Technical Name of Cube

Dear All,
Can we change the technical name of the Info cube.
Please help me.
Thanks,
Saveen Kumar

Hi,
It is not possible to change the technical name of the InfoCube once the InfoCube is activated.before activating you can change and save to activate.
even when you make a copy of it and change the old InfoCube..the relevant Objects with the InfoCube will be highly impacted..so any way you have to maintain all the upwards and downwards objects in the entire dataflow for that InfoCube...So this is also not advisable...
rather...
Creating an entirely New InfoCube with the desired Technical Name might be feasible solution.
hope this is clear for you.
Regards
Ramsunder

Similar Messages

  • In the info cube insted of description need to display technical name

    Hi,
    I am displaying my info cube contents.But in the field name insted of description i need tehnical name of the filed to dispaly.can you plz anybody suggest me the solution.
    thanks
    Raj

    Hi Raj,
    Use T code : LISTCUBE
    you get 2 text boxes,  Object type : CUBE
                                     Data Target : cube name
    Check the option - Technical names.  F8
    You get all the technical names in the place of descriptions,
    hope this is fine
    Regards
    sreekanth

  • Change Technical name of the Cube.

    Hi All,
    Is there a way we can chnage the Technical Name of The Cube.
    Thanks
    Umang

    Hello Umang,
    It is not possible to change the technical name of a Cube. There are too many complexities.
    You could create a new cube with the same structure using the 'copy from ' function while creating it and give it the desired name..
    If it helps, provide points.
    Regards,
    Ashok Saha

  • Can i change the Technical Name of A Cube

    Hi friends,
    I have created a n Info Cube with the name ZXXTB02 follwed by the creation of Transformation and DTP . But Latter i found that I violated the naming convention,
    So can i change the name of my Info cube to Z1XXTB02 or I have to create a new Infocube ...
    Regards
    Anurag

    Hi Anurag,
    Unless you can do some modification at the table level, you cannot change the technical name of the cube, so may be better to copy this as a new cube and give the desired technical name.
    Hope this helps...

  • How to know the table name of an InfoCub if we know cube technical name?

    How to know the table name of an ODS if we know the ODS technical name?
    Thanks
    Message was edited by: Kevin Smith

    hi kevin
    if the ODS is a standard ODS then you check the following way in SE16
    (for custom ODS objects)
    /BIC/A<ODS technical name>00 (Active Data Table)
    /BIC/A<ODS technical name>40  (Activation Queue)
    /BIC/B<10 digit number> (Change Log Table)
    (for SAP defined ODS Objects)
    /BI0/A<ODS technical name>00 (Active Data Table)
    /BI0/A<ODS technical name>40  (Activation Queue)
    /BI0/B<10 digit number> (Change Log Table)
    and for Transactional ODS Object you will have only the active data Table. So you need to check with /BIC/A<ODS technical name>00 for the custom ODS objects and /BI0/A<ODS technical name>00 for SAP defined ODS objects.
    hope this helps.
    regards
    vijaykumar

  • Two Technical Names with same Description in BW

    Hi Experts,
    Currently I am facing Problem in SAP BPC NW 7.5  one of Applications ( Profit And Loss Appl)
    At Backend ( BW) I could observe that for P&L application 2 diff technical names with same description "PROFIT AND LOSS". We were not sure who created the other one. Prior to that there was no problem while fetching the data.
    Before  creation of 2nd Info Cube in BW, I was able to retrieve the values ( Transfer values from Fixed Cost & Revenue Forecast). However, after cretion of 2nd cube  unable to see my data in PL reports.
    Before deleting 2nd Cube in BW, I could see the data in backend in old Cube, but unable to retrieve data in BPC excel report.
    Once I deleted the new PL infocube in BW where there was no data in that cube, still I was not able to retrieve the data in my old cube.
    Request you to help me....
    Thanks & Regards,
    Hari

    Hi Sanjeev,
    If Appset transport happend twice, all applications should have come in BW. But in this case only PROFIT AND LOSS has got 2 diff tech names.
    Hi Nilanjan.
    Yes, both the cubes in Infoarea ( QA system) and we have not faced earlier this problem either in any other environments ( DEV or PROD).
    Will DEV system appset transport will help to resolve this issue in QA since DEV & QA has same structure?
    Regards,
    Hari

  • How to Rename the technical name and description of an infocube?

    Hi,
    How to Rename the technical name and description of an infocube?
    Thanx in advance,
    Ravi.

    Ravi,
    You cant change the Technical name of the cube but you can change the description of the Cube. If you want to have a Cube with the same properties and with different Techname and Description better you do copy from the base cube and rename as per your requirement.
    Regards,
    Gattu.

  • Is It  POSSIBLE to change the Technical Name of Z-version Query

    Hi  Friends ,
    I was changed all quereis and cube from standard version to Z version.
    For queries, by using rszc , i was changed to Zversion,Now again is it
    possible to change the Technical Name of Zversion Query ?
    If possible , can you please tell me the process ?

    Hi Hameed,
    This may be the reason you are getting an error.
    The target InfoCube, the InfoCube for the query copies, must contain all the InfoObjects of the source InfoCube (InfoCube of the original queries).
    The another reasons may be the copying of queries within the same cube shouldn't be done by RSZC.
    It's better to approach the Bex Query designer.
    Hope you understood..
    Check the link below for more information:
    Re: How to copy query elements without Bex
    http://www.bi-expertonline.com/article.cfm?session=&id=2055
    Re: copy queries + variants + workbooks -- RSZC ?
    Regards,
    Ravi Kanth
    Edited by: Ravi kanth on Jun 10, 2009 10:03 AM

  • Bex Query calc key figures in Crystal report not showing technical names.

    Hi,
    I have created calculated key figures in a BEx query for which the data comes from a SAP BW cube. I have assigned each of the calculated key figures a proper technical name which I expect to see when I bring it to crystal report. When I bring that query in Crystal as a data source the calculated key figures show a wier network id names instead of the technical names. I am having a problem in using those wierd technical name in my report and my formula's as I am not able to identify what is what.
    Please urgent help requested.
    Thanks
    Mahendra

    I dont have an account on such website. I will explain u the problem in detail.
    When I create a calculate key figure in SAP BEx query designer I assigned a technical name to it, a meaningful one. In my case one such example is Actual_revenue is the name that i have assigned and the description is Actual revenue. When I create a crystal report from it and in that report if i create a formula.
    I get this {ZIC_COPA_Z_SALES.[Measures]-[25V1KYL4VE92X0T4OMHVYM90V]}
    If u see it its a wier 25 digit name.
    Instead of this I want to see
    {ZIC_COPA_Z_SALES.[Measures]-[ACTUAL_REVENUE]} which is what I have given in the query. I am using the SAP BW MDX driver to connect to Bex query.

  • Can't change a Restricted Key Figure technical name in QD BEx 7.1.0

    A few days ago I created a new Restricted Key Figure in Query Designer and it was autopopulated with a default technical name.  So I immediately changed it to 'ZRNPVORDINTFACTPPP_FY'.
    Now, today, I realized that the 'F' in the technical name is a typographical error and I need to remove it.  I clicked the Restricted Key Figure on the left from within the list and clicked the Change/Display pencil icon in the properties window, but the Technical Name field is still greyed out.  Also tried right clicking and selecting Edit, but same problem.
    Would removing all instances of where the figure is used in the query and other queries allow me to change it?  Could it be a user rights issue?
    As always, thanks for the help!

    Hi,
    After creating a RKF , you cannot change its technical name.
    If the RKF has a lot of restrictions and creation of another similar RKF is a big process ,
    you can create a copy of the same through transaction RSZC.
    In RSZC , give the source and target cube name as the name of the multiprovider on which your query is built,
    select restricted keyfigure ,click on execute ,  in the list which comes after execute find your KF 'ZRNPVORDINTFACTPPP_FY'
    and click on transfer/copy option available.Change the technical name as you want and then click on execute. A similar keyfigure with the desired technical name will be created in query designer ,global keyfigures .
    Replace the same with your Old keyfigure in report.

  • How to find the technical name

    Hai,
    How to find the technical name of a data source for General Ledger: Balances – Period Breakdown
    Thanks

    Hai
    my question is in General Ledger: Balances – Period Breakdown
    the link is showing General Ledger : Balances , Leadingledger
    I got this link in queries for General Ledger: Balances – Period Breakdown
    http://help.sap.com/saphelp_nw70/helpdata/en/2d/955a73da4d6d41a0a6128caf274ce8/frameset.htm
    But here technical name of info cube is given.But i dont know how to find the technical name of the data source.This might be simple question i think but i am new to SAP
    Thanks

  • Find technical name of receiving query in RSBBS assignment

    Dear Experts,
    under transaction RSBBS one can assign sender/receiver details. While the technical name of both sender and receiver are entered when createing the RRI, one can only retrieve a compressed ID (i.e. 46F28FNV1L4H1QENI1KKEKWUCAZPAOPRD) for the receiver in transaction RSBBS.
    We would like to find a way to determine the technical name of that particular compressed ID. I have already searched the RSBBS* tables, but I cannot get past the compressed ID (field RONAM) in i.e. table RSBBSQUERY
    My question:
    - Can you provide me a table/view/program/transaction/... that shows the relationship between senders and receivers by means of technical query names (not ID's)?
    - Or can you provide me (step-by-step) the relation between different tables and fields that would allow me to do so?
    Kind regards,
    PJ

    Hi Simon,
    thank you for your reply. I have researched your proposal, and I can indeed find the relation between my sender query's technical name ZSENDERQUERY_Q001 and the field RSBBSQUERY-RONAM that looks like this: 46U5CEI2BU3U8P8GZOFWWN3GKAZSD_C03 (Mind the name of the infoprovider at the end!).
    This information can also be retrieved from transaction RSBBS, where I can enter 1 senderquery's technical name, and which returns me the associated RSBBSQUERY-RONAM values in the column "Receiver Object". Your contribution allows me to create a view to get this information for multiple sender queries from different cubes.
    However, I would like to go one step further. From this RSBBSQUERY-RONAM value I would like to get the target/receiving query's technical name that looks like this "ZRECEIVERQUERY_Q002".
    This is my ultimate goal as I need to delete all obsolete queries from the BI system, and the associated jumpqueries. Creating a single list by means of a view would help me a lot.
    Kind regards,
    Pieter-Jan

  • Changing the technical names of an ODS and queries

    Can I change the technical name of an ODS and the queries that are built on it? If so how? Thanks

    Hi Niten,
    As said by others it is not possible to change the technical name of any BW Object as there are too many complexities involved. However a possible option is create another ODS/cube and queries as the copy of the existing one and then transfer all the data.
    Refer this post:
    Re: Change infocube name
    Bye
    Dinesh

  • Technical names of infoobjects in infosets

    Hi,
    I have create an Infoset through several ODS and cubes. System automatically generates technical names starting with F, at design screen for each infoobject in ODS or cubes. But i want to see and use original tech. names of objects especialy on the BEX design screen. F names are confusing me.
    Is that possible ?
    best regards,
    Yigit

    Technical names are assigned sequentialy.
    You can enter in Infosets definition and push the button of technical names (the most right one)
    In BEX i think is not possible.

  • Is it possible to change InfoCube technical name/rename it?

    Is it possible to change InfoCube technical name/rename it?
    Thank you,
    AG

    I think no possibility to rename the technical name since it's such a 'key field'.
    if not in production yet and no data and the 'afterward' not too much (reporting related,multiprovider), you may consider to copy the cube to the name you want, then copy update rules (this can be easy done), and copy queries.
    Hope it helps.
    Regards

Maybe you are looking for

  • Can't move songs on iPod

    I went to update my iPod today and discovered that I could no longer move songs around on the iPod in iTunes. I used to be able to play music off the iPod in iTunes, and now the library on the iPod is faded out (meaning I can't do anything with the m

  • Would you please help  me in cleaning my two years old mac book pro

    my computer is two years old. i vist many sites and as a result it has gradually become very slow.is there any advice please?

  • Help using "WHERE col_N IN (?,?,?)" clause in SQLJ stmnt

    Hi All, I need assistance with a SQLJ SELECT statement that includes a 'WHERE <colN> IN (<value list>) clause with <value list> consisting of a set of host variables. Unfortunately, I can find NO reference to such a clause - spefically, a WHERE that

  • Dock taking up 100% of the cpu

    Recently I went crazy partitioning my macbook pro's hard drive for linux and windows partitions and I partitioned so much that I corrupted something on my snow leopard partition. In activity monitor my dock ranges from taking up .2% of the cpu up to

  • Perl regex

    Anyone knows how do I replace a single character in each line in a file with another character using perl? I have something like this This is the begining. This is a test test. This is a test test. This is a test test. This is the end. This should be