Technical name of a condition

Hi Experts
How do I find the technical name of a condition in the Query Designer?
I am trying to create a button that turns toggles between on/off condition in the WAD. When I use the wizard and the system tries to show me all the possible conditions in the query, I get an error message: RSBOLAP 14, Transformer exception while transforming BEx Web templates. The system also gives the message: Object reference not set to an instance of an object. I think this error is corrected with the note 916090.
Until then I would like to input the value manually, but I can not find the technical name of the condition.
We use NW04s SP 12, front end BEx SP13.
Kind regards
Erik

Hi Erik,
In the Query Designer, open the query and goto the Conditions button.
The dialog that comes up, shows all the conditions created for that query. Right click on the condition for which you want to find out the technical name.
Hope this helps.
regards,
S R
PS: Assign points if helpful.

Similar Messages

  • Why Key Figures no Technical Name?

    Hello Experts,
    I am checking 0FIAR_C03_Q0005 from BI content Query, In Columns why many Key Figures no Technical Name? I do not know the right key figure which corresponds to the left of the key figure, How to know ?
    Image link: [http://www.itpub.net/viewthread.php?tid=1195549&page=1&extra=page%3D1|http://www.itpub.net/viewthread.php?tid=1195549&page=1&extra=page%3D1]
    please let me know the solution, thanks for your help in advance.
    Best Regards
    Steve

    thanks for your replay..
    I using Query Desinger open query  0FIAR_C03_Q0005,  I found all key figure the formula is same, I canu2019t find restrict condition, why is this?
    How to create calculated key figures and restricted key figures in Bex Query Designer?  Why some key figure is gray?
    Key figure : Balance ,  click u2018editu2019 button,  General -> Detail View ,  the formula is u2018[0DEB_CRE_LC]u2019+u2019[0DEB_CRE_LC]u2019
    Key figure: 0 days., click u2018editu2019 button,  General -> Detail View ,  the formula is u2018[0DEB_CRE_LC]u2019+u2019[0DEB_CRE_LC]u2019
    Key figure: 1-30 days, click u2018editu2019 button,  General -> Detail View ,  the formula is u2018[DEB_CRE_LC]u2019+u2019[0DEB_CRE_LC]u2019
    Key figure: 31-60 days , click u2018editu2019 button,  General -> Detail View ,  the formula  is u2018[0DEB_CRE_LC]u2019+u2019[0DEB_CRE_LC]u2019
    Key figure: 61-180 days, click u2018editu2019 button,  General -> Detail View ,  the formula is u2018[0DEB_CRE_LC]u2019+u2019[0DEB_CRE_LC]u2019
    Key figure: 181-365 days, click u2018editu2019 button,  General -> Detail View ,  the formula is u2018[0DEB_CRE_LC]u2019+u2019[0DEB_CRE_LC]u2019
    Key figure: >365 days, click u2018editu2019 button,  General -> Detail View ,  the formula is u2018[0DEB_CRE_LC]u2019+u2019[0DEB_CRE_LC]u2019
    Many thanks.
    Best Reagrds
    Steve

  • Data target technical name for a query

    Hi
    Can some one tell me how to find the respective data target technical name for a report (query)?
    Thanks
    Abhi

    Hi,
    Create a View on tables RSZCOMPDIR and RSZCOMPIC and take fields INFOCUBE,COMPID and keep join condition
    1) RSZCOMPDIR-COMPUID = RSZCOMPIC-COMPUID.
    2) RSZCOMPDIR-COMPUID = RSZELTDIR-ELTUID.
    and keep condition RSZELTDIR-DEFTP = 'REP'.
    With rgds,
    Anil Kumar Sharma .P
    Message was edited by: Anil Kumar Sharma
    Message was edited by: Anil Kumar Sharma

  • Deriving Planning Folder Technical Name From User-Exit

    Dear Colleagues,
    For those of you who know ABAP, do you know if it is possible to determine the technical name of a planning folder from within a user-exit (i.e. planning function that has been executed from within a planning folder)?
    Customer states: They would like to use a Planning Folder, and invoke a planning function of type user-exit (i.e. via button in folder), which will execute an ABAP that has a case statement for conditional execution of steps, based upon the technical name of the planning folder that invoked the call.
    Thank you in advance for any guidance or feedback you may be able to offer.
    -M

    Hi Michael,
    Write this code in the exit function
    FIELD-SYMBOLS: <fsl_class> TYPE REF TO cl_upb_pm_applc.
      DATA:          name(50),
                     plan_folder TYPE upb_y_ps_name.
      name = '(SAPLUPB_PM)gr_applc'.
      ASSIGN (name) TO <fsl_class>.
      IF sy-subrc = 0.
        CALL METHOD <fsl_class>->get_active_pm
          RECEIVING
            r_pm = plan_folder.
      ENDIF.
    Glad I could be of help to the mastero.
    Let me know if it worked.
    thanks

  • APD - error when activating, problem: 7.0 variable with long technical name

    Hello everybody!
    I have got the following problem:
    I created an APD, with one filter on 0calday using a variable. This variable was created on our own and works without any problems. It's a 7.0 variable with a long description "W_E_M_0CALDAY_WDLAS"
    If I try to activate the APD I get an error message "Analysis Process Has Errors, Activation Is Not Possible" and "Variable W_E_M_0CALDAY_WDLAS does not exist actively". But this variable is active!
    My colleague told me, that there seems to be a problem with long technical names of variables in APD. I tried to find a SAP note to this topic, but I didn't.
    Had anyone else this problem? How was it solved? Or are there any SAP notes I didn't find?
    Thanks for your help!
    Bettina

    In the meantime I copied the variable to a shorter name, but it still doesn't work. I tried it with a 3.x variable and a 7.0 variable. In the exit I first added an OR condition to the when-case, but this didn't also help. Afterwards I copied the whole coding in a separate when-clause.
    Stil not successful. Factory calender is OK. The variables also work in a normal query but not in the APD - the result of the last workday is always '00000000'.
    Any ideas?
    Kind regards,
    Bettina

  • Exception - Technical Name

    Hi,
    I'm playing with SET_EXCEPTION_STATUS command in WAD 7.0. It requires technical name of exception which I have problem to find. Under Query designer I do not see technical names for exception.
    Anybody tried that ?
    Thank you,
    Marek

    Dear Marek,
    this is just for your information: With BI Java Support Package Stack 11 you will be able to use a value help inside WAD's command wizard to lookup the IDs of exceptions and conditions.
    Best regards,
    Alexander Bauer, SAP NetWeaver BI Development

  • Field description in chart legend instead of technical name (BW query)?

    I am building a report from a BW query. The report has a grouping field and a bar chart in the group footer. When I execute the report the legend shows the technical name of the key figures even though I checked the "Show description" field in the "options".
    I can change the labels in "preview" mode (provided I can guess the real names), but just like in the field explorer I would prefer to always have the text instead of the nonsense technical name.
    Is this possible?

    hello all,
    you can use a 2 chart workaround for this.
    1) the first chart is the Group chart you already have...just disable the legend
    2) now create an Advanced chart using the description field as the On Change Of
    3) set the Order of chart to correspond with the technical field that the group is based on
    4) preview the chart and right click on the x axis area and format the axis so nothing is showing
    5) do the same for the y axis
    6) keep right clicking on all of the chart objects and changing them to transparent
    sounds annoying, is annoying, but it works.
    cheers,
    jamie

  • Find the technical name of a report in Crystal 2008(XI R/3)

    Hi,
    I know the report technical name(system genetared) is availble at properties tab in CMC in crystal XI R/2, but I am unable to find the same in XI R/3. Also let me know how to create a open document or generate URL for XI R/3 reports.
    Thank you,
    Regards,
    Preetham

    Hello Preetham,
    I recommend to post the first question to the [BusinessObjects Enterprise Administration|BI Platform; forum.
    The URL documenttion for opendocument R3 is [here|http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_url_reporting_opendocument_en.pdf]
    Best regards,
    Falk

  • Display technical name of a query in a web template ?

    Hi,
    I try to display in a basic web template the technical name of my query with a web item. In this order, I have tried to use the web item 'Text Elements' but how could I configure the latter in order to have only the technical name ?
    I have selected 'Display General Text Elements' in properties of the web item.
    In the property 'List of Text Elements', what is the couple of values that I have to configure ?
    Many thanks,
    CG.

    Hi,
    What you need to do is, keep a TEXT Web Item in the template.
    Then do not tick any of the options under Specific. Instead, go to List of Text Elements. In the first column, select General Text Symbol. In the next column type REPTNAME.
    This will give the technical name of the query in the output.
    Common text elements:
    u2212 technical name of the query (REPTNAME)
    u2212 description of the query (REPTXTLG)
    u2212 InfoProvider (INFOCUBE)
    u2212 key date for the query (SRDATE)
    u2212 accuracy of the data (date and time) (ROLLUPTIME)
    u2212 the person who wrote the query (AUTHOR)
    u2212 the last time the query was changed (date and time)
       (MODTIME)
    u2212 the last person to make changes to the query (MODUSER)
    u2212 current user (SYUSER)
    u2212 the last time the query was refreshed (date and time)
       (SYUZEIT)
    Try this. Hope it helps.

  • While saving Bex query with Technical name, it says Query already existing

    Hi,
    I am facing a problem. While saving a query withy its technical name (for example ZQYZMPR_01), it says that query is already existing. But when I search for the query in all tabs like Favourites, Roles, Infoprovider It is not found.
    I also checked a view V_REP_JOIN. In this view I find Query (ZQYZMPR_01) in MODIFIED version.
    I want to use my previous query instead of creating new one.
    Suggest, how can I retrieve my previous query that I am unable to search for.

    Saurabh
    Searching with descriptions may lead to confusion as there may be similar  descriptions to a query but just one technical name.  Check the query 'where used list' you may find answers.
    Can you check the query in RSZCOMPDIR ? If the query exist here, it must be there in the system.  Do the search with exact technical name ZQYZMPR_01 or ZQYZMPR*, you should be able to find.  Do not search in specific areas like roles etc..search directly by inputting the tech. name.
    Ferdinando - you can delete the query in RSZDELETE transaction.  While doing so, it will prompt for removal from all areas like roles, workbooks etc. Say 'yes' and delete, you will be able to assign the technical name to another query.
    Ramesh

  • Error while saving Views in Portal - Technical name not valid.

    Hi,
    When saving Views in Portal, I'm getting the message The Technical name of object QVIW is not valid. I've searched the forums but couldn't find any solution to this issue. We are on SP 16. Any help would be appreciated.
    Thanks & Regards,
    Hari

    Dear Harikrishna,
    while saving iviews in portal..
    it will prompt for some mandetory columns is it.. one is for description..
    and the iview name like iv<name of the template>.. this should be without space..
    and in the next page u should give technical name of the template as 'template=<name of the template'
    in this you should not give any space..finish and save the ivew..
    hope this would help you.

  • In the info cube insted of description need to display technical name

    Hi,
    I am displaying my info cube contents.But in the field name insted of description i need tehnical name of the filed to dispaly.can you plz anybody suggest me the solution.
    thanks
    Raj

    Hi Raj,
    Use T code : LISTCUBE
    you get 2 text boxes,  Object type : CUBE
                                     Data Target : cube name
    Check the option - Technical names.  F8
    You get all the technical names in the place of descriptions,
    hope this is fine
    Regards
    sreekanth

  • In the filter the value of text variable is not shown, only technical name.

    Hi All,
    We have some odd behavior of text variables in the filter screen of key-figures.
    After entering values in the variable screen, the report is executed.
    Within the report all text variables are filled, with the values entered in the variable screen.
    I say all, because we use both sap standard variables &0T_FPER& as customer specific &ZFSCYR&.
    When i want to change the key figures showned, i press the filter icon for key-figures (BW 3.5)
    In the list shown: existing filtervalues, the textvariables of SAP standard are filled with the value entered in the variable screen. However the customer specific is shown with the technical name (&ZFSCYR&) and not the value.
    Has anyone experience with this behavior or even better a solution to prevent this?
    As allways, each usefull answer points assigned!
    Regards,
    René

    Hi Rene,
    If ur custom text variable is not getting populated then you need to check out the code that u have written in there in CMOD for this and ofcourse if ur using this text variable after report execution then it will definately be in i_step 2.
    So best way is to debug your code and check that using code RSRT.
    Thanks
    Dipika

  • How can i find technical name of varaibles in query 0T_FYEAR

    Hi all,
    I am trying to transport my bex objects (query and structures and stuff) from dev to QA.
    I had one previous transport from dev to qa and now I have two varaibles 0T_FYEAR and 0P_FYEAR.
    And these two varaibles have the earlier reuqest number so I want to delete then from that request and then add to the new request I am trying to create.
    But in the old request I dont see these two elements how can i check the technical names for that. I see two different entries in that request which are something like
    R3TRELEM2477EPQ40PB73OI4A73SI20IH rest all are starting with 43.....
    Can some one help out.
    Thanks in advance

    Hi Raj,
    You can try looking up those IDs in SE16 > V_ELTDIR_TXT to recognise which is which.
    Hope this helps...

  • Technical names in Business Role selection screen

    Hello,
    When I log on to the WebUI I get the selection screen for the Business Roles (correct because I'm assigned to multiple).
    But in the selection screen the Technical Names of the Business Role is hown too and I don't want to show these to the users.
    So does anybody know how we can disable showing the technical names in the business role selection screen?
    Can it be done in BSP crm_ui_start > Page Fragments  > selectBusinessRole.htm Selection of Business Role? If so, what do i have to change?
    Thnx!
    Regards,
    Joost

    Hi Joost,
    This technical information is the tooltip that is comming from the following line.
    crm_ui_start > Page Fragments > selectBusinessRole.htm
    at line no 29
          tooltip="<%= profile_detail %>"
    If you can remove this line then technical information, that comes up when you do mouse over the role description, wouldn't come.
    Regards
    Ajay

Maybe you are looking for