Technical name for formula in query designer

Hi,
We have created some formulas in Query Designer.
We tried to assign the technical names to these existing formulas, it goes away as the save button on the top of the pop up is disabled.
Is there a way to assign technical names of the formulas created in the query designer.
Regards,
Charu

Charu Pandey,
Formulas are local, means available for particular queries only. No technical name.
Create Calculated keyfigures instead of formulas..., so you can save with technical names.
To display technical name in query, give discription same as technical name.
Hope it Helps
Srini

Similar Messages

  • Units for formula on  Query Designer

    Hello,
    how can show a specific unit for a value calculated as a formula on a query ?
    thx in advance
    cheers

    Hi Juan,
    Could you please give more details...what is the original unit and what do you want it to be...

  • Find query technical name for a deleted query/workbook in the User Menu

    Hi,
    When a BEx workbook or BEx query is published in a role, people with that role will see the query / workbook in their user menu.
    It is possible to change the caption/title of the 'node' in the user menu so it does not necessarily have the same name as the report.
    I am now in a situation where a user tries to run a query/workbook from the user menu, and runs in an error message 'query does not exist on server'.
    How can I found out to which query/workbook a node in the user menu refers?
    I have tried the Metadata repository but because of the many nodes in the user menu this is a laborious task.
    I was hoping to find a table where I could use the role name and node name to find the 'target' report but I haven't been able to find such a table.
    Any (other) suggestions?
    Many thanks,
    Jan.

    Hi,
    You can publish the workbook to the role and as user have access to the role he can access the workbook also.
    Regards,
    Kams

  • Data target technical name for a query

    Hi
    Can some one tell me how to find the respective data target technical name for a report (query)?
    Thanks
    Abhi

    Hi,
    Create a View on tables RSZCOMPDIR and RSZCOMPIC and take fields INFOCUBE,COMPID and keep join condition
    1) RSZCOMPDIR-COMPUID = RSZCOMPIC-COMPUID.
    2) RSZCOMPDIR-COMPUID = RSZELTDIR-ELTUID.
    and keep condition RSZELTDIR-DEFTP = 'REP'.
    With rgds,
    Anil Kumar Sharma .P
    Message was edited by: Anil Kumar Sharma
    Message was edited by: Anil Kumar Sharma

  • How can i find technical name of varaibles in query 0T_FYEAR

    Hi all,
    I am trying to transport my bex objects (query and structures and stuff) from dev to QA.
    I had one previous transport from dev to qa and now I have two varaibles 0T_FYEAR and 0P_FYEAR.
    And these two varaibles have the earlier reuqest number so I want to delete then from that request and then add to the new request I am trying to create.
    But in the old request I dont see these two elements how can i check the technical names for that. I see two different entries in that request which are something like
    R3TRELEM2477EPQ40PB73OI4A73SI20IH rest all are starting with 43.....
    Can some one help out.
    Thanks in advance

    Hi Raj,
    You can try looking up those IDs in SE16 > V_ELTDIR_TXT to recognise which is which.
    Hope this helps...

  • Unable to write a formula in query designer

    Hi Experts,
    while writing a formula in query designer in development system there is an error.
    Formula is:
    Grand total =1
    when i write in the rows it is throwing the sytax error like " General syntax error in formula"
    But the same formula has been written in production( this query is not available in development so that i am designing the same query in the development system).
    some one give me an idea.
    Thanks

    Hi,
    As i checked with implementation team and they have written the formula it has been assigned like Grand Total = 1.
    i.e. Grand Total assign to 1.(But it is not Grand Total == 1).
    Thanks for your support.
    Thx
    Edited by: satya prasad on Apr 27, 2010 7:44 AM

  • Technical names for drop down values through webui

    Hi All, I have ECC 6.0 (SAPKH61705) transactions being launched in CRM 7.0 (SAPKU71305) through the transaction launcher. We are able to display technical names for values in ECC through the gui, and in CRM in both the gui and webui. Is it possible to display the technical names for ECC through the webui? Apologies if this is not the correct forum, I was not sure where to post. For further clarification of the issue, I hope these screen shots assist: ECC gui with 'display technical names' activated: qui - tech names on.jpg CRM webUI with 'display technical names' activated in both ECC and CRM: webui - tech names not visible.jpg Assistance appreciated.

    Hi Amy,
    Yes, it's possible.
    You can achieve it by coding. Instead of passing only the description to your drop down values, we can send technical name and description simultaneously to your drop down value. That's it.
    BR,
    RAM.

  • Need transaction code for opening Bex query designer?

    Hi ALL,
      Can anyone help me with the transaction code for opening Bex query designer?
      Like RRMX for Bex Analyzer similarly i want for Bex query designer.
    Thanks & Regards
    Sameer Khan

    THERE IS NO TCODE FOR QUERY DESIGNER. BUT THERE IS AN ALTERNATIVE..
    OPEN BEX ANALYSER THROUGH RRMX
    OPEN A QUERY
    CLICK ON TOOLS-> EDIT QUERY
    THIS OPENS QUERY DESIGNER AND YOU CAN USE IT NORMALLY..

  • What is the Count function in formula of Query Design?

    What is the Count function in formula of Query Design?  Could someone gives an example?
    Thanks!

    Example :
    COUNT of
    Also, check :
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7e58e690-0201-0010-fd85-a2f29a41c7af

  • Authorization check on technical name for statistical key figures

    Dear experts,
    I need an authorization check on the technical name for statistical key figures. I would like to avoid that local users can change/modify centrally defined key figures which follow a given naming convention.
    I checked the authorization object K_KA03 for statistical key figures but this doesn't help as it only checks controlling area and activity. I also couldn't find the technical name as an authorization field.
    What can I do to set up an authorization check on the technical name of the statistical key figure if it is not foreseen in the standard?
    Thanks for any ideas,
    René

    Try something in similar lines as suggested in below link:
    https://wiki.sdn.sap.com/wiki/display/PLM/COValidationstoadditionalauthorisations+checks
    Regards
    Sreenivas

  • Value input for screen and to apply it to formula in Query Designer

    Hi Gurus !
    How could i input an value for screen in BEx and soon to apply it to formulas resident in cells in Query Designer, the result must be appear for each cell in the report.
    Thank You for your helps.

    create a variable with Manual/user input option.
    use its value to populate the calculated field.

  • Is It  POSSIBLE to change the Technical Name of Z-version Query

    Hi  Friends ,
    I was changed all quereis and cube from standard version to Z version.
    For queries, by using rszc , i was changed to Zversion,Now again is it
    possible to change the Technical Name of Zversion Query ?
    If possible , can you please tell me the process ?

    Hi Hameed,
    This may be the reason you are getting an error.
    The target InfoCube, the InfoCube for the query copies, must contain all the InfoObjects of the source InfoCube (InfoCube of the original queries).
    The another reasons may be the copying of queries within the same cube shouldn't be done by RSZC.
    It's better to approach the Bex Query designer.
    Hope you understood..
    Check the link below for more information:
    Re: How to copy query elements without Bex
    http://www.bi-expertonline.com/article.cfm?session=&id=2055
    Re: copy queries + variants + workbooks -- RSZC ?
    Regards,
    Ravi Kanth
    Edited by: Ravi kanth on Jun 10, 2009 10:03 AM

  • Inputting technical name for varaints in portal makes it viewable to all

    Hello all, we are BI 7.0 using Portal for reporting
    This is the issue I am facing, when an user is trying to save a varaint for any particular query it asks for description and technical name. Now if the user only enters description and not tech name still the system accepts it and it works fine. If user inputs both the fields still it works fine. But now the difference is that if the user has entered technical name than that varaint can be viewed by all the users kind off like global variant for everyone; and if the user only inputs description than only the user that created the varaint can see it.
    So i just want to take away the technical name box from that screen; where/which template do I need to modify? I am using 0ANALYSIS_PATTERN for reporting.
    Is there any other work around for this or information that i am missing and i am seeing such behavior can someone explain.
    Thanks in advance

    Hi guys,
    Thanks for your answers first of all.
    I don't want to store the technical name of the openhub in the logical file name....i want this to be determined dynamically, depending on the openhub that is used with this logical file name.
    I was wondering were i can fetch the openhub technical name during the execution of the DTP on the openhub / when also the function module FILE_GET_NAME is being ran.
    Let me know!
    Thanks in advance!
    Regards,
    Freek

  • Technical names for objects within RSA1

    Hi!
    I cannot see in tcode RSA1 --> BI CONT --> Object Types --> Queries the technical names of the objects
    When I search for 0TCT_MC21* as query, no results can be shown.
    How can I change these settings in order to see the technical names of the objects as well?
    Any helpful information will be very appreciated
    Holger

    Hi,
    When you click on select objects there is an icon which says Technical Names on/off. This will show the objects with technicakl names.
    Amith

  • Formula in Query Designer

    Hi Experts,
    I am confused in calculating
    Total sales/ net sales in bex query designer
    can you help me
    Regards,
    Anil Doddi

    Hi,
    if u need to create formula in BEx first u need to create structure. any section column or Row right click on it and create structure, then right click on structure and add formula, in which u can select the chara or kf on which u wanna create formula.
    hope this helps.
    KS

Maybe you are looking for