Cokcpit Connection Status" = failure.
If I go to the details of the alert, I also can't see the problem.
I did already remove and add the system more often. Further I also did remove the connection in dbacockcpit and created it again.
But now I don't have any further ideas.
Hopefuly somebody can help me.
Thank youHi Christian,
1st let us find the error related to this.
Follow below KBA to find out the error that is causing the issue.
2016715 - Metric Troubleshoot using MAI Tools
Since, you are motioning a remote ASE database, make sure the below KBA is read and applied.
1532253 - SYB: Remote DB Monitoring for SAP Sybase ASE
Regards, -
Technical monitoring SAP ERP 6.0 NW 7.0 SP 28 in Solman 7.1 SP10
Dear All,
Solution manager 7.1 with SP 10.
Added manged system SAP ERP 6.0 NW 7.0 SP 28.
completed managed system and technical monitoring.
But still not getting system in Technical monitoring -> system monitoring work center.
Regards,
Nikunj ThakerHi Nikunj,
Please check following:
1831983 - How to display dashboards from SolMan 7.1 SP05;
http://servcie.sap.com/rkt-solman > SAP Solution Manager 7.0 > Technology Consultant & System Administrator > System Monitoring / Administration
www.service.sap.com/slr -> Service Level Reporting
www.service.sap.com/ewa -> EarlyWatch Alert
Here it is described how to activate such reportings.
1909531 - Metrics in Interactive Reporting - Solution Manager 7.1
All those points are covered by the ALM Reporting dashboard and other
dashboards which are mentioned in 1831983 (and the SAP
Documentation) which was already provided in this message. Please also
check following notes:
1862024 - ALM Dashboards not showing any information
1570399 - Solution Manager BI reporting
Thanks
Vikram -
Disable EWA Alerts ins Technical Monitoring
Hello,
I would like to disable certain "Early Watch Alert" Alerts in the Technical Monitoring application of Solution Manager 7.1.
E.g. in my setup we get the warning that EWA:Security-Alert: "Security-related SAP notes have not been applied"...
Since this will be the case for most systems most of the time I don't want the warning to appear in the technical monitoring Dashboards.
I figure, that these alerts propably have something to do with "EWA Integration into MAI" and also that a "Early Watch Alert Template" seems to exist.
Unfortunately I'm not able to configue this template.
Do any of you know where "EWA Integration into MAI" or the above mentioned template can be customized?
Best Regards,
ThorstenHi,
Other way, you can manually deactivate metrics from the Technical monitoring setup, template maintenance-> select the template -> uncheck the EWA metrics.
Thanks
Jansi -
Technical monitoring status shows grey
Hello,
Checking the technical monitoring status, it shows grey
Checked the error & it shows the extractor not executed.
When checking the extractor status, its executed for host & not for the ABAP instance. Please assist.
Other systems have the extractor info as below
Thanks,Hi Magesh,
Pls refer below notes & links
1853160-Grey Host Metrics in Technical monitoring
System Monitoring grey status
SOLMAN 7.1 Technical Monitoring - System Monitoring - Host Grey
Regards
K.N -
Technical Monitoring - Grey Alert
Hi Experts My alerts in the technical Monitoring are grey, the system don't read the information. The system was configured and worked in the past, but now don't read any information into the technical monitoring What i can do about?
Hi Carlos,
To get more information on the issue please do the following:
1.Access the context menu by clicking on the small triangle next to
the grey metrics
2.Then select "Metric Troubleshooting".
You'll see a list of checks performed on the metric which should tell us
where things went wrong.
Please also check SAP note 1819848 and reexcute the steps mentioned here to see if this helps.
Kind regards,
Roland
Maybe you are looking for
-
Vendor Line Item not cleared after F110
Hi Gurus, We encountered an issue. The payment run was processed last April 18 and the vendor invoices were captured during the payment run and in the aging report, these invoices didn't appear as Open Item. In between April 19 until August 19, these
-
Unable to display a PDF image on the page - Mac 10.6
Hi, Running an iMac with 10.6.8 and Indesign 5.0.4. Just wanting to export a PDF as per usual via File > Export function. However, I keep getting the error message, "Unable to display a PDF image on the page'. No idea what this is and have never seen
-
Drop down menu not passing/reading a varaible
Hi i have a drop down list on http://www.mantle.co.uk/development.php?ID=1, there are 2 different types of projects; developments and investments. the drop down lists all the projects (developments and investments), so if a user is on development.php
-
I can't access my gift card though the account balance is shown in window when I sign in to I store. When I try to purchase a song, site requests me to sign in for billing information. When I do this, it just keeps replacing the same window with sa
-
Problems importing VHS video via Canopus ADVC110
OK, I can't figure out how best to do this. I picked up a Canopus ADVC110 converter box to aid in digitizing a stack of VHS tapes. Yesterday I performed a short (1 minute) trial run and was unsatisfied with the results. I imported the footage into iM