Technical Names by default

Hy Experts!
Every time I use the modeler, I must change setting for objects as 'show technical names'.
How can I fix this view (technical name) as default?
Thanks in advance!

Hi SSAP,
for each section of the planning modeler you can customize the settings and save them. Just go to "settings" and adjust the settings as you like. Afterwards go to "save as" and save the settings. Be aware to activate the "reuse"-option (should be something like apply as standard).
Brgds,
Marcel

Similar Messages

  • Default Technical Names to "On"

    Is it possible to set up technical names to default to on.  Our users prefer to see the technical names at all times. 
    Thanks in advance for your help.

    Hi Sonya,
    There is a setting for AWB. Couldn't find for BEx.
    Best regards,
    Eugene

  • Query Designer: Technical names activated as default

    Hello everybody!
    I work with the Query Designer v3.5. How can I switch on the technical names automatically. At the moment I must click on the menu item.
    Regards, Thomas

    Thomas,
    The Technical Names icon is an on/off option. Once you turn it on it stays on til you hit it again.
    This applies in the Query Designer, dialogue box for Open - Queries & Workbooks etc.
    Regards
    Gill

  • Technical Names appearing in the report output

    Hi Experts,
    I am in support and got a strange case. When one of the users runs the report in web, he sees technical names of the fields instead of their description. On the contrary, when I run the report, everything comes fine. I don't know where the problem could lie. If you can help me, that would be really great.

    Hi Shobhit,
    Please check that if the objects are Translated to the language User is using.
    When you try to run the report, you might be using English as default language and everything is there in English only.And when user tries to run the report, most possibly use's login Language must be different.
    You can crosscheck this by using the users language while logging in to Analyser,
    If this is the case (Translation) even you will see the Technical names.
    For Translation Help :
    [https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30a65c3a-2ad5-2910-a4be-88412392cfe5]
    Hope this helps.
    Best Regards,
    Pratap Sone

  • Can't change a Restricted Key Figure technical name in QD BEx 7.1.0

    A few days ago I created a new Restricted Key Figure in Query Designer and it was autopopulated with a default technical name.  So I immediately changed it to 'ZRNPVORDINTFACTPPP_FY'.
    Now, today, I realized that the 'F' in the technical name is a typographical error and I need to remove it.  I clicked the Restricted Key Figure on the left from within the list and clicked the Change/Display pencil icon in the properties window, but the Technical Name field is still greyed out.  Also tried right clicking and selecting Edit, but same problem.
    Would removing all instances of where the figure is used in the query and other queries allow me to change it?  Could it be a user rights issue?
    As always, thanks for the help!

    Hi,
    After creating a RKF , you cannot change its technical name.
    If the RKF has a lot of restrictions and creation of another similar RKF is a big process ,
    you can create a copy of the same through transaction RSZC.
    In RSZC , give the source and target cube name as the name of the multiprovider on which your query is built,
    select restricted keyfigure ,click on execute ,  in the list which comes after execute find your KF 'ZRNPVORDINTFACTPPP_FY'
    and click on transfer/copy option available.Change the technical name as you want and then click on execute. A similar keyfigure with the desired technical name will be created in query designer ,global keyfigures .
    Replace the same with your Old keyfigure in report.

  • BW 7.0 - Technical names in query designer

    Hi colleagues,
    is there any possibility to set an default value for the technical names in the query designer. Every time I open the query designer, the system shows me only the "text" for the query elements and not the key.
    regards
    Dieter Gerl

    The "functional enhancement schedule" document now describe the single query refresh within a workbook to be available in Stack 14.
    The link also need to be check very often. (I got a version 12.3 from 08/06/2007 which planned enhancement to SPS13 whereas version 12.5 from 28/06/2007 plan it to SPS14)
    https://websmp201.sap-ag.de/~sapidb/011000358700004483762006E
    Best Regards,
    Davy

  • Report output showing in technical names

    Hi,
    When I execute a query, input variables and report out put are shown up generally in InfoObject descriptions before.  Just suddenly what happened don't know these reports are showing up output in Technical names, Input variables and the report as well.  Where do you make this to set as default to display in InfoObjects descriptions input variables and the report as well instead of technical names.  Kindly help, I appreciate your answers.  Thanks
    regards,
    reddy
    Edited by: chreddeppa on Oct 21, 2011 8:13 PM

    Sometime it happens because of the lanugate setting of the browser.
    If the browser is internet explorer, you can go to Tools > Internet Option > General > Language and if you are using English, it should be added there (and I guess as first language).
    Try if it solves your issue.
    Regards,
    Gaurav

  • Trace routine if we know Technical Name of it?

    Hi,
    I had Transport request which has a routine included by means of its technical name!
    But the objects i had included in the trasnport request definitely not a routine---
    So how can i trace that routine where it was used?????
    Raj

    Routines are usually associated @ InfoObject, Transfer Rule & Update Rule levels. So if your transport is small, you can do a manual check at each of these places.
    Alternatively this is what you can do.
    - Try to recreate the transport in the "Transport Connection" in Workbench
    - Pull in the necessary Objects that you have transported to your transport window. Now the objects that are collected can be displayed as Hierarchy(Default) or List. Choose List and  it will display the routines. That way you can identify.
    Regards
    Anujit Ghosh

  • Excel 2013 connect to a cube, and Power View concatenate the column name by default

    Hi Guys,
    Currently, we met a problem with excel services to connect to a cube, when we develope a Excel 2013 Powerview report, the data model column name is concatenate into terrible name by default. e.g. Dim TimeDate Date, Dim TimeTime HierachyYear -Month.
    But when start up the data model with Powerpivot, everything gone well. We knew that it can be manual update the name as workaround, but we need to do it every time we create a new powerview with the data model.
    Is that any other solution we can do with?
    Please help.
    Johnny

    Hi,
    As this question is more related to PowerView Report, I suggest you can create a new post in the PowerView forum, you will get more helpful information from there.
    PowerView Forum:
    https://social.technet.microsoft.com/Forums/en-US/home?forum=powerview
    Best Regards
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Jerry Guo
    TechNet Community Support

  • Field description in chart legend instead of technical name (BW query)?

    I am building a report from a BW query. The report has a grouping field and a bar chart in the group footer. When I execute the report the legend shows the technical name of the key figures even though I checked the "Show description" field in the "options".
    I can change the labels in "preview" mode (provided I can guess the real names), but just like in the field explorer I would prefer to always have the text instead of the nonsense technical name.
    Is this possible?

    hello all,
    you can use a 2 chart workaround for this.
    1) the first chart is the Group chart you already have...just disable the legend
    2) now create an Advanced chart using the description field as the On Change Of
    3) set the Order of chart to correspond with the technical field that the group is based on
    4) preview the chart and right click on the x axis area and format the axis so nothing is showing
    5) do the same for the y axis
    6) keep right clicking on all of the chart objects and changing them to transparent
    sounds annoying, is annoying, but it works.
    cheers,
    jamie

  • Find the technical name of a report in Crystal 2008(XI R/3)

    Hi,
    I know the report technical name(system genetared) is availble at properties tab in CMC in crystal XI R/2, but I am unable to find the same in XI R/3. Also let me know how to create a open document or generate URL for XI R/3 reports.
    Thank you,
    Regards,
    Preetham

    Hello Preetham,
    I recommend to post the first question to the [BusinessObjects Enterprise Administration|BI Platform; forum.
    The URL documenttion for opendocument R3 is [here|http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_url_reporting_opendocument_en.pdf]
    Best regards,
    Falk

  • Display technical name of a query in a web template ?

    Hi,
    I try to display in a basic web template the technical name of my query with a web item. In this order, I have tried to use the web item 'Text Elements' but how could I configure the latter in order to have only the technical name ?
    I have selected 'Display General Text Elements' in properties of the web item.
    In the property 'List of Text Elements', what is the couple of values that I have to configure ?
    Many thanks,
    CG.

    Hi,
    What you need to do is, keep a TEXT Web Item in the template.
    Then do not tick any of the options under Specific. Instead, go to List of Text Elements. In the first column, select General Text Symbol. In the next column type REPTNAME.
    This will give the technical name of the query in the output.
    Common text elements:
    u2212 technical name of the query (REPTNAME)
    u2212 description of the query (REPTXTLG)
    u2212 InfoProvider (INFOCUBE)
    u2212 key date for the query (SRDATE)
    u2212 accuracy of the data (date and time) (ROLLUPTIME)
    u2212 the person who wrote the query (AUTHOR)
    u2212 the last time the query was changed (date and time)
       (MODTIME)
    u2212 the last person to make changes to the query (MODUSER)
    u2212 current user (SYUSER)
    u2212 the last time the query was refreshed (date and time)
       (SYUZEIT)
    Try this. Hope it helps.

  • While saving Bex query with Technical name, it says Query already existing

    Hi,
    I am facing a problem. While saving a query withy its technical name (for example ZQYZMPR_01), it says that query is already existing. But when I search for the query in all tabs like Favourites, Roles, Infoprovider It is not found.
    I also checked a view V_REP_JOIN. In this view I find Query (ZQYZMPR_01) in MODIFIED version.
    I want to use my previous query instead of creating new one.
    Suggest, how can I retrieve my previous query that I am unable to search for.

    Saurabh
    Searching with descriptions may lead to confusion as there may be similar  descriptions to a query but just one technical name.  Check the query 'where used list' you may find answers.
    Can you check the query in RSZCOMPDIR ? If the query exist here, it must be there in the system.  Do the search with exact technical name ZQYZMPR_01 or ZQYZMPR*, you should be able to find.  Do not search in specific areas like roles etc..search directly by inputting the tech. name.
    Ferdinando - you can delete the query in RSZDELETE transaction.  While doing so, it will prompt for removal from all areas like roles, workbooks etc. Say 'yes' and delete, you will be able to assign the technical name to another query.
    Ramesh

  • Error while saving Views in Portal - Technical name not valid.

    Hi,
    When saving Views in Portal, I'm getting the message The Technical name of object QVIW is not valid. I've searched the forums but couldn't find any solution to this issue. We are on SP 16. Any help would be appreciated.
    Thanks & Regards,
    Hari

    Dear Harikrishna,
    while saving iviews in portal..
    it will prompt for some mandetory columns is it.. one is for description..
    and the iview name like iv<name of the template>.. this should be without space..
    and in the next page u should give technical name of the template as 'template=<name of the template'
    in this you should not give any space..finish and save the ivew..
    hope this would help you.

  • In the info cube insted of description need to display technical name

    Hi,
    I am displaying my info cube contents.But in the field name insted of description i need tehnical name of the filed to dispaly.can you plz anybody suggest me the solution.
    thanks
    Raj

    Hi Raj,
    Use T code : LISTCUBE
    you get 2 text boxes,  Object type : CUBE
                                     Data Target : cube name
    Check the option - Technical names.  F8
    You get all the technical names in the place of descriptions,
    hope this is fine
    Regards
    sreekanth

Maybe you are looking for