Technical Name of the workbook Bex Broadcasting

Hello,
I have a workbook in Bex BW 7.0 which should be broadcasting to the managers via e-mail. Everything is ok except the name of the workbook. Workbook goes to e-mail address with its technical name instead of its description name. It's not because of the language differences problem. We checked it.
Looking forward for your replies.
Thank you very much.

Hi,
Please check if you have given the description of the workbook,  in "Subject" (under "Texts" tab )
while maintaining the Settings for broadcast.
Hope this helps.
Thanks.
Ashmita

Similar Messages

  • SAPBEX VBA - I need the technical name of my workbook

    Hello everybody,
    I have to solve the following problem:
    My task is to open an existing workbook (BE Analyzer) and paste a picture depending on the technical name of the workbook. I have already programed the the download of the picture, but I still need the technical name of the workbook I actual opened. I want to export this parameter with VBA and the help of RFC to my ABAP program on server. I think I have to use the package sapbex.xla, because this package know the technical name. Is it possible to link my module and the modules of the package sapbex.xla?
    I hope somebody is able to help me!
    Paul

    Ok, I found a solution...

  • Only technical name showed for workbook in BI Administration Cockpit

    Hi,
    When I use the BI Administration Cockpit, for BI Application Statistics under Query Runtime Statistics,
    only technical name showed for workbook.  Is it possible to also show the name and how to do?
    Many Thanks
    Jonathan

    hello,
    you can check out some webinar on the same:
    Webinars
    http://help.sap.com/saphelp_nw2004s/helpdata/en/43/15c54048035a39e10000000a422035/frameset.htm
    Regards,
    Dhanya

  • Dot charcter in technical name of the BW hierarchy causes WebI to fail

    Hi,
    I have a WebI report based on a BEx query. The BEx query has a mandatory hierarchy variable. The hierarchy has "." dot character in its technical name. The dot character is used to distinguish 2010 and 2010 profit center hierarchies.
    When a universe is generated on this BEx query, the profit center objects have select staments as
    [!V000002_].1012_].[LEVEL00]
    . I think
    ].1012
    causes parsing to fail. Also, I get the "Supplied XML is not valid" error while drilling down the hierarchy in the Webi prompt.
    I manually replaced the string "].1012]" with "]" in the Universe but it did not help. I still get the error in the Webi prompt.
    I came across the note 1447838. However, it suggests to install FixPack 2.7 to get rid of the above behavior. However, I am already on BI XI 3.1 SP3 and I think I should already have fixpack 2.7.
    Please let me know if anyone has any idea on this issue. Of course, I can look at the possibility of using some other character for distingusing between the hierarchies but curious to know if there is any solution.
    Environment:
    BOE XI 3.1 SP3
    SAP BW 7.01
    BO-SAP Integration Kit SP3
    Universe connection authetication - SSO
    Edited by: Bhargav Gandhi on Sep 21, 2011 11:07 PM

    I upgraded BOE to SP4 but still no luck.
    SP4 includes FixPack 3.1 and FixPack3.1 has a fix for ADAPT01383387 (SAP Note 1447838).
    -Bhargav
    Edited by: Bhargav Gandhi on Oct 4, 2011 4:13 PM

  • Change Technical name of the Cube.

    Hi All,
    Is there a way we can chnage the Technical Name of The Cube.
    Thanks
    Umang

    Hello Umang,
    It is not possible to change the technical name of a Cube. There are too many complexities.
    You could create a new cube with the same structure using the 'copy from ' function while creating it and give it the desired name..
    If it helps, provide points.
    Regards,
    Ashok Saha

  • Changing the Technical name of the Infoset ????

    Hello,
    Is there any way from which i can change the technical name of the already created Infoset in BW 3.5 ver.
    Regards,
    Mayank

    Hi,
    Tcode : RSISET
    http://help.sap.com/saphelp_nw04/helpdata/en/62/a7663bac808b78e10000000a11402f/content.htm
    Regards
    Happy Tony
    Points == Thanks

  • Any option to change the technical name of the info sources?

    Hi,
    Is there any option to change the technical name of the infor sources?

    Hi,
    You cannot change the technical name of infosource. You can go for Save as option and save it with different techincal name as required.
    Regards
    Akhan

  • Display the technical name of the last level of the hierarchy

    Hello,
    I have a report with hierarchy. Each level of the hierarchy uses different infoObject. I want the report to display the technical name only for nodes from specific infoObject. For example if the infoObject uses 0cust_grp1 (for the first level), 0cust_grp2 (for the second level), 0cust_grp3 (for the third level) and 0customer (for the last level) and I want to show the technical name only for the 0customer infoObject. I know how to do it in WAD reports. Is there a way of doing it in the Query Designer?
    Please Advice,
    David

    David,
          Check the below possibilities.
    1. You can do that in a workbook.
    2. Create a copy of the same hierarchy and for the 0CUSTOMER object and nodes give tech names as text also.

  • Hide the query name in the workbook

    Hi Experts,
    I have a workbook and contains four worksheets defained from the same query.whenever i run the workbook the query name is displaying in the worksheet.My requirement is to hide the query name from worksheets outputs after the workbook executes.
    Regards

    Hi,
    Open the orkbook. go to settings (Bex  tool bar)> uncheck 'olap functions with right click'->Hide the header row of the workbook (using excel functionality..i.e right click on row>hide)->now enable 'olap functions with right click'-->save the workbook...
    you will not see workbook name after refresh.

  • Function module to create query view from technical name of the query ?

    Hi Experts,
    I am trying to create webservice definition using function module.
    In this code, I am calling function module 'RSCRMBW_REPORT' which requires query view name ( we can see this in RSCRM_BAPI) as a value for parameter i_reportuid.
    For the time being I am hardcoding the value but I need to use a function module which will convert techincal name of query into query view.
    Can anyone have any idea about the above requirement? Or is there any other way to solve the problem?
    Thanks in advance
    Shamkant
    Edited by: SHAMKANT SONAWANE on Apr 7, 2009 5:38 AM

    Hi,
    You can use FMs CONVERSION_EXIT_GENID_INPUT  and CONVERSION_EXIT_GENID_OUTPUT to get query view.
    First call FM CONVERSION_EXIT_GENID_INPUT with parameter input as query technical name then it will return Output in the form of GENID .
    Pass this GENID as input parameter to FM CONVERSION_EXIT_GENID_OUTPUT to get query view as output.
    Eg :
    Test for function group      RRI5
    Function module              CONVERSION_EXIT_GENID_INPUT
    Uppercase/Lowercase
    Runtime:        6,652 Microseconds
      Import parameters               Value
      INPUT                           Y0IC_C03_Q0018_2
      Export parameters               Value
      OUTPUT                          4D1I916ID7TWS1CK27154WYZ8
    Test for function group      RRI5
    Function module              CONVERSION_EXIT_GENID_OUTPUT
    Uppercase/Lowercase
    Runtime:        2,818 Microseconds
      Import parameters               Value
      INPUT                           4D1I916ID7TWS1CK27154WYZ8
      Export parameters               Value
      OUTPUT                          0IC_C03/Y0IC_C03_Q0018_2
    0IC_C03/Y0IC_C03_Q0018_2 is expected query view.
    Hope it helps...
    regards,
    Raju

  • Web Page title is showing technical name of the report

    When BI report is running from portal (web), in the wab page titel is showing report technical name. But i want to display report description,
    If any one knows about this pls send me the how fix that. I am working on BI 7
    Thanks
    Samit

    Hi,
    Have you used a Text Item for displaying the name of the Query ? If yes, in the properties of the Text Item, you would have binded the Data Provider. Here, you can give the option of Displaying General Text and the General Test Item can be the Query Description.
    Pls let me know if you have used somthing else or in some other way.

  • Currency Conversion Variable is showing the Technical name of the variable.

    Hi friends,
    We are using currency conversion Variable in our querie, it was showing the description of the variable until yesterday.
    Somehow something has changed and suddenly its showing up the Technical Name inteasd of Description. This is happening not only to one variable but for many of them.
    Can someone pls guide me how to rectify this?
    Your help verymuch appreciated.
    Thanks in advance.
    BN

    We had the same problem. Unfortunately this setting only seems to be available for a query view. We were using web reporting anyway so we just converted the dataprovider to be a query view where this setting had been made. It's a bit ugly but it worked.

  • AO 1.4 patch 7  how can I hide technical names in the analysis panel

    I just install analysis for office 1.4 patch 7.  
    We love the speed in which it opens and connects to the BI platform.
    The problem is that now in the Analysis panel the technical names are displayed in front of the description.
    How can I turn of the technical names?
    It is very confusing to our users.
    Patty

    Patty:
    Under Analysis > Settings > Support Settings Tab
    Click off Display Technical Names

  • Bex Broadcasting:how to send BI report result to non BI users via abap prog

    Hi guru,
    We have 100 employees who must receive BI Report result by email via Bex broadcasting .
    We don't want to fill in the broadcast setting manually but via an abap program that will execute the boradcasting.
    Can you help me finding a program that can perform this task ?
    Thanks in adavnce

    Hi....
    You can use ABAP program RSRD_BORADCAST_STARTER with the variant value set to Broadcaster Technical Name.
    for more info : [Bex Broadcast creation user - best or common practice;
    Regards,
    Chintan

  • Display characteristics technical names

    hi all,
    i have a requirement to create workbook with specific format, so i am using a query in an masked sheet and based on that query i created the needed format in an other sheet.
    now i the problem is how to link thus two sheets, to resolve this i am using technical names of the characteristics.
    The question is how to display technical names in the workbook (query sheet)? now i am connecting with a language for which there is no text description to get them, but it may cause some problems for the users.
    Thank you.

    Hi Srinivas,
    thanks for your replay, but it's not a solution we have a huge number of KFs.
    any other idea?
    also if you have a best method to link the query sheet and the formatted sheet, please share it with me.
    Thanks
    Anass

Maybe you are looking for

  • Showing multiple values on front panel using array

    For example, if I input "10" for number of datapoints, I want to see 10 hex and binary values all listed in a column. Right now, only 1 value shows up and all the previous values get erased Thanks! Solved! Go to Solution. Attachments: labviewa.png ‏3

  • How do I create a text field that automatically enters the same info on proceeding pages

    I know this is a basic question for Acrobat Pro, but I'm a newbie at it.  Basically, I work with pdf forms in education and I would like to figure out a way where if I enter for example someone's birthdate in page 1, and it automatically enters it in

  • File Open/Save Boxes of SQL- Developer

    I am not aware if these points are already discussed or on features list. 1) I could not find how to set default directory where SQL Developer will go directly when I am opening new file. 2. Also as far as I experienced SQL Developer does not remembe

  • Iphone Contacts To Nokia

    Hello, My Iphone has been stolen a couple of weeks ago and I want to get all my contacts back( backed up somewhere on the computer from the itunes sync's) and put them in windows contacts/my nokia phone or a blackberry. is it possible to retrieve my

  • Bex Query : Visual Editor Code

    Hi, I have a specific requreiment , I have work book which is getting the data from 2 quereis, whenever any new line is added into the query that need to be appended in the query automatically can anyone will guide me or can we write any macro for th